PC won't recover from sleep mode

i DON'T KNOW HOW TO RECOVER MY PC FROM THE SLEEP MODE?  WHAT'S THE PROCEDURE TOPOWER UP FROM SLEEP MODE? KV-BILL

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Compter won't wake from sleep mode

    My Pavilion 17 notebook computer, purchased in Oct. '13, won't wake from sleep mode; I must shut down and reboot each time.  I know this is not due to Windows 8, as I have another Win 8 computer that works normally.

    I've done some more experimentation and found a workaround. I had Sleep and the Screensaver both set to Never, and by activating the Screensaver the wake up issue has gone away. This doesn't change the fact that there is an issue with my ATV sleeping when it shouldn't and failing to wake up, but having the screensaver active stops it sleeping in the first place I guess.
    It's slightly annoying because I like to have music playing with the description and album art running, and this disappears when the screensaver comes on, but it is better than unplugging the thing every time I use it. Hopefully this will be fixed in the next update, because it only appeared in the last one.

  • Firefox crashes windows 7 when recovering from sleep mode

    Similar to the following:
    http://support.mozilla.com/pl/forum/1/627872?s=window+7+crash&as=s
    but not sure whether it depends on pages that are currently opened.
    Sometimes, when recovering from sleep mode on win7 (with only Firefox and VS2008 running), win7 crashes. What's important - It doesn't happen always, but still, it's annoying (Firefox starts with startpage only).
    I've been noticing this issue on different Firefox versions from Firefox 3.5 to 3.6.6.

    Same exactly problem here, very annoying when the computer goes to sleep mode and then Firefox locks up.

  • PowerBook won't wake from sleep mode

    My PowerBook G4 won't wake from sleep mode. I open the lid and nothing happens. I hold down the power button and nothing happens. I resetted the PMU and it will wake up and I am able to login and then it goes back to sleep mode. What should I do please help? And if my computer is dead, is there any way to retrieve my information saved on the hard drive?

    this would happen to me when my battery was dead. you test the battery life? (little button on bottom near battery)
    I'd make sure it was plugged in and let it charge for 10 minutes or so. then try restarting it if it doesnt wake up by itself.

  • My iMac has been acting sluggishly; taking unusually long to recover from sleep mode as well as it arbitrarily opening an app on its own. What is going on and can it be corrected?

    My iMac has begun to act suggishly and unpredictably lately. It takes unusually long for it to wake from sleep mode and often opens with a particular app (PSE) for no reason. What is going on? Is there a clean-up procedure(s) in addition to clearing history & cookies or perhaps a upgrade I missed?

    Hardware Information:
              iMac (21.5-inch, Mid 2010)
              iMac - model: iMac11,2
              1 3.6 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              ATI Radeon HD 5670 - VRAM: 512 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 6:4:21
    Disk Information:
              ST31000528AS disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (915.2 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Built-in iSight
              Apple Computer, Inc. IR Receiver
    FireWire Information:
              LaCie d2 quadra (button) 800mbit - 800mbit max
                        disk1s1 (disk1s1) <not mounted>: 32 KB
                        time machine backup (disk1s3) /Volumes/time machine backup: 1 TB (696.27 GB free)
    Thunderbolt Information:
    Kernel Extensions:
              com.avira.kext.FileAccessControl          (1.0.0d1 - SDK 10.8)
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.avira.antivirus.dbcleaner.plist 3rd-Party support link
              [System] com.avira.antivirus.ipm.loader.plist 3rd-Party support link
              [System] com.avira.helper.watchdox.plist 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.avira.antivirus.ipm.ui.plist 3rd-Party support link
              [System] com.avira.antivirus.odscan.default.plist 3rd-Party support link
              [System] com.avira.antivirus.scheduler.agent.plist 3rd-Party support link
              [System] com.avira.antivirus.systray.plist 3rd-Party support link
              [System] com.avira.antivirus.update.default.plist 3rd-Party support link
              [System] net.culater.SIMBL.Agent.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    User Login Items:
              iTunesHelper
    Internet Plug-ins:
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
              FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              OVSHelper: Version: 1.0 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              Silverlight: Version: 4.1.10329.0 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions:
              DivX Plus Web Player HTML5 <video>: Version: 2.1.2.126
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              DivX  3rd-Party support link
              Flash Player  3rd-Party support link
    Old Applications:
              TomTomHOMERunner:          Version: 2.9.5.1974 - SDK 10.4 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 930.71 GB Disk used: 78.36 GB
              Destinations:
                        \ [Local] (Last used)
                        Total size: 931.39 GB
                        Total number of backups: 182
                        Oldest backup: 2010-12-08 22:28:38 +0000
                        Last backup: 2014-02-26 19:40:36 +0000
                        Size of backup disk: Adequate
                                  Backup size 931.39 GB > (Disk used 78.36 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   1%          WindowServer
                   1%          EtreCheck
                   1%          savapi
                   1%          Perfect Diet Tracker
                   1%          eprocsd
    Top Processes by Memory:
              287 MB          savapi
              258 MB          avguard.bin
              119 MB          softwareupdated
              98 MB          com.apple.WebKit.WebContent
              78 MB          Finder
    Virtual Memory Information:
              94 MB          Free RAM
              1.70 GB          Active RAM
              1.67 GB          Inactive RAM
              546 MB          Wired RAM
              1.26 GB          Page-ins
              0 B          Page-outs

  • Laptop won't awake from sleep mode

    Toshiba PSCBLU-01L003
    I've had this laptop for a few months, and rarely move it from my office desk.  When I leave it in active mode, the screen will eventually go dark and the computer will awaken when I touch the keyboard.
    However, if I close the lid, or lock the screen, the computer will not awaken from sleep mode.  I get a blank screen that the only remedy is to remove the laptop from the power cord, and remove the battery to restart.
    All drivers and software are up to date I keep them updated.
    Any suggestions, would be appreciated.
    Solved!
    Go to Solution.

    Then I would change that setting to something else, click Save Changes and restart the computer.  Then I would go back and change the setting back to Sleep, Save changes and restart again and see if that cures it.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Helix 20CG won't wake from sleep mode

    Hi
    After doing all updates (windows/lenovo) and ensuring latest lenovo power managers are installed, my Helix 20CG will still not wake from sleep mode. This problem has been persistant since the second day I had the computer.
    If the Helix is in sleep mode for more than 2 hours and you press the power button, the screen will not turn on. However if the tablet is docked on the ultrabook keyboard the green light on the Fn key will briefly flicker. Also if you press the power button and then immediately hit the windows button on the bottom of the tablet it will vibrate a bit, but in both cases the screen does not turn on.
    After continuously hitting the power button for ~5-10 minutes the screen will eventually turn on.
    Has anyone else experienced this problem?
    Thanks,
    Brandon

    For the past week, I've been using the Helix and just shutting it down every time I walk away from it. This morning I put it in sleep mode walked away for an hour or so and when I went to wake it up, by pressing the power button, the green light on the Fn key flashed but it would not wake up. I held the power button down for 4 seconds to do a hard reboot. I checked the system log, and when the computer was "asleep" the following warnings were recorded:
    Level    Date and Time    Source    Event ID    Task Category
    Warning    12/13/2014 11:08:12 AM    Microsoft-Windows-DNS-Client    1014    (1014)    Name resolution for the name imap.gmail.com timed out after none of the configured DNS servers responded.
    Warning    12/13/2014 10:06:28 AM    Microsoft-Windows-DeviceSetupManager    123    None    The DSM service was delayed by 289 seconds for a driver query/download/install on device 'HID\VID_17EF&PID_6067&MI_02\8&111A4E3A&0&0000'
    Warning    12/13/2014 10:01:38 AM    Microsoft-Windows-DeviceSetupManager    123    None    The DSM service was delayed by 205 seconds for a driver query/download/install on device 'HID\VID_17EF&PID_6067&MI_01&COL03\8&12BCEF88&0&0002'
    Upon start up, the following was recorded:
    Level    Date and Time    Source    Event ID    Task Category
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    201    None    A connection to the Windows Metadata and Internet Services (WMIS) could not be established.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    201    None    A connection to the Windows Metadata and Internet Services (WMIS) could not be established.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    202    None    The Network List Manager reports no connectivity to the internet.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    202    None    The Network List Manager reports no connectivity to the internet.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    200    None    A connection to the Windows Update service could not be established.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    202    None    The Network List Manager reports no connectivity to the internet.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    200    None    A connection to the Windows Update service could not be established.
    Warning    12/13/2014 11:36:39 AM    Microsoft-Windows-DeviceSetupManager    202    None    The Network List Manager reports no connectivity to the internet.
    Error    12/13/2014 11:36:34 AM    DPTF    256    GENERAL    Intel(R) Dynamic Platform and Thermal Framework : ESIF(8.0.10002.14) TYPE: ERROR FUNC: rsrc_file_extract_resource_file FILE: rsrc_file.c LINE: 368
    Error: Unable to create resource file.
    Error    12/13/2014 11:36:34 AM    DPTF    256    GENERAL    Intel(R) Dynamic Platform and Thermal Framework : ESIF(8.0.10002.14) TYPE: ERROR FUNC: rsrc_file_extract_resource_file FILE: rsrc_file.c LINE: 368
    Error: Unable to create resource file.
    Warning    12/13/2014 11:36:26 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WudfRd failed to load for the device HID\INV6500\5&3adb0959&0&0000.
    Warning    12/13/2014 11:36:25 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ACPI\VFSI6101\1.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0005.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0003.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0002.
    Warning    12/13/2014 11:36:24 AM    Microsoft-Windows-Kernel-PnP    219    (212)    The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&3.
    Critical    12/13/2014 11:36:23 AM    Microsoft-Windows-Kernel-Power    41    (63)    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Error    12/13/2014 11:36:21 AM    volmgr    46    None    Crash dump initialization failed!
    Error    12/13/2014 11:36:33 AM    EventLog    6008    None    The previous system shutdown at 11:23:57 AM on ‎12/‎13/‎2014 was unexpected.
    Does anyone know what these devices are or have any recommendations for getting this thing to be able to wake up from sleep mode?
    Thanks!

  • Computer won't wake from sleep mode

    i've been having random issues with waking my mac pro os x 10.6.8 from sleep mode via apple bluetooth mouse and keyboard. this issue only happens occasionally (1-2 times per month) with no real pattern that is evident. the only way to wake the computer during this type of event is to turn it off and restart. any thoughts?

    i've been having random issues with waking my mac pro os x 10.6.8 from sleep mode via apple bluetooth mouse and keyboard. this issue only happens occasionally (1-2 times per month) with no real pattern that is evident. the only way to wake the computer during this type of event is to turn it off and restart. any thoughts?

  • Power Mac G4 MDD won't wake from sleep mode

    I have a Power Mac G4 MDD 1.25GHz with a 15" Apple display and running 10.4.
    I can not wake the computer up from the sleep mode. It will not respond to the mouse moving, a mouse click, a keyboard key, the power button on the display or the power button on the computer.
    The only thing I can do is force the computer off by holding in the power button (on display or computer) and restarting the computer.
    The computer is set to go to sleep after 1 hour of no use (or the issue happens if I put it to sleep).
    Any thoughts would be great.

    This is for a Mac that won't sleep.
    Here is KB article HT1776 with their tips.
    Mine follow;
    USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.If you've set your Mac to receive faxes, it may not be able to sleep. It might also have a damaged preferences file.
    If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Receive Faxes On This Computer box.
    If that doesn't work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
    If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
    Hope this helps!
    P.S. One member here reported this (Michael Gleason);
    "I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
    Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB cards.
    Also, here is Apple doc.#305262 about PCI cards and sleep.
    tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
    After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
    Tristan Currier noticed this; "I have a Canon printer(shared) and my imac would not sleep. I opened up printer/fax in system prefs and noticed it said the printer was in use when it was off. Opened up the printer queue and noticed about 7 pending documents. Deleted them all and now it sleeps.
    Check the printer queue!"
    Good Luck!  DALE

  • IMac won't wake from sleep mode after latest update

    Hello, I have a Late 2013 27-inch iMac that has started acting strange, lately. After installing update 10.10.3, my iMac almost will regularly not wake once it enters sleep mode, after being idle for a certain period of time.
    Is anyone else having this problem, and/or have any solutions for this?
    Thank you in advance!

    Step 1
    Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully and don't skip any of the steps, including the ones under the heading Additional troubleshooting. If you don't understand any of the steps, ask for guidance.
    Also note that if you replaced the internal hard drive with an SSD, or if you're starting up from an external SSD, then that device may be causing the problem. Check the SSD manufacturer's website for a firmware update. The only solution may be to reinstall the original drive or avoid sleep altogether.
    Step 2
    If you're running OS X 10.8.5 or earlier, from the menu bar select
               ▹ System Preferences... ▹ Accessibility
    If the checkbox at the bottom marked
              Enable access for assistive devices
    is checked, uncheck it and test.
    If you're running OS X 10.9 or later, select
               ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
    If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
    Step 3
    In the Energy Saver pane of System Preferences, uncheck the box marked
              Put hard disks to sleep when possible
    Step 4
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.
    Step 5
    This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
    In the search box in the window's toolbar, enter "powerd" (without the quotes.)
    You may see one or more lines like this:
    com.apple.message.signature: Platform Failure
    If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Step 6
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down.
    You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Laptop won't wake from sleep mode.

    My laptop will sometimes spontaneously go into sleep mode and won't awake unless I remove the power cord and battery. At the same time I notice the top of the case/tracking pad get very hot. Sometimes when typing normally the cursor location will jump around your text and mess up your sentences. This is very annoying and I can't seem to make this stop from happening. Another thing I am noticing is system performance is slowing down, and the HDD is making a humming noise. Not sure if these are all related.
    I've seen/read some threads on the sleep mode issue, but not the rest. Any seen anything like this? Laptop is still under warantee and I might just have to take it in, but I want to make sure I have issues with the hardware.
    System details: G4 15" Powerbook, 1.5 Ghz, 60 GB HD, 512 MB Ram.
    PowerBook G4 1.5 Ghz   Mac OS X (10.4.8)  

    Welcome to the Apple discussions.
    You've raised a few issues. First, to try a fix for the sleep/power issue, reset your Power Mangement Unit described at http://docs.info.apple.com/article.html?artnum=14449
    Next, run your Apple hardware test. Insert the first OS X DVD that came with your system (should say AHT Version n.n in small print on the DVD), and reboot holding the option key down. Choose Apple hardware test, and follow directions. Choose the extended test. If you have one of the TechTool programs, that does the same testing. Does this point out any issues?
    Performance slowing down...how much data do you have on your hard drive? You want to keep at least 10% free for system usage. Do you keep your system on 24x7? If not, there is a chance some of the system disk log maintenance won't run. You can run a program like MacJanitor or OnyX to clean them up. MacJanitor can be found at http://personalpages.tds.net/~brian_hill/macjanitor.html and OnyX can be found at http://www.titanium.free.fr/pgs2/english/download.html . I prefer OnyX because it does much more than run the Apple scripts, however, either tool will run the scripts.
    When the top of your case seems hot, you should look at your Activity monitor, located on your hard drive in applications/utilities, to see if anything is causing the CPU to run up to 100%.

  • Ibook won't wake from sleep mode

    I have an ibook G4. I have a slid show for a screen saver, and the display is set to sleep when the computer is inactive for 15 minutes. Recently the computer does not wake from sleep. It is stuck on a screen saver picture, and does not wake up when i press a key. The only way to access the computer is to shut it down by pressing the Start button.
    I have tried to remove the slide show, but no difference.

    I would suggest resetting the PMU. Since the PMU has control over sleeping and waking, resetting it may help.
    Every time you have to do a forced shutdown (by pushing the start button) instead of a normal one, there is a chance of hard drive damage and you should repair the hard drive, either by booting into Safe Mode or starting up from the Mac OS X Install Disc by inserting the disc and restarting your computer, holding down the C key at the end of the startup chime. Then choose Installer > Open Disk Utility (in Panther) or Utilities > Disk Utility (in Tiger) and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive. Once you have repaired the hard drive with either Safe Mode or the Install disc's Disk Utility, then start up normally and repair permissions from Disk Utility in the Utilities folder on your hard drive.
    For future reference, you may want to try posting in the iBook G4 Forum with questions.
    You have posted in the iBook G3 (Dual USB) Forum.

  • WIndows 10 Not recovering from Sleep mode. Hard resetting every time.

    I have a HP Pavilion g6-2320tx Notebook PC with WIndows 10. Everytime I put the Notebook on Sleep mode, it gets hard reset next time i open the lid. I have tried upgrading the Graphics driver from Device settings and have looked for updates for all other driver suing HP support assistant. Problem still exists.  Anyone with a solution? Please help.

    Hello  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your and issues with a BSOD and the error message is CRITICAL_PROCESS_DIED on your HP Pavilion g6-1b60us Notebook. I recommend to restore the BIOS defaults.You could restore the BIOS with this document selecting the reloading the BIOS default settings.You could try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. I hope this fixes thing for you, please let me know. Thanks.  

  • NB200-12W won't wake from sleep mode

    I have only had my netbook for a couple of days so I'm not quite used to it yet though I'm well used to Windows 7 . I close the lid to turn on sleep mode but then it's difficult to wake the computer up. I often have to hold down the power switch to force a shut down and then reboot. Not something I want to do.
    I have a USB mouse plugged in and I've enabled the USB wake up facility but nothing works. I open the lid and press keys, including trying a quick press of the power button but nothing happens. Has anyone any ideas?
    Thanks

    Hi mate
    I wake up mu notebook from hibernation mode pressing the power button.
    I dont need to force the shut down. Just shortly press the power button in order to wake up the unit.
    In your case I recommend checking if a BIOS update is possible.
    You should check what version is available on the notebook and what version has been released. If newer version is available then update it!

  • IMac won't wake from sleep mode

    Just wanted to share my experience in case anyone has this issue.
    Computer would only start after sleep mode if I unplugged the power cord. The power button would not do anything, even if I held it for a long time.
    Shut down and start up would work normally. Only effected sleep mode.
    After much trouble shooting I found that I had a bad USB hub. Everything on the bad USB hub would work fine so I didn't suspect it.

    Very interesting, thanks for sharing.

Maybe you are looking for