PC won't start w/o CMOS re-set?

See my sig- This has happened before when I had my 3500+ chip but not to this extent! Now it will not start at all without a CMOS reset, push power button and nothing turns on at all- clear cmos and it boots up. I had to restore my C drive when I got home today so what ever happened must have fubared my OS?
I have not been having any re-boots or other anomalies lately. Everything has been running smooth. The only changes I have made is the memory and CPU which has been about 2 weeks ago, and like I said this did happen occasionally with the old chip & memory but it would always restart with out to much fuss!
The only other thing I can tell you is Dimm slot 4 on this board has gone bad and now am using slots 1&2. See also I have the PC Power & Cooling 510 Deluxe and my rails look normal.
Thanks in advance!
Plumbergeek

Memory is compatible per Corsair, I have run Memtest some but not throughly.. I'll run it longer. As far as Dimm 4 I don't know what happened but I have always run in dual channell in slots 3&4 and used to get some BSOD's but I just thought is was flakey M/B because I was'nt OC'ing the 3500+
But when I installed these double sided 2X1 gig ram it would not boot with it in 4 but would in 1&2
I'll get a new battery also.
I am ready to move to the NForce 4 board anyway.......I am tired of the Neo2

Similar Messages

Satellite P300D-110 won't start-up normally

My P300-100D won't start-up normally.
It hangs after showing the announcement that Windows is being started.
First I have to start-up in Safe-mode, and if I'm lucky it will start normal after choosing 'restart".
The strange thing is that this problem only appears after the laptop has been shut-down for some time.
If I start up short after a shutdown, there seems to be no problem. I'm using Windows Vista Home Premium with SP1.
Anyone any idea?
Tnx in advance!

A couple of things to think about or try in order to burrow further into the problem:
1/
If you hibernate or go to standby rather than shut down, what happens?
2/
What is "a long time"? We could be waiting "a long time" for your reply to #1 above. I was wondering whether your CMOS battery was not holding its charge or something. That's a long shot.

PC Won't Start - No Power?

I've been having some serious power issues with my 3-month old PC for a few weeks now. All was working perfectly fine until the PSU (450w "Zorro" PSU - came with my case) accidentaly got switched to 115v mode while still plugged into the computer and plugged into the 230v mains.....oops. Needless to say it did not survive the experience, and it was sent off and duly replaced with an equal model.
Then, I installed this PSU into the case and plugged it all in. The computer booted, as did windows, and all seemed OK.... at the desktop at least. But, whenever I got into a CPU and graphic intensive game the PC shut down. And wouldn't turn on. That was, untill I took the power plug out of the back of the PSU and then re-inserted it, at which point I could start the system up again. And once agian it would crash, most often while playing Unreal Tournament 2004 "Carball" mod. Prime 95 also crashed the PC after running for about 1h30mins.
Anyway, thinking the PSU was at fault i returned it once again. This time, the company tested it and said it ran perfectly for 4hrs with no faults. So, upon recieving the PSU back, I duly reinstalled it into the case. After reconnecting all of the cables etc, I pressed the power button. Nothing. Nada. System just won't start at all. And i'm completely baffled as to why.
I have tried plugging in the power connectors to the Mobo (K7N2 Delta ILSR) again, both the 20-pin and the 4-pin one. I have tried pushing in the power switch connector again, and tried reversing it, incase I had it pushed in the wrong direction, I have tried resetting CMOS and setting J10 to safe mode. I have also checked that the CPU cooler is attached and plugged in properly. I am stuck for ideas here, I really am. AFAIK the system hasn't been touched since I took the SPU out, so I'm not sure why it isn't even booting at all at the moment.
If anyone has ANY ideas about this, please don't hesitate to mention, even if it is the stupidest idea you've ever had lol, I'm really stuck with this. I'm thinking of taking everything right out of the case and installing it all again, but I want to know if i've done something really stupid and abvious before I do this. Thanks
BTW, my system specs are as follows.
Zorro PC case AKA Raidmax Scorpio 868
450W Zorro PSU. +5v 25A, +12v 30A
MSI K7N2 Delta ILSR
2x512 Sticks Samsung M3 3,3,3,8 RAM
Power Color Radeon 9800 Pro 128mb
D-Link DWL 520+ 22mbps wireless network
AMD Athlon XP 3000+ 1.65v Stock Settings
Zalman CNPS 6000 CPU cooler @ Max
5xCase Fans
MSI Audio Bracket Thing
40GB Maxtor HDD
60GB Maxtor HDD
Samsung CD-RW and DVD (not writer) 52x48x24x16

That was what iI am starting to think now, but there are some problems with that theory. Firstly, when the PSU blew up, after I got the replacement the PC did actually start up, and could run at the desktop for absolubly ages, >10hrs, while playing music and browsing the net, but when running stressful programs it turned off. Also, I tried a less powerful 400W PSU in the system, and that seemed to perform perfectly fine indeed. I also ran Memtest 86+ for a while, it did 6 passes, I think, without problem. I do have other systems, but none of them would support the proccessor or RAM.
I think the problem MUST lie with either one of 3 things.
1) The power button connection has come loose. Although I have checked it on the Mobo I can't actually check it at the power button itself as it is hidden. I might try and multimeter the cable to see if it is connected.
2)The power connectors to the Mobo. These connectors could be broken so the system isn't getting any power. Alternatively it could be the slots on the Mobo.
3)The CPU fan connector. This could be damaged and cetain motherboards don't let the power be started up without the fan being connected. Dunno if the K7N2 series does though.
4)The mobo itself is damaged and won't work.
Whats also puzzling though, is that the system kept shutting itself down and then wouldn't turn on again unless the power plug was removed from the back and reinserted. Any idea why this might happen?
Also, on the components damaged issue. The motherboard should start up without the processor, Ram, Video card etc installed right? Otherwise what is the point of the MSI D-Bracket LED diagnostic system thing? This displays certain LED patterns when the system has a fault, for example a faulty or damaged processor etc. Therefore the systme must be able to get power without a working processor etc. For this reason I think it must be one of the reasons mentioned above.

My HP DC7100 won't start, flashing red light 5 times?

My HP-DC7100 won't start up and it when I turn it on it flashes the red light 5 times, I looked it up and it apparently meant that it was a memory error, now I thought that was kind of weird because the RAM's were working just fine before this incident. Although this was straight after I done something, the case wasn't on properly and I pushed it into place and then the screen went fuzzy and it automatically turned off. Then I tried to start it up and now it flashes red 5 times, and I haven't even installed any additional rams, these are the RAM's that came with it. Please help!
Anyone??
This question was solved.
View Solution.

Try clearing the CMOS and see if that helps.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00189283/c00189283.pdf
See pages B-3 and B-4.
It is possible you wrecked the PC by whatever you did here..."Although this was straight after I done something, the case wasn't on properly, and I pushed it into place and then the screen went fuzzy and it automatically turned off."
That ain't good...

T400 won't start

Hello,
My t400 all of a sudden won't start. The battery and power lights turn on for a half a sec then off and then on again and so on. Tried disconnecting battery, cmos battery. But problem presists.
Any ideas?
Thank you

Pleaase do not post serial numbers here in the publicly visible boards.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

K7t pro2 won't start

Hi all, I have a k7T Pro2 board that come from another machine, i put it in a tower i have and now it won't start.
Does this board need a mininum size power supply to boot up. I have a 230v 3A 50-60Hz.
The 512mb stick of ram works as well as the video card, i tested them in another pc.
When i reset the cmos, i get a different D-led signal every time. top green, red,red,red. or top red, green, red red. or top red, green green, red these 3 are what i get the most. The 800 cpu also was tested into another machine.
Does anyone know what else i should try
thanks

Hi,
Since you posted in the Intel Forum I moved you on over to the Via forum.
What it the wattage of the Power supply?
-rob

MSI H61M-P23 (B3) Successfuly updated bios won't start the pc.

Hey guys,
I have a major issue now. I accidentally started updating bios on my motherboard, but after tackling some major problems regarding the usb format and missing files, I have managed to get it updated successfully. Now I have another problem where my PC just won't start. I won't even give me a beep. Basically what happens is that it starts working for a second. The fans spin, and my keyboard and USB LEDs flash for a second and then it does that over and over again without even starting up.
What do I do?

Try clearing cmos (>>Clear CMOS Guide<<) else the board is bricked as the update failed. You can either have it flashed with an SPI flash programming device by a pc-shop or MSI (not for free of course), replace the board or rma it if still under warranty (what is most likely not the case).

PowerMac MDD 1.25 Dual G4 won't start..

Abruptly this PowerMac MDD 1.25Ghz Dual G4 won't start up. The button lights up, but there is no other reaction from the PowerMac. I have already reset the PMU on the logic board. I have replaced the CMOS battery. I removed the hard drive and copied important data off it. Any other suggestions before taking it to my local Authorized Apple Repair Station.

wouldn't it be more prudent to just replace the "wind tunnel" power supple
As a matter of troubleshooting, no.
After testing and confirming, yes.
Used and refurbished power supplies are available on eBay.
The 360W MDD PSU, having revamped fans, is the desireable one.
I'm thinking of just taking it in and have them check it out.
A third party repair service might be fine. Apple will just say it's too old.
I'm sure I can replace the power supply myself.
http://www.youtube.com/watch?v=uEfNH1DaJUo
Where is this capacitor located? inside the power supply?
Inside, where it is very dangerous for the non-trained to access and repair.
PSU components hold deadly charges long after they are unplugged.
Read more on some of the possible faults:
http://www.badcaps.net/forum/showthread.php?t=7165
Pro repair service here:
http://www.galaxyhp.com/
and here:
http://natramelec.com/g4powersupply/

SAP won't start after recabeling sap system

Hi, 
 
I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone have an idea what could be wrong? 
 
Kind regards, 
Bas 
 
 
trc file: "dev_disp", trc level: 2, release: "700" 
 
 
command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE 
command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap 
 
ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll") 
Error 126 = "The specified module could not be found." [dlnt.c 255] 
sysno 00 
sid IDE 
systemid 562 (PC with Windows NT) 
relno 7000 
patchlevel 0 
patchno 221 
intno 20050900 
make: multithreaded, Unicode, 64 bit, optimized 
pid 3252 
 
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) 
length of sys_adm_ext is 576 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c 1287] 
ShmProtect( 5, 3 ) 
SigIInit: ok (whoami=1) 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 11 installed (SigISegv) 
Pipe created:
.\pipe\SAP3252 
SigIInit: Create Message Thread 
SigIRegisterExitRoutine: exithandler installed (DpHalt) 
SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt) 
 shared lib "dw_xml.dll" version 221 successfully loaded 
 shared lib "dw_xtc.dll" version 221 successfully loaded 
 shared lib "dw_stl.dll" version 221 successfully loaded 
 shared lib "dw_gui.dll" version 221 successfully loaded 
 shared lib "dw_mdm.dll" version 221 successfully loaded 
dp_loc_queue_max_blk: 40000 
mshost: >sap< 
DpSetCancelStrat: set timeout 0 at level 0 
DpSetCancelStrat: set timeout 5 at level 1 
DpSetCancelStrat: set timeout -1 at level 2 
DpSetCancelStrat: set timeout -1 at level 3 
rdisp/softcancel_sequence : -> 0,5,-1 
softcancel_sequence: >0,5,-1< 
use internal message server connection to port 3900 
msserv: >3900< 
dp_bufreftime: 120 sec 
dp_btctime: 60 sec 
dp_autoabaptime: 300 sec 
dp_autothtime: 60 sec 
dp_autojavatime: 300 sec 
dp_vm_alarm_time: 100 msec 
dp_calldelayed_time: 60 sec 
dp_startup_time: 20 
dp_noptime: 0 sec 
dp_keepalive: 1200 sec 
dp_keepalive_timeout: 60 sec 
dp_ms_keepalive: 60 sec 
dp_ms_keepalive_timeout: 300 sec 
switch off dp-keep-alive for old temus 
dp_gui_auto_logout: 0 sec 
dp_spoolalrm: 60 sec 
dp_softcancel_timeout: 5 sec 
rdisp/wp_restart_interval : 300 sec 
DpISetTrcLog: trc logging active, max size = 20971520 bytes 
dp_rfc_check_active: 1 
dp_rfc_check_all_rfcs: 0 
dp_http_check: 1 
check_master_slave: 0 
NiHsLGetServNo: got service name 'sapdp00' from operating system 
NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200 
NiHsLGetServNo: got service name 'sapgw00' from operating system 
NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300 
NiIMyHostName: hostname = 'sap' 
NiHsLGetNodeAddr: got hostname 'sap' from operating system 
NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250 
NiHsLGetHostName: found address 192.168.2.250 in cache 
NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq) 
Mon Oct 26 16:14:29 2009 
NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system 
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds 
Mon Oct 26 16:14:45 2009 
NiHsLGetHostName: address 1.0.0.1 not found by operating system 
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds 
NiHsLGetServNo: got service name 'http' from operating system 
NiIGetServNo: servicename 'http' = port 00.50/0080 
NiHsLGetServName: port 1F.90/8080 not found by operating system 
NiHsLGetServName: port FC.2B/64555 not found by operating system 
NiHsLGetServNo: service name 'sapdp9988' not found by operating system 
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521] 
SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff) 
SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff) 
SigIRegisterRoutine: alarm handler installed (DpSigAlrm) 
SigIRegisterRoutine: handler for signal 2 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 15 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit) 
MtxInit: 30000 0 0 
DpInitMtx: MtxInit o.k. 
PPID environment not found 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp) 
 
 
trc file: "dev_w0", trc level: 2, release: "700" 
 
* 
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M
M command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
M command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
M command line arg 2: wp_id=0
M
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
[dbcon.c 4905]
M sysno 00
M sid IDE
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4000
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c 1349]
M Mon Oct 26 16:14:47 2009
M SigIInit: ok (whoami=2)
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
M Pipe created:
.\pipe\SAP4000
M SigIInit: Create Message Thread
M SigIRegisterExitRoutine: exithandler installed (wp_halt)
M SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
M SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
M SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
M SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
M SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
I MtxInit: 30000 0 0
M DpInitMtx: MtxInit o.k.
M WaitParent Thread 3252 start
M WaitParent Thread 3252 created
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
 
 
trc file: "trans.log" 
 
 
4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.10.2009 - 15:06:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 21 15:06:06 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
4 ETW000 7580 0.007580
4 ETW000 [dev trc ,00000] using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 16 0.007596
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 19 0.007615
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 38 0.007653
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211) 307 0.007960
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 26 0.007986
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 24 0.008010
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.008056
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 21 0.008077
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008092
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920) 20 0.008112
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008127
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.008144
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.008194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768) 31 0.008225
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.008242
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.008255
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 16 0.008271
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

<div class=Section1>
Natalia,
 
To answer your questions:
1. Did you create the SAP ticket, where this problem is
reported?
I didn't report it to SAP because it is just an IDES test
system. I can easily do a reinstall, but i would like to know the cause and
solution to this problem.
 
2. Do you have dbsdbslib.dll at this location? What version?
Yes, i have the dbsdbslib.dll at location
D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
Version is 7000.221.16.41497 (kernel 7.00 SP 221)
 
your requested output:
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ideadm\Application Data
CLIENTNAME=BSF02
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=SAP
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=ada
DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
DIR_PROFILE=D:\usr\sap\IDE\SYS\profile
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ideadm
JAVA_HOME=C:\j2sdk1.4.2_21-x64
LOGONSERVER=
SAP
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
SAPLOCALHOST=sap
SAPSYSTEMNAME=IDE
SESSIONNAME=RDP-Tcp#47
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\2
TMP=C:\WINDOWS\TEMP\2
USERDOMAIN=SAP
USERNAME=ideadm
USERPROFILE=C:\Documents and Settings\ideadm
windir=C:\WINDOWS
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
 
 
</div>

My iPhone 5 won't start!

My Iphone 5 won't start and tells me to connect the phone to ITunes but nothing happens when I do. The phone doesn´t show up in ITunes. What to do?

Apologies, 11.0.4 is the most recent of course...
You'll need to enter DFU mode.
Connect the iPhone to your computer and launch iTunes
Turn the iPhone off (hold down the power button at the top of the iPhone)
Hold down the sleep/power button and home button together for exactly 10 seconds, then release the power button
Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected
Hopefully this should work, with you being able to restore the device in iTunes.
However, be warned that this will erase all content on the iPhone, content you can restore if you have saved backups on your Mac/PC or on iCloud.

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

All of a sudden Photoshop won't start [on a Macbook Air]

Dear all,
I'm on a MacBook Air with OS X 10.10.2, and I use Photoshop about once a month, but now I really need it, and it won't start:
- Immediately after I click on the Photoshop icon I get "Adobe Photoshop CS5.1 cannot be opened because of a problem." And when I click on the "Report..." button I get a very technical message (see below).
- I've used Photoshop on this machine for about a year with no problem, but recently I had a problem and needed to restore from my TimeMachine backup.
- I don't know if the problem occurred immediately after the restore or not.
- I've read innumerable threads on various forums, but nothing describes my problem exactly. I suspect a problem with my paths and permissions (since I read a report that restoring from a TimeMachine causes such problems occasionally), but I don't know which path is corrupted/missing/unreadable.
- I've tried creating a new admin account and starting Photoshop from there. It didn't work.
- I don't mind reinstalling, but I don't have an installer image. I started with Photoshop 6, then updated to CS2, CS4 and eventually CS5. I do have all the serial numbers but not all update-images.
I would appreciate any hints on how to further diagnose and some the problem.
Thanks a lot in advance!
Bojidar
And now here is my exact error message:
Process: Adobe Photoshop CS5.1 [12426]
Path: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Identifier: com.adobe.Photoshop
Version: ???
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Adobe Photoshop CS5.1 [12426]
User ID: 501
Date/Time: 2015-05-03 21:53:39.840 +0200
OS Version: Mac OS X 10.10.1 (14B25)
Report Version: 11
Anonymous UUID: A0DC6EA7-1973-1B68-EFC7-5D60106F084D
Sleep/Wake UUID: 1FA6367C-EEB2-4F46-8773-EBB176EAEAC7
Time Awake Since Boot: 230000 seconds
Time Since Wake: 2900 seconds
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/adobe_caps.framework/Versions/A/adobe_caps
Referenced from: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Reason: image not found
Binary Images:
 0x7fff6f1c1000 - 0x7fff6f1f7837 dyld (353.2.1) <4696A982-1500-34EC-9777-1EF7A03E2659> /usr/lib/dyld
Model: MacBookAir6,2, BootROM MBA61.0099.B18, 2 processors, Intel Core i5, 1.3 GHz, 4 GB, SMC 2.13f15
Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0256F, 251 GB
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

Did tou try resetting the preferences usins the Photoshop keys as your tryind to start Photoshop. Toy cab also use Windows explored or Mac finder deleteor rename you userid Photoshop preferende if you change you OS preferences to be able to see hiddeb files and folders. Do you read the link I posted?
Restore preference files to default
In this video, learn the two methods of resetting your preference files back to default: Manual preference file removal and Keyboard Shortcut method (starts at 5:05)
by Julieanne Kost
To restore preferences quickly using a keyboard short cut:
Press and hold Alt+Control+Shift (Windows) or Option+Command+Shift (Mac OS) as you start Photoshop. You are prompted to delete the current settings. The new preferences files are created the next time you start Photoshop.
Note: Using the keyboard shortcut, preference files for custom shortcuts, workspaces, and color setings will also be reset to default.

X11 won't start anymore!

Hello,
this is a desperate call: I am at a conference with my MBP, (10.6.7, all updates done). I need Matlab for my presentation, which needs X11.
X11 (and XQuartz) decided that they won't start anymore: the icon bounces in the dock for a while, then sits there without the little light underneath, and X11 is "non responding".
The logs show something like this.
I have googled and searched: similar problems once in a while appear but no posted solution.
I tried:
1) reinstalling XQuartz (I would reinstall X11, but how? I do not have the disks with me, I am away!)
2) from an admin account
3) create a new account.
4) repair permissions.
5) reinstall the font update from Apple that was recently issued.
HELP PLEASE!!!
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: DISPLAY ("/tmp/launch-bHvQen/org.macosforge.xquartz:0") does not match our id ("org.x"), unsetting.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: main(): argc=2
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -psn_0_278596
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Waiting for startup parameters via Mach IPC.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Could not connect to server (DISPLAY is not set). Starting X server.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Launching /usr/X11/bin/startx:
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /bin/sh
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -c
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[2] = /usr/X11/bin/startx
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Scanning user font directories to generate X11 font caches
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Updating FC cache
11-05-16 5:02:01 PM     org.x.privileged_startx[20781]     font_cache: Scanning system font directories to generate X11 font caches
11-05-16 5:02:01 PM     defaults[20791]
The domain/default pair of (org.x.X11, dpi) does not exist
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Couldn't create cookie
11-05-16 5:02:02 PM     org.x.privileged_startx[20781]     font_cache: Updating FC cache
11-05-16 5:02:04 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Done
11-05-16 5:02:04 PM     org.x.privileged_startx[20781]     font_cache: Done

Here is the solution: there was nothing wrong with x11 per se!
The problem was that about 30 files in /usr/bin (like gzip, egrep, hexdump etc) had been hosed (they had 0 file size). The puzzling messages was due to the fact that startx uses hexdump, which was simply silently doing nothing (since it had 0 size!).
I do not know what or when these files were zeroed: I suspect a recent OSX update which did not complete and I had to forcefully reboot.
I have fixed it enough to work (copying those files from another mac), but who knows what else lurks beneath the surface of apparent serenity!
I am actually surprised that the whole system did not stop functioning completely.
MORALE: if something looks strange in the logs with x11 or other apps, check the file sizes in your /usr/bin, you may be surprised too!

24" iMac won't start when iPod is connected

My 24" iMac won't start up/restart if my iPod is already connected to it. If I restart with the iPod connected, I just get a gray screen (with no apple logo) forever. Has anyone else experienced this problem? If so, any solution? I have Windows installed with boot camp, don't know if that's the problem, but I tried reseting the p-ram, but to no avail...
Intel iMac 24", 7600 GT, 500GB, 2GB. Titanium Powerbook 667 MHz G4, loaded. Mac OS X (10.4.7) 30 GB iPod Video

My suggestion would be disconnect the iPod. That's just me though.
http://docs.info.apple.com/article.html?artnum=93953
I'm guessing Boot Camp is the culprit. Whatever emulated BIOS it's using doesn't like the iPod as a startup disk.

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

PC won't start w/o CMOS re-set?

Similar Messages

Maybe you are looking for