Pc wont start with new p4 2.60c ht ready

just installed a p4 2.6c hyperthreaded cpu in place of a 2.4
pc post booted and said dram timmings to tight then booted into xp home and then rebooted and also recet my bios .... so i recet the bios up again the computer would load itself up but i got no signal to my monitor the power light stayed on standby im stumped so im back to old cpu p4 2.4 all works ok
any ideas
system
bios 1.8
msi 875 neo
1 gig ddr 333 danelec memory
audigy sound card
seagate ata 120 hdd
old cpu p4 2.4
new cpu p4 2.60c ht ready
lite-on dvd reader master
lite-on cd writer 52 speed on slave
19 inch ctx monitor
msi 5600 td256 ddr grafics card
450 watt psu

:beerchug:thanks danny
i took the cpu back and exchanged it and bought ddr 400 memory an all is fine
the cpu was duff

Similar Messages

Satellite C55-A-1MW wont start with new RAM inserted

Hey .
I hope to find someone that can help me.. I've bought ram-memories and tried 4 different memories in my Satellite C55-A-1MW. But every ram card I insert makes the computer unable to start.. it will light up just to shut down again.
Is there some compability issue or anything? I've used 2 different aData Ram extensions car, 1 4gb and 1 2gb . the 4gb card was 1333 mhz and the 2gb card was 1600mhz. and i've tried 2 different corsair cards 4gb 1600mhz.
Is it something that makes it only able to extend the RAM with Toshibas own memories or is the second cardslot for RAM memory broken?

As I can see you use RAM modules with different specifications. Your problem is definitely RAM compatibility problem and you should use RAM modules with the same specification.
According notebook specification there are 4 memory slots and notebook can handle up to 32GB of RAM.
Compatible RAM modules are:
4GB DDR3L-1600 - PA5104U-1M4G
8GB DDR3L-1600 - PA5104U-1M8G
Of course you can use modules from other manufacturers but please don't use some cheap products. I can recommend you usage of Kingston memory modules.

After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

After Upgrading to 10.6.8 my aperture app starts but hangs trying to read the Lib. I removed the old lib and start with new. but still have the problem. 10.6.8 also made my Shark FX7 do the same thing. Any Ideas? Thanks

Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

Iphoto crashes so tried the Alt start with new library and that worked. So now what? How to I get back to my pictures.

That shows you that iPhoto is working correctly and whatever issue you are having is based in your original library.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive?
Or should I transfer them to Lightroom?

That's really a personal preference. Support for Aperture is coming to an
end and you may find yourself unable to get to theses photos in the future
in the case of a HDD crash if you can't get the software to reinstall.
Faced with that prospect, I would probably put it on my list of things to
do when I am feeling really bored and looking for something to amuse myself
with. You can export your Aperture photos in their original format to a
folder on your desktop and then import them into Lightroom. Use the copy
option on the import to save the photos in a new folder within your
Lightroom catalog.

Macbook pro wont start with 3 beeps

hi
Few months back I purchased a refurbished macbook pro (late 2012 model) with i7 processor and 8 GB ram. Now after 2 months I experienced problem with mac - it wont start with 3 beeps. I looked at different articles in net and found about no memory bank problem. I opened the back and changed slots and it seemed to fix the issue. However the issue was recurring few times and ram was changed. Again the issue seemed to have resurfaced. I tried with memtest in single user mode and RAM passes the tests.
What else could be the issue around the macbook pro. Do you suggest taking it to local Apple store to get it checked?
Thanks

Test each module installed alone while switching slots (power down before switching and remove battery.) Do both modules work alone in each slot? If they do, then it would appear the memory is good as are the slots. So, something else is at play and only an Apple Store has the equipment to go further - make a Genius Appointment and take it in for service.

Ipod 5 wont charge with new cable

The old cable of my iPod 5 broke, so when I got a new one(couple of weeks after it broke) it wont charge anymore. The first time I plugged it in with the new cable my iPod started up and charging, but when I swiped right on the home screen it turned off, then I could see that "battery low you need to charge before using" screen. Waited for about an hour but it wont start up just black screen. Tried to turn it on with the power button and home button but it doesn't react in any way, and my computer won't recognize the device at all.
The new cable is "Scanpart" "Apple Lighting Kabel". I think it's an official one.
Any ideas? Thanks for help.

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable if it is not a genuine Apple cable
Identify counterfeit or uncertified Lightning connector accessories - Apple Support
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

X wont start with nvidia driver?

Hi, installed x and it runs fine with the xf86-video-nv driver but when trying to install the fine "nvidia" driver X wont start, have followed the wiki but errors appears:
Failed to load the Nvidia kernel module
Screens found, but none have a usuable configuration
Fatal Server Error
No screens found
Giving up
Xinit: no such file or directory...
Writing this post from lynx so it might look kinda bad without BB code...=)
Also did a new installation.
1. Updated the system (Pacman -Syu)
2. Installed Xorg (Pacman -S xorg)
3. Installed nvidia driver (Pacman -S nvidia) Have a Quadro FX570M.
4. Tried both X -configure and nvidia-xconfig and then followed the wiki changed any mesa, nv to nvidia. Also removed the Type1 entry.
5. moved the xorg file cp xorg.conf.new /etc/X11/xorg.conf
What have I missed? It's kinda hard to copy my xorg.conf file here using lynx and have no other computer here at the moment, might be able to post the file later on today!
Last edited by ftornell (2009-01-26 09:15:00)

you might want to look at:
Failed to load the Nvidia kernel module
that might be a clue
what happens when you do
modprobe nvidia
Last edited by INCSlayer (2009-01-26 11:16:18)

Screwed up the "fixed" font, and X wont start with

Hello everyone.
Somehow, after installing a font package (xserver-terminus-fonts), I somehow deleted the default font in X - "fixed", and now, X wont start.
I've tried to locate the file(s), but I haven't figured out where it is, what name it has, and reinstalling xorg hasn't helped either.
I'm out of ideas right now - how do I fix it?

Font 'fixed' is an alias that is usually defined in /usr/X11R6/lib/X11/fonts/misc/fonts.alias. I have this line in my fonts.alias:
fixed -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso8859-1
You can check that the specified font exists with xfontsel. If it doesn't, you can edit the line to point to an existing font.
It is also possible that the font package you installed has messed up some configuration files... :?

4s wont sync with new icloud acount

I made a new icloud account and itunes, changed it on the computer and on my phone but for some reason itunes wont sync with my phone so i can back it up and restore my phone, ive tried to trouble shoot it but nothing is helping at this point. When i connect my phone to the computer itunes wont even pick up the device.
Anyone else have this issue??

Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,4
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.53 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP53.00AC.B03
SMC Version (system):          1.49f2
Serial Number (system):          W8xxxxxx7XJ
Hardware UUID:          E042B3E8-EE06-57A9-8A7A-F32A964A1BD0
Sudden Motion Sensor:
State:          Enabled
I jumped onto Parallels ie running pc on my Mac and downloaded iTunes which does the job its a bit clunky but does the job,, any other thoughts? appreciate your help btw
<Edited By Host>

Z68A-GD80 Wont post with new GPU.

I have two working Asus 7970 Matrix cards that my PC wont post with them in. All power connectors plugged in, tried two different PSU's a Corsair HX850 and a Corsair AX1200i. Tried both PCI-E slots on the motherboard with both cards.
The cards work in a second PC however, so it seems like its the motherboard.
No display signal, no beeps, no post.
Also, the system posts and works fine with a GTX 590 instead of the Asus 7970, and Sapphire's 7970 works fine as well.
i7-2600k
MSI Z68A-GD80
Corsair AX1200i / Corsair HX850
Asus 7970 Matrix
Corsair Dominator Platinum 4x4gb 1866

Hello Svet, even it has been posted more than one year ago. I experienced the same problem with a HD 7950.
I just want to say : Yes it works finally BUT where did you find this Bios ???
I use the global website and this version is simply missing !!!*
The first thing I did while seeing that I didn't have no video signal and no boot is to upgrade the bios but I only find the .H5 or the bios for Ivy.
Anyway I have a mixed feeling, quiet happy and yes ... thank you for your help now it seems working fine.
But on the other hand ...what a pity from MSI to have a so bad listing of their bios.
Once again thanks

Front End Services won't start with new cert, SChannel error about hostname

We have an existing Lync 2013 Enterprise system set up, and many of the servers are using certs issues by our local CA. I want to move several of the certs to third-party certificates so that non-domain machines can connect. The first change I'm making is
on our Edge pool. However, I'm having an issue. Here are the details:
Our internal domain space is int.domain.com. Our external domain space is domain.com. Our Lync FE server is LS01.int.pool.com and our FE pool is pool01.int.domain.com. I have generated a CSR and requested a certificate from Globalsign with the following
characteristics:
SN: pool01.int.domain.com
SAN: pool01.int.domain.com
SAN: domain.com (wildcard)
SAN: int.domain.com (wildcard)
After applying the new cert using the topology builder, I've rebooted and the Lync Front-End Server service will no longer start. The following SChannel error is in the event logs:
The certificate received from the remote server does not contain the expected name. It is therefore not possible to determine whether we are connecting to the correct server. The server name we were expecting is ls01.int.domain.com. The SSL connection request
has failed. The attached data contains the server certificate.
After reverting back to the original local CA cert, the services start. The local cert has a ton of individual SANs set up but I was under the impression that the wildcard SANs were supported and would be ok for the hostnames.
Why is it looking for my FE server name and not the pool? Is this an issue with my deployment, or is it with the cert? I'm not sure where to go from here.

Hey Matt,
As mentioned above wildcards are only supported for Lync web services such as lyncdiscover, dialin and meeting URL's. It is OK to have wildcards in the certificates SAN, but you must also specifically include the following:
SN: pool01.int.domain.com (SN must be pool)
SAN: pool01.int.domain.com (pool must also be included in SAN)
SAN: lync-fe-001.int.domain.com (the machine name of your front end server)
This should solve the issue for you.
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Power Mac G5 Refuses to start with new RAM!

I have a Power Mac G5 Dual 1.8GHz June 2004. I know I read somewhere online that it takes 1GB sticks of RAM, and that it has to be dual channel. I went to Best Buy today and got myself 2 sticks of 1GB DDR PC3200 "Compatible with 400/333/266MHz" Dimms, and installed them in pairs. When I start them with or without my old memory, my mac starts up, makes no noises, but the fromt white LED light blinks 2 times, and does this repeadedly until I shutdown and install the old 512MB sticks. I need to get this new RAM to work in here, I just paid $112 total for 2 sticks, and I am not ready to go back to the store yet. Is there something I am missing here? Something I am not doing right?
New RAM Specs:
1GB DDR Dimm,Q PNY Technologies, PC3200 "Compatible with 400/333/266MHz"
I need to get this to work on my machine! Thanks for any help.

Is there something I am missing here?
Not all RAM is created equal and seldom does over the counter PC RAM work in a G5.
Buy and install ONLY guaranteed Mac compatible RAM.
http://eshop.macsales.com/shop/memory/PowerMac-G5-Memory
BTW, you paid too much.
When I start them with or without my old memory, my mac starts up, makes no noises, but the fromt white LED light blinks 2 times,
That means "Incompatible RAM types".
http://support.apple.com/kb/ht1547
I am not ready to go back to the store yet.
Go back to the store.

Sync on desktop manager won't start with new 9700

I am attaching my 9700, with a USB cable, to my laptop. The Desktop Manager software opens but it will not start the sync'ing process with my device.
- the little "check" box - "automatically synchronize device and computer when USB connected" is switched on
- I am using the latest version of Desktop Manager
- the "Synchronize" tab is in grey. It's grey'ed out. When my curser hovers over "Synchronize" it won't light up, as in, it won't let me press the Synchronize button to initiate the process.
- my 9700 is brand new. I had no synchronizing problems with my previous model, the Curve.
- my laptop is a great device, I don't currently, nor haven't had, any issues with it in the past - DELL D420 Latitude. I seem to have all the drivers I need
- I am running Windows XP
- I am not linking to a server at work. My Blackberry is set is purely a directly link from the 9700 device, to my computer, and syncs with the calendar, address book and tasks list (MS Outlook 2003 from MS Office)
- my new 9700 - I bought it 2weeks ago. It did sync in the beginning. About three times successfully. But not now obviously.
- on my Windows bar at the bottom of my computer screen it pops up "new hardware added" and the 9700 device is no longer described by its identity number (PIN ref?), it says "new hardware added, 'memory device'"
- I've searched through the Blackberry help pages and so far, all I can come up with is that my computer can't seem to recognise now, for some unknown reason, that it is connected to my 9700. Blackberry help suggested I go to the "pairing" pages of the Help guide, but I thought "pairing" was only a subject that involves Bluetooth activities. Not a USB cable connection.
Anyone got any ideas?

Hey Graeme0309,
If you disconnect the BlackBerry from your computer and open Desktop Manager, are you able to open Synchronize?
What version of BlackBerry Desktop Manager are you using?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Itunes wont open with new os x yosemite

Hello,
I'm trying to open my iTunes music but it doesn't open at all with the new os x yosemite
thanks,

Hello Julio.26,
Thanks for using Apple Support Communities.
In order to help resolve this issue where your iTunes application will not launch on your Mac, I'd like you to please follow the directions in the article below to reinstall iTunes.
Download the latest installer
Open Safari or another web browser.
Go to the iTunes download webpage and click the Free Download button.
Make sure that the Mac OS X version is selected on that page.
Click the Download button to start the download.
Once the file is downloaded, a new Finder window appears containing two items (below). If a Finder window doesn't appear, locate the iTunesX.dmg file (where X is the iTunes version number) on the desktop (or wherever your downloads go) and double-click it to display these items:
A "Read Before You Install iTunes" file. This document contains the system requirements for the version of iTunes, and may contain other useful information about installing.
An iTunes.mpkg file (this is the installer file itself).
Install iTunes
Quit iTunes if it is currently open.
Double-click the iTunes.mpkg file. This opens the Installer application in Mac OS X.
Follow the instructions in the installer screens. If all of the installation components appear unchecked and dimmed (unavailable, and therefore not installable), refer to Mac OS X iTunes installer components are disabled.
After the installation has completed, quit the Installer and restart the computer. The new version of iTunes appears on your hard disk in your Applications folder.
Opening iTunes
It's possible that clicking the iTunes icon in your Dock or double-clicking an iTunes icon on your desktop could open an older version of iTunes. Open iTunes from the Applications folder to be sure you are opening the right version:
Double-click your hard disk.
Double-click the Applications folder.
Double-click the iTunes icon.
If you notice another copy of iTunes in the Dock after following these steps, here's a way to take care of that:
Quit iTunes.
Drag the iTunes icon out of the Dock.
Drag the iTunes icon from the Applications folder to the Dock.
Troubleshooting iTunes installation on Mac OS X
Take care,
Alex H.

Pc wont start with new p4 2.60c ht ready

Similar Messages

Maybe you are looking for