PCA Financial Statement (Profit/Loss Account and Balance Sheet)

Hi Experts,
I have the following question on preparing PCA Financial Statement (Profit/Loss Account and Balance Sheet), ECC6.0, with document splitting features.
Let say I started my business with the following GL accounts:
Bank A, USD6,000
Bank B, USD4,000
Capital, USD10,000
My company does have 2 departments (cost centers), and the above Balance Sheet GLs, cannot be identified / separated in the cost centers level. My cost centers to profit centers is one-to-one, which are cost center A = profit center A, and cost center B = profit center B
I have  Sales to customer of USD12,000, and Receipts from customer is USD7,000 at Bank B, therefore (customer balance is USD5,000).
I have also expenses:
Expense A: USD1,000 (cost center A)
Expense B: USD800 (cost center B)
Double entry for expense is Dr Expense, Credit Vendor.
I paid 50% of each of the expenses using Bank A, which are: expense A, paid: USD500; expense B, paid: USD400
My Financial statement without profit center should be as follows:
P/L Account:
Sales, USD12,000
Expenses, USD1,800
Profit: USD10200
Balance Sheet:
Bank A: USD5,100
Bank B: USD11,000
Customer: USD5,000
Vendor: USD900
Profit: USD10,200
Capital: USD10,000
Question:
How can I report the above financial statement into PCA level, which are Profit center A and Profit center B?
Note: I can't hardly separate Bank account, Sales (revenue) into Profit center level (Assuming I am only using FICO module, No SD/MM Module).
I can't use FAGL3KEH to differentiate the Bank Account.
During data entry for revenue, I can't have valid reason the revenue belongs to which profit center.
Kindly advise on is there any way (with logical reason) to make financial statement into profit center level.
THANKS IN ADVANCE.
Sbmel.

Basically You/Business need to Identify the need for Profit center wise Balancesheet is required or not? If Balance sheet at Profit center level is required then whether they have to decide whether can seggeregate every account balance to a profit center is possible or not? In other words on a cut over date you should have a Profit center wise Trail balance in place. Once it is in place rest all is possible.
What I can understand from your question is how to identify Gl balances against profit centers foor balance sheet Items. If it is not possible then you can create a corporate profit center and post all transactions to that profit center.
When comes to cash / Bank/Customer/vendor balances the system Identifies the item belongs to whihc profit center and in case cross profit cneter transactions are involved the system uses the "ZERO BALANCE CLEARING" account as an intermediate account for posting the data. By this one profit center will be Dr. and other will be in Cr as far as ZERO BALANCE ACCOUNT" is concerned and at company code level this GL balance is always ZERO.

Similar Messages

  • Using Profit Center Accounting for balance sheet reporting on various plant

    Hi Gurus,
    Can anyone please tell me the steps I need to take to use PCA for balance sheet reporting on various plants under one company code. If there is a better way then please let me know. Thanks

    Hi,
    It depends on the organisation structure you decide on and as such PCA is recomended for your requirement.
    Cosider each plant as a Profit center and decide cost centers under each plant/profict centers.
    For all the materials under each plant assign the prfict center or that pant.
    Change the feild status groups for Profit centers as mandatory.
    If you are in 4.7EE You need to write derivaton rules & Assign dummy profit center for scenarios that overlap or for sales made by one plant of the stocks of other plant.
    Need to identify the Asset costcenter/Plant/location wise adn need to assign in ACSET.
    You need to rum F.5D , F.5E as period end process.
    Down payments need to be handled by way if user exits if you are in 4.7EE
    If you are in >= ECC5.0 then simply activating the document split will give you the PCA wise balances without much month end closing activities.
    Make Zero Balance and Profit centers as mandatory in document splitting charactersics.
    In any case you need to completely test the scenarios and how you are goinbg to get th eprofit center in all the scenarios.
    Reward if useful.
    Sarma

  • Profit & Loss and Balance Sheet at profit center group level

    Hi,
    my client has "xxxx" as group in standard hierarchy of profit center. under this group there are further two sub groups "01" & "02". under each sub group there is one profit center "0100001" and "0200001" respectively. now the requirement is that the user would like to extract Financial Statement Version (P&L and Balance sheet) at all three levels "Top Group", "Sub Group" & profit center.Now i do know that by activating document splitting on the basis of profit center i can get FSV at profit center level through standard report "S_PL0_86000028" by specifying profit center in selection perimeters. but how can i get the same at two group levels? please help me out here.
    Regards,

    Hi
    As far as my knowledge it the only way to choose group of profit centers . as per below screen shot .. you are not permitted to choose profit center group.
    Regards
    Mahmoud El Nady

  • P&L A/C and Balance sheet for segment reporting

    Hi
    I am using the ECC 6.00, segmental reporting functions
    I have one requirement is that
    Customer wants prepare the profit and loss account and balance sheet for each segments wise, 
    Please help me, How to prepare the segment wise profit and loss account and balance sheet
    Tarakesh

    Hi thanks for quick reply,
    segment is assigned in profit center masters, i prepare the account groups for profit center and setting like okb9 and 3keh.even though one segment have assigned to no of profit centers.when profit center and cost centers are hitted segment also hitting. based on the cost objects can i get the profit and loss account for segment?
    but my doubt is how the system know particular g l account have revenue account and expenses account relating to segment.
    we want to purly segement profit and loss account and balance sheet only to meet the AS-17
    thanks
    tarak

  • Profit & loss account & Balance sheet

    Hi Gurus,
    Please Provide me Proforma of Profit & loss a/c & Balance sheet in income tax act 1956.
    Regards
    Kiran

    hi
    Kindly check the below link it might be useful for you
    http://www.nabard.org/pdf/2005-06/eng_con_bs.pdf
    Thanks & Regards
    Phaneendra

  • Simple Question about BW reports p&l and balance sheet

    I haev two reports Balance sheet and P&L  both have the same fields AS below, i want to know what is the key field which i can make the variable for user to display balance sheet or P&L is that  0GLACCEXT financial statement can do that.Any hints will also be appreciated
    Account Number
    Company code
    Business area
    Joint Venture
    Controlling area
    Fiscal year/period
    Currency
    Transaction Type
    Trading partner
    Profit Center
    Cost Center
    Cost Element
    Functional Area
    Key Figures
    Financial Statement
    Account Segment
    Chart of accounts
    Company code
    Currency Type
    Comparative Fiscal year/ period
    Fiscal Year Variant
    Fiscal year/ period
    Version
    thanks
    Regards
    Soniya Kapoor

    Can u PLEASE clarify if 0GL_ACCT HAS two nav attribute which can be used as filter P&L Account and Balance sheet Account to distingush the between the p&l and BAl sheet
    but now user want one field like "psbl" which will write on report either pl or bs
    please tell how to make the field as free characteristic so that it will pop as pl or bs once user click on it .i will reward all points after this small help
    thanks
    soniya

  • Can we take Balance sheet and profit & Loss account as per plant & Sales

    Hi Team,
    Can we take Balance sheet and profit & Loss account as per plant wise & sales office wise also.
    Regards
    JKM

    hi jkm
    Hi
    This can solve your issue could be helpful to you.
    Go to this menu path for report painter
    Accounting - Financial Accounting -Special Purpose Ledger - Tools - Report Painter - Report Writer - Report Group - Display
    T code GR53, GR55
    Enter the report group you want for b/s and p/l statement and choose execute and give the report group again and choose execute.
    After that give the year, period from to, company code, fiscal year, ledger and plan version 01 and choose execute
    Choose in front of the item Production Variances. The system displays the account to which the line items were posted. Material consumption is posted to account OEM Products Consumed.
    To call up detailed data, double-click on account
    In the dialog box, choose Actual Line Items for Table GLFUNCT, and then choose
    To display the original document, simply double-click on it to call up the detailed data. In this case, the original document is a Materials Management document.
    You document is listed under the FI-SL document number that you noted in the step Display Goods Issue Document. Select the Doc. info tab and simulate .
    Select one of the items relevant for material consumption by double-clicking it. This should be item 002, 004, or 006.
    Choose enter go back and cost of sales appear now switch to your first session.
    kind regards
    Arman
    sap fico

  • Balance Sheet and Profit Loss Account for Statutory Reporting

    Hi,
    For a company which is based in Vietnam, it is required that Balance Sheet and Profit Loss Account is reported in the Local Language Vietnamese.
    Is it possible to make such setting using the Country Specific Chart of Accounts ?
    Regards

    Hi,
    This answer is Yes, it is possible.
    Kind regards,
    John Chin

  • PCA and Balance Sheet Accounts

    My client wants to generate Profit Center Financial Statements e.g., Balance Sheet (B/S) and Profit and Loss (P&L)  The entire Chart of Accounts was assigned to Profit Centers, and all B/S and P&L accounts can be viewed in the GLPCT table.  This table is populated with all of the beginning balances for the B/S accounts.  I activated DataSource 0EC_PCA_3 and 0EC_PCA_4.  DataSource 0EC_PCA_4 provides beginning balances for a handful of B/S accounts from table GLPCA e.g., A/R, A/P, Inventory, and Fixed Assets.  However, I would like to be able to report on all B/S accounts with drill down capability to the line item level.  What would be the best business practic for delivering this capability?  My client is on R/3

    Are you sure you want line item drill down on the sub ledger recon accounts on PCA - ?
    Are the month end jobs posting balances per PCA - 1KEK etc..
    if you want line item detail (not on the sub ledger accounts - but on the rest of the balance sheet then I suggest..
    0EC_PCA_3 (GLPCA) into a line item cube (this will hold line items for all P&L and 99% of balance sheet accoutns - ie not the sub ledgers)
    0EC_PCA_1 in delta mode to a cube that is similar to GLPCT
    0EC_PCA_4 to a cube that is similar tp GLPCT (this will  take the subledger data)
    add in the OSS note to calc 0BALANCE properly in the update rules (so you have a balance even thoguh there is no movement inthat period
    Multicube the 0EC_PCA_1 and 0EC_PCA_4 cubes - this will then give you a full P&L and Balance sheet at profit centre, functional are, gl accoutn and co code level
    Then RRI down to the 0EC_PCA_3 cube if you wish line items (althoug not for the subledgers)
    You need to ensure all the GL accoutn sare set up in PCA config in R3 - so everythign posts
    You also need to be very very very careful with data taken on in R3 - ie if you do the sugegsted wya of doing history loads for TBs and custoemr open items - then you are not going to get decent profit centre allocations in PCA
    And .. this is all dead anyway as the new extended GL functionality in R3 kills all this in ECC5 - as you can allocate "profit centre" or segmentation at posting of invocie time or cash posting and don;t have to wait until month end to run 1KEK etc

  • Profit & Loss account Statement Transaction Code

    Is there any separate report T code for Profit & Loss account Statement .
    Moderator: Please, avoid asking basic questions

    New GL- S_PL0_86000028
    classic gl - F.01
    and some other imp tcode for trial balance, balance sheet as follows
    Balance sheet and P/L Account
    S_ALR_87012249 - Actual/Actual Comparison for Year
    S_ALR_87012250 - Half-Year Actual/Actual Comparison
    GL account balances
    S_ALR_87012279 - Structured Account Balances
    T-Code S_ALR_87012277 (Pgm RFSSLD00)
    T-Code S_ALR_87012301 (Pgm RFSUSA00)
    And Try below reports also, which will be usefull to you in GL, AR, and AP.
    F.97, F.98, and F.99.
    Hope this will help you.

  • Purchasing value & balance **** account & Profit & loss account tally

    Dear sir
    please help me that my queries are that purchasing value, consumption value should be matched with balance **** account & profit & loss account, if not matched how amount differe , i need T ocde for using  price difference account
    I need Report T code that i will be able to tally MM entry & FI entry
    Regards
    PARESH

    Hi
    Stock account currency shows the inventory GL account balance which will be maininted by FI persons: It is same as material currency if there are no adjustments.
    Ex: When you are doing GR for 10 quantity @ 10rs,
    then your material currency will show 100 and stock account will show 100, variance will be zero.
    Material value will be updated with quantity and value in same stock account, but it is dependent on material movements always.
    If you post a FI journal for 10rs in inventory account then entries will be as follows:
    Material currency 100 stock currency 110  variance 10. Without any material movements material account currency will not be changed but through external postings we can change GL account balance.
    Thanks

  • Mismatch - Profit and Loss Account and Sales Analysis Report

    There is a mismatch between Sales Analysis Report and Profit and Loss account Sales Figure.
    What will be the reason?

    Hi Nishiraj.......
    then you must update or create new Financial Report template for Profit And Loss Account and then check.
    For creating Financial Report Template please check this.....
    Financial--> Financial Report Template.
    http://help.sap.com/saphelp_sbo88/helpdata/en/45/10c8c90b9941dfe10000000a1553f6/content.htm
    Regards,
    Rahul

  • Profit center group wise balance sheet and trading account report req

    Hi.
    We are using Profit ceter accounting for one of our clients.its ECC 6.0 therefore New GL is activated. FSV is not configured.
    Now I want to get the reports - Profit center group wise balance sheet and trading a/c.
    Can anyone help me in this regard.
    Thanks in advance.
    Regards,
    Padmavathi

    Hi Padma
    the std reports S_PL0_***** serve the purpose... You can browse SAP easy access menu under FI
    you can input PC or a group of PC as additional selection criteria
    Ajay M

  • P&L A/c and Balance Sheet according Schedule VI in PCA

    Dear SAP Gurus,
       My cleint needs to see his P&L A/c and Balance Sheet according Schedule VI in Profit Center Accounting. Because all Branches are Profit Centers. So he need to see his Branches P&L and BS by Schedule VI.
    How can I acheive this in Profit Center Accounting.
    Kindly assist me reg this....
    Thanks in advance,
    Regards,
    Balaji Bhonsle

    Hi Balaji bhau
    You can copy your schedule VI financial statement version (FSV) from FI to PCA using KE5B
    I hope you would be having FSV in your FI... Once you copy this, you can view your balances in schedule VI formats using EC-PCA reports
    If you are on ECC 6.0 and use New GL - then you can use reports in FGI3 or prepare your own report painter reports using LIbrary 0FL
    Regards
    Ajay M

  • Profit center wise P&L and Balance Sheet for 12 segments as per AS-17

    Hi Experts,
    I am woking in ECC 6.0. My Client has 12 Segments. 10 Cost Centers. They want segment wise P&L and Balance Sheet. Pl advise how to map..The options are :-
    1.  Use segment reporting - if i define 12 segments = 12 profit centers, then the problem is one to one assignments of profit centers to cost centers as there are only 10 cost centers and profit centers will be 12.
    2. Should i go with Business ?
    3. Will the Profit Center approach help ? then again one to one mapping to cost centers is not possible...
    Pls help...its urgent
    Regards
    Pyare

    Hello
    This is posible if you use the New GL functionality in ECC 6.0
    The New GL functionality works on the totals table FAGLFLEXT instead of the GLT0 which was used in the Classic GL. The Segment field is a standard field in the table FAGLFLEXT.
    For creating segement wise financial statements,
    1. You have to first define the segments in the enterprise structure
    2. Link the PC to the segments (you have field for segment in the PC master data)
    3. The standard report (S_PL0_86000028) will generate the segment financial statements for a FSV.
    Thanks,
    Anvesimo

Maybe you are looking for

  • Sql to tell report names based on view/table name

    Hello, we recently upgraded to release 12 and planning to implement sub ledger accounting and we are in the process of identifying our customizations written on top of distribution tables so that we can tweak them to go after SLA tables. Majority of

  • How do I Apply a Particular Format to cells using the IFBLANK function?

    I have an excel summary tab that copies information from other tabs referencing the cost of a product (guide price and actual price). I've set a function on the summary tab, so that if the "actual price" cell (located on the pricing tab) is filled th

  • Sender File Adapter FCC to Hierarchial MT Coversion

    Hi,    I have MT with structure as follows Header               1..1     F1          string  1..1     F2          string  1..1     SUB              1 to unbounded        S11       string  1..1        S12       string  1..1 Can you anybody help me out

  • XI system down due to file generation in file System

    Hi All, We are facing one issue in our XI Prod system. Messages will get sturck in inbound queue as system is frequently getting stoped due to insufficient space in the FileSystems . This is happening due to generation of files heapdump.phd and javac

  • Does the new AppleTV require iTunes to be running all the time?

    The old AppleTV required iTunes to be running if you wanted to stream anything. Does this still apply to the new one?