PCA Plan Versions Not showing in GR55 Report

Hi Gurus,
My user has uploaded the PCA plan and could see the same in GP12NA for 2011 for plan version Z2. But when she is running the report (P&L )from GR55, the report is not pulling up the plan values.  (The report has Z2 as one of its parameters.)
Could you please suggest the places i would need to look to fix this?
(I've checked that the plab vesion is activated for 2011)
Regards,
Erp.Warrior

Hi
Using which LIbrary have you created the GR55 report?
GP12NA is new GL.. So, have you created the report using 0FL LIbrary or a Z library based on FAGLFLEXT?
BR, Ajay M

Similar Messages

  • Data not showing up on report

    Hi
    I have an Infocube that has data (ready for reporting) loaded from APO Livecache.
    I'm running a BEX report that gets data from that cube, and for some reason the value for one Key figure is not showing up.
    It's there in the infocube, but is not showing up on the report. The column for that key figure is just blank.
    What can I check or do to see the value there?
    Thanks!
    Pooja

    Hi
    There are no restrictions or conditions on the KF and it is running on a single Infocube.
    There are non-zero values in the cube.
    The field level authorizations are also fine...
    we used to be able to see the values when we last ran this report 2 weeks back.
    There's a calculated key figure that is a sum of this key figure that's not showing up and another one. It is showing the aggregate value correctly! Eg:
    KF not showing up: Production Planned
    2nd KF : On Hand Stock
    Calculated KF Ending Inventory = Production Planned + On Hand Stock
    Although Production Planned is not showing up in the report, I checked its value in the cube and the Ending Inventory value is summed correctly in the report.

  • Option claims from CRM are not showing in BW report.

    Hi All,
    We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
    Haaris..

    Hi,
    I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
    The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
    The infoset has four DSOs and one characteristic as components.
    Please let me know if you get any idea?
    Haaris.

  • Safari 6.0.1 not showing in System Report (installations)

    I have noticed that Safari 6.0.1 is not showing in System Report (installations) only the previous Safari 5.1.7 - Anyone know why this should be so? Now in Mountain Lion we do not have the update info in Software Update as before; only by going to "About this Mac". Any help appreciated!

    Now in Mountain Lion we do not have the update info in Software Update
    If you click your Apple menu icon you should see Software Update from the drop down menu.
    Clicking Software Update should open the App Store for you.

  • HT1937 I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

    I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

    i have the same problem. I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed. At this time does not changed my plan yet. I have the reference number of the bank for the transaction.
    <Email Edited by Host>

  • Planned Values uploaded in KP06 not showing on GL Reports

    I have uploaded the budget but now I can't see the values in the Planned values Column in SAP.  I have checked OKEQ and see that for 2012 and the planning version that everything is working.  I checked the previous fiscal year and it show fine there.  Any other ideas why this wont show up on the report?  It ias the same report we used last year of course changing the dates.  Please le me now.
    Thanks,

    Yes I have tried that report.  So I should have put in my original post that I see the values have uploaded and that cost center report shows the planned values.  It is one of the custom (Z) reports from report painter that I can't see the values in.  The strange thing is last years values are showing but for this fiscal year it is not.  In OKEQ I have the fiscal year added and I have "Integrated Planning" checked.

  • Plan Data Does Not Show in FI Report

    I am using 6.0 with New GL and Functional Area standard Report S_PL0_86000029.  I added cost center plan data using KP06 and that info shows fine in std report for cost centers (S_ALR_87013611), but does not appear in the aforementioned FI based report.  Is there some transfer transaction I am missing? 
    Thanks
    David

    I resolved my problem by creating a new GRR1 report using the New GL (FAGLFLEXT) table.  This report brings in all of the primary cost element postings as well as the secondary overhead postings.  This provides a much more holistic view of FICO reporting.  I used Functional Areas in order to break out the income statement into typical sections, including one for Net Order Consumption.  This special section for orders should be zero if everything is settled to either WIP or variances.  Otherwise I see a order related settlement problem on the face of the income statement.  I found there was a slight problem with the secondary postings between the cost center and order.  I used substitution rules to force the order postings to have one functional area while the cost centers provided the other side.
    Once I haad the actual postings working, the next problem was that no plan data was coming to the report.  I had to work through many details to finally get the plan data to come through, but now it works as designed.
    Juggler

  • Updated SET but does not update in GR55 report

    Hi,
    I add few accounts under a new node in Account group hierarchy using transaction KDH2. However when I run GR55 report that uses the SET(hierarchy), the node and accounts does not show.
    Kindly advise i am missing a step in the process.
    Umang

    Check whether any amounts have been posted to the mentioned GL codes. If no postings have been made then ensure that the layout has a settings to display zero rows.
    Also try generating the report.
    Regards
    Rakesh Pawaskar

  • Actual YTD & MTD value is not showing in BEx report....

    Dear Experts,
    Thank you all for the suggestions and support in solving the issues.
    I need your help once again in one of the complicated issues I am facing.
    Details :
    We are using one report Dealer Target.
    This report uses YTD and MTD. It shows the Target value (Planning Cube ) and Actual Sales value ( Actual Sales ). Here we are getting the right value of planning but not picking the actual sales figure from Sales cube.
    As we are using YTD and MTD :
    Actual YTD should show the a net sales from 1st'April to till date .
    And Actual MTD should show the 1st of any month to that date (User input).
    But in our case , both Actual YTD and MTD is blank. That means , data is not getting populated.
    We are using an USER EXIT for the requirement...
    But I am not able to find the way to proceed to find the problem where its getting stucked..
    Please suggest .. Waiting for your valuable response.
    Thanks,
    Sanjana.

    Hi,
    In this case have you restricted Value Type for Actuals as 10 and Budget as 20 ???
    This may be the reason why you are not getting Actaul values, pls check for the same.
    Regards,
    Vishnu

  • Images not showing in the report

    Version: Crystal Reports XI
    Hi,
          Currently I have a report that has images from the database (blob) , logo, and images that I inserted in the report. The report is being called by a jsp page. Our crystal server is installed in unix server.
    When we try to run the report thru our  web interface...... the report runs but the images are not showing. it only shows like x image in it.....
    Don't have any idea how to resolve this....... please help

    If you are using Web Service to access Reports through BOXI server, then as per documentation you need to call getImage of ReportEngine with callback handler after you call getDocumentInformation.
    Refer to the developer's guide -
    http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm#en/WS_SDK/wssdk_consumer/doc/wssdk_dg/DevelopingConsumerWebApps18.html

  • Data is not showing up in report on ODS

    Hi All,
    we have requirment like below
    we have an ODS  no update rules and nothing with 5 fields . with bex reporting flag checked..
    we have function module to fill the data for these 5 fileds in  ODS active data table .
    So data is there only in active data table that table was filling  by using  function module.
    so i need report that data .when i created and run the report data its not showing up.
    Please let me know whats the issues is and how to handle.
    I appreciate your help
    Regards,
    Sirisha

    In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
    thanks.
    Wond

  • Hierarchy node in query rows not showing values in report

    Hi sdn
    I'm taking hierarchy node on rows and some plan and actual values on columns but i'm unable to get values in the report for only plan values
    How did I reconcile the values whether that value is available in hierarchy or corresponding value's for plan data is available in the cube,pls give me clues
    rubane

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • Records Not Showing Up On Report

    I'm using Crystal XI
    I can take the query from "Show SQL Query..." and paste it into a query screen in SQL Server 2008 management studio and retrieve the correct records.  However, the report itself does not contain all the records the should have been returned.
    To the best that I can figure, the records where a transaction date (date/time field) is null is not showing up on the report.  I only display the field, do not do any calculations based on the field. 
    It is part of the record selection formula, where I test for the field to be between start/end parameters or is null (which produces the correct SQL query as I stated above)
    So why are the records not showing up on the report, and more importantly, how do I get them to show up?
    TIA

    It already was set to "Exception for Nulls"
    On the other hand, just on a whim, I tried reversing the order of the query from what it was:
    {MyQuery.Company = {?Company}
        And
        {MyQuery.Transaction_Date} In {?Start/End Date}
        Or
        IsNull({MyQuery.Transaction_Date})
    To:
    {MyQuery.Company = {?Company}
        And
        IsNull({MyQuery.Transaction_Date})
        Or
        {MyQuery.Transaction_Date} In {?Start/End Date}
    And that seemed to work.  I'm not sure why it will work in the Mangement Studio, but not in Crystal Reports, but at least it works.
    Thanks for the tug in the right direction.

  • Report Document not show on Crystal Report Viewer in C#

    My program is modified from VB.NET. Now I struck with Crystal Report that Crystal Report Viewer didn't show Report Document.
    Printing code is composed of two forms. One assign parameters and objects need. Other is Crystal Report Viewer form, CrystalReportForm. Last one run report by parameter from the first.
    When run this code that it didn't found any error but the problem is no report show on Crystal Report Viewer on second form. It just blank Crystal Report Viewer. There arm't any message response.
    Here is my code.
    // report caller form.
    private void Print()
       CrystalReportForm rptForm = new CrystalReportForm();
       string[] strtbl;
      strtbl = new string[1];
       string[] strqry;
      strqry = new string[1];
       // prepare var
       string myqry;
       string myrpt;
       // Pass The Table That you used in the crystal Report
      strtbl[0] = "r_receipts";
       // Pass the Query
      myqry = "SELECT * FROM r_receipts";
      myrpt = "rptReceipts.rpt";
      strqry[0] = myqry;
       //Pass For Mdi True
      rptForm.MdiParent = this.ParentForm;
      rptForm.ViewReport(myrpt, strtbl, strqry, "");
       //Parameter Value It is Optional
      rptForm.Show();
    // Crytal Report Viewer form.
    public void ViewReport(string ReportName , string[] TableName, string[] QueryString , string Parameter = "")
       //Me.MdiParent = mainpage;
       if (TableName.Length  != QueryString.Length  )
       MessageBox.Show("Passed Variable Are Not Correct", "Message", MessageBoxButtons.OK, MessageBoxIcon.Information);
       return;
       CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
       CrystalDecisions.Windows.Forms.CrystalReportViewer crv  = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
      crv.ActiveViewIndex = 0;
      crv.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle;
      crv.ToolPanelView = CrystalDecisions.Windows.Forms.ToolPanelViewType.None;
      crv.Dock = System.Windows.Forms.DockStyle.Fill;
      crv.Location = new System.Drawing.Point(0, 0);
      crv.Name = "CrystalReportViewer";
       MySqlDataAdapter at =new MySqlDataAdapter();
       DataSet ds = new DataSet();
       for (int i = 0; i < TableName.Length; i++)
      at = GetDataAdeptor(QueryString[i]);
      at.Fill(ds, TableName[i]);
       string rptPath  = "";
      rptPath = Application.StartupPath + "\\" + ReportName;
      rpt.Load(rptPath);
      rpt.SetDataSource(ds);
       if (Parameter != "")
      rpt.SetParameterValue(0, Parameter);
      crv.ReportSource = rpt;
      crv.Refresh();
       //CrystalReportViewer.DataBind();
       //Me.Panel1.Controls.Add(CrystalReportViewer);
       Panel panel1 = new Panel();
      panel1.Controls.Add(crv);

    Hi Bhushan,
    It's not yet fixed. My dataset (ds) can't bine to DataGridView as
    DataGridView1.DataSource = ds
    But it could do like this
    DataGridView1.DataSource = ds.Tables[0];
    When I bine to Crystal Report Viewer setdatasource
    CrystalReportViewer1.setdatasource = ds.Tables[0];
    It still not work, anyway you suggest let me in the right way. I very confuse the thing I fix to bine to DataGridView
    Thank,
    Chaiwat

  • SPM 5.2 - problem with reason/activity fields - not showing in the report

    Dear experts,
    I have a situation that is hard to describe.
    We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
    I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
    As you know the Activity field is mandatory text field and at least one character must be entered,  but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
    The worst is that I can`t simulate such cases.
    Have you ever heard of such nosense?
    Thank you,
    Iliya

    I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
    I hope the latest patches are fixing this!
    BR
    Iliya

Maybe you are looking for