PCB 1.0 or PCB 1.1 ?

Hello,
I bought P45 Neo3-FR. Now I wanted to ubdate the bios, but I don't know, which PCB board version I have. How can I find this out? There is two different Neo3-FR models;
P45 Neo3-FR (PCB 1.0)
P45 Neo3-FR (PCB 1.1)

Quote from: yannara on 13-November-08, 12:53:49
Hello,
I bought P45 Neo3-FR. Now I wanted to ubdate the bios, but I don't know, which PCB board version I have. How can I find this out? There is two different Neo3-FR models;
P45 Neo3-FR (PCB 1.0)
P45 Neo3-FR (PCB 1.1)
MS-7514 PCB 1.0 = 601-7514-010 = P45 Neo3-FR = BIOS version 1xx
MS-7514 PCB 1.1 = 601-7514-060 = P45 Neo3-FR = BIOS version 2xx
Sample, can be found over backside of the mainboard:
Or over mainboard box.
Else, How to identify your BIOS and m/b version [Model Name, Model number, EPR number ==> https://forum-en.msi.com/index.php?topic=113146.0 ]

Similar Messages

K8N Neo4 Platinum (PCB 1.0) and AMD 64 3800+ X2

Help!
I have a K8N Neo4 Platinum (PCB 1.0) and it had an AMD 64 3200+ single core CPU.
Now I've upgraded to an AMD 64 3800+ X2 dual core but the BIOS and MS Vista are seeing only the one core.
The BIOS is at the latest version - 1.D.
Whats' going on?
Hitch.

Quote from: hitchhiker on 20-April-07, 08:44:57
This motherboard does support the X2 CPU right?
It's listed as supported on the MSI website but has nayone else got both cores running on it?
Hitch.
Yes it does support X2
Did you clear cmos with power cable disconnected from psu?
Look at my signature for link to proper method.

Controller different Input in the same time in a real Scenario...(SIMULATION IN 2 TANKS CONTROLLER BY PCB BOARD)

Hi! I really need help....
I´m doing a simulation where I can controller the input and output with one external PCB, all is working properly (the communication) but my problem is, I can´t open where ever I want the different valves...I mean, I must wait until the process is finish...
The program is working with diferents process like this:
§Process 0:
Programinitialization. Tanks and pipes in zero state. Control for this state with “pump on” button.
§Process 1:
§State:
“ Pump on ” button istrue: Pump 1 isrunning, andTank 1 starts to be filled with water.
“ Pump on ” button is false: nothing happen, go to the next process
§Process 2:
This process is controlled from the “Control 1”button with is who control “Valve 1” for the discharge of water from tank 1 to tank 2.
§Process 3:
This processiscontrolledfromthe “Control 2 ”button with is who control “Valve 2” for the discharge of water from tank 1 to tank 2 if “Control 3 ” button is close or if “Control 3 ”button is open the water go out from the loop.
§Process 4:
This processgiveyoutheoptiontocome back totheprocess 1 ortotheprocess 2 dependingofthestate in process 3.
So my problem is I want run different processes in the same time, without having to wait out the current process is running....
this look like this:
and with the differents states...so I was trying to use a Statechart for try to improve the simulation....
like this:
But when I was tried to implement in labview with the statechart module i can't find the way to interconexión with this new module...
Because i need two differents regions...but i can't use the connexion between them....
Some new idea, help....all is welcome!!!
Thanks in advance.
Elena

Buenos días Alvaro,
Si, mejor en español
Si, me has entendido bien, exactamente es lo que me gustaria.
Empece por mi cuenta con labview y hay muchas cosas que se me escapan... Voy a implementar la máquina de estados a ver si asi soluciono el problema.
Muchas gracias!
Un saludo!

I have a sbc65ec which is a small Pcb with a ethernet por...

I have a sbc65ec which is a small Pcb with a ethernet port with it you can monitor voltages, operate relays from your pc and it works fine locally i.e on my home network, but I would like to moitor the pcb from my place of work, it can do this but I don't know how to setup the router to do this, I paste the section from the manual which explains what I a trying to do
Viewing readings on the net!
This demo has been created simply by connecting an SBC65EC board to a Billion ADSL Modem/Router. The router is then configured to make the SBC65EC a virtual server that is accessible via the internet. Most modern routers have this feature built in, and can be used. Note: The board used in this demo is running an older firmware. The new firmware has more options, and the NetBIOS name can be changed on the network settings page.Q. How do i do this with my router???
Q. What do I type in the address bar of my browser to access the PCB (I Type http://mxboard/ when I use it on my home network)
Message Edited by paulshirley on 11-03-2007 10:58 AM
Message Edited by paulshirley on 11-03-2007 05:14 PM

hi,
Thanks for replying,
The easy answer first the router is a linksys WRT54G.
The network I am using ?? well this Box WRT54G hangs on my wall, its connected to a broadband modem, which is provided by NTL (Virgin) a cable joins the modem to the Linksys and my computer is fitted with a Msi wireless Lan card, I know this because I have a little icon on the bottem bar of windows.
When I want to go on line I just open up internet explorer and if by magic I'm on the internet I have a laptop which also uses the signal from the linksys, from what I understand neither computer is a server I think? as I can operate either without the other on.
As you can guess I know nothing about networks to make matters worse i'm an electronic engineer shame on me.
paul
Message Edited by paulshirley on 11-04-2007 04:22 PM

How to create a via from layer 1 to 3 on a 8 layer PCB?

I'm working on a design for a 8 layer PCB with Multisim/Ultiboard v10. In Multisim under sheet properties i selected the PCB to contain 8 layers, which makes Ultiboard to create this board with 4 layer pairs and 0 top/bottom build-ups. In the PCB properties of Ultiboard i enabled micro vias and buried/blind vias but i noticed that i'm not able to allow vias between some combinations of layers.
For example i can enable vias from top to the second layer (1st inner) and from top to the fourth layer (3rd inner), but not from top to the third layer (2nd inner).
When placing a via, i can select top for the start and the 3rd layer
for the end, but it will be created as via between top and the 4th
layer, which will -of course- shorten several traces on the 4th layer.
So my questions is: Why am i not allowed to create a via, that goes from the top layer to the third layer and how to enable all possible combinations of start and ending layers for the via?
Thanks for your help
fhn
PS: sorry for my bad english :/
Message Edited by fhn on 08-22-2008 04:39 AM

I am not 100% sure about this, but what I see happening here is that you can only select certain combinations of pairs. Once that selection is made it will gey out other selections as not valid. You might want to carefully look at the options in the via selection and make sure of which layers you want vias to be on. I don't know about enabling all layers in this selection. I would assume this would not be legal from a design rules standpoint, but since most of my boards are either single or double sided I do not have the necessary experience with multi-layers to give a proper answer to that.
This is the only thing I can advise as when I went through the process I was able tio select the vias for the layers you outlined in your post.
I hope this helps somewhat as this is all can tell you.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

R7950 TF3 OC BE with 7950 PCB

Hi everyone. This is my first post so please go easy on me!
I've been gradually putting together a new machine over the last couple of months and finally got around to upgrading my 5850 card. I want to incorporate the new card into my water loop and fit it with a Heatkiller 79X0 waterblock. Having done my research, I know I need a card with a 7970 reference PCB for the Heatkiller to fit. So, after reading many comments about people ordering 7950 TF3s and finding they have 7970 PCBs, I ordered what's called a "3GB MSI R7950 TF 3GD5/OC BE". I assume the BE bit refers to Boost Edition as there's a "Boost Edition" sticker on the box.
Anyway, I opened the box and unfortunately it has a 7950 PCB (with 6+6 pin power) so won't be able to take a Heatkiller block.
Have I just been unlucky and received old stock or is the "BE" edition different to the normal "OC" which, I believe, has the 7970 reference PCB?
Any help would be most gratefully received, especially if anyone can point me in the direction of exactly which version of the R7950 TF3 I need to order to be sure it has the 7970 PCB.
Thanks, guys!

Sorry to hear that. I've been searching for the difference between mine and the BE and now I know. Wonder why MSI reverted the design back to the 7950 PCB?
R7950 Twin Frozr 3GD5 V2/OC
That's the one you need, and you'll find it at most major online retailers.

PCB-Layout 290x Gaming 4gb vs. 8gb

Hi,
is there a big difference between these two Layouts?
I want to put the 8gb under Water. Fit a 290x 4gb cooler on the 8gb version?

PCB layout is the same as the 4GB Gaming version its just it has higher capacity VRAM chips that are double the capacity each!
4GB has 16 256MB chips
8GB has 16 512MB chips
rest is identical as they share the same PCB!

Qosmio G30 and vga/pcb problems

My Qosmio G30 has developed a vga/pcb problem.
Toshiba engineers tell me the vga/pcb is corrupt and needs to be replaced but since this is built-in the whole mother board must be replaced.
The cost for this is nearly half the cost of the original machine and much more than many new Toshiba notebooks.
Anyone have similar problem or experience anyone have any suggestions.
Edited by: ADMIN

To me this clearly sounds like the problem that stroke me last weekend - obviously the NVidia GPU died and causes the trouble. Check if your machine is still under warranty - if not i would claim goodwill.
If the repair-costs are too high for you i would sell it on Ebay and get another machine as the technology level is two years (which is a century in computer-business) and you can get better performance at a lower price-point - even if it hurts to let the G30 go.
BRgds
The Q

MSI 990FXA-GD65 [MS-7640 PCB 3.0] throttling issue

Hi, i'm on the last official BIOS (J.90) and my CPU throttle to 4x multiplier on my Phenom II X6 1090T.
I got this problem on every cold start. And i need to reboot in order to temporary fix it...until the next cold start.
I noticed that when i got the problem, the temperature readings are out of range: right now i'm stuck on X4 and AMD overdrive shows a constant 197°C on all cores and OCCT reports constant 255°C. So i figure it's related to throttling protection based on false/wrong temp values from the temp sensor.
My CPU voltage is low, the big Noctua is properly installed and very cool (i can feel the heatpipes very cold!)
I tried differents settings on the bios (disabling cool n quiet for example) but nothing helps. I made a clear CMOS with the hidden button on the connectors panel, problem still there, even with stock bios parameters.
Is it a bios version issue ? do i need to rollback to another version ?
I made a ticket to MSI support but response for now.
Sorry for my bad english, i'm french
EDIT: my PCB is a 3.0 one and maybe this is my cure ?
"4.Fix the issue that CPU Freq will drop with PCB 3.0 mainboard when
set AMD Cool'n'Quiet to disable and Pull off the power than enter system ."

Quote from: ren33 on 30-November-12, 00:59:18
I am little confused about UEFI versions names
On this thread https://forum-en.msi.com/index.php?topic=151619.msg1197501#msg1197501 the latest UEFI is called E7640AMS.JA1 , but you recommend me to flash "BIOS 19.10B1"
Is it the same ?
Thanks !
Yeah it's the same. The file is named .JA1 and it's shown at BIOS as "19.10B1". The latest official BIOS is 19.9!
Your problem seems similar to mine (Core temp : 255°C at cold starts) so I think it's hardware failure (mainboard's sensor maybe)!

PCB Board Size

How can you change the dimensions of the board itself? I transfered a schematic from Multisim to Ultiboard and it gave me some default board outline size. I want to change this because I can fit all my components in a much smaller board. I tried to select the board outline as a polygon and drag it but it is unselectable. I went into PCB properties to try and find a board dimensions characteristic and was unable to find anything. I looked at the help file and throughout this forum and have been unsuccessful. This seems like the most simple of tasks and is driving me crazy can you guys help?

Hi ravivasudevan:
You can resize the board, but first you need to select the correct layer. In the Design Toolbox, select the Layers tab, then double click the Board Outline layer. The layer name should get highlighted in red. (You can also change the layer from the Draw Settings toolbar.) You can now select and drag the outline, or select and edit its properties. You can also use the usual draw tools to draw a non-rectangular shape.
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo.

Is it pattern matching the best way to check presence and orientation of components on a pcb board?

Hi, like i ask on the title i need some hint about this. I need to program a simple AOI machine that must inspect a pcb board and find if all the components are correctly placed and oriented. I though to use the pattern matching with a good template of the object to inspect. Can it work?
All kinds of tips that may come to your mind please tell me, because this is the first time i try a task like this. I already have some experience in image manipulation but not in AOI machines.
Francesco.

Hi Francesco,
you can find some useful information here, here and here.
I hope this will help!
Bye,
Licia

How to Save PCB design as a component

Hello,
I'm trying to combine multiple PCB designs into one file in Ultiboard, and I recently find out it has the ability to save pcb design as a componet. Is anyone know how to use this feature ?
Thanks
Solved!
Go to Solution.

I don't know of any easy way of achieving this. It would be possible to manually modifying the ewnet file before you transfer to Ultiboard. For this, there is no documentation of the file format (but it is ASCII) and it would rely on you later selecting the correct RefDes when you place the part.
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo.

HDD PCB doesn't work anymore MK 5059 GSX

Hi all,
I'm looking for a solution I've an external drive where was a
MK5059GSX
500 GB
The drive doesn't work anymore after less than 5 months.
It's seems to be that the PCB out is.
I'm looking for the same parts for this dirve because there is 190 GB important data.
Here are the reference of HDD and PCB
Thanks for any help
Model MK5059GSX
HDD2H92 Z ZK01 T
PCB :
Up ref G002641A
Down ref MDK 339V-0W
Sticker IF103BYU4

I would consider a drive service company. They have a great success rate at retrieving data, but typically you lose the hard drive since they had to disassemble it and the costs are in the hundreds of dollars.
Other thought is to go online and see if the hard drive is available from E-bay or some other vendor and cannibalize the parts.
Hard drives are pretty specialized and I don't see manufacturers selling the parts. Even the drive service companies need specialized tools and a clean room. Good luck in retrieving your files.

I m new to multisim, i need pcb layout of a cicuit. can anyone make it? i m attaching the circuit diagram.

I m new to multisim, i need pcb layout of a cicuit. can anyone make it? i m attaching the circuit diagram. plzzzzzz, its urgent. i have to submit the project in my college. plz try to make it single layer.
sad.hussain9136

Hello,
Multisim is not the right software for PCB layout design. That would be Ultiboard. With the integration between the 2 you can create your circuit in Multisim and transfer it to Ultiboard to easily design your one layer board. There are a lot of tutorials online that can help you do this. If you feel you need instruction, you can always book a class (online or on-site) to learn Multisim/Ultiboard.
Kind Regards,
Miguel V
National Instruments

Testing of IC's in a PCB using LabVIEW

There is a PCB with a lot of IC's. The IC's are mainly buffers,SRAM,PROM, ASIC's, CPLD's and FPGA. None of them are JTAG compatible i.e. no TDI/O pins available. However only one CPLD is JTAG compatible. Is there a way through which I can test the functinality of these IC's using LabVIEW?
Without the JTAG interface, do I have any other medium through which my VI's can communicate with these memory IC's?
one more thing is that I cannot remove any of the IC's from the PCB, they have to be tested while they are present in the board itself.

sumukh wrote:
There is a PCB with a lot of IC's. The IC's are mainly buffers,SRAM,PROM, ASIC's, CPLD's and FPGA. None of them are JTAG compatible i.e. no TDI/O pins available. However only one CPLD is JTAG compatible. Is there a way through which I can test the functinality of these IC's using LabVIEW?--Yes
Without the JTAG interface, do I have any other medium through which my VI's can communicate with these memory IC's? Not directly, of course. You need to find out how you can communictae to the card. Is it BDM, serial, USB, Ethernet, PCI, whaterver interface that allows to program PLD's, FLASH memory and can interface to the outside world. LabVIEW can communicate with all that. It may require additional hardware (BDM, JTAG, adapters).
one more thing is that I cannot remove any of the IC's from the PCB, they have to be tested while they are present in the board itself. Of course.. That is usually how they are tested once they are integrated into the board (system)
It sounds like this is the first time you do this.
You need help beyond LabVIEW if that is the case.
You first need to identify how you can interface to the board. That step is required regardless of what language youuse to develop test software. The ahrdware designers should be able to help you with that.

Qosmio G10 with new graphic card and pcb - Tools CD Update doesn't work

Hi everybody
I hope you can help me. Before a few weeks I received my Toshiba Qosmio G10 back from the support, because the notebook didn't work anymore. So I get it back with a new Grafic card and a new PCB. With my Notebook I get a CD which is called update Tool CD-Rom and an instruction sheet, where it says that you have to boot with this update Tool CD-Rom after you had installed the Windows with the reovery CD.
So I made it, but when I know put the update Tool CD-Rom in and I boot with it, the computer installs something but after a short while there comes a message that it is a different model and that I have to put a button to shut down the Notebook. So i made it but the Windows doesn't start.
Why is that so? I had everything done which was said on the instruction sheet.
Please help me

Hello
It will be interesting to find out more about this update Tool CD-Rom. Is there Toshiba label? Can you please write what is described there?

PCB 1.0 or PCB 1.1 ?

Similar Messages

Maybe you are looking for