Pcd folder is empty after installation

Hi All,
I have installed SAP Netweaver sneak preview 7.0.Server is running fine.I tried to get logon par (com.sap.portal.runtime.logon.par) from
<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd.But the pcd is empty.I tried to get same through support after login to portal.
Is this problem with installation or ?
How can i get the par file in this case.
Regards,
Madhvika

Hi Harini,
I did search on entire server folder to look for com.sap.portal.runtime.logon.par.
It found out same at location <J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\temp.
But question here is why pcd is empty and all par files are inside temp.
any idea?
Again is it due to fault installation of server?
Regards,
Madhvika

Similar Messages

HT3258 My 'Incompatible Software' folder was empty after 10.6 (Snow Leopard) install (upgrade)_

After installing Snow Leopard (10.6.3) over my 10.5.8 OSX, my 'Incompatible Software' folder was empty, save for a Read Me.rtf file that had no application-specific details inside. So does this mean I had NO incompatible software? I have the following apps:
Adobe Creative Suite CS3
MS Office 2008
Finale 2009 (music notation software)
ProTools LE appears to be missing, but is not listed in the Incompatible Software folder
FYI - Adobe Illustrator quit when I opened a file for the first time. Seems to be working now.

It sounds like you didn't have any incompatible. You should be good to go.

AUDIO_TS folder is empty after Build completed

I've just run a Build and a Format (to DDP) of my single layer PAL DVD. The video track was .m2v and the were two .ac3 audio tracks.
The Build process completed with no errors. BUT, the resulting AUDIO_TS folder was empty. The VIDEO_TS folder had lots of files in it.
I am new at this... but shouldn't there be some files in the AUDIO_TS folder? I'd like to know if my DVD will have audio or not, and I don't know how to test the finished Format because the output was DDP.
iMac Mac OS X (10.4)
iMac Mac OS X (10.4)
iMac Mac OS X (10.4)

Thanks John !!
But standard stand alone player, can play them? What
else you get from them?
If you put 5.1 audio in a standard Video DVD with
just some menus to play . . . what less you get
compared with an Audio DVD 5.1?
I would guess most 'real' DVD players would accept it, and a few high end Audio systems.
Other than it being a surround sound Audio disk (unlike an ordinary CD) I am not sure it has any benefits. This may be why sales of DVD-A and SACD disks have flopped.
It was not my disk so I don't have much experience of it/them myself. I merely came in contact with it because a friend wanted help converting it to a plain vanilla Audio CD so he could play it in his car.
I just could not get anything on the Mac to work with it and ended up converting the video DVD version it also came with by extracting just the audio from that, splitting it in to tracks and then burning to an Audio CD.

Folder is Empty After Restore

I recently had several genius appointments to fix my MB Pro. They replaced the logic board, then the hard drive, and then another logic board as a repair. I did a Time Machine restore after the hard drive was changed out and it went fine except the folder I was working in last (8 mp3 files) is still there but empty. I was editing with Audacity. Thoughts?
I've tried to do a Spotlight search for the invidual files with no luck

Hi Harini,
I did search on entire server folder to look for com.sap.portal.runtime.logon.par.
It found out same at location <J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\temp.
But question here is why pcd is empty and all par files are inside temp.
any idea?
Again is it due to fault installation of server?
Regards,
Madhvika

Adobe PCD folder permissions change after launching CS5 programs

There is a folder apparently important for Creative Suite
5 licensing: C:\program files (x86)\common files\adobe\adobe pcd
Unfortunately the default permissions after installing (either standard install or install from Adobe Enterprise Deployment tools) are:
Everyone: Read
Administrators: Full Control
This presents a problem for using the software if your users are not local administrators.
If you change the folder permissions to grant access to other users, than launch InDesign and/or Photoshop, the Adobe PCD permissions revert to their original settings. I have verified that my permissions save fine by closing and reopening the folder permissions. It's only after a CS5 program is launched that the permissions revert.
How can I get the permissions to stay? Until then I have to make people local admins, which is not good if they find out. They will install all kinds of crapware and crappy legit software and break their computers further.
Thanks,
Josh G
Portland, OR

Hello Stu,
We are running Windows 7 Enterprise 64 bit. I don't think running this particular operating system is unique.
The only other idea I have at the moment, besides having everyone be a local administrator, is to write a script that updates the folder permissions. The tricky part is figuring out how often the script should run. I'm guessing that the script should run daily but I'm not sure that is frequent enough. I suppose if the script ran hourly that wouldn't hurt anything.
Josh

Media folder suddenly "empty" after restart... what happened?

I've been having problems with my MDD over the past couple weeks, ranging from the inability to force quit to having very slow system reactions for basic tasks.
Now, I've probably come to the apex of frustrations within the past few hours because I've got a failing hard drive. This particular hard drive has four partitions on it. Of the four partitions, one of which was used primarily for video storage. One folder in particular had about 150 GB of data in it, and the total remaining free space on this volume equaled about 2 GB. Unfortunately, after having to perform a forced shut down, this folder now shows up as having "Zero KB for 0 items" (even though I didn't manually delete any of this folder's items), but the volume's total remaining free space is still standing 2GB.
I also think that it's important to point out that the partition this folder is on has, according to the OS, become irreparable by the computer. As a result, this volume has become read-only, so I don't know if it's possible to access these files through as a Root User (wouldn't hurt to try).
Any thoughts or suggestions as to how I might regain access to these files -- if at all?

You must repair the HD, if Disk Utility or fsck should fail to repair it, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83

Prvisioning folder is empty after Identity center crashed

Hello,
During our work on the Identity center console, the console suddenly crashed & since then all the provisioning folders are empty.
We fear that the Database might be corrupted.
What can we do to restore the lost data?
We are going live in 2 weeks with the system & this is a serius show stopper for us.
Thanks is advance,
Yoav Zilberman

Hello Yoav,
what have you tried out by now? The first thing I would do is to delete and re-add the identity center configuration in the MMC, because this does not affect the database at all. Second thing I would check is the content of the database in some tables/views like MC_REPOSITORY, MC_DISPATCHER, MXIV_SENTRIES, etc. Or maybe a re-adding of the SAP Provisioning Framework could help or is your won work affected only?
Have you established contact to the SAP already?
Best regards
Dominik

Oradata folder is empty after install

Hello
I've tried to install Oracle 10g XE many times in my computer, but every time I do it, it doesn't install anything in the oradata folder. I thought it might by a problem caused by not having enough user rights, but everything else seems to be right.
I'm using Windows XP Professional SP2.
Does anyone know what can be happening?
Message was edited by:
user550816

Did you look at the installActionsxxx.log file? I believe for Express Edition this is still stored in C:\program files\oracle\inventory\logs directory. Take a look at the log files in this directory.

Folder Appears Empty After Moving Applications Into It!

I clicked to add a folder on the main page and the folder was created fine. Then i clicked on an application and selected the "move" option and put it into the new folder I just made and then i open that folder and there is nothing in it! it just says "options" at the bottom of the screen and I can't click on anything. Anyone know how I can get some of my icons that I don't use that much into just one folder?
THANKS!!!

I had this problem too! Just pull your battery out with the phone ON and leave it out for 30 seconds. Put it back in and the phone will automatically reboot. Usually 1-3 minutes. Then check your folders again and let us know how it goes. Good luck.
~Lorrie~ Master of All Things Blackberry!

The PCD folder with all par files in the portal is empty

Hi all gurus.
I have a customer that failed with a transport of iviews between two portals, the par file was not included even if attribute "include dependent objects" was checked.
I have met this problem before and the only(?) solution is to download the par file separately and import it into the receiving portal and then create a new iview from it.
Here is my problem: when I at this certain customers portal go to "System Administration > Support > Support Desk > Portal Runtime > Test and Configuration Tools > Browse Deployment" and then browse to "Root > WEB-INF > deployment > pcd" that last folder is empty! Blank!!!
On all portals I've seen that folder alwasys shows all standard par files along with deployed stuff but here the folder just shows a white page with the text "The folder is empty".
I don't think it's a matter of authority since I have added "super-admin role" and all possible content admin roles to my user without any change, the folder is still empty.
Does anyone have an idear about what is going on here?
Best regards
Benny Lange

Hi Raghu.
Your are missing my point: it's not about what content to export, it's about the folder being totally empty. I can't see the par files belonging to our deployed code either.
Of course I could upload the par file from Eclipse workbench from where I first uploaded the par file to the development enivironment, but I find it alarming that the folder is empty when it's full of par files in every single portal I have seen so far.
Best regards
Benny

Even after uninstalling, reinstalling Firefox, the Firefox profile folder is empty, and I get the message "Firefox is still running and not responding close firefox...

Even after uninstalling, reinstalling Firefox, the Firefox profile folder is empty, and I get the message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." I have followed all the directions I can find, on my computer and Firefox Support. Still, the same message comes up, and "firefox" is not shown in my Windows Task Manager.
What can I do?

Delete the profiles.ini file and let Firefox create a new default profile.
* http://kb.mozillazine.org/profiles.ini_file
* http://kb.mozillazine.org/Profile_folder_-_Firefox#Files_and_folders_outside_the_profile_folder

Sent folder does not appear after installation. What to do to see the sent folder?

After installation, the inbox and trash folders are there. The local folders are also there. But the sent folder is not there. How do i get the sent folder together with the sent emails.

Have you sent any messages yet?

IWork Folder Empty after Fresh install

First it would not allow me to install. Did a search for all files related to iWork.
Trashed and Empty Trash.
Finally, it allowed me to install iWork. But, now I can see a folder in my Applications directory with the Folder named iWorks. But, that directory is empty.
In my /Library/REceipts/directory.
I do have a iWorks Extra and a iWork Fonts.pkg
But, I do not see a iWork.pkg???? should one be there???
Would that explain why my iWork folder is empty?
I do have to say, that this software from Apple is the worst install I have ever encountered.
This coming from Apple is simply sad. Being an Apple customer since my first purchase of a Mac Plus, Mac ll extra. I simply can not see how Apple has not taken better care in resolving install issues of this fine product.
robert

OK it looks like you did a spotlight search for all files with the name iWork and trashed them. Did you also trash the receipts for Keynote and Pages? Those files will not necessarily be detected with a search for iWork.
Search in the folder Hard Drive/Library/Reciepts and trash any files relating to Keynote and Pages. Also check for the receipts in your users folder (something like Hard Drive/Users/robert/Library/Reciepts/)
Check that those files have been trashed then try to install from disk again.
I do have to say, that this software from Apple is the worst install I have ever encountered.
Actually it was set up so that you don't have to install anything. iWork often comes pre-installed on new machines and runs in demo mode. Apple set it up so that all you have to is type in the serial number after purchasing the software. Problems arise when people try to delete and reinstall iWork.
For more info see the previous discussion on this topic:
http://discussions.apple.com/thread.jspa?threadID=253832&tstart=30
Happy Holidays!
Apple IIc Plus, 4MHz, DOS 3.3

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

OBS not working after Installation

Hi All,
I am having a had time to make OSB 10.3.0.3 x64 working on my Dell 1850 x64 machine with Windcows Server 2008 x64 on it.
OK, I've done is:
I do have a SCSI card attached to this server and a tape drive. All system is up to date with all latest drivers and firmware. I did install HP StorageWorks Library and Tape Tools to test my tape drive connectivity and performace and it is all good. After that I did install OSB , the installtion went just fine and it let me pick my tape drive. ...... and here I have issues....
1. After I finished my installation I went to windows services mmc to see if OSB service is running...and it wasn't, so I started it.
2. I went to CMD and typed "obtool" and got an error message:
obtool: Error: this host's identity to Oracle Secure Backup has not yet been established.
3. I tryed to run a Web Administration Tool and got an error page.
4. Restarted the server.
5. Apache log folder in OSB Home is empty, there is nothing there. Another thing I found that my "OSB HOME \admin\config" folder has only "dataset" folder in it when it should have folders inside. It looks like it is not configuring Apache and OSB domain for me after installation.
6. Went to CMD and run: "obtool --initnewdomain" and it let me to crete it. Even let me to get onto obtool after that but Web Admin Tool is still not working.
7. I run my HP StorageWorks Library and Tape Tools again to see if SCSI card and drive connectivity is fine.... and it cannot detect my drive anymore.
So, I did a lot of rebooting and reinstalling and it still doesn't work. There is nothing running on the same TCP port on my system and as long as OSB is installed I can not get into my tape drive using HP Tape drive tools, not even detect it.
I did a bit more testing, instead of installing x64 OSB version I did try to install x86 (32 bit) on my x64 machine. The result is that Web Admin tool is still down (I am sure it is because Apache x86 on x64 machine) which is OK, and obtool is running fine, I can start it....... so, what would be your suggestion ?
P.S. I do have a development server, which is absolutely the same including SCSI card, the only difference is that it has Windows 2003 x86 installed and has DB 11g running on it. I did connect my tape drive to thys system, installed OSB for testing and Web Admin Tool, obtool was just fine. I even was simply able to test tape backup from EMC using OSB.
Thanks

I did that....and many times.
I, figured it out!!!! When I did try to manually run "obhttpd.exe" it gave me an error that "msvcr71.dll " is missing. I've found that MS .Net Framework and MS Visual C++ 2005 contains it. So, before installing any updates on my machine, I did install all MS .Net Framework versions from 1.1 to 4.0 including all updates and Microsoft Visual C++ from 2005 to 2010. In addition, I did copy this DLL file into my System32 folder. Did install OSB and it still didn't work but "obhttpd.exe" was starting without error messages. The only thing I didn't try yet was to rename a server. So my server name was "san-manage3" and I renamed it to "san-bk3", rebooted, installed OSB and it worked. So, I don't know if it is because of long DNS name or all together, but it is fine now.

Pcd folder is empty after installation

Similar Messages

Maybe you are looking for