PcHDTV 5500 with 2.6.20-4

I was running 2.6.19 on my mythtv server, and I did a pacman -Syu today...it updated the system to 2.6.20-4. All seems to work except for my dvb cards! I no longer have a /dev/dvb folders (I have two tuners)
dmesg |grep dvb yeilds nothing.
lsmod shows cx88xx modules loaded, but I can only get to the v4l analog portion of my two tuner cards. Does anyone know of any modules I may need to manually load now? With 2.6.19 is "just worked"
I'm really hopeing there is just something I missed...

I figured out how to go back to 2.6.19 and my problems have 'gone away'
I will try the newer 2.6.20-? kernels to see if they end up working. At the pchdtv.com site it proudly states that "2.6.20 gives full support" for the pchdtv cards. Hmmm...

Similar Messages

Connecting the nexus 5500 with multiple vsans

Hi,
it's my first experience in the fibre channel world and i have a few doubts about the best way to connect the nexus 5500 to a EMC storage.
This is my scenario
this is my configuration:
vsan database
vsan 2
vsan 2 interface fc 1/1
vsan 3
vsan 3 interface fc 1/2
interface fc1/1
switchport mode f
no shut
interface fc1/2
switchport mode f
no shut
now I don't know how can I connect the port fc1/3 to the vnx storage, I think I can't make a trunk like ethernet, can anyone help me?
Or i only can do this with zoning
Thanks
Fred

Hello Fred,
All interfaces must be in the same vsan for them to see each other
vsan database
vsan 2 interface fc1/1, fc1/2, fc1/3
exit
Then you can zone each separately
example:
zone name host1 vsan 2
member pwwn 11:11:11:11:11:11:11:11    (host1 pwwn)
member pwwn 33:33:33:33:33:33:33:33    (VNX)
zone name host2 vsan 2
member pwwn 22:22:22:22:22:22:22:22    (host2 pwwn)
member pwwn 33:33:33:33:33:33:33:33    (VNX)
zoneset name Zoneset1 vsan 2
mem host1
mem host2
zoneset activate name Zoneset1 vsan 2
Thanks

WLC 5500 with multiple APs

We have a WLC 5500 apliance, but i have a problem, the APs have a administrative IP in a diferent segment, only conected to WLC the AP have same segment of the management interface, the 5500 don´t have APmanager interface.
How configurate the WLC to conected and administrate all AP with different segment IP
Product Version.................................. 6.0.182.0
chasis: AIR-CT5508-K9

You may check this article about the discovery process:
http://tiny.cc/lqu1zw
Now, with what Steve above is trying to say is that with 5508 the management interface itself is the AP manager interface (by default). so, management and ap-manager interfaces are merged into one interface with same IP address. You can change this behavior but this is the default.
The article will tell you what mechanisms can be used to direct the APs to join the WLC even if they are on different subnet.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Uplink-ID 0 in Nexus 5500 with FEX 2248.

Hi all,
I've got 2 Nexus 5548 and a fex 2248 connected to both of them via a vPC. 1 Uplink port goes to N5K-01 e1/10 and a second Uplink port goes to N5K-02 to port e1/10.
On the log of the first Nexus 5500 I see this:
N5K-01 %FEX-5-FEX_PORT_STATUS_NOTI: Uplink-ID 0 of Fex 103 that is connected with Ethernet1/10 changed its status from Configured to Fabric Up
N5K-01 %FEX-5-FEX_PORT_STATUS_NOTI: Uplink-ID 1 of Fex 103 that is connected with Ethernet1/10 changed its status from Fabric Up to Connecting
N5K-01 1 %FEX-5-FEX_PORT_STATUS_NOTI: Uplink-ID 1 of Fex 103 that is connected with Ethernet1/10 changed its status from Connecting to Active
On the log of the second nexus 5500, I see this:
N5K-02 %FEX-5-FEX_PORT_STATUS_NOTI: Uplink-ID 0 of Fex 103 that is connected with Ethernet1/10 changed its status from Configured to Fabric Up
N5K-02 %FEX-5-FEX_PORT_STATUS_NOTI: Uplink-ID 2 of Fex 103 that is connected with Ethernet1/10 changed its status from Fabric Up to Connecting
N5K-02 %FEX-5-FEX_PORT_STATUS_NOTI: Uplink-ID 2 of Fex 103 that is connected with Ethernet1/10 changed its status from Connecting to Active
What is the difference between Uplink-ID 0, 1 and 2? If I only have 2 uplink ports, why is there a third one?
Thanks in advace for your assistance.

Hi Sonu,
I see the similar problem on my nexus5ks. show cfs peer does not display the peer information. I have been waiting for hours now.
sw01# sh cfs peerCFS Discovery is in Progress ..Please waitCould not get response. The network topology may be under going change.Please try after about 30 seconds
Did you find the fix7workaround of this problem ?
Regards,
Umair

Printing on HP Designjet 5500 with foomativ exits with status 9

Printing on HP Designjet 5500 over TCP/IP or Bonjour using Foomatic-RIP fails with status 9. Trying to use other drivers (HP Designjet 750C (gimp-print)) works for page sizes smaller that DIN A3 but crashs the printer for bigger sizes.
For Foomatic-RIP I get following messages in /var/log/cups/error_log:
I \[08/Jul/2009:19:18:29 \+0200] Job 10 queued on '129_247_20514' by ''.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/pstopdffilter (PID 14639) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/cgpdftopdf (PID 14640) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 14641) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started backend /usr/libexec/cups/backend/lpd (PID 14642) for job 10.
E \[08/Jul/2009:19:18:30 \+0200] PID 14641 stopped with status 9!
I \[08/Jul/2009:19:18:30 \+0200] Hint: Try setting the LogLevel to "debug" to find out more.
I have the following configuration:
OS-X 10.4.11, gs 8.6.4, pxlmono 1.2, Foomatic-RIP 4.0.2.211, HP DesignJet_5500-cdnj500.ppd
The printer is connected on Ethernet and is in the same network segement (it is visible in AppleTalk and Bonjour. A connection with TCP/IP (lpd) is also possible.
Message was edited by: Lefti

I've built foomatic against the ghostscript install as your instructions say; compilation and installation all seems to be fine with no errors but prints still do not appear on the printer.
Is there anything else I can try?
Many Thanks and apologies for the huge length of this post...
Sam
GPL Ghostscript 8.70 (2009-07-31)
gs -h | grep 'cdnj500': cdj550 cdj670 cdj850 cdj880 cdj890 cdj970 cdjcolor cdjmono cdnj500 cfax
foomatic rip version 4.0.2.211
One thing that I have noticed is that the cups error log has a lot of authentication entries, though they all seem to result in OK;
D [18/Aug/2009:14:17:00 +0100] cupsdReadClient: 15 POST / HTTP/1.1
D [18/Aug/2009:14:17:00 +0100] cupsdAuthorize: No authentication data provided.
D [18/Aug/2009:14:17:00 +0100] Get-Printer-Attributes ipp://localhost/printers/designjet5500__Q1251A___00306ECA2FB9
D [18/Aug/2009:14:17:00 +0100] cupsdProcessIPPRequest: 15 status_code=0 (successful-ok)
This is the output from the foomatic log:
foomatic-rip version 4.0.2.211 running...
called with arguments: '3', 'sam', 'testprint.ps', '1', 'APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f'
Getting input from file
Parsing PPD file ...
Added option PageSize
Added option ImageableArea
Added option PaperDimension
Added option InputSlot
Added option Quality
Added option Font
Parameter Summary
Spooler: cups
Printer: 43_194_241139
Shell: /bin/bash
PPD file: /private/etc/cups/ppd/43_194_241139.ppd
ATTR file:
Printer model: HP DesignJet 5500 Foomatic/cdnj500 (recommended)
Options: APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f
Job title: testprint.ps
File(s) to be printed:
<STDIN>
Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
Printing system options:
Pondering option 'APDInputSlot='
Unknown option APDInputSlot=.
Pondering option 'pserrorhandler-requested=standard'
Unknown option pserrorhandler-requested=standard.
Pondering option 'nocollate'
Unknown boolean option "nocollate".
Pondering option 'com.apple.print.PrintSettings.PMColorMatchingMode..n.=0'
Unknown option com.apple.print.PrintSettings.PMColorMatchingMode..n.=0.
Pondering option 'com.apple.print.JobInfo.PMJobName=testprint.ps'
Unknown option com.apple.print.JobInfo.PMJobName=testprint.ps.
Pondering option 'APColorMatchingMode=APApplicationColorMatching'
Unknown option APColorMatchingMode=APApplicationColorMatching.
Pondering option 'job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f'
Unknown option job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f.
Options from the PPD file:
Starting process "reset-file" (generation 1)
reset-file exited with status 0
================================================
File: <STDIN>
================================================
Filetype: PostScript
Reading PostScript input ...
--> This document is DSC-conforming!
Found RBINumCopies: 1
Found: %%BeginProlog
Found: %%EndProlog
Found: %%BeginSetup
Found: %%BeginFeature: *PageSize Letter
Option: PageSize=Letter
Setting option
Found: %% FoomaticRIPOptionSetting: PageSize=Letter
Option: PageSize=Letter
Setting option
Found: %%BeginFeature: *Quality normal
Option: Quality=normal
Setting option
Found: %% FoomaticRIPOptionSetting: Quality=normal
Option: Quality=normal
Setting option
Found: %%EndSetup
Inserting PostScript code for CUPS' page accounting
New page: %%Page: 1 1
Found: %%BeginPageSetup
Inserting option code into "PageSetup" section.
Flushing FIFO.
Starting renderer with command: "/usr/local/bin/gs -sstdout=%stderr -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=cdnj500 -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dQuality=0 -sOutputFile=%stdout -_"
Starting process "kid3" (generation 1)
Closing renderer
Starting process "kid4" (generation 2)
Starting process "renderer" (generation 2)
JCL: -12345X@PJL
@PJL SET MEDIASOURCE=AUTOSELECT
@PJL SET CUTTER=OFF
<job data> -12345X@PJL RESET
PAGE: 1 1
renderer exited with status 0
kid4 exited with status 0
kid3 finished
kid3 exited with status 0
Closing foomatic-rip.
And the output from CUPS error_log (trimmed to remove duplicates etc.):
D [18/Aug/2009:14:17:00 +0100] Print-Job ipp://localhost/printers/designjet5500__Q1251A___00306ECA2FB9
D [18/Aug/2009:14:17:00 +0100] [Job ???] Auto-typing file...
I [18/Aug/2009:14:17:00 +0100] [Job ???] Request file type is application/postscript.
D [18/Aug/2009:14:17:00 +0100] add_job: requesting-user-name="sam"
D [18/Aug/2009:14:17:00 +0100] Adding default job-sheets values "none,none"...
I [18/Aug/2009:14:17:00 +0100] [Job 2] Adding start banner page "none".
D [18/Aug/2009:14:17:00 +0100] Discarding unused job-created event...
I [18/Aug/2009:14:17:00 +0100] [Job 2] Adding end banner page "none".
I [18/Aug/2009:14:17:00 +0100] [Job 2] File of type application/postscript queued by "sam".
D [18/Aug/2009:14:17:00 +0100] [Job 2] hold_until=0
D [18/Aug/2009:14:17:00 +0100] Discarding unused printer-state-changed event...
D [18/Aug/2009:14:17:00 +0100] [Job 2] job-sheets=none,none
D [18/Aug/2009:14:17:00 +0100] [Job 2] banner_page = 0
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[0]="designjet5500__Q1251A___00306ECA2FB9"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[1]="2"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[2]="sam"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[3]="testprint.ps"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[4]="1"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[5]="APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:b5be6143-9e7f-3cd7-6719-7df9ce42aa47"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[6]="/private/var/spool/cups/d00002-001"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[0]="<CFProcessPath>"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[8]="CUPS_STATEDIR=/private/var/run/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[9]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[10]="[email protected]"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[11]="SOFTWARE=CUPS/1.3.8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[12]="TMPDIR=/private/var/spool/cups/tmp"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[13]="USER=root"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[14]="CUPS_SERVER=/private/var/run/cupsd"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[16]="IPP_PORT=631"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[17]="CHARSET=utf-8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[18]="LANG=en_US.UTF8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[19]="APPLE_LANGUAGE=en-US"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[20]="PPD=/private/etc/cups/ppd/designjet5500__Q1251A___00306ECA2FB9.ppd"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[21]="RIPMAXCACHE=8m"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[22]="CONTENT_TYPE=application/postscript"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[23]="DEVICEURI=mdns://designjet%205500%20%28Q1251A%29%20%2800306ECA2FB9%29._pdl-datastream.tcp.local./?bidi"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[24]="PRINTER=designjet5500__Q1251A___00306ECA2FB9"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[25]="FINALCONTENT_TYPE=printer/designjet_5500__Q1251A___00306ECA2FB9"
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started filter /usr/libexec/cups/filter/pstops (PID 71849)
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 71850)
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started backend /usr/libexec/cups/backend/mdns (PID 71851)
D [18/Aug/2009:14:17:00 +0100] Discarding unused job-state-changed event...
D [18/Aug/2009:14:17:00 +0100] [Job 2] mdns backend exec'ing /usr/libexec/cups/backend/socket to connect to socket://NPICA2FB9.local.:9100/?bidi
D [18/Aug/2009:14:17:02 +0100] [Job 2] Connected to 43.194.241.139:9100 (IPv4)...
D [18/Aug/2009:14:17:02 +0100] [Job 2] backendRunLoop(print_fd=0, device_fd=5, use_bc=1, side_cb=0x765bb388)
D [18/Aug/2009:14:17:02 +0100] Discarding unused printer-state-changed event...
D [18/Aug/2009:14:17:07 +0100] [Job 2] Page = 612x792; 14,34 to 598,778
D [18/Aug/2009:14:17:07 +0100] [Job 2] slow_collate=0, slow_duplex=0, slow_order=0
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_comments - %!PS-Adobe-3.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] %!PS-Adobe-3.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%BoundingBox: 0 0 612 792
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Pages: 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%LanguageLevel: 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentData: Clean7Bit
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentSuppliedResources: procset testprint/1.3
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Creator: Michael Sweet, Apple Inc.
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%CreationDate: D:20070606214000+0500
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Title: Test Page
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%EndComments
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_prolog - %%BeginProlog
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_setup - %%Page: 1 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before page loop - %%Page: 1 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] Copying page 1...
D [18/Aug/2009:14:17:07 +0100] [Job 2] pagew = 583.7, pagel = 743.8
D [18/Aug/2009:14:17:07 +0100] [Job 2] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageLeft = 14.2, PageRight = 597.8
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageTop = 777.8, PageBottom = 34.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageWidth = 612.0, PageLength = 792.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] Wrote 1 pages...
D [18/Aug/2009:14:17:07 +0100] PID 71849 (/usr/libexec/cups/filter/pstops) exited with no errors.
D [18/Aug/2009:14:17:09 +0100] [Job 2] Read 8192 bytes of print data...
D [18/Aug/2009:14:17:09 +0100] [Job 2] Wrote 8192 bytes of print data...
D [18/Aug/2009:14:17:09 +0100] PID 71850 (/usr/libexec/cups/filter/foomatic-rip) exited with no errors.
D [18/Aug/2009:14:17:14 +0100] PID 71851 (/usr/libexec/cups/backend/mdns) exited with no errors.
D [18/Aug/2009:14:17:14 +0100] [Job 2] File 0 is complete.
I [18/Aug/2009:14:17:14 +0100] [Job 2] Completed successfully.
D [18/Aug/2009:14:17:15 +0100] [Job 2] Unloading...

Replace the inspire 5.1 digital 5500 with the creative labs ddts-100 decoder upto 7.1

i bought the inspire 5.1 digital 5500 i was wondering if you can change the decoder with the creative labs ddts-100 digital decoder upto 7.1 they have it on ebuyer thanks...

joseru,
Duplicate thread.
Cat

Inspire 5500 with s/pdif

Hello... I am new to this forum as well as to sound related stuffs. After reading through lot of other topics and knowledge base, i have chosen 5.1 Inspire 5500 to go for. I chose this because of the built in decoder coming and low cost. I have recently bought a Lenovo y500 speaker model release in india.. (http://www-8.ibm.com/lenovoinfo/in/y...ce/y500_2.html) (Y500(7766AQ)). So it says the audio out also supports s/pdif. So is this enough to connect to 5500. Or do I need any sound cards.... Also can some one suggest me is there any other alternative at this price .... Note : Audio driver is Realtek HD Audio?Can the speakers be used? with analog systems as well...

I couldn't find anything related to S/PDIF in the link you provided, but your speakers support both coax and optical digital audio. If you know your computer supports S/PDIF, then you're good to go. The computer will have one (if not both) of those connections on it.
The only thing to look out for is a mini optical jack (looks like headphone jack, but isn't) and "mini" coax jacks, which are actual headphone jacks which output a different signal. Either one of those will require an adaptor, but they are easy to find.
You should also be able to use analog. I doubt the computer only has digital connections.

5500 with audigy DVD Playback probl

I had my logitech 5500's connected to my onboard nvida soundstorm for awhile but i decided to put my old audigy in just for kicks. It installed fine, but i can't seem to find a mixing console or any other software besides the basic audigy console. My 6ch direct is really loud with music and sounds great but when i playback dvd with cyber dvd, the volume is severely diminished and the speech especially could hardly be heard at all.
I adjusted my settings in the audigy audio console with built it decoder and set my cyberplayer settings as SPDIF so the compressed audio would be decoded by my audigy soundcard, but it still doesnt work. any suggestions?

Sound is fine its just the picture that has the problem but I have narrowed it down further by downloading WinDVD Tweaker. If I disable DxVA but leave hardware decode and colour selected the problem isn't present. Therefore I suspect something has corrupted my DxVA drivers however as I originally had 8.1 installed and then installed 9.0 in an attempt to fix this I don't think a reinstall of DX will solve the problem.
Any ideas.
Cheers,
Morpheus

Has anyone interfaced an Instron 5500 with Labview?

I'm trying to get my company to buy labview. If I can get it to control an Instron 5500 they will be sold. Has anyone attempted to do this? Instron tells me that they do not have Labview drivers.

I did a couple of Instrons with Labview a few years back, but they were older models (2725 and 2734 if my memory serves me right for numbers). I wrote the daq and machine control software in Labview from scratch. Neither of these machines was new enough to have a GPIB port, they were the type with the old mechanical recorder outputs. I had to re-work some of the machine mechanics and electrics to take a custom interface adapter from a NI Lab 1200 Daq card. I also had to build a custom extensometer for one unit. I don't know if I could be of any help to you, but I would be willing to work with you via e-mail and offer what assistance I can. I have 38 years in custom machine controls and general process instrumentation, so I have quite an extensive background to call upon. If you are interested drop me an e-mail at:
[email protected]
Dave

Problem with logitech Z-5500 with Creative X-Fi when connecting SPDIF

Hi all,
I just purched Logitech Z-5500 speakers and Creative X-FI Titanium and plugged it using SPDIF connection (optical).
I configured everything in my computer to work with SPDIF but still i see in the Z-5500 monitor that it's "Stereo" and i cannot hear DST or surround. The rear speakers do not work!
how should i configure it's
In my previous Realtek audio card i had an option for "speaker fill" and then i got good surround (but not with optical connection).

Hello Visionblind,
You might want to check out this thread.

Layer 3 config design on Nexus 5500 with Fabric Path

I trying to Network deisgn for new data Center , i am new to DataCenter desgin, i attached the network diagram
i would like to know if can configure my layer3 on 5500 and configure Fabric path to uplink switch
please help give your suggestions on this design

You can configure layer-3 on the 5500 series, but you need to install a daughter cards in each 5500.
See this link:
Layer 3 Daughter Card and Expansion Module Options for Cisco Nexus 5548P, 5548UP, 5596UP, and 5596T Switches
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-618603.html
HTH

Sound Blaster Fatal1ty Chapionship and Z-5500 With Dolby And DTS Pack.

. I cant get the encoder to work on the program all I get is format is not supported. Im using a optical cable and Its driving me insane. Any help would be great. As you can tell what I have going on here on the screen shot but hell... I cant get dolby or DTS to work keeps giving me that message. <img border="0" width="799" src="http://i9.photobucket.com/albums/a90/bravounit9/Untitled-.jpg" height="653" align="bottom">@75.8.77.249

J. Ok so I got it all working..... But if it can only be played at 48khz I thaugh 92khz is better. Cause I notice when I went from prologic 2 to just optical Digital I dont see that number on my uppper right pud it doesnt say on there 96khz anymore.... :\ So what is 48khz suppose to be better? By the way thanks for all the help also. You guys been helpful.. Just like to know more. Im new to this whole dolby digital. My first speakers that are Dolby Digital. Never hade Dolby Digital speakers [email protected]

5500 Sports Mode with GPS

I'm using the sports mode on the 5500 with a bluetooth GPS and have concerns over the accuracy of the distances travelled. It regularly gives a figure 10% higher than that expected but I don't know whether the problem is with the phone or the GPS. I'm using the miniature GPSlim 240 supplied with the Navicore SAT NAV product but wondered if anyone else had similar experiances with other GPS products.

Strangely enough, i found the pedometer function to be quite accurate... but only on level ground. When hillwalking, it really doesn't take the gradient into consideration. (Especially not for the calorie burn part)

Using Kodak AiO 5500 over Airport Express- works on my Mac, but not on PC

The subject says it all, folks. Just got a new Airport Express 802.11n and hooked up both printers (Samsung ML-1740 and Kodak AiO 5500) with a powered USB hub. Both printers are visible in Airport Utility (and Bonjour Printer Services in Windows).
I'm running OS 10.6.3 on a MacBook Pro, 15" 2.4GHz Core2Duo system. On this system I can use both the Kodak and Samsung, no problem. But then on both of my parents' PCs only the Samsung printer works, although I can see both using Airport Utility and Bonjour Printer Service.
What the heck is going on??
Thanks in advance!

I would perform the following steps for testing:
1. Disconnect the Samsung printer, so that just the Kodak printer is connected.
2. Disable the firewall at the Windows machine (the Windows one and all third party)
If that's successfull, you can
3. Re-enable the firewall and you probably need to allow traffic on port 9100 (not 100% sure about the exact port)
4. Re-connect the Samsung printer

Power Mac 5500 hard disk woes...

I had a PM 5500 but with a faulty HD. I decided to swap in an 800 MB Quantum Trailblazer from a Performa 5200 I had laying around and was met with some success. However I wanted something a little bigger for my purposes so I found a 40 GB Western Digital Caviar and another 4GB Quantum Fireball SE from an older G3 I have. Here are where my problems start..
To format these, I have been using an external firewire drive enclosure so that I can do it from my Powerbook. So I try formatting and installing Mac OS 9.1 onto the 40 GB and no go. I try again with the 4 GB and still nothing.
This is what happens...
I boot up the 5500 with one of the other HDs in, and it gives me the floppy question mark error. It spins up, there's a delay before the question marks appears, then the HD sounds like it resets itself and the question mark is shown again. I've checked jumper positions and they are all on master. Just to see if it would help I tried other jumper positions but the computer obviously didn't like that so I was greeted with a black screen.
My question is.. What makes the 800 MB so special that it is allowed to boot, while the other two are victim to a continuous spin up, reset, spin up,
reset cycle. These two drives are both functional, and when I boot into the Mac OS 9 install they are recognized.
It is also important to note that I have tried to copy over the 8.6 system folder that resides on the working HD and copy them over to the other HDs, still met with no success. Also, this 5500 may be living in another chassis. I don't remember exactly but I do remember transplanting mobos from all-in-ones like the 5500 and the 5200 with their respective drives and outer plastics. Not sure if that would change anything.
I think I'm missing something and any help is greatly appreciated... Thanks.
Powermac 5500 Mac OS 9.1.x Not sure.. But I believe this 5500 lives in another chassis.. I might have swapped it some time ago.

If you format a drive in a firewire case, it might not get the drivers installed that it needs to work internally. Also, if I read your post correctly, you installed OS9 from your PB while the drive was in teh FW box. This is also a problem as the installers often install things that are needed by the computer hte installer is running on.
Is there some reason why you can't boot the 5500 from the OS9 installer and format and install the OS in the 5500? That's your best chance of success.

PcHDTV 5500 with 2.6.20-4

Similar Messages

Maybe you are looking for