PCI-6542 card for dynamic genration and static control

Hello
I am using only one PCI -6542 card. I want to use few channels for dynamic signal. These are control signals for the ADC. While the conversion is in progress I want to use remaining signals for switching relays for measurement.
Application requirements are as follows.
Channel 0-14 are for dynamic genration for giving control signal to ADC.
Channel 15-31 are for static control bits for relays.
Requirement is pattern should be running continiously and parallely I shoud able to switch the ralay. It can be in any order and any seqence as per the demand.
Thanks and Reards
Amol

Hello
I can able to solve this problem. For your referance I have attached here the code. Which works for this.
Thanks and Regards
Amol
Attachments:
application.vi ‏65 KB

Similar Messages

  • I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties​, am I looking in the wrong place?

    I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
    I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
    MAX says it recognizes all the cards in the chassiss.

    Jeremy, Thanks for the reply.
    I tried to set up the system as DAQmx.
    I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
    It didn't seem right that the system should behave that way, but I pressed onward.
    I then tried to create a new DAQmx Task
    When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
    Analog>>Voltage
    Analog>>Temperature
    Ana
    log>>Strain
    Analog>>Current
    Analog>>Resistance
    Analog>>Frequency
    Analog>>Custom Voltage with Excitation
    Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
    I had included the system report of what programs I am using, etc. as attached file nireport.txt
    After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
    Which I guess it is since both configurations are now set-up in MAX.
    I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
    't come up with
    Analog input>>POSITION>>LVDT
    When I try to create a new DAQmx task.
    Thanks for the help so far! As you can probably tell I am new at this.
    Ryan
    Attachments:
    nireport.txt ‏2 KB

  • I'm looking for a PCI UMTS card for Portege M700

    First of all Hi everybody, as above mentioned in the title is about the Portege M700, I'm looking for a PCI UMTS card for this model have here a 8775 Sierra lying around, but this is unfortunately not recognized in Win7, I can times someone may say what card for this laptop is, or even something where I could get so ...???
    Thanks apologize in advance

    Hi
    You need a 3G broadband module?
    As far as I know some of the M700 Portege series have been equipped with the 3G module I think its from Novatel but Im not quit sure
    However, if you need an part for the Toshiba notebook which would be compatible for sure, then the best place for buying such part is your ASP.
    The guys could check what parts are compatible and could order it from Toshiba if this would be really necessary
    Greets

  • Are there PCI thunderbolt cards for mac pro 3.1?

    are there PCI thunderbolt cards for mac pro 3.1?

    DCWinton wrote:
    Rick
    It's that last sentence I'm curious about.  "However a MacPro already has much more capability already built in than Thunderbolt can add."
    I'm thinking of getting a Mac Pro, but see that it doesn't seem to have Thunderbolt. I'm not sure if I care. The reason for the Mac Pro is that I'm topping out my 8gb RAM 27" iMac capacity with the volume of work going through it, and my tech tells me I'm pushing it too hard.  I use it to run a small law office, but usually have about 15 apps open, with lots going on in the network in the background.
    Is there any reason to wait until Apple puts Thunderbolt into the Mac Pro?
    Thunderbolt will not increase the performance capability of the MacPro. It will add a bus that can be convenient, especially later on when Thunderbolt devices become more common, more mature and better supported - oh, and with more common will come less costly. From a pure performance standpoint the existing PCIe slots are much more capable and cheaper to implement. You would be giving up nothing with a current MacPro.
    My opinion. Thunderbolt is really a great move forward in the long run - needed something to replace Firewire and this is it. But there is no reason to wait on Thunderbolt on MacPro - it is redundant.
    Rick

  • Ok, so now I need a new eSATA PCI Express Card for my Mac Pro

    I have a Seagate eSata External Drive which comes with an eSATA PCI card.
    The http://www.cwol.com/serial-ata/esata-pci-express-1-ext-1-int.htm site recommends this card: eSATA PCI Express Card - 1 eSATA II and 1 Internal SATA II Port, but it doesn't specify whether it works on a Mac Pro - any suggestions?
    Mac Pro Quad Core 2.66   Mac OS X (10.4.6)  

    Hi
    I think the Radeon 9800 is certainly the most powerful graphics card you could buy for your G4 and would do everything you need.
    Just be aware there are at least 3 different Mac versions though.
    There's a G5 version, the Radeon 9800 Pro Mac Special Edition, which is 8X AGP and has 256MB VRAM.
    There's an older Radeon 9800 Pro Mac Edition, which is 2X/4X AGP and has 128MB VRAM.
    Finally there's a newer Radeon 9800 Pro Mac Edition, which is 2X/4X AGP and has 256MB VRAM.
    So long as you get one of the 2X/4X AGP versions, either with 128MB or 256MB VRAM, it should work fine.
    It's perhaps also worthwhile mentioning they do require a separate internal power connection, although this can be taken from a hard drive molex power connector. Also they have a cooling fan which can be noisy.
    I hope this helps.

  • What is the best e-Sata PCI RAID card for Mavericks.

    What is the best e-Sata PCI RAID card for Mavericks.  Bought a new MAC PRO with Mavericks and the older PCI 1095,3124 that I used on older MAC Pro does not work.  The MAC sees it, but the drivers never show up as being installed.  If I could find drivers that work or a recommended PCI card it would be appreciated.
    Thanks

    PM made sense - 6 yrs ago when disk drives were much slower. Today it is a bottleneck.
    SAS makes more sense. Outside of SSD, no disk drive maxes out by itself one PM interface (an SSD will) but it also means just two drives are enough to do so. So check out why to avoid PM:
    www.macperformanceguide.com

  • Anybody using MOTU PCI 424e card for 2408 with new MacPro Cylinder?

    I upgraded my older Mac PRO tower which accepted multiple PCI 424e cards for the new Mac Pro cylinder.  I purchased from Magma their Express card cage with Thunderbold output in anticipation.  Computer arrived and I removed the card and inserted into the card cage,  directed audio to the card but no go.  iTunes, for example freezes when the card is selected.  My MOTU Digital Performer also does not allow Analog in or out with the card.
      I have contacted MOTU,  they do not have a solution.  Magma,  the card cage manufacturer has not come back with a solution.  Apple suggested visiting these forums for possible ideas.
      My studio is dead in the water until I solve this OR I need to go back to the slower old MacPro.
    Thanks in advance.

    Did you install the FCS suite onto the new computer by using the original disks?
    You should. Don't forget to run all updates, repair permissions and restart.
    Or did you migrate the applications from the older Mac? You should not do this.
    http://discussions.apple.com/thread.jspa?threadID=2113535

  • TS1292 hi, I've got itunes music card for my birthday and when I scratch the back to redeem the code everything gone, so no code, what can I do?

    hi, I've got itunes music card for my birthday and when I scratched the back to redeem the code everything gone, so no code, what can I do? I've been to tesco to customer service and they told to contact itunes support

    These are user-to-user forums. If the page that you posted from doesn't help then you can try contacting iTunes Support via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • HT1689 Why is my money gone my sister just gave me a card for $25.00 and I loaded it on iTunes and it logged me out and my money's gone PLEASE HELP!!

    hy is my money gone my sister just gave me a card for $25.00 and I loaded it on and I got out of my account and now the money's gone PLEASE HELP!?!

    Sounds like either the Display or Graphics chip, that will not be cheap to fix. Because it is a 2006 and getting on in years, it might be best to move whatever you want to keep over to your newer iMac using Firewire Target Disk Mode and let it rest in peace.
    see > How to use and troubleshoot FireWire target disk mode

  • Can i use other credit card for my id and purchase

    Can i use other credit card for my id and purchase

    Your original question did not mention seeing billing info.
    Here's how to contact iTunes Store Billing Support:
    iTunes Store: Contacting billing support

  • HT6006 Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for.  Can I get more information on it please.  The info in the statement is MHDBQJ1Z3G-0

    Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for.  Can I get more information on it please.  The info in the statement is MHDBQJ1Z3G-0

    Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
    If it's a charge though your iTunes Store account, it should be reflected in your Purchase History:
    http://support.apple.com/kb/HT4098
    If the charges are not reflected in the Purchase History, then it's most likely a fraudulent charge to your credit card directly or your credit card number has been stolen and used by someone else in another iTunes Store account rather than an unauthorized purchase through your account. In either case it will be up to your bank to handle.
    Regards.

  • TS1292 i got a itunes card for a gift and i cant activate it

    hi i got a 50 dollar itunes card for a gift and i cant reedeem the code and activate it

    Normally you would go back to the store from which the card was purchased and get them to handle the problem, but since this was a gift, that's probably not possible. Go here:
    iTunes Support
    and follow the instructions to report the issue to the iTunes Store. You'll want to include the serial number of the card; see:
    http://support.apple.com/kb/TS1292
    Regards.

  • Purchased software download card for Adobe photoshopelements13 and adobepremiereelements13 at my campus bookstore on Friday morning Oct 31.  Went through the process of entering product/serial numbers etc. and became "verified".  Downloaded the product (~

    Purchased software download card for Adobe photoshopelements13 and adobepremiereelements13 at my campus bookstore on Friday morning Oct 31.  Went through the process of entering product/serial numbers etc. and became "verified".  Downloaded the product (~2 hours in time), the proceeded to install.  At this - THIS point I was "told" I needed the 64 bit version (I have a 64 bit Lenovo T431s laptop).  My patience wearing thin... I returned to the Adobe site from which I had done everything to this point.  NOTHING with regard to a choice of 32 or 64 bit!  Looked closely at the info that came with the download card... again, nothing regarding 32 or 64 bit option.  Outlined this matter to Identit-e customer service... they said I need to contact Adobe.  Adobe site does not make it easy to do that.  Anyone have a solution and/or a suggestion?

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools

  • Dynamic PAT and Static NAT issue ASA 5515

    Hi All,
    Recently we migrated our network to ASA 5515, since we had configured nat pool overload on our existing router the users are able to translated their ip's outside. Right now my issue was when I use the existing NAT configured to our router into firewall, it seems that the translation was not successful actually I used Dynamic NAT. When I use the Dynamic PAT(Hide) all users are able to translated to the said public IP's. I know that PAT is Port address translation but when I use static nat for specific server. The Static NAT was not able to translated. Can anyone explain if there's any conflict whit PAT to Static NAT? I appriciate their response. Thanks!
    - Bhal

    Hi,
    I would have to guess that you Dynamic PAT was perhaps configured as a Section 1 rule and Static NAT configured as Section 2 rule which would mean that the Dynamic PAT rule would always override the Static NAT for the said host.
    The very basic configured for Static NAT and Default PAT I would do in the following way
    object network STATIC
    host
    nat (inside,outside) static dns
    object-group network DEFAULT-PAT-SOURCE
    network-object
    nat (inside,outside) after-auto source dynamic DEFAULT-PAT-SOURCE interface
    The Static NAT would be configured as Network Object NAT (Section 2) and the Default PAT would be configured with Twice NAT / Manual NAT (after-auto specifies it as Section 3 rule)
    This might sound confusing. Though it would be easier to say what the problem is if we saw the actual NAT configuration. Though I gave the reason that I think is probably one of the most likely reasons if there is some conflict with the 2 NAT rules
    You can also check out a NAT document I made regarding the new NAT configuration format and its operation.
    https://supportforums.cisco.com/docs/DOC-31116
    Hope this helps
    - Jouni

  • Best PCI-X / PCI video card for Solaris 10?

    I don't mean "best" in the "latest, greatest, fastest" sense, I mean best to denote visual properties and rendering, support, basically. My current machine (Compaq SR5250NX) has a PCI bus ATI Radeon 9250 (256MB RAM) that XSun detects and uses as an ATI 9200 Pro AGP. There are all sorts of performance/visual issues...when I minimize a window, it takes a second or two (literally) to minimize and you can watch it "draw down." Or sometimes when I minimize a window, it minimizes from the top down, and the desktop is redrawn vertically, very slowly. (So you can watch the window disappear top down.) This is *extremely frustrating and makes the entire desktop experience unpleasant.  This is unfortunate because I really like JDS. 
    So, which card has the best Solaris 10 (XSun) support? It can be either PCI or PCI-X. All I do is write text documents, program, and other general tasks. No graphics work or anything of that sort. I don't care if it's old and I have to get it used...it just has to have awesome support and enough power to handle JDS and normal apps (Sun Studio, SO 8, FF3, etc). I'm on a bit of a budget, so if it's possible to get this card for around $100..that'd be great.
    *Yes, I've read the HCL, and I know which cards are on there as supported, but it doesn't say anything about which card has the best support. 
    Thanks,
    ~Slow
    Edited by: SlowToady on Nov 18, 2008 6:43 PM
    reason: typo
    Edited by: SlowToady on Nov 18, 2008 6:44 PM

    Although I prefer ATI for personal use on other OSes, my last two Solaris workstations have had Nvidia Quadro video cards in them, and they've both worked very well. My previous workstation (A Sun w2100z that died a couple months ago) had a Quadro NVS 280, my new workstation has a Quadro Fx 1700, which performs extremely well even at 1920 x 1280. The Fx 1700 isn't what you would
    call cheap, though.
    You might want to try pick up a used Quadro NVS (at least something in the 2xx series), or one of the lower models in the Quadro Fx series.
    Tim
    PS: I'm going to be asking nearly an indentical question to this one in a minute, except about audio cards rather than video. :-|

Maybe you are looking for