PCI-6713 different updaterate with new driverversion

Hello!
I was just wondering if the maximum updaterate for PCI-6713 / 6733 cards has changed due to new driver version.
The old manual (322080E-01 / June 2002 Edition DAQ 671x & 673x Usermanual) said that the update rate
with 1 - 5 channels is max 1MS/s and for up to 8 channels it is max. 769kS/s (p60 chapter A-2)
The new manual (370735E-01 / June 2007) said nothing about any derating of updaterate with use of 8 channels.
May I therefore expect all 8 channels be able to operate with 1MS/s ?
BR Joerg

Hello J_Edegger,
Thank you for your post on our webforum. The specifications from the NI 6713 and NI 6733 are documented in a seperate document. Please find the following links;
NI 6713; http://www.ni.com/pdf/manuals/371011b.pdf
NI 6733; http://www.ni.com/pdf/manuals/371232b.pdf
If you are using less then five channels a FIFO update rate from 1 MS/s is possible. There are some specifications when using PC memory; this is depending on your PC hardware configuration.
Best regards,
Martijn
NI Netherlands
Martijn S
Applications Engineer
NI Netherlands

Similar Messages

How do I sync two different ipods with new iTunes software?

Up until I upgraded to the new software, I was able to quickly and easily sync both my iPods. One is an iPod touch; the other a classic. Now, I can't sync my classic. Any idea why or what I'm doing wrong? This new software, IMHO, is not that intuitive.

Is the following document of any help with that?
[How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

Duplicate layer to different document with new layer name.

I am trying to replicate the Photoshop function of "Duplicate Layer" where I can take a layer from an active document and duplicate it to a target document AND set the name of the new layer once it is copied.
Javascript is the language.
Windows CS4 if it matters.
Any suggested code snippets?
Thanks
-Mike

This will dupe the activeDocument to a new document.
function newDocFromLayer(docName,layerName){
     docName == undefined ? docName = "Untitled":docName;
     layerName == undefined ? layerName = activeDocument.activeLayer.name:layerName;
    var desc = new ActionDescriptor();
        var ref = new ActionReference();
        ref.putClass( charIDToTypeID( "Dcmn" ) );
    desc.putReference( charIDToTypeID( "null" ), ref );
    desc.putString( charIDToTypeID( "Nm " ), docName );
         var ref1 = new ActionReference();
        ref1.putEnumerated( charIDToTypeID( "Lyr " ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
    desc.putReference( charIDToTypeID( "Usng" ), ref1 );
    desc.putString( charIDToTypeID( "LyrN" ), layerName );
executeAction( charIDToTypeID( "Mk " ), desc, DialogModes.NO );

Restore Rman hotback in different machine with different Database name

Hi All,
I have oracle 11.2.0.3.0 in Windows 2003 R2 server 64 bit version,i have my production database "Proddb" in archivelog mode , I have taken RMAN hot backup at 9 AM and i want to restore this RMAN backup into new Machine with new Db Name "Testdb" at 1 PM ,in between 9 AM to 1 PM lots of transactions happened , lots of archivelogs got generated ..
Can anyone tell me how to restore RMAN Backup in different machine with new Db name and also how to apply those archive logs which got generated between 9 AM to 1 PM.
Thanks & Regards,
Vikash Jain

http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814Yes you will have to apply all those archivelog after yours last backup 9:00 AM to 1:00 PM , someone give you good link to restore the RMAN backup from one machine ot another machine but it is missing one thing which you require is to restore database at new machine with new DB_NAME , for that you can do it in two ways after restoring and recovering the database.
1)After restoring with original name "Proddb" do not recover database ,Create contorlfile in control.txt format using alter database backup controlfile to trace,Shutdown restored database ,delete/rename contorolfile ,recreate controlfile from control.txt which by setting its first line as
Create controlfile set database "Testdb" resetlogs noarchivelogStartup mount with new created controlfile after defining new controlfile in pfile ,recover database at sql using backup controlfile "recover database using backup controlfile untill cancel" supply log till 1:00 PM ,Open database with resetlogs,run at comand prompt
sqlplus "/ as sysdba" @aduplib.sql so2)Or better approach is http://docs.oracle.com/cd/B28359_01/server.111/b28319/dbnewid.htm.
Khurram

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

Have a new computer with a different name. New computer does not reconize the ipod classic device?

Have a new computer with a different name. New computer does not recognize the ipod classic device? How can I remody this problem

Add '''DOZEN''S''''' of giggs of ram, switch from hard disk to SSD or add inline SSC.
Consult some free experts about potential malware infestation: BleepingComputer.com
In windows control panel is an option to rate performance of your computer. What number does the applet rate your computer?
http://windows.microsoft.com/en-US/windows7/What-is-the-Windows-Experience-Index

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Is MSI P35 Neo compatible with new USB3 PCI-E adapters?

I've just bought a 1 Tb Samsung USB3 powered external HDD. Currently I only have USB2 ports which can't handle the transfer speed of USB3. Is my MSI P35 Neo mainboard compatible with new USB3 PCI-E adapters, if I were to fit one?
Thanks in advance
Pedro

If it is an add-on card, it should work if the drivers are properly installed.
However, if you need more information on compatibility results, I suggest that you log a technical support ticket with MSI.
>>How to contact MSI.<<

Impedance of BNC 2110 with PCI 6713

Dear NI Engineers
I'm using the Counter/Timer input channel of BNC2110 terminal block with PCI-6713 board to generate waveform according to the external TTL signal.
By the way, I want to know the impedance gain of Counter/Timer input channel of BNC2110 with PCI-6713.
I'm looking forward to getting the answer.
Thank you.

On connector 0:
EXTREF -> Not connected
CTR0 OUT -> PFI12
FREQOUT -> PFI14
AI HOLD COMP -> PFI11
EXTSTRB -> PFI10
CTR1 OUT -> PFI13
Rest should be as lebeled
On connector 1:
ACHX -> ACHX+8
EXTREF -> Not connected
CTR0 OUT -> digital P0.28
CTR1 OUT -> digital P0.29
PFI0 -> digital P0.16
EXTSTRB -> digital P0.26
FREQOUT -> digital P0.30
SCANCLK -> digital P0.23
This list may not be complete
For details compare the connector of an E-Series device with the connector of an M-Series device:
M-Series Help
http://digital.ni.com/manuals.nsf/websearch/9477D6DF1FE5A72986256FAB00633DE4
E-Series Help
http://digital.ni.com/manuals.nsf/websearch/05A25C65C755D8DB86256FD30081687DMessage Edited by Peter Schlosser on 04-26-2005 06:32 PM
Message Edited by Peter Schlosser on 04-26-2005 06:32 PM
Peter Griese
NI

Anybody using MOTU PCI 424e card for 2408 with new MacPro Cylinder?

I upgraded my older Mac PRO tower which accepted multiple PCI 424e cards for the new Mac Pro cylinder. I purchased from Magma their Express card cage with Thunderbold output in anticipation. Computer arrived and I removed the card and inserted into the card cage, directed audio to the card but no go. iTunes, for example freezes when the card is selected. My MOTU Digital Performer also does not allow Analog in or out with the card.
I have contacted MOTU, they do not have a solution. Magma, the card cage manufacturer has not come back with a solution. Apple suggested visiting these forums for possible ideas.
My studio is dead in the water until I solve this OR I need to go back to the slower old MacPro.
Thanks in advance.

Did you install the FCS suite onto the new computer by using the original disks?
You should. Don't forget to run all updates, repair permissions and restart.
Or did you migrate the applications from the older Mac? You should not do this.
http://discussions.apple.com/thread.jspa?threadID=2113535

How can I recognize my Iphone 5 with new itunes software? Its not syncing even with different apple devices?

I need help syncing my iphone 5 with new Itunes software. It wont recognize my phone under the files tab and selecting devices they are greyed out as if it doesnt recognize the device

this worked for me.
PLUG your iPhone to PC and go here on your PC...Control Panel\Hardware and Sound\Devices and Printers. under unspecified you will see apple iPhone......right click on it and remove device. unplug your iPhone and replug it to your pc and iTunes should open and will see your phone.

Programming Labview for pulsing from PCI-6713

Hello anyone
I am new to Labview and programming NI cards. I currently have a PCI-6713 card. I would like to program this card to generate pulses from 3 output channels from the card. I would like to be able to program the shape, width and time delays of the pulses. Is there an example VI code that I can use to help me with starting on this task? I cannot seem to find any example VIs in the Labview 7.1 software I have on the computer for this purpose.
Hope to hear from you soon.

Hi magnushsu,
I wasn't able to find any examples specific to generating an arbitrary waveform, but I did find one that reads waveform data from a file. This example uses a function generator to create the file, and then reads the data from the text file to generate the waveform. You will have to modify the text file point-by-point to create an arbitrary waveform. The example can be found in the NI Example Finder by selecting "Examples" from the pulldown menu next to "Open" on the splash screen. Search for "Hardware Input and Output >> DAQmx >> Analog Generation >> Voltage >> Gen Mult Volt Updates-Text File Source.vi
I hope this info helps,
Michael Chaney
Systems Engineer - TestStand
National Instruments

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

WiFi no longer working with new Time Capsule-can you help please?

Hi all,
Just received my new Time Capsule (TC). It was a little problematic setting up, but probably due to my now choosing to increase my security from WEP to WPA as the TC set-up assistant suggests. Since then, I have had numerous problems getting my other computers and now my iPhone to connect with WiFi.
The problem is that despite entering all the new settings and WPA passwords for my connection with the TC, the iPhone will either momentarily recognize and go to wifi or simply stay on Edge.
On the former, with wifi active, as soon as I go to iTunes, Safari or check email, it reverts to Edge. On the latter, despite resetting, entering password, or tapping Settings and selecting my wifi connection, it will NOT connect and stays on Edge.
(Now, I'm on Edge! I'm bummed that with new hardware I have new problems that didn't exist before!)
Can someone who had this same problem tell me how they resolved it.
Here's the one clue I have, but would rather not resort to: When I first set up the TC, I had it on WEP with a WDS Network, and everything was working great and FAST! Now that I have increased the security—I will be backing up 3 computers to the TC—my iPhone and other computers seem to have intermittent or no wifi connection as a result.)

Irving Gonzales,
If your computers are 802.11N capable, you might want to try an advanced setup that might help your Time Machine speeds some. I have not personally tested it, so it is just a personal theory at this point.
First, in a mixed environment the 802.11N clients all get slowed down.
First, configure the TC for 802.11N only.
Second, connect the Airport Express via ethernet to the Time Capsule
Third, configure the Airport Express for bridged mode (doesn't give out IP addresses), and for its own wireless network with a different name than the Time Capsule.
Have any 802.11b/g clients like the iPhone join the Airport Express' network.
Thank you,
Nathan C.

Not able to color different rows with different colors in a column of table

Hi,
I am trying to to display different rows with different colors in a column of the table based on some decode condition.
I have gone through the following threads :
Can we colour the rows in the column of a table
Changing Color of a value in a column
This is what i have done :
1.Added the following code to custom.xss(changed the name to Custom.xss as suggested in one of the above threads) --- in path ---- jdev\myhtml\OA_HTML\cabo\styles
<style selector=".1">
<includeStyle name="DefaultFontFamily"/>
<property name="font-size">11pt</property>
<property name="font-weight">Bolder</property>
<property name="color">#008000</property>
<property name="text-indent">3px</property>
</style>
<style selector=".2">
<includeStyle name="DefaultFontFamily"/>
<property name="font-size">11pt</property>
<property name="font-weight">Bolder</property>
<property name="color">#FFFF00</property>
<property name="text-indent">3px</property>
</style>
2. Sql query of the VO is :
select comments,role ,decode(role,'REQUESTER','1','2') Colorattr from xxat_sars_action_history where request_id = :1 and event_name = :2 and action_code <> 'PENDING'
order by sequence_num desc
3. Coded the following in the process request of the controller:
OATableBean table = (OATableBean)webBean.findIndexedChildRecursive("CommentsTB");
OAMessageStyledTextBean roleBN = (OAMessageStyledTextBean)webBean.findIndexedChildRecursive("role");
OADataBoundValueViewObject cssjob = new OADataBoundValueViewObject(roleBN,"Colorattr");
roleBN.setAttributeValue(oracle.cabo.ui.UIConstants.STYLE_CLASS_ATTR, cssjob);
where 1 and 2 form the colors ( i have even tried with 'Red' and 'Yellow'...as it was not working replaced with 1 and 2)
4.The query returns data fine with corresponding 1 and 2 values.
But different colors are not getting reflecting on to the UI.
I am testing this on my local jdev.
Please do let me know if i am missing something.
Thanks ,
Sushma.

Any Clues please.....
Thanks,
Sushma.

PCI-6713 different updaterate with new driverversion

Similar Messages

Maybe you are looking for