PCI 7344 board won't tune after upgrade to Win 7

Was forced to upgrade 2 machines with these cards to Windows 7 32 bit.
Using NIMotion 8.30 and have upgraded firmware cause it said I had to.
2 axis are working correctly but the main one running 500 rpm when I stop it by breaking light curtain it stops but rocks a bit. They say this is unacceptable. It was working correctly before upgrade so I am wondering if perhaps it was firmware related?
These are the values I'm loading with software each time it starts up
"pidvalues(0).kp",65
"pidvalues(0).ki",5
"pidvalues(0).ilim",100
"pidvalues(0).kd",1200
"pidvalues(0).td",5
"pidvalues(0).kv",0
"pidvalues(0).aff",0
"pidvalues(0).vff",0

Perhaps should have been a little more specific.
This is a VB 6 app originally done on NI-Motion 5.2 back around 2002 and running on Windows 2000.
The light curtain input I am referring to is tied to the Forward Limit axis 1.
This used to stop the motion really quick and smooth. The best I can get it tuned is the above parameters but it gets a little kickback motion when it stops. I've been from 1 extreme to the other with those parameters. Light curtain is far enough where they cannot reach the motion before it has completely stopped so it is safe but I would like to get it better because we are wrapping wire around something with this.
Way we done in past was to tune with NI MAX and then added those values to the file but it didn't work very well on Win 7. Was thinking maybe I should just initialize then load my values from file?
I was looking into downgrade/upgrade firmware see if that helps. Going through the .bas modules comparing them right now and make sure they don't break something in rest of code.

Similar Messages

  • Ultranav won't install after upgrade to Win 7

    I upgraded from XP to Win 7 Ultimate. When I try to install the Win 7-compliant driver from the Lenovo site, the OS tells me that it's not compliant and "fixes" the problem by installing generic drivers that, of course, don't allow me to modify the Ultranav settings. Any thoughts?

    Hi PMS,
    Please link to the driver file you tried to install and the name your system also. More information is always handy.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Iphoto 8.1.2 won't open after upgrade to 10.8.2?

    iphoto 8.1.2 won't open after upgrade to 10.8.2.  I have tried to upgrade iphoto to 9.1 but it won't work.

    To upgrade to iPhoto '11 (version 9.x.x) you musdt purchase the upgrade in the App store - that is not a free update.
    what happens? What error messages do you get? if it crashes post the first 50 lines of the crash report
    LN

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • Itunes won't work after upgrading to Mac os x 10.7

    How can i fix itunes, it won't open after upgrading to Mac OX lion??

    Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
    Crashed Thread: 7
    Thread 7 crashed with X86 Thread State (32-bit):
    eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
    edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
    ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
    cr2: 0x00000044
    Will attempt your suggestion.

  • Old emails won't load after upgrade to Mountain Lion

    old emails won't load after upgrade to Mountain Lion

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

  • ICloud email won't work after upgrade

    iCloud email won't work after upgrade to Mountain Lion.  Says pop 3 server is timing out. Solutions?

    I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
    My problem is TWO FOLD.
    The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
    Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
    There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

  • CPU-Usage during control of a DC Motor with the PCI-7344 board?

    Hello!
    I want do control a DC-motor (no stepper motor). Now i´m using the PCI-6527 board and simulating the delay between "high" and "low" on the Simulate-signal-vi. This works fine while no other process on the PC is running. The CPU-usage rises up to 100%. Is it possible to use the PCI-7344 board for controlling my DC-motor and having enough CPU resources to do other things like capturing pictures with a cam at the same time? The CPU is a Pentium 3 1Ghz.

    The PCI-7344 is a perfect solution for your problem. This board is designed for motion control applications and it's running everything on its own DSP and CPU:
    Trajectory Generation, PID control, limit switch monitoring and so on.
    Thus the PC's CPU is free for other tasks. Please note that you need a position feedback signal from a quadrature encoder.
    Best regards,
    Jochen Klier
    National Instruments Germany

  • After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

    After upgrading from Win 8 to 8.1 my  DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

    Hey hvbnfrgvn,
    Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
    I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
    If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
    I hope this information helps, please keep me posted on how it goes.
    Best of luck and have a great day!
    I worked on behalf of HP.

  • System recovery fails after upgrade to Win 8.1 on Satellite L75D-A7283

    My elderly uncle forgot the password to his Win 8 user account sometime after upgrading to Win 8.1. He was the administrator, we haven't been able to get Microsoft to reset the account, so I thought to roll back the computer to its factory installation of Win 8.
    However, when I try to do that, I get as far as the Reset your PC screen and find that the only target OS is Win 8.1, not the original Win 8. Ok, I accept that. But after choosing to restore Win 8.1, it says "Unable to reset your PC. A required drive partition is missing."
    I have examined the disk by removing it and attaching it to another computer and find that both the original Win 8 recovery partition and the new Win 8.1 GPT recovery partition are both there. They just don't seem to be accessible.
    It seems that the Win 8.1 upgrade has made the original factory recovery partition inaccessible, which is not particularly helpful. We have no recovery disks to work from, so I think my only recourse is to try to get a Win 8 factory recovery disk from Toshiba, but I wondered if anyone else has a suggestion? Thanks.

    Satellite L75D-A7283
    It's my understanding the upgrade does not modify any other partitions while upgrading Windows itself. Seems likely something else is wrong.
    If you did not create recovery media before and cannot do so now, then obtain it from Toshiba. Scroll down to Get Recovery Media here.
    All the information in the section Recovering the Internal Storage Drive, which begins on p. 53 of the User's Guide, should still be applicable.
       Satellite/Satellite Pro L40/L50/L70/S40/S50/S70 - A Series User’s Guide
    -Jerry

  • After upgrade to Win 8, the key's has changed

    After upgrade to Win 8, the key's has changed, for example, when i am trying type @ but the key has changed as ". so please help me to rectify the problem.

    Hi,
    What was the keyboard language BEFORE and what it is NOW ? Did you use SAME KB language for both Windows 7 and Windows 8 ? When click to the KB (bottom right corner) what do you see ? This is mine:
    Please use instructions from the following link to fix:
       http://windows.microsoft.com/en-AU/windows-vista/C​hange-your-keyboard-layout
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate

    HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate
    what can I do?

    Uninstall the current audio driver and install it again.
    other option is trying driver from microsoft update.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • Icloud stopped after upgrading to win 8

    icloud stopped working after upgrading to win 8.
    Says "map cannot be found".
    Any suggestions? Or will it simply not work with Win 8?

    Solved.
    Needed upgrade to 2.1

  • IPhone won't sync after upgrading to Leopard

    My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
    I've tried everything apple suggests:
    1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
    2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
    3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
    4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
    5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

    You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
    http://docs.info.apple.com/article.html?artnum=306637

  • IPhoto Library won't open after upgrade to mountain lion

    One of my iPhoto libraries (stored on a WD Pasport Studio) won't open properly after upgrade to Mountain Lion 4oo5 open ok. One opens but disc symbol keeps spinning and Iphoto stops responding. Any ideas?

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

Maybe you are looking for

  • Deploying CMP entity bean throws compilation error.

    Jdeveloper build works fine but the server deployment ( embedded) fails. I linked tools.jar to j2ee home dir, same version as jdev uses. Session beans deploy OK. The table corr to the entity bean has a primary key and the entity bean was created by d

  • Does Apple TV work with Sony Grand WEGA TV

    I have a Sony Grand WEGA KDF42WE655 TV and would like to purchase Apple TV, but want to make sure it works with the TV first.  Does anyone have a TV like this and does Apple TV connect to it?  Thank you.

  • TS1702 iBooks crashes after launch -- have latest version

    what causes iBooks to crash after launch?

  • Need Info re Music Menu and Upgrade

    Figures - I'm out of town today and can't look at the upgrade. Can someone tell me about the music library functionality. Is there a search feature? Is there a compilations function? Is there an add to queue? How's the airtunes function - PC to ATV o

  • Checksum error when not displaying [row selector]

    Hi ! In my tabular form, I need no row selector, so I unchecked the check box "Show" on the "Report Attributes" page. But this leads to a checksum-error when updating a record and pressing "Submit". What's the reason and why does it happen ? Heinz