PCI Card & 4 bay enclosure not showing up on MacPro
I have a pre-09 MacPro and a WiebeTech RTX400H-SV bay enclosure which connects via eSata. Before today I had no problem using drives in any of the 4 bays. But today I started it up and it wouldn't come on the desktop. I checked for it ref Drive Utility in case it just needed to be mounted, and it didn't show up [I had 2 drives in the enclosure just in case]. Then I checked the System Info and it says that I have a PCI card in Slot 3 [it's a 2 slot eSata card] and it says "pci1095,3132 OtherMass Storage Controller PCI Slot3" and driver not installed. I don't even recall where I got the PCI card - do I need the PCI card driver or the RTX driver and if the first, how do I know where to get the right drive? I don't know why it's not on the computer = if it is somewhere what would it be called or what extension would it have and where would it go???
Your answer prompted me to not only check your link but see if I had any records or information around here ref. what the card was. Fortunately, I saved the box and it's a Tempo Sata E2P card from Sonnet. I went to its site and was able to find a driver, downloaded and installed it and voila, the disks in the enclosure appear on the desktop.
Thanks so much for the lead!!!
Similar Messages
-
Memory card in Nokia 7373 not showing
I have had a memory card in my nokia 7373 for some time and all has been fine. However, recently my daughter had the phone and someone pinched the sim card and it was dropped on the floor. Now no memory cards will work in the phone. I have put it in the pc and all the ringtones etc are still there, i have even bought a brand new memory card but it just will not show up at all.
Can anyone help at all????
CheersIf no cards will work then the phone must have been damaged when it was dropped.
A nokia care point may be able to help you.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
Arrgh! (installed Airport card G4867... not showing up!)
i installed an airport card (salvaged from my powerbook g3) into my desktop G4867. every now and then (more so every time i boot up), the airport card isn't recognized by the computer.
what gives?
i've repaired disk permissions, reset pram, opened the machine up to make sure the connections are solid, etc.
"help!"
-I'd get them to send you another card. If it works, great! If not, then the connection on the computer is bad. If that's the case, you can get a wireless PCI card or a wireless USB adapter, but the PCI card would be better. Test it with another Airport card first though.
-
I redeemed a gift card and it is not showing up on my account
I recently redeemed an itunes gc on my Ipad and it is not showing up and my cc is continues to be charged for purchases. It will not let me redeem again. Any ideas?
Try the appropriate topic of:
Apple - Support - iTunes
Including this one:
How to report an issue with Your iTunes Store purchase -
[SOLVED]External drive (SATA in enclosure) not showing up (USB)
I have had my drive working for ages, but recently it has stopped showing up in fdisk -l. dmesg shows some detection but I think it's something to do with systemd, which I switched over to recently coinciding with this.
dmesg on plugging drive in:
[393067.614072] usb 2-2: new high-speed USB device number 5 using ehci_hcd
[393412.238224] usb 2-2: USB disconnect, device number 5
[393428.780693] usb 1-6: new high-speed USB device number 10 using ehci_hcd
Also systemctl output:
└─> systemctl
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:1c.5-0000:02:00.0-net-eth0.device loaded active plugged 88E8056 PCI-E Gigabit Ethernet Controller
sys-devices-pci0000:00-0000:00:1e.0-0000:05:01.0-sound-card0.device loaded active plugged VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda1.device loaded active plugged OCZ-VERTEX4
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda2.device loaded active plugged OCZ-VERTEX4
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda3.device loaded active plugged OCZ-VERTEX4
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda5.device loaded active plugged OCZ-VERTEX4
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda6.device loaded active plugged OCZ-VERTEX4
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda-sda7.device loaded active plugged OCZ-VERTEX4
sys-devices-pci0000:00-0000:00:1f.2-ata4-host3-target3:0:0-3:0:0:0-block-sda.device loaded active plugged OCZ-VERTEX4
sys-devices-pci0000:00-0000:00:1f.2-ata5-host4-target4:0:0-4:0:0:0-block-sdb-sdb1.device loaded active plugged ST32000641AS
sys-devices-pci0000:00-0000:00:1f.2-ata5-host4-target4:0:0-4:0:0:0-block-sdb.device loaded active plugged ST32000641AS
sys-devices-pci0000:00-0000:00:1f.2-ata6-host5-target5:0:0-5:0:0:0-block-sdc-sdc1.device loaded active plugged SAMSUNG_HD154UI
sys-devices-pci0000:00-0000:00:1f.2-ata6-host5-target5:0:0-5:0:0:0-block-sdc.device loaded active plugged SAMSUNG_HD154UI
sys-devices-pci0000:00-0000:00:1f.2-ata7-host6-target6:0:0-6:0:0:0-block-sr0.device loaded active plugged PIONEER_DVD-RW_DVR-212D
sys-devices-pci0000:00-0000:00:1f.2-ata8-host7-target7:0:0-7:0:0:0-block-sdd-sdd1.device loaded active plugged WDC_WD1001FALS-00J7B0
sys-devices-pci0000:00-0000:00:1f.2-ata8-host7-target7:0:0-7:0:0:0-block-sdd.device loaded active plugged WDC_WD1001FALS-00J7B0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-pnp0-00:09-tty-ttyS0.device loaded active plugged /sys/devices/pnp0/00:09/tty/ttyS0
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-net-devices-eth0.device loaded active plugged 88E8056 PCI-E Gigabit Ethernet Controller
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
media-newpics.mount loaded active mounted /media/newpics
media-stuff.mount loaded active mounted /media/stuff
media-video.mount loaded active mounted /media/video
media-win7.mount loaded active mounted /media/win7
proc-sys-fs-binfmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
cups.path loaded active running CUPS Printer Service Spool
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
avahi-daemon.service loaded active running Avahi mDNS/DNS-SD Stack
colord.service loaded active running Manage, Install and Generate Color Profiles
console-kit-daemon.service loaded active running Console Manager
console-kit-log-system-start.service loaded active exited Console System Startup Logging
cronie.service loaded active running Periodic Command Scheduler
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
[email protected] loaded active running Getty on tty2
lm_sensors.service loaded active exited Initialize hardware monitoring sensors
mysqld.service loaded active running MySQL Server
network.service loaded active running LEGACY unit for "network" rc script
nmbd.service loaded active running Samba NetBIOS name server
ntpd.service loaded active running Network Time Service
polkit.service loaded active running Authorization Manager
rc-local.service loaded active exited /etc/rc.local Compatibility
sickbeard.service loaded active running SickBeard Daemon
smbd.service loaded active running Samba SMB/CIFS server
sshd.service loaded active running OpenSSH Daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded failed failed Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
timidity.service loaded active running TiMidity++ Daemon
udisks.service loaded active running UDisks
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
avahi-daemon.socket loaded active listening Avahi mDNS/DNS-SD Stack Activation Socket
cups.socket loaded active running CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda5.swap loaded active active /dev/sda5
arch-daemons.target loaded active active Arch Daemons
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
95 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Drive has always been NTFS and no issues, so not sure what's going on. I also just plugged it into my Win 7 laptop and it was detected and I'm reading/writing to it. Appreciate any help!
Edit: I also used it just fine in my Win7 dual boot on same computer.
Last edited by colbert (2012-12-03 19:57:31)Yeah it is working now, it may have been a reboot Thanks!
-
Contact card in mac messages not showing picture
One of my contacts in Messages on Yosemite just shows the initials instead of their contact picture.
When I click on the name in the right pane in Messages, I can select "Show Contact Card".
The Contact Card also shows the initials in place of the contact image.
In the contact card, I click Open With Contacts.
The Contacts app opens and shows me the user's address book card, which shows the contact has a picture assigned.
The user in Messages is referred to by their email address *****@aol.com.
The email address and phone number for this user do not have duplicate entries in my contacts.
Other users do not have this issue.The user had more than one instance of the same email. Apparently that confused Messages. When I removed one of them, the image showed just fine as expected.
-
SD card content video does not show in finder
Last week I installed Mavericks - after some troubles with mail and excellent support from Apple Helpdesk which in the end made it possible to retrieve all old mails... I encountered another bug today.
I inserted my SD card to transfer therapy session files to the computer. However: the AVCHD map is not recognized as such: finder and the info on the disk shows me that the card is in use, no spare space, but I can not access the map with video files. AVCHD is there but not accessible... In the end my husband got them off by using terminal and some command lines, but I'd really ike this to show up as map and as files.
Any ideas on how to solve this?
Thanks!There is a setting that allows you to drag only audio, only video or both. I am away from my mac rignt now but I think it is in the Edit
Menu -
For some reason lately, my USB mounts, but doesn't show up in the Finder left-hand area with the other removable media, such as DVDs. I have to access it via My Computer, where it does show up. And I have to eject it in Disk Utility.
It does show up normally in iPhoto.
Any idea why this might happen?
Thanks,
dougWelcome! ...I would try Apple's 'Troubleshooting Assistant' first : )
http://www.apple.com/support/ipod/five_rs/ -
TS1292 My iTunes card I entered is not showing up on my balance
Please help me with my I tunes account my new balance is not showing
ashcole06 wrote:
... What do I need to do??
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
some of your pictures & words are missing on this page as well as the games I play. So I don't know if I putting my questions in the right area. How do I fix this ? Tired of guessing !
Ok..
Launch iTunes. From the menu bar top of your screen click Store / Authorize This Computer.
iTunes seems to have created an identical account
No... Apple does not "create" an account for you.
I've had my iPod for somewhere around six years, and have amassed a lot of music during that time and gone through a couple computers
You've purchased iTunes media all this time and never backed it up? -
New ram not showing up in MacPro 1,1
I bought new ram for an old MacPro 1,1 and only the old ram shows up. I know the new ram works as I can start my computer with each individual stick but they wont work together. Any idea? I can move my old 512chips to any slot and it works so I’ve ruled out bad slots. The new ram chips work but only one shows up. I have switched them out too and both work so Ihave know idea what’s going on. Hope someone can help.
Thanks in advance.Brand A and B not working together or even same but from different batches, can happen.
Each SET will work fine, you can't do "individually".
I've seen people use A1:B1 and A3:B3 which is not supported, yet has worked.
Or all RAM on top Riser.
As far as I know the Risers are interchangeable, there is no "A" and "B" other than "top" and "bottom" and some have had to do an advance exchange and get a new Riser sent out under AppleCare.
Get out your OEM 10.4.7 discs and one of them has Apple Hardware Test, use "command-D" with the DVD in the tray.
No, you don't need a battery.
It just sounds like a defective set. You bought OWC, Crucial, Kingston, Mac Pro certified (and large RAM heatsinks) then just contact seller and have them send them back as DOA. -
MAX does not show scanner card
I'm using an Allen-Bradley 1784-PCDIS PCI scanner card, and it does not show up in MAX. I've un-installed the card, un-installed NI-DNET 1.41, then re-installed NI-DNET, installed the scanner card, and it still doesn't show up. The card does communicate if I use A-B's RSNetworx or IOLinx, but if I try any LabView VI's, I have no luck. Any ideas or suggestions?
I'm running Windows XP Professional with LabView 6.1.
Additional note - the same PC has a NetMos dual RS-232 card installed, which also doesn't show up in MAX, but it works perfectly with any VI that I test it with.Hi knorcross
The NI-DNET software supports only National Instruments DNET (and with restrictions CAN) hardware products. DeviceNet products from other vendors are not supported (and thus, they won't show up in MAX). For information or device driver software, please refer to the documentation you received with your Allen-Bradley 1784-PCIDS scanner card.
-B2k -
Airport card not showing up after new Security Update
Just did the new Security Update and lost all internet with my Tibook. Getting message that no Airport card is installed. Not showing up in the System Profiler. Update has apparently killed my Airport card. Any solutions?
Message was edited by: Michael SastreI know that fella User — he's always messing things up! I'm glad you got the better of him this time.
-
N85 pictures not showing up in gallery
The pictures that I take on my N85 are not showing up in the photo gallery. Using the file manager, I can see that they are being saved to my memory card, but they do not show up in Photos. Really annoying.
-Benim having a nokia n95 nd i faced same prob as u did..... when i open my gallery it shown the message that [no images or videos]..i found a solution..for that.the steps r below..
1-press remove memory card
2-than remove memory card from phone
3-switch off ur phone
4-switch on ur phone
5-put in memory card
6-wait 20-25 secs as phone will load memory card
7-open menu now nd see if ur phone have loaded the memory card
8-open gallery ,
u can see everything there back now
so enjoy................
so guyz who found my post useful can thank me for that here or on my email ...[email protected] or add me on yahoo messenger [email protected] i will be happy to know it.
thank u
shaunkiz -
Help!
Have had a great deal of success with Toshiba however would like to use it in wireless mode. Have LAN mini PCI card switch yet can not find drivers on computer to enable it.
Any suggestions
Many thanks
SteveHi Steve
I'd say that it is likely that You do not have a built in WireLess mini PCI card then. Normally all devices are configured 100% when the machine comes from factory.
And even if the driver is missing You should have a device that was not configured in the device manager and You do not say anything about such a device so I guess there is none.
It is quite common that models are prepared for wireless LAN (like your possibly is) with a WiFi-switch and built in antennas.
best regards
Tom
Maybe you are looking for
-
How do I open a Crystal Report from Microsoft Access?
I'm looking for step-by-step instructions on how to launch a Crystal Report from a Microsoft Access application (for a dummy like me). My Crystal Report uses a connection to the Access database as the data. I have Microsoft Access 2002 with Microsoft
-
BPM scenario-configuration (Ref-FAQs)
Hi All, I'm working on the following scenario related to BPM. /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit Designed: Message Interfaces FileDetails_sync_AI FileRequest_AI FileRequest_OB_MI FileResponse_AI FileResponse_IB_MI
-
We are running Tidal 6.0 and my company did not purchase the transporter. Can anyone tell me how much this is as an add-on?
-
Finally I made a decision I removed all Adobe products from my PC. Also this page not work with Opera browser correctly I need to write ... for tube heh. I cannot change row ... Anyway Flash plugin not work with Opera ... it cannot install so that Op
-
Hello, I wanted to know if there is an easy way to change port 443 to port 8443 for the default web service ? Thanks