PCI Card Conflicts w/ K7N2 Delta-L

I am trying to set up my system with a Radeon 7000 PCI video card (yeah, yeah, I know, I'll be getting an AGP in the near future). By itself it works great, but when I install my wireless ethernet card (D-Link 520+ specifically), the video card ceases to send any kind of signal. I've tried a number of different configurations for the slots, but nothing seems to work. Is there anything I can do, or will I be forced to get the AGP card now?

disable any thing you dont use in way of features in the bios,com ports any thing to free up irq

Similar Messages

Msi 845 Pro2 LE PCI cards conflict

My board show no display when boot up after 1 year in operation.
it seem that there's conflict between my Creative sound card & NIC card,
could only install either 1 of the cards, if 2 cards
there would be no display although MB is running.
Is it IRQ conflict?
why only 1 year after operation than it occur?
Could any one help me plz...
WinXP pro
256mb SDRAM x 3pcs
GF4 MX440
Creative live5.1
1.8Ghz cpu
40GB Maxtor HDD

GeoMAN,
Showing no diaplay may be due to accidental knock on your VGA Card and caused the card to shift out of the slot a bit, try pressing down your VGA Card back to the slot and test again, but if you still suspect conflicts, you'll have to list us your IRQs settings.
All the Best... :D!!!

Integrated Network card problem with K7N2 Delta-L

my integrated network card doesn't recognize any RJ45 cable bluged to it !!!
"ofcourse i enabled it from Bios"
the card is identefied by windows normally as nVidia ethernet ......
i tried to change the version of nForce driver but no way.
i pluged a normal PCI network card and work well with the LAN ... unpluged & re connect the integrated one with same cable but no way .. the task bar icon told me that A CABLE IS UNPLUGED >>
plz help

hi
what do you tru to connect it to?
i cant use onboard lan with my cable modem but a friends router worked without trouble.
btw welcome to this forum
bye

K7N2 DELTA ILSR has conflicted with ram....

K7N2 DELTA ILSR has conflicted with this ram....
http://www.kingmax.com/product/pro_superMPXB62D-383.htm
I got 2 * 256MB DDR 400 of the above ram.
Is there any conflicted with K7N2 DELTA??
amd 2500+
thank you
BIOS version 7.4

Quote
Originally posted by utada
I have already brought kingmax
These boards are very picky with RAM. As Bonz has pointed out their is an approved list near the top of the Forum but unfortunately I don't beleive Kingmax is on it. Sometimes the generic RAMS run, sometimes not. It seems to be hit or miss. If you want a recommendation of good quality RAM I would suggest MUSHKIN first and CORSAIR second. Good Luck
Rob

K7N2 Delta NIC problem

I have noticed a problem on my machine lately, when i use the onboard NIC the cpu usage jumps from 0 to 60 back and forth and the system is unusable, when I use a 3com PCI NIC instead it works fine, anyone have any idea what the problem can be, I think I have the newest drivers and bios, but that shouldn't matter because it worked fine with the versions that I have earlier. Any help is appreciated.
System Specs:
MSI K7N2 Delta ILSR Mobo
AMD Athlon XP 1900+ CPU
1 Gig Crucial PC 2100 Ram
Liteon DVDRW 411S
ZIP 100 Inernal
WD 100 and 75 Gig HD's
Floppy
ATI 9600 PRO AGP Video Card

i have the k7n2 delta mobo and i use the onboard nic for over an year a half and here are the setting i made:
first of all, install the nforce 5.10 drivers which contains the new drivers for the onboard nic. later, u go to setting and make it work for 10mbps full duplex , optimize it for cpu and disable wake on lan.
i hope it can help you man.

K7N2 Delta has jibbery and garbled Video

I just purchased the FX Nvidia XT TD256 video card with the K7N2 Delta ILSR Ultra and after jumpering it to safe mode jumpers 10 and 11 i think, and clearing cmos, the screen works fine, then I restart machine, sometimes without going into bios, and video is jittery and garbled lettering. I can't get the machine to boot into windows, or even be stable enough to load windows, What could be the problem? I just purchased both of these this week, I am also using the AthlonXP 2600+ cpu, and Generic memory with TT Performance 1gig 2700, PSU 28a@+3.3v. 30a@+5v, 34a@+12v Aspire 500W, WD 80g, WD 120g, and on I/O card WD 250g HDD's. This problem occurs with every reboot, no matter what setting are in bios.
Any suggestions?
Thanks,
urme9696

The nforce 2 chipset is fine, dont think thats the problem because Ive built machines with the same type board and video card without any problems at all. Do you have a different video card to try in the K7N2?? Also check and see what the BIOS version is - It might need to be updated. Maybe try a differnt stick of ram if possible. A little more info on the card if possible. its a FX5200 I think, but whats the brand?? Does it have a plug ( Molex or floppy type) for extra power on the card??
One other thing to check, Make sure you dont have an extra stand offs on the motherboard. Some boards take more than the 6 that that the K7n2 do. If so this may be trying to short something out.

MSI K7N2 Delta ILSR (MS 6570) trouble With ATA card

Hi, i have major trubble.
Ihave two 300gb, two 120gb and two 80gb harddrives + 1 DVD burner and 1 CD burner with ultra DMA 100 PCI card and it works fine without using the sata or ide3 raid function. I purchased an new PCI ATA 133 card and the system won't boot. I have tried for an long time to get the raid function to work but wihtout results with my old ATA 100 card (it works when i unplugg the ide cable from ide3).
Is there anybody that knows with type off PCI ATA 133 card that works or how too coop whith this problem.
I've got the latest bios ver. 7.8 but no difference
AMD XP2800+
Kingston 2x512mb
ATI Saphire Radeon 9600pro 256mb
Soundblaster Live Value
XP pro sp2
MSI K7N2 Delta ILSR (MS 6570)

I went to JME-Data and purchased an
True430
ATX 430 Watt Power Supply with PFC
For AMD™ and Intel® systems including
Pentium® 4
Dedicated output circuitry
Voltage feedback
Antec Low NoiseTechnology
AQ3 - Antec 3 year parts & labor warranty
True430 is a 430 Watt 6-output, dual fan-cooled ATX12V (Baby AT or PS/2 Size) power supply designed for personal computer or industrial applications.
Its ATX12V compliance allows its use with the latest Pentium 4 processors while its backward compatibility ensures its usability with any ATX-based AMD™or Intel® system
The prise 1099:-
And everything works great, Thank you very much for the tip. :-)
No more blue screen and it even works with my memory Kingston Value Ram 2x512 ddr400.
Is it possible to change the FSB from 166 to 200, and what should i think about before action. Like i said before i have an xp2800+
Alltså är det möjligt att få cpu gå på samma frekvens som minnena om man ökar FSB har några tip så är jag tacksam.
Att en nätdel kan göra så mycket helt otroligt TUSEN TACK för hjälpen till och med cpu tempen har sänkts från ca 56 till 46 grader fattar ingenting.

VGA at PCI 3, not in AGP, Why?? (K7N2 Delta - ILSR/5600VTDR

hi...
When i enter to see the properties of my VGA card adapter, it is in the "PCI 3"bus, why doesn´t it in AGP bus ??
i downloaded the "DMI info", the PCI 3 is "in use" and the AGP is "available".
Is there something wrong ??
my configuration is:
K7N2 Delta - ILSR
MSI GeForce FX5600VTDR 128Mb
512Mb DDR
Athlon 2.4 tb

Have gone into your bios and adjusted your chipset settings? If not you need to change a few things first of all your default settings for vga are set for PCI so you'll need to change that to AGP. Second your memory usage will need to get upped from 64 mb to 128mb. Next you'll want to enable 8x speed and fastwrites these will increase video quality.

K7N2 Delta-ILSR Agp conflicts

hi all
just regestard NEW BEE
just got k7n2 delta-ilsr
got all set up BUT, i had to use old graphics card to install Xp pro then put my primary graphics card in (phrophet 4500 64mb) in started up system and in devices of motherboard the pci to agp recources were all full up and dont work so the graphics card doesnt work, any ideas ??????
ps I'll have to get uptodate driver for graphics card.

Hi,
Killy your score's not bad at all! I'm more used to 3D Mark2001SE scores but yours seem very reasonable. I get about 1,600 on 3DMark03 and I run most recent (3D games) without problem (a little slowing down here and there) but your score is nearly 3 times mine! - Quite respectable!
Axel

Mode pci on my K7N2 Delta-L!??!?!

Hi, first i want to apologize for my english! :] I recently buy a K7N2 Delta-L board and in my display properties, my video card (MSI nvidia geforce 4 Ti4200 64MB AGP 4X) goes in "PCI MODE" !!! it should be at 4X. I got the latest driver DETONATOR 44.03 I tried AGP driver GART but my color goes crazy!?!?!
can someone help me? please!
thanks
[email protected]

if you dont load the nforce board drivers it will never run agpx4
get them from nvidia
if no luck there make sure psu is up to it
over 200 watts combined 3.3 and 5 v and 16a 12v

K7n2 delta, won't allow me to connect to the internet via pci modem

motherboard: K7n2 delta, nforce2 ultra
won't allow me to connect to the internet via pci modem
i have got 2 computers with same mobo, can connnect through external 56k
but the 2 internal 56ks (one in each computer), will not connect.
just dials then beeps, or no dialing tone.
the 2 internal ones are differnet makes, but connect through PCI
there must be something wrong with Mobo settings or pci stuff
all internet and modem settings are correct, etc etc etc
can u help
or does anyone have a pci 56k running on that mobo?

Quote
Originally posted by Solway
i made my creative one work and dial, using pulse dialing, but it takes ages
but my other one has no dialing tone, its werid.
If your not hearing dial tone you might have your phone plugged into the wrong port. Most modems have 2 outlets, one is labeled line ( that is the one you should have plugged into the jack (RJ11C). If that's correct, query the modem and see if it tests OK, you may have a defective modem.

K7N2 Delta Onboard Sound Disable Question

I have a K7N2 Delta motherboard with a MSI FX5600 256MB DDR video card. I am currently using the onboard audio. Ever since I first built this computer I have been having nearly every game I play on it lock up and freeze. I am thinking that it is a sound issue that is causing this problem, so I want to install a Creative Labs Sound Blaster Live. I have several questions that I hope someone can answer as I have exhausted all avenues and still don't have any answers. Here are my questions:
1. How do I disable the onboard sound? ie Which jumper is it and what are the
jumper settings?
2. Which PCI slot is recommended for installing the sound card so that I won't
any IRQ conflicts?
3. Is this actually an audio problem or is there something else wrong with this
motherboard or video card?
This is becoming very frustrating because when the computer locks up all I can do is just reset without shutting down. I'm becoming more and more worried that if this continues unabated I'm going to crash the hard drive and have to replace it only to have the problem persist. I hope someone can give me specific answers to my questions. Thank you in advance for your help.

First. Is it K7N2 Delta-L or Delta-ILSR (the one with an actual Soundstorm chip on it)? If you have the actual Soundstorm chip, use it! It will sound much better than an SBLive. Assuming you have the normal K7N2 Delta-L like I have:
1. To disable the onboard sound, first uninstall the drivers for it, then you need to go into the BIOS by holding the Delete key while you boot up. Then find the section "Integrated Peripherals" and in that section "Onboard Devices". Press Enter and find AC97 Audio and disable it. There are no jumpers.
2. PCI slots 1, 2 and 3 are usually not shared with other stuff like you AGP or USB ports. PCI Slot 3 is the ideal choice. 1 is usually covered by your video card fan anyway. For the SBLive, on Windows XP/2000, get the newest drivers from Creative Labs. The file is named "LiveDrvUni-Pack(ENG).exe" and it's file size is 23.3 MB (24,451,404 bytes). They have fixed the "nforce2 + gameport incompatibility".
3. The problem may be audio related...or not. Which drivers are/were you using for your onboard audio? nvidia or Realtek? Actual Soundstorm chip or crappy software codec? It could also be video card related. Fastwrites? 8x or 4x AGP?

USB2 devices not functioning to USB2 speeds on K7N2 Delta-L

Dear all,
Before i get the "Use search" button, i have and done it practically all day trying to find a solution.
My system: MSI K7N2 Delta-L, running on Windows XP service pack 2
4 USB ports at back panel, 2 USB ports on the D-Bracket (where there is a High Speed sticker on it)
All USB ports front or back "work" but not any allow me to use a USB2 enabled device to make it function at its designated speed.
An example is: Transfer of a 20MB file takes 25seconds... ludicrous for a newly bought Kingston 1GB USB2 complaint flash drive.
I have read the stickys, i am certain the USBOC is not connected by any wiring, the manual in K7N2 already stated that, my BIOS is at the latest version, my system is functioning correctly, no IRA conflicts by checking through device manager.
http://www.apxc57.dsl.pipex.com/Connections.JPG
This shows that the USB2 Kingston device does not get routed to the Enhanced host controller, i do not know why, please let me know if you know!
http://www.apxc57.dsl.pipex.com/Front%20USB%20unplugged.JPG
A better view...
Standard Enhanced PCI to USB host controller - I'm not as certain to understand what this means. Does it mean that my board ONLY supports the Enhanced USB IF i purchase a PCI card that has USB2 ports on it??? And it means that ALL 6 of my ports onboard (including the D-bracket) are all Open HCD..........
I honestly have searched everywhere and there is NO definitive solution to this problem i'm having yet, MUCH MUCH appreciated if anyone can give a guiding light.....please !!!
THANKS VERY MUCH IN ADVANCE...

Interesting update... here:
I've been thinking about what everyone said here, so i was questioning whether this Kingston USB2 device is really USB2 standards.
Please take a look at here: http://scan.co.uk/Products/ProductInfo.asp?WebProductID=245123
That is the actual product and where i got it from, please just take a quick nip at the specifications.."Super Hi-Speed 24MB/sec"
As you know, i have the MSI D-Bracket 2, the exact image is found here: http://www.modsynergy.com/Modsynergy%20files/MSI-5.jpg
You can see from that image, that it clearly displays a "High speed, certified USB" from the red/blue logo.
A description that distinguishes between "High speed, certified USB" from "Certified USB" can be found here: http://www.everythingusb.com/usb2/faq.htm
Near to the lower end of the page.
Now... interestingly i now notice the back cover of the USB2 Kingston drive in which it was concealed in, take a look here:
http://www.apxc57.dsl.pipex.com/KINGSTON.jpg
Cast your attention to the Red Circle i have done. It doesn't say High speed certified, it just says Certified USB.
SO, let me quote from "What are USB Hi-Speed and USB Basic Speed logos? These logos are part of USB Promoter Group?s branding program that ensures the quality of USB products. The USB 2.0 certified products would display a blue, white and red logo, bearing the words ?Certified? and ?Hi-Speed.? The classic USB 1.1 certified products would display a black and white logo with the words ?USB? and Certified.?"
If my USB2 kingston device is really USB2 and support the 24Mb/sec transfer rate, the box should in fact have a high speed logo not a black/white one correct???
Thanks for reading, i'll get in touch with the supplier i think... probaly RMA come saturday.

Problems with K7N2 Delta mobo

Hey I'm new here because of a problem I've had with the K7N2 Delta motherboard. I've done some research and I've noticed the problem appear to other users of this mobo as well. Before I bought this mobo I had a soundblaster live! value sound card and when I intalled this mobo I thought I wouldn't need my soundblaster soundcard so I stored it away. Well after a few months my pantience ran thin on this mobo's sound problems. For one, it keeps making this static like sound sometimes, so I tried to install my soundblaster sound card on the new mobo, I downloaded the lastest driver for it and changed my default sound driver to the soundblaster live! that I have but it made no sound at all. After removing the nvidia nForce 2 sound driver I had on my mobo to see if it would help I still had no luck in making my soundcard work. Is it possible that the soundcard is conflicting with the mobo's internal audial capability?

Hi,
Vampir, and welcome to the forum
Try putting your your soundcard in PCI slot 3.
Is it the -L version or the ILSR version motherboard you are using!
Read this the thread at the link below then repost!:
Nobby's Moan Guide
Btw, how many IRQ's do you have 16 or 23?
To find your list of IRQ's:
Go to Start>Run> Then Type: "msinfo32" (without quotes). The "System Information" window should now be open. Click on + "Hardware Resources" in left pane - then on IRQ's in the list that appears below it. You should now see a list of all IRQ's in the left panel! Which can be cut and pasted if you wish!
They can also be found in Device Manager!
Axel

K7N2 Delta IL-SR

OK Masters - I hope you can help me
I am not a techie but I have recently brought a K7N2 Delta IL-SR Mobo, using an AMD XP 2600 chip.
Everything is fine except when I play a game - The CPU usage goes to 100% and then it hangs.
The PC Alert 4 says CPU temp is 47 degrees c. The strange thing is I played this game for a couple of weeks before I started to have these problems. I have updated the Bios using the LIVE Update on the MSI web page.
I have a Geforce4 Mx 440 Graphics Card, 120 GB Hard Disk, 512 MB Ram and running XP Pro.
Whats up with this thing? I ran the same game on an old PIII 750 without any problems.
All help appreciated.
Juniper

DeathStalker,
Here is the list you asked for Chief:
Interrupt Request (IRQ)
(ISA) 0 System Timer
(ISA) 1 Standard Keyboard
(ISA) 3 COM 2
(ISA) 4 COM 1
(ISA) 6 Standard Floppy Disk Controller
(ISA) 8 System CMOS/real time Clock
(ISA) 9 Microsoft ACPI- Compliant System
(ISA) 12 PS/2 Compatible Mouse
(ISA) 13 Numeric Data Processor
(ISA) 14 Primary IDE Channel
(ISA) 15 Secondary IDE Channel
(PCI) 11 NVIDIA nForce PCI System Management
?(PCI) 11 RAID Controller
(PCI) 19 NVIDIA GeForce MX 440
(PCI) 20 NVIDIA(R)nForce(TM)MCP Audio Processing unit Dolby
(PCI) 20 Standard OpenHCS USB Controller
(PCI) 21 NVIDIA(R)nForce(TM) Audio Codec Interface
(PCI) 21 OHCI Compliant IEEE 1394 Host Controller
(PCI) 21 Standard Enhanced PCI to USB Host Controller
(PCI) 22 NVIDIA nForce MCP Networking Adapter
(PCI) 22 Standard OpenHCD USB Host Controller
The (?) on the RAID Controller is exactly the way it is on screen - a yellow question Mark. No Drivers installed for this device on its properties
The PCI 11 NVIDIA nForce PCI System Management IRQ properties says there are no drivers installed for this device.
If you are going to tell me there is a conflict Chief then please be aware that you will have to give me step by step instructions. I am sorry but I am NOT PC AWARE.
Thank You for your help.
I hope it helps you help me
Juniper

PCI Card Conflicts w/ K7N2 Delta-L

Similar Messages

Maybe you are looking for