PCI Card for Analog output in the range of 10mv

dear ni,
                I want to know about the PCI card that can be generate analog output in the range of maximum 10mv. i  am going to use for caliberation of loadcell, strain gauges devices.
could you tell me on which PCI card will support this type of application.
Regards,
Balaji DP

Try:  http://www.ni.com/dataacquisition/
These have analog output voltages < 10V:   http://sine.ni.com/nifn/cds/view/main/p/sn/n12:7604,n3:7853/lang/en/nid/1036/ap/daq
You need something with a high bit count to get good resolution at 10 mV, such as the PCI-6010 which has a 16 bit D/A.   
Here are the minimum voltage specs for the 6010:
Minimum Voltage Range
-0.2..0.2 V
      Range Accuracy
283 µV
      Range Sensitivity
6.4 µV
Message Edited by vt92 on 11-18-2009 07:56 AM
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

Similar Messages

  • How to structure the DMA buffer for PXie 6341 DAQ card for analog output with different frequencies on each channel

    I'm using the MHDDK for analog out/in with the PXIe 6341 DAQ card.
    The examples, e.g. aoex5, show a single Timer  (outTimerHelper::loadUI method), but the example shows DMA data loaded with the same vector size.
    There is a comment in the outTimerHelper:rogramUpdateCount call which implies that different buffer sizes per channel can be used.
       (the comment is: Switching between different buffer sizes will not be used)
    Does anyone know what the format of the DMA buffer should be for data for multiple channels with different frequencies ?
    For example, say we want a0 with a 1Khz Sine wave and a1 with a 1.5Khz sine wave.  What does the DMA buffer look like ?
    With the same frequency for each channel, the data is interleaved, e.g.  (ao0#0, ao1#0; ao0#1, ao1#1, ...), but when the frequencies for each channel is different, what does the buffer look like ?

    Hello Kenstern,
    The data is always interleaved because each card only has a single timing engine for each subsystem.
    For AO you must specify the number of samples that AO will output. You also specify the number of channels. Because there is only one timing engine for AO, each AO will channel will get updated at the same time tick of the update clock. The data will be arranged interleaved exactly as the example shows because each AO channel needs data to output at each tick of the update clock. The data itself can change based on the frequency you want to output.
    kenstern wrote:
    For example, say we want a0 with a 1Khz Sine wave and a1 with a 1.5Khz sine wave.  What does the DMA buffer look like ?
    With the same frequency for each channel, the data is interleaved, e.g.  (ao0#0, ao1#0; ao0#1, ao1#1, ...), but when the frequencies for each channel is different, what does the buffer look like ?
    In your example, you need to come up with an update rate that works for both waveforms (1 KHz and 1.5 KHz sine waves). To get a good representation of a sine wave, you need to update more than 10x as fast as your fastest frequency...I would recommend 100x if possible.
    Update Frequency: 150 KHz
    Channels: 2
    Then you create buffers that include full cycles of each waveform you want to output based on the update frequency. These buffers must also be the same size.
    Buffer 1: Contains data for the 1 KHz sine wave, 300 points, 2 sine wave cycles
    Buffer 2: Contains data for the 1.5 KHz sine wave, 300 points, 3 sine wave cycles
    You then interleave them as before. When the data is run through the ADC, they are outputting different sine waves even though the AO channels are updating at the same rate.

  • Synchronize two PCI Board for Analoge Output

    Hi All
    Has anyone a good example for synchronizing two MIO Boards over RTSI cable.
    I found a lot examples to analoge input but nothing about analoge output.
    Thanks

    Hi Reto.
    I posted to this once, but looks like it didn't make it. I checked the examples, and Ir eally didn't see anything that did what you wanted over the RTSI bus, so I made one. Check it out.
    Mark
    Attachments:
    RTSI_AO.vi ‏95 KB

  • What is the correct USB 3.0 PCIE card for Z800?

    I'm looking to buy the correct USB 3.0 PCIe card for a Z800, but I cant find any thru HP. Any have any info> There's  12 and 60 dollar HP cards on EBAY, but I don't know if those are correct ones.
    This question was solved.
    View Solution.

    Hi,
    Based on the following specs, the machine has plenty of options:
       http://h18000.www1.hp.com/products/quickspecs/1327​8_na/13278_na.PDF
    You can buy 1-port card, 2-port card, 3-port card or even 4-port card such as:
        http://www.startech.com/Cards-Adapters/USB-3.0/Car​ds/2-Port-PCI-Express-SuperSpeed-USB-3-Card-Adapte​...
    You need to check the slot to get the right bracket for the card.
    Regards.
    ps eBay is a different story, you can buy few dollars card.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Re: Dual Band PCI Card for Satellite C660

    Hello, please can someone suggest any dual band PCI card for Satellite C660
    thanks

    >Dose it mean this forum if not supported by Toshiba?
    Buddy, its a user to user community
    Regarding the miniPCI WLan card:
    Such part upgrade is not officially supported and therefore details about compatible cards are not available.
    But from my knowledge many different notebook series have been equipped with different WLan card from Realtek, Intel and Atheros.
    Probably such cards would be compatible even if they are not listed officially as supported part.

  • Wireless mini PCI card for Satellite P10

    Hi all,
    can anyone help me find a wireless mini pci card for my Satellite P10-304 in the UK?

    Hi
    I found several WLAn minPCI Wlan cards which could be compatible with the Satellite P10 notebook.
    Wireless LAN card PA3212U-4MPC (Agere 802.11b)
    PA3273U-2MPC (Atheros 802.11ab)
    PA3300U-1MPC (Atheros 802.11g)
    PA3298U-1MPC (Atheros 802.11a/g)
    Please take a look on the WLan 802.11 standards!
    If you WLan router support an 802.11 standard I would recommend taking the PA3273U-2MPC or PA3212U-4MPC

  • PCI Card for a new SSD. Good Idea?

    Just upgragraded my 2009 MP (processor 3.33, video card, Ram). Just got a new 256 Samsung SSD wich is going below the optical drive. Did a search here about PCIe card for the drive and found that there's good and bad about it. Found this model model (Velocity solo x2). Is there one specific brand more suitable? or just make it simple and install the ssd below the optical drive.
    Thanks

    The 2008 only has two 16x PCIe slots and the Sonnet Tempo Pro should be in the #2.
    Even gpu's do not do as well as later models in performance, and some PCIe cards only supported booting in a 2009 or later.
    Installing Mac OS to Sonnet Tempo I am sure you have read of the issues and how to get around it, is even on Sonnettech.com
    Even though it 'tests' as xyz MB/sec in the real world the system is fine on SATA2 and in non-RAID setups. The 0.1ns seeks and latency and higher IO for reads. Someone did some thorough tests of different SSDs, different PCIe cards and the synthetic benchmarks. And concluded there was no real difference to the system and work load whether the system was on SATA2, but could be work performance using PCIE for other uses.
    Generally I find this to be helpful start: www.macperformanceguide.com on perfomance
    Putting scratch and graphic libraries for Aperture/Lightroom and others on a SSD and on a separarte bus helped. Even helps having iPhoto on SSD and the photo library folder on another drive - so you aren't read and write to same.
    SoftRAID 4 - using 3 drives in a mirror but it uses "stripped reads" seems like it is fast, simple, less overhead and most people just never get idea of using more than two drives in a mirror, but it works great and makes it easy to pull one for backup. SoftRAID also does a better threaded background rebuild, and during idle time scans its drives for errors and bad or weak sectors. A lifesaver. 
    Even using the optical bay for the system might be perfect and then using the Tempo Pro for other uses.
    With system's and SSD's and stripped, then of course a couple restore images and run DU against the array with TRIM enabled on a weekly basis, something, especially if the array is getting hammered as scratch. Tests though show those SSDs can take huge TBs of punishment day after day, but I have seen my own and read of too many errors.

  • Use soundcard for analog output

    Is it possible to use soundcard for analog output with LabView6?

    nicke wrote:
    > Is it possible to use soundcard for analog output with LabView6?
    Have a look in the examples under Hardware Input and Output|Sound (LV6.1)
    Dunno where it is under 6i, but the files are there.
    Impressed the crap out of some Fortran hackers by showing them how
    easy I could turn my laptop into a spectrum analyser.
    Remove "spamkill." when replying to this message

  • I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

    I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

    Go to Apple Menu > App Store > View my account > sign in and then edit the payment details with the new card details.  
    I am assuming that your card and supporting bank are in the same country as your residential (billing) address and that you are using the App Store of that country.

  • Needed  selection screen validation for all entries in the range

    Hi all,
    I'm using the below code for Material validation in selection-screen.
    SELECT SINGLE MATNR FROM MARC INTO MARC-MATNR
      WHERE MATNR IN S_MATNR.
      IF sy-subrc NE 0.
        MESSAGE e000(su) WITH text-035.     "Invalid Material Number
      ENDIF.
    This validation is working only for one record in the range.
    If I give multiple material numbers in the range having a record which doesn't exist in MARC, its not throwing the error.
    Seems like loop should be placed at s_matnr. Is that correct procedure or any pointers on the same would be of great help.
    Regards,
    Vamsee Priya.

    Hi priya
    Use this way,
    REFRESH IT_LIPS. CLEAR IT_LIPS.
      SELECT VBELN
             POSNR
             MATNR
             WERKS
             LFIMG
             ARKTX
             VGBEL
             VGPOS
             BWART
             FROM LIPS INTO TABLE IT_LIPS
             WHERE PSTYV IN
       ('ZZTC', 'ZTAD', 'ZMVN', 'ZCVA', 'ZCVB', 'ZCVC') AND "ASR 18721
                   WERKS IN ('1140', '1143', '1149').
      IF IT_LIPS[] IS INITIAL.
        MESSAGE E000 WITH TEXT-005.
    endif.
    revert back if you need any help..
    Help us to help you, Manas

  • DI Job Failed with no reason since last week : Invalid schema is specified for PASS output in the Validation Transform

    Post Author: Nono44
    CA Forum: Data Integration
    Hi,
    I have problem with DI job. That job doesn't work since friday.
    The error is :
    (11.7) 04-21-08 09:48:56 (E) (2588:2396) XRN-130125: |SESSION
    OracleApps_GLFacts_Load|STATEMENT
    <GUID::'93342049-fbd9-4942-bab2-5565e8e248bf' TRANSFORM Validation
    OUTPUT(Validation_Pass,
    Validation_Fail)>
                                                         Invalid schema is specified for PASS output in the Validation Transform  Does anybody know what is it ?
    Thanks a lot.
    Arnaud

    Post Author: Nono44
    CA Forum: Data Integration
    Hi,
    I have problem with DI job. That job doesn't work since friday.
    The error is :
    (11.7) 04-21-08 09:48:56 (E) (2588:2396) XRN-130125: |SESSION
    OracleApps_GLFacts_Load|STATEMENT
    <GUID::'93342049-fbd9-4942-bab2-5565e8e248bf' TRANSFORM Validation
    OUTPUT(Validation_Pass,
    Validation_Fail)>
                                                         Invalid schema is specified for PASS output in the Validation Transform  Does anybody know what is it ?
    Thanks a lot.
    Arnaud

  • Count 4th consecutive pulses from the analog output of the encoder

    Hi
    Iam getting analog output from the encoder and i want to count the 4th peak of the analog signal. Kindly suggest the best method Once 4th pulse is detected counter will increments.
    Pl refer the encoder output .
    Thanks
    Attachments:
    encoder sig.JPG ‏26 KB

    Whatever you've counted using your logic, divide it by 4 and convert it to an integer (towards negative infinity)..!!
    This should work.
    I am not allergic to Kudos, in fact I love Kudos.
     Make your LabVIEW experience more CONVENIENT.

  • When using the analog inputs and analog outputs of the PCI-7344, what is the conversion between the voltage entering the card to counts? Similarly, what is the conversion between counts to voltage at the output of the card?

    I am using the PCI-7344 to control my system. The analog inputs are connected to the output of my system while the analog outputs serve as feedback to the system. The system is a servo. I want to know what is the conversion between the voltage read at the input, to card counts, and finally to the voltage output to the system.

    Carole,
    If you are trying to do analog feedback with a servo motor, Chapter 14 of the manual talks about how to set up the torque feedback. Also linked below is a LabVIEW example of analog feedback.
    Chapter 14
    NI-Motion User Manual
    Automatic Analog Feedback with FlexMotion example
    A. Talley
    National Instruments

  • How do I configure 128 channels of DIO and 128 channels of Analog output with the availabili​ty of 3 pci slots

    I have only 3 slots of PCI or 4 slots of ISA bus, I want to configure with the minimum possible modules to attain 128 channels of DIO and 128 channels of analog output. This is inturn fed to the PCM (Pulse code Modulator). The cards will be placed in industrial PC.

    Associate Engineer-Marketing,
    Using just those 3 PCI slots you're not going to be able to get the 128 analog output channels. You will probably want to go either the MXI-3 (PCI bus extender) to a PXI chassis or E Series DAQ card to a SCXI chassis for such a high channel count system. Which analog output cards and which digital I/O cards you will want depends on your application. You will have to decide whether you will need static or dynamic analog output as well as whether you need clocked digital I/O or not. I highly recommend contacting our internal sales department at 1-800-433-3488. They are great at helping specify systems.
    Ames
    Applications Engineering
    National Instruments

  • Streaming data from disk to analog output (using the PCI-6713)

    I have a question about the PCI-6713. I want to stream data from the hard disk to all of the card's 8 outputs at its maximum update rate of 1 MS/s. Using single precision (32-bit) variables, this works out to a 32 MB/s transfer rate. That seems to be pushing the limits of most hard disks.
    However, the output card only has 12-bit resolution. Is there a way - using LabView or some other software - to store the data on the disk using only 12-bit numbers? This would drastically decrease the transfer rate required.
    Thanks for your help.

    You could use 8 or 16 bit integers in LabVIEW rather than using 32-bit single precision numbers. I'm sure integers don't have the precision you're wanting though. That is the only way to reduce the size of the numbers you are writing. I am fairly positive there is no way in LabVIEW to do what you are wanting.
    Regards,
    Todd D.

Maybe you are looking for

  • Need for a Custom Field in PO

    Hi there, I want to store a container number field which is a 20 character field in the PO. It can either be in header level or at item level. Is there a standard field to store the container number in SAP? If not make a suggestion please. Thanks Bal

  • Nokia Lumia 620 Hangs

    My brand new nokia Lumia 620 phone start hanging now its from 30 days of purchase Download many apps that's why????????

  • All of a sudden my background was reversed and looks like a negative.  how do i get it back?

    All of a sudden my background was reversed and looks like a photo negative.  How do I correct that?

  • SOAP message formatting in Provider-based endpoint.

    Good morning. We have a Provider-based endpoint. Our client sends a SOAP request containing a signed node (XML signature). But our service is not validating it, because WLS formats the incoming message at some point. Something like this: Client is se

  • How Module Processor initial load

    To:PI Specialists Situation: We use sender module processor. We restart PI everyday. So sometimes we get errror mail cause by sender module processor. The reason of error is look up error for sender module processor. after polling waitting, we can se