PCI Device error on bootup/ and startup

I have a Toshiba Satellite U405D-S2850 running on Windows Vista Home premium; 32-bit.
Everytime I turn on my laptop on bootup I hear two VERY loud beeping sounds and a black screen appears which shows the following text:
Phoenix Trusted (tm) NB
Copyright 1985-2008 Phoenix Technologies Ltd.
All Rights Reserved
CPU =AMD Turion (tm) X2 Duel-Core Mobile RM-70
Video BIOS shadowed
ATAPI CD-ROM: HL-DT-ST DVDRAM GSA-U20N
Fixed Disk 0: Hitachi HTS542525K9SA00
Mouse initialized
ERROR
Resource Conflict - PCI Serial Bus Controller in slot 08
Bus: 09, Device: 01, Function: 00
ERROR
Resource Conflict - PCI inslot 08
Bus: 09, Device: 01, Function: 02
ERROR
Resource Conflict - PCI in slot 08
Bus: 09, Device: 01, Function: 03
Press <F1> to Resume, <F2> to Setup
When I press F1 my laptop just continues booting with no problems and when I press F2 it just goes to bios. And sometimes on startup a window opens saying it needs to install a PCI device, I've pressed install but in the end it always ends up saying failed to install cause of unkown PCI Device. Other than those two problems/messages my laptop runs fine. But still I'd like to fix this problem just in case it might turn into a bigger problem in the future. I hope someone can help me out. I'm not really computer literate. Thanks

Hi, I was wondering if anyone has replied to you about this? I have the same problem and even though the computer still works, its just really annoying to hear the two loud beeps. Especially when I'm studying in a very quiet library!

Similar Messages

Pci device error

After re-installing xp with sp2 im getting pci device error in the ctrl panel and cannot get any sound from my pavilion2020ca. I,ve tried all the drivers in hp site to no avail. Any help would be grateful.

Do you have ZE or DV 2020ca? If you have DV2020 have you installed Microsoft UAA driver?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Conflicting device error for keyboard and touch pad on thinkpad laptop

Hello,
IBM Thinkpad T43
1875
Windows XP (SP3)
Keyboard and touch pad completely do not work in Windows.
They do work in BIOS.
Tried connecting external USB keyboard. They also does not work
Getting Conflicting Device error in Device Manager for keyboard and touch pad
exclamation point is on the keyboard device.
getting Error Code 10 on keyboard.
I cant go to a prior restore point. That does not work.
tried uninstalling them, that didn't work either.
can't change auto configuration...it is grayed out.
Please help.
What can I do?

This is really strange I must say...
But you say you are using the same drivers for both 32-bit and 64-bit, this shouldn't affect the PE-part, but make sure you are using the correct drivers 64-bit for x64 OS and 32-bit for x86 :)
If you make a bootable memmory stick from the 32-bit deployment share, does it work then or is it the same problem?
Could it be as easy that the deployment share isn't updated?
//Andreas
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin
I also said that nothing's missing so, I thought it implies that only correct drivers are there.
I filter out all unwanted versions from both deployment shares to save on disk space.
Deployment Share have been refreshed several times with refreshing PE images too.
Mem-stick for 32-bit version works fine - keyboard and touch-pad work in it.

Solaris 10 on Sun Ultra 40 --PCI system error on /bus/device/function 0048h

Everytime I boot to Solaris 10 (08/07) I get the following message at the top of my screen:
PCI system error on /bus/device/function 0048h
The system boots up successfully, but I find this error to be particularly annoying. I have no third-party cards plugged into any PCI slot.
Why am I getting this error. Is the BIOS just giving me a bogus error?
Any help would be appreciated.
Thanks.
Robert

Hello,
I even got the same Problem with an Ultra 40. After powering off and on the system during the last 3 days, now i got an error mesage, "CPU3 can not be started"
cleared the CMOS and now i am back on "PCI System Error on Bus/Device/Function 0048h" the system is running with the latest 1.7 Bios update.
First of all I tried to flash the system back to an lower version but the flashsoftware seems not to support this operation have to make own boot media with the flashprogramme and flash by forced the 1.0 or 1.2 version.
regards
Monchichi

Yellow mark - PCI Device" and "Network controller" on Satellite A100-787

There is a yellow mark in the device manager for a driver called "PCI Device" and also for "Network controller" although the network connection (LAN) is working well and all other functions of the computer seem to be working well.
What are those devices??

Regarding the LAN driver, it is installed and working properly (the wired one). The wireless driver is provided by Atheros which I installed from its own setup file and it didnt give me any error so I assume it is installed well although I havent tested the wireless connection yet. I am going to do that shortly.
As for the PCI device, the card reader is able to read Sony memory stick and one type of SD card with certain teeth arrangement but not another card with a different teeth type. I dont know why it is the case. so this remains a mistery to me.

Get "no bootable device- insert boot disc and hit any key" error

Hp G72 Laptop, Windows 7 64 bit,
"no bootable device-insert boot disc and hit any key" (I have no boot disc.)
I was in the process of replacing the hard drive and the computer was starting the final phase after copying all files. When it restarted the first time, I got the message. I was getting this message randomly prior to replacing the hard drive and if I turned it off for 2 or 3 hours and turned back on I would not get the message. The reason for replacing the hard drive was a "Smart Disc " imminent failure error message.

Yes and yes. The final recovery disc had completed and it was moving to the next phase. It said the computer would restart several times during this phase and when it went to the first restart, the error message came up and I could proceed no further. I ctrl/alt/del and restarted, pressed escape to get the start-up menu but was lost at all the options. The information screen looked like the old hard drive info.

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

HP LaserJet Pro 200 color MFP M276 - new - Device error and Cleaning cycle issues

HP LaserJet Pro 200 color MFP M276 - this is a new printer a friend purchased at Staples. It connects WiFi okay and prints when prompted to but it then does a "Cleaning" cycle after every print job. It also displays "Device Error" at the same time. It has been powercycled as instructed and the error continues to reappear and the "Cleaning" cycle continues as well after each and every print job. My friend paid Staples to set up this printer to a new Acer Laptop and D-Link router he also purchased before he brought them home. He was told everything works fine .. they lied .. Laptop and router have no issues .. just the printer. The Laptop sees the printer okay and software is installed without issue. Any ideas why the "Device Error" and "Cleaning" cycle after every print job is happening? He is on the verge of taking the whole outfit back as Staples has not assisted him and instead directed him to download the manuals from HP. Any suggestions are appreciated

Have you tried a hard reset on it? I know you said you power cycled it, but a hard reset is sometimes different than what some people consider a power cycle.
Follow these steps to perform a hard reset on the printer.
1. Press the Power button to turn on the product.
2. With the product turned on, disconnect the power cord from the rear of the product.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the product.
7. If the product does not turn on by itself, press the power button to turn it on.
Try that out and let me know if it helps.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Error message on screen: No bootable device -- insert boot disk and press any key comes on

Error message comes on screen: No bootable device -- insert boot disk and press any key. What do I do?

Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
If the above is not possible or failes, then replace your hard drive.

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I am sorry Erickkasner but there is no longer direct support provided for Creative Suite 5.5 installation issues.
You are welcome to post any specific errors you are able to discover within your installation log to this discussion. Since you are using Windows then Exit Code 15 could mean one of the following:
Installer database is corrupted
Update pending to your operating system
Improper permissions set for the Media.db
The installation log file should provide additional insight into the exact error you are experiencing. Please make sure to use the find command to look for the words 'ERROR' and 'FATAL' to locate the relevant error messages.

Mass storage device and portable device ERROR code 31 41 HP PAVILION s5123w Desktop PC

I am using windows vista home premium 32 bit First time I pluged nikon camera into computer. Says installing device driver software but it does not install. Device manger under portable device digital still camera yellow question mark error code 31 under mass storage device error code 41. The device driver loads and installs on my daughters Laptop so ther is some thing wrong with my PC Every time I reboot computer windows need to intall driver software for your Microsoft WPD file system volume driver. Loacate and install driver software recomended says installing driver says successfully installed. I have to click Safely remove hardware usb mass stoage device multi flash reader usb device generic volume f I click stop says safe to remove I do not have a reader plugged in my computer. this happens every time I reboot> If you don't understand what I am talking about Let me know.
thanks Scott

Hey poochokid,
I'm sorry you're running into this issue. For the camera, if it's newer (made in the last 3 or 4 years) you may need to go to the Nikon website and find the camera software that is made for Vista. I could try to help you find that, if you could give me the model of camera you have.
For the Microsoft WPD file system volume driver issue take a look at this thread from another forum.
I hope this information helps! Let me know what the results are

"No Bootable Device -- Insert Boot Disk and Press Any Key" ~ Bootcamp Error

We have a Mac Mini with both Mac OSX and Windows 7 installed on the Bootcamp partition. It's all been working fine since we installed them a few weeks ago, and we've been able to use both areas without any problems.
However, we just tried to load the Windows partition and it came up with the error message: "No Bootable Device -- Insert Boot Disk and Press Any Key". Does anybody know why this is happening as it is the first time this message has come up in a few months, and my dad is seriously ****** off right now because he has work to do on the Windows area. :/
Also, someone told me that I had to install Windows again. If this is the case, will all of the files on it be safe? If not, that's not an option.
Thanks for your time,
Tom.

We have a Mac Mini with both Mac OSX and Windows 7 installed on the Bootcamp partition. It's all been working fine since we installed them a few weeks ago, and we've been able to use both areas without any problems.
However, we just tried to load the Windows partition and it came up with the error message: "No Bootable Device -- Insert Boot Disk and Press Any Key". Does anybody know why this is happening as it is the first time this message has come up in a few months, and my dad is seriously ****** off right now because he has work to do on the Windows area. :/
Also, someone told me that I had to install Windows again. If this is the case, will all of the files on it be safe? If not, that's not an option.
Thanks for your time,
Tom.

Problems with Ethernet controller and PCI device driver on Satellite L30-10X

Hellow!
Sorry for my bad English, I'm from Russia.
Just few days ago I bought Satellite L30-10X with W Vista on board. My opinion, that this OS does't very good on this computer, so I install W XP.
I have some problems with drivers. At first, I dont know what model I have:PSL30 or PSL33? I download all drivers for both models. But, after installation, computer doen't find drivers for Ethernet controller and PCI device...

Hi
Satellite L30-10X belongs to the PSL33E series. This number can be found on the label placed on the bottom of the unit!
You have to choose this number from the driver download form to get the compatible XP drivers.
I dont know why you are not able to install the LAN driver. Ive got the same notebook with Vista and Ive installed the XP and all drivers run fine.
I assume you have installed the drivers in wrong order. Please take the look in the Toshiba installation instruction txt file. In this order you have to install the driver! Its important.
I think you should install the XP again to ensure the clean registry and then download and install the compatible XP drivers like mentioned in the installation instruction file.
Good luck

I have been getting errors in itunes and it said to redownload it. I started to download and get an erro the says Service apple mobile device failed to start. Verify that you have sufficient privileges to start system services. What do I do?

I have been getting errors in Itunes and it said to redownload it. I started to download and get a error that says "Service 'apple mobile device' failed to start. Verify that you have sufficient privileges to start system services" .
What does this mean and how do I verify what they are asking me to verify???

Hi annibu757,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services. I do not know what to do.

I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services. I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

PCI Device error on bootup/ and startup

Similar Messages

Maybe you are looking for