PCI-e driver required?

I have a new MSI G31 mobo with an E7400 processor which I now have operational.
After installing my first PCI-e card (a GeForce 8400 graphics adapter) the device was not recognized.
Before returning this card I was wondering where the drivers for the PCI-e bus are coming from. I don't see any question marks when I look at the System Hardware list.
There was no listing of a PCI-e driver with the MSI Drivers CD...but I did see a PCI-e folder under the network/realtek path on the Driver CD.
Any help in this area is greatly appreciated.
Thanks
Larry

So, you start the system and then? Can you see the P.O.S.T. Status Screen?
Quote
a new MSI G31 mobo
Which one exactly?
--> http://global.msi.eu/index.php?func=searchresult&keywords=g31
Quote
a GeForce 8400 graphics adapter
What brand/model? Does it have its own power connector?
Does the onboard video function work properly?
What PSU are you using (please write down the brand & model name as well as the amperage limits on the +12V rail).

Similar Messages

Time machine external hard drive requires repair every time I turned the computer off or after I ejected the external hard drive?

Time machine external hard drive requires repair every time I turned the computer off or after I ejected the external hard drive?

What kind of repair?

Nigpib-linux PCI-GPIB driver does not work on RedHat 8.0

The PCI-GPBI driver for linux (nigpib-linux) can't be installed on Linux RedHat 8.0. The first error is a reference to "malloc.h" having to be replaced by "slab.h". Then, the module compiles, but it has to be loaded with the "force" option, by replacing all instances of "insmod" in the "INSTALL" script by "insmod -f". When loading there is an error message that the kernel is compiled with gcc 3.2, but the module with gcc 2.9, and this is known "not to work". One can load the kernel module with "insmod -f", but when running "ibconf", "insmod" is used when saving the configuration, so there is an error message again. The solution to this problem is probably to compile the source code for the driver (supplied by NI a
s a binary) with gcc 3.2. It would be so much easier if NI opensourced the entire driver.
Can NI compile a binary against gcc 3.2 on RedHat 8.0??
Thanks in advance.
Best regards, Erwin

Ok, my bad. Apparently the gcc3 compilied driver has
been available since Jan 2003. Here is a link:
ftp://ftp.ni.com/support/gpib/linux/nigpib-linux-0.8.3.tar.gz
I should think NI could use a better naming convention to
flag this a bit better. (Like nigpib-linux-gcc3-x.x.x)

Why is my hard drive requiring authentication before allowing me to drag documents to it?

Why is my hard drive requiring authentication before allowing me to drag documents to it?

Why do you even think it needs defraginng, your iMac is not an old MS Windows machine?. Defragging HD's is a very antiquated and unneccessary thing to do. Even current MS Windows machines don't need it.

Why do my two external hard drives require "ejection" prior to shutdown?

Why do my two external hard drives require "ejection" upon shutdown?

Problem solved. I had plugged in my external hard drives into a USB card. I switched my two printers to the USB card and plugged in the two hard drives into the computer's USB outlets and now NO improper eject messages. What a relief!!! Thanks again.

What is this ?   com.apple.audio.DriverHelper[162]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.

What is this ?   com.apple.audio.DriverHelper[162]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.

What is this ?   com.apple.audio.DriverHelper[162]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.

Floppy drive required?

I am planning my first build. Is a floppy drive required in the system to load drivers and Windows XP?
Thanks,
Jim

Keep in mind that so long as you have one and a cable you can keep it in your repair kit for the system. When needed you can always power down and plug it in. It does not need to be in the case cluttering things up anymore. On the rare occassion when it is needed just use it and remove it again when you are done.

PAX MASTER PCIe Titanium Driver Suite V1.25

PAX MASTER PCIe Titanium Driver Suite V1.25
Software Components:
Creative Console Launcher 2.61.53
Creative Audio Console 3.00.59
Creative Volume Panel 2.21.14
THX Console 3.50.08
Creative AutoMode Switcher 1.01.05
Creative ALchemy (X-Fi Edition) 1.43.06
Dolby Digital Live Pack 3.00.06
DTS Connect Pack 1.03.08
Driver version XFTI_PCDRVBETA_US_2_17_0008C
Updated Tweaks as 12.30.11
Add Over Drive bass into the driver set to 140%
Added 31hz enable to headphones you won’t see in main windows but should work with headphones.
Lower mids 45%-75%
http://dl.technewshw.com/driver/PAX/...ite%20V1.25.7z

New release.

PAX MASTER PCIe Titanium Driver Suite V1.00 11.03.11 Release.

PAX MASTER PCIe Titanium Driver Suite V1.00
© Creative all rights be long to Creative and logos. Creative giving me there writing persimmon by Robert McClelland.
PAX related logos and software and drivers are own by PAX ®
- Please don't remod my work with out permission you can contact me at Hardwareheaven.com
- XP/Vista/Win7 – 32/64Bit - Read me
PAX
Performance Audio Xeleration
Tweaked Drivers for Creative Soundcards:
Better Performance. Better Audio. Better Xeleration.
PAX MASTER PCIe Titanium Driver Suite V1.00
Supported cards:
Sound Blaster X-Fi
Titanium
Supported OS:
Fully working Suite for XP, Vista, Win7
32 and 64Bit
Added V4.25 Drivers in the suite.
Please used register cleaner like tune up Advanced SystemCare iobit.com or crapcleaner Check Error for hard drive before installing.
Software Components:
Creative Console Launcher 2.61.53
Creative Audio Console 3.00.59
Creative Volume Panel 2.21.14
THX Console 3.50.08
Creative AutoMode Switcher 1.01.05
Creative ALchemy (X-Fi Edition) 1.43.06
Dolby Digital Live Pack 3.00.06
DTS Connect Pack 1.03.08
Driver version 2.17.0008.1 6.0.01.1348
Updated Tweaks as 11.03.11
SPDIF out works in 5.1 sound with DDL now.
Add RCA and Stereo Tweaks
Added Clear Mids to each speakers.
Added Tweak Prologic tweaks for each speaker
Add SDPIF Out Tweaks.
Added each 100% Speakers Volume
You muss reinstalled the whole driver software package.
THX Console fully working now.
You don't have rename it anymore it's fix now Enjoy
Formally known as Youpax, Pax was founded by Robert McClelland 6 years ago, who is continuing to provide an alternative tweaked driver to the Official driver released by Creative.
Why should I install this Pax alternative?
Pax is aimed at improving sound quality and to give a more deeper bass sound, while retaining the clarity of the overall output audio. Most users continue to use Pax drivers once moving over and never look back!
For support, feedback and latest driver updates, please visit : [url=http://www.hardwareheaven.com/pax-drivers/">http://www.hardwareheaven.com/pax-drivers/[/url]
[url=http://www.technewshw.com/forum/index.php">http://www.technewshw.com/forum/index.php[/url]
[url=http://forums.guru3d.com/">http://forums.guru3d.com/[/url]
PAX® 2005-2011
[url=http://dl.technewshw.com/driver/PAX/PAX%20MASTER%20PCIe%20Titanium%20Driver%20Suite%20 V1.00.7z">http://dl.technewshw.com/driver/PAX/PAX%20MASTER%20PCIe%20Titanium%20Driver%20Suite%20 V1.00.7z[/url]

New release.

PAX MASTER PCIe Titanium Driver Suite V2.00 Default Tweak Edition 6.29.12

PAX MASTER PCIe Titanium Driver Suite V2.00 Default Tweak Edition 6.29.12
Updated Tweaks as 6.25.12
New Default tweak settings in EQ.inf
Ever bass and treble set at 100% and all Mids at 50%
New Center Subwoofer and Center Bass tweak
Added CenterTreble
Added Bass Treble Mids over ride tweak inf. That way you can turn volume up or down. Please make sure you reinstalled the driver each time you adjust There all in common folder.
Everything Default.
Updated Cab Support installing tweaks. Added Tweaks all infs to
TWEAKS.Registration, EQ.Registration, BASS.Registration, TREBLE.Registration, MIDS.Registration in main inf. Add windows 8 setup support from the beta drivers but there base on currect drivers. Drivers are much older from new windows 8 beta all they did change cab support setup.
Improve Driver installing support.
http://dl.technewshw.com/driver/PAX/...k%20Edition.7z

New release.

Terredo Tunneling adapter driver and Ralink PCI Adapter driver problem

Have HP A-I-O, running Windows 8 and getting errors ref. Terredo Tunneling Adapter driver and Ralink PCI Adapter driver problem. Occassionally lose internet or wireless mouse and kebouad. Troubleshooting reloaded drivers for both but did NOT resolve the problem.
Any ideas? Wouold Refresh work? If so, should I just load Windows 8.1?

Sysherman, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

File Group 'xilinx_softwaredriver (Software Driver)': Requires either a MLD or a MDD file

Hi all,
Since upgrading to 2015.1 i keep receiving and odd warning message when packaging IP. The File Groups window keeps showing the warning given below:
[IP_Flow 19-4629] File Group 'xilinx_softwaredriver (Software Driver)': Requires either a MLD or a MDD file. Neither have been added to file group: "xilinx_softwaredriver"
According to what I can see in the file lists the MDD is there so I don't really understand the warning. I have tried removing and re-adding the MDD file but this does not seem to change anything. This only seems to be a problem on 2015.1 and didn't show up at all on 2014.2.
Can anyone shed any light on this matter?
Regards
Simon

Hi Simon,
actually what was marked as a "solution" was definitely not the solution.
The warning is not harmless. In my case the IP driver files were not copied into my SDK project.
You can make the IP integrator accept the files by changing the values in the "Type" column in the File Groups panel of the PackageIP tab.
The <ip_name>.mdd file's Type field shall be set to mdd driver_mdd
The <ip_name>.tcl file's Type field shall be set to tclSource driver_src
The Makefile file's Type field shall be set to unknown driver_src
You can make a further check by creating a new AXI IP from Vivado 2015.1 and comparing the settings.
Hope it'll help.
Cheers
Alessandro

Moved Music to New Hard Drive - Required folder not found??? pls help

Hello
I have recently purchased a new external hard drive as my crappy Dell was full to the brim with music.
I have moved all my music files over to the hard drive and re installed itunes.
Now when i drag my music folder into the itunes library it updates but the shortly after an error message occurs that says:-
'Itunes Libray music file cannot be saved. Required folder not found'
Previously i have saved my itunes folder within my music folder?.
Now everytime i close down itunes all my music has gone from it!??
Any suggestions....sorry if being really ignorant..not too profficient on computers..
Thanks in advance.
Sam
Dell PC Windows XP
Dell PC Windows XP

I think itunes by default looks inside you my music folder. In the itunes preferences screen there is an option to select a new folder to your library. Change the path to the music folder on your external drive. Make sure to always have the drive turned on before launching itunes though.
You may also be able to replace the my music folder with a shortcut to the music folder on the external drive. This behavior may not work in windows though so I'm not sure.

Driver Require or HP laserjet 1015 PCL Printers for Windows 8.1 64 Bit

Dear Sir,
I Working at PGVCL (Leading Electricity Distribution COmpany o Gujarat (India) ) having many HP printers Laserjet 1015 PCL. Now, recently our company upgrade our computer system with OS of Windows 8.1(64 bit),now trouble of printing start. No any above printers install in PC, due to non availibility of that Drivers. I checked HP websites for that Drivers. but our requirements driver not available in it. Finaly many printers of HP become unusable for us.
So, you are kindly requested to please provide Drives of Printers for HP LaserJet 1015 PCL for Windows 8.1 (64 Bit) or provide guideline ti install it in our PC. So, we can use HP Printers in our work place.
Regards:
Mr. Pranjal [Personal Information Removed]
[Personal Information Removed]
Contact No. [Personal Information Removed]

My Windows 8.1 Professional 64-bit system has a built-in driver for the LaserJet 1015 model:
You may have to click the Windows Update button in the Add Printer dialogue, then wait (perhaps for several minutes) whilst additional drivers are downloaded, before the list is repopulated.

Time Machine says both of my external hard drives require reformatting to case insensitive. What do I do?

I have been successfuly using Time Machine to back my iMac to an external hard drive (via usb) and everything has been fine for the last year. I have been using TM to back up to a HD called Terra LaCie via usb.
A week ago, my iMac hard drive was full--so I spulrged and bought a 6 TB external hard drive (Western Digital My Book-Thunderbolt). I set up the new Thunderbold HD to use RAID 1 (mirror) and copied most of my iMac hard drive over to the Thunderbolt HD.
I kept my working photographs (most recent) on my iMac and felt good to know my older photographs are on my new Thunderbolt hard drive.
For a few days, Time Machine seemed to work fine (backing up my iMac to Terra LaCie HD. I haven't been concerned with backing up the Thunderbolt drive (as I feel that mirroring is same as backing up).
Yesterday, Time Machine indicated the lastest back-up failed (for the HD called Terra LaCie). Now, when I go into Time Machine, the dialog box indicates the following message:
"Are you sure you want to erase the backup disk “Terra Lacie”? Erasing will destroy all information on the disk and can’t be undone.
The disk must be erased before it can be used for Time Machine backups because a disk you are backing up is case sensitive, but the backup disk is not."
When I open Time Machine to look at my external hard drives (I also have a third usb portable drive); two of the three drives indicate the following:
"reformat required; case insensitive disk".
The small, portable hard drive (that I'm also using) doesn't say it needs to be reformated (but my new Thunderbolt and my old usb HD both indicate the same message (above).
What should I do? I just spent days transferring my photographs from my iMac to my new Thunderbolt. Should I just not use Time Machine any longer and work from my Thunderbolt drive?
Am I to understand that my iMac suddenly become case sensitive? Sorry if this was too much information about my hard-ware set-up.
Any help someone can provide me would be greatly appreciated. I suppose I need to understand Time Machine and perhaps my Thunderbolt better.

Hi BDAqua,
Bravo, you helped me solve my problem.
The Case Sensitive Disk was the small portable hard drive that I was using termporarily.
I just disconnected it and I started TM machine and everything seems to be working just fine.
Thank you very much!!!!

PCI-e driver required?

Similar Messages

Maybe you are looking for