PCI Ethernet card problem.....please help!

Hi everyone, I intalled yesterday a PCI Ethernet card (10/100) on my PowerMac G5.
!0.5 immediately recogenize it and setted it with DHCP mode but internet looks to be slow so I chaged the configuration with static IP but with out any good result.
Internet works but very slooly while the network works great with (10/100 card and fine with integrated gigabit lan).
Someone could help me to understand while the PCI ethernet card doesn't work fine with internet? It's directly connected on a Netgear firewall routrer.....
thanks to everyone

But it could be unsupported the second ethernet on a powermac g5?
No, the fact that it shows up is proof that it works.
What Speeds are you getting with it?...
http://www.speakeasy.net/speedtest/
Also, in System Preferences>Network>Show>Ethernet 2>Ethernet tab>Configue:>Manually, try setting the speed lower & Duplex to Half-Duplex, restart required, test that setting.

Similar Messages

Nokia N8 sim card problem please help!!

I have been the proud owner of a Nokia N8 for about 9 months now without any problems or issues jus some random bugs...since N8 is a troubled device as we all know. But anyways jus now it has come up with lots of issues...at first my phone started to restart as soon as the phone started up. Even before all the apps loaded up and i tried around 15 times to switch off and start and stuff. But to no avail...so i went on some forums and blogs and got some tips like resetting it by holding down the power button for 8 secs and everything but still the same problem. Now, I removed my sim card and put in a different one and VOILA it worked!!! No restart so I thought maybe the older sim was faulty. but as i put the old sim in another phone...it worked in that phone! I was dumbfounded as the sim was working on my n8 before toO! ......so i just ignored it and i used the other sim in my n8 but not for long after half an hour the phone was not starting up sim card or no sim card. so i flashed my phone to the official Symbian Anna and i tried booting up without a sim card and the phone works properly. but as soon as I put in the sim card and switch the profile to normal mode..the phone freezes for about 5-6 seconds and reboots only to find my phone in offline mode again and same problem. I have tried changing sim cards nd memory cards, reset, reflash, format the mass memory, and everything else possible but in vain. The problem still exists!! Can anyone please help me as Im very fond of the phone and I dont want to send it to the service center as they would come up with some lame excuses + i hav lost my warranty card!! Please help....and btw the phone works flawlessly without a sim card! And also, in offline mode when i switch on the bluetooth...the phone freezes and restarts! Evn the WLAN keeps on searching for network and doesnt find any even though there is! Any help would be appreciated... thank you!

Just want to say "I dont have my warranty card"
No official Nokia care point will say this as they can check the warranty satus online using your IMEI number- if they do not do this, either insist they do or report them to nokia care direct and lodge a complaint. (0845 045 55 55 from the UK)
Even if the warranty has expired online, this can be extended if you can provide a proof of purchase date. This can be a delivery reciept if you bought online, or your high street retailor will be able to provide you with a copy if you ask them- even your original service agreement should be enough. Remember you get a full 2 years warranty with all Nokia handsets.
Nokia Care are there to help, not to make things difficult for you. They go through untold amounts of training to ensure you get your handset back as soon as possible in a fully working order.
I feel bad you feel such reluctance to contact a care centre, Nokia have gone to massive efforts to provide consumers with this kind of readily available support.
If you are in the UK and your local care centre is not helping you I would suggest you call the one i use, they will give you all the advice you need 01242 539539 (i hope giving out this info is ok on the forums)

Memory Card Problem - Please help

I have a 4GB SDHC memory card that is not working in any of the cameras I have tried it in. When I put the memory card in a USB memory card reader and plug it into my computer, I get a message saying the card needs to be formatted. After formating the card, I put the memory card back into the computer and now I receive a message saying "This card cannot be used"
I dont know what else to do to make this card work. It is only about a week old.. Please help!

Hi junebaby510,
I would suggest making sure your computer has the drivers needed to support SDHC memory cards, and if it doesn't you should be able to download and install the necessary driver from computer manufacturer's website. SDHC memory cards are physically the same size as SD cards and are inserted into the same slot as an SD card would be on your card reader, but they do require specific drivers to be able to be read by a computer.
You should always format your memory card with the camera that it is intended to be used in, and remember whenever you format your memory card all images on your memory card should be removed. If the driver doesn't work I would suggest exchanging the memory card for a new one which you should be able to do if you have only owned it for a week. I hope this helps!
Thanks,
Allan
Community Connector
Best Buy® Corporate
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Memory card problems please help!

Ok I've never quite been able to figure this one out, and I figure this is the forum to come to to try and fix it. I have a Canon photo printer with memory card slots I've been using for a while now as a stand alone. Now that I have my iMac I decided to hook it up but here's the problem. When I try to delete selected pictures from a memory card I can't because it's read-only, and I can't change it to read-write. If fact when I connected my camera to my old Windows PC I couldn't do this either. iPhoto asks me after the import if I want to blank out the memory card, but I want to keep certain photos on the card. I just want to go in and delete files like any other USB drive. I tried "Get Info" but there is no way there to change to read-write. This is more of a problem with the memory cards than my printer or iPhoto, but if anyone knows a way around this I'd really appreciate it.

... also I've checked the little write-protect tabs, I have 2 SD cards and both are not set to lock and neither lets me A. delete anything or B. put any files back onto them. In my experience it seems that on both Mac and PC they have tried to over-simplify the process of managing digital photos by forcing you to use applications rather than learn simple file management(i.e. cut, copy and paste). I don't know why photos have to be different from every other file type. If I put in my Memory Stick Duo in my PSP and connect with USB I can delete and move whatever I want just like I've always been able to, even photos. It seems that as soon as an SD memory card comes in contact with a camera(mine's a Canon PowerShot) the only way to put anything onto it is to take a picture. Again if anyone knows how to change photo memory cards to read-write status it would be fantastic.

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
I don't know.. I need clarification and help, PLEASE.
Thank you very much in advance!

Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

I need a PCI ethernet card driver for my Performa 6360...

Roughly a week ago, I decided to add yet another one of my classic Macs to my LAN, a classic gaming LAN of sorts, with that mac being a Performa 6360. With it's single empty (at the time) PCI slot, the solution for an ethernet card for the system was basically screaming at me. Unfortunately, I went to my local electronics store with the assumption that PCI ethernet cards are fairly generic devices that should work in nearly everything without a problem. That turned out not to be the case. Once I finally aquired the time to install it, the card itself appeared to work, with the outer LEDs indicating network activity and a 100mbps network speed, however, when I went into the Appletalk or TCP/IP control panels, I came to the terrible realization that I needed a driver. The included CD was, much to my dismay, Windows only, Google searches haven't been much help, and worst of all, I seem to have misplaced my reciept. The "card" I keep mentioning is a Linksys LNE100TX version 5.1. Here is what is shown in the apple system profiler:
==============================
PCI Slot
Card type: ethernet
Card name: pci1317,574
Card model: -1
Card Rom #: Not available
Card Revision: 17
Card Vendor ID: 1317
==============================
What I am wondering is where I could find a driver for this card, and if that answer is "nowhere", is there any way I could get this card functioning under Mac OS 8.1? Any help would be greatly appreciated. Thanks.

Niteshooter wrote:
Well the good news is there was one,
http://www.welovemacs.com/net-cs2-fe.html
finding one, is a good question. Oddly enough the link you posted to the 10T version is the same company as above.
Yes, I have tried searching a number of places for it, and haven't come up with much. Here is what a google shopping search pulled up (eBay came up empty), the first being "unavailable" for purchase once you add it to your shopping cart and the second costing only $150! I could easily buy a new (used) mac with the card installed in it for that much!
As for the PCI slot cards you are trying, keep in mind that you are trying to use current cards which didn't exist back in the day your Mac and OS were made...... I have Asante 10/100 PCI cards in some of that generation mac and they work fine but then they were supported by the OS.
Good point. Even back when I purchased it, the card seemed a bit of a long-shot to me, too. However, being on sale for $15, I thought, "why not at least try?". Unfortunately, I came up with the results above. However, you have given me a good idea. I realize from reading a few posts around here on the issue that it is a good idea to keep the pci slot of the computer open on this computer until there is a need to upgrade, let's say, for a graphics card. However, what if I have no future plans to add anything (as is currently)? Is it really that necessary that I keep the slot open? I'm sure it would be exponentially easier to find a card for that.
A long shot might be to try loading OS 9.0.4 and see if you get lucky as 8 is pretty old plus there's a part of me that wonders with such a slow bus and cpu that 100T is going to make a big difference.
Kevin
Thank you for the suggestion, but that's how I collected the information for the card in the first place. The Performa 6360 didn't seem to take the card, so I popped it in to my Beige G3 running Mac OS 9.2.2 and hoped it might work on that. Same problem, however, the Apple System Profiler is much more thorough on that OS, so I was able to acquire the card's information. The reason for the 100-BaseT Ethernet, again, is not solely based on that one computer; It's the fact that I would prefer the network to run at the faster speed and with four macs currently on it, with a few more modern ones such as the iBook G3 shown below, the speed is a nice thing to have.
So, on that note, any suggestions for a PCI equivalent? Has Apple ever made any? If so, where could I find them at a reasonable (Read: Not $150) price?
Thanks again.

PowerMac 6400/300 won't recognize farallon PCI ethernet card

I have a powermac 6400/300 and I put in a farallon PCI ethernet card but can't find a driver for it. I have the same problem with the usb PCI card I put in. It is a Opti two slot card. If you know where I can get drivers for either of these please post a reply, thankyou.
PowerMac 6400/300 Mac OS 9.1.x

Farallon produced more than one pci ethernet card, and the driver you need depends on the card. Many drivers are still available, for example, this one:
http://www.macupdate.com/info.php/id/1796
I suggest you 'google', for example with "farallon ethernet drivers".
The USB card is a whole different issue, since what it needs are specific Apple extensions. If you go over to the beige G3 discussions area and search for USB extensions, the answer should come up.

NEED NEW CARD! Please help

Alright, well my dumbass roommate decided to plug in his super nintendo to my TV@nywhere card. To make a long story short, he messed something up. The computer wouldnt boot. It would get to the windows screen and freeze. I formatted, problem was no more, untill I installed the VGA drivers.
So now I cant do anythign with my screen, if I install the drivers, it wont boot.
Now I plan on just getting a new VGA card. Was looking at some nVidia products, but I am uncertain what to get. I want to spend $50 or less (eBay).
I have the MSI 651 MEGA PC. It says it has a APG 4x x1 slot on board, so I was just wondering what suggestions you guys had for a new card. Please help out if possible, thanks!

Try the second hand ATI 9600XT.

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

P6N Lots of problems please help

P6N Lots of problems please help
The setup is the following:
P4 D935 3.2gHz
P6N Diamond MS-7320 Bios 1.3V
Corsair XMS2-6400C4DHX
NX8600GT-TD512EZ/D2
Seagate Barracuda 7200 250Gb SataII 16Mb
Akasa 460W Dual Rail
Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
Any help greatly appreciated.

please, don't buy any more unneded parts. first find the problem then buy if no solutions available.
One thing I find with BIOS issues is to do a full clear.
1. disconnect the power cord from the power supply(turn switch to off if there is one.
2. hit the power switch to clear the power out of the system.
3. set the cmos jumper to clear and leave there if one is available.
4. Pull the battery.
5. carefully short out the battery connector on the motherboard to drain any power left.
6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set.
7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
Now it should hopefully power up. go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs. I just looked it up and it's suppose to run from 1.225v - 1.325v.
also, try your most generic ram you have with auto settings. the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
Let me know how this works for you.
-=Mark=-
ps. make sure everything is unplugged from the computer you don't need. just cpu, 1 stick of ram, and video. and of course keyboad and mouse. Please make a signature with all your systems specs including make and model numbers. I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.

HT2534 when i create the apple ID with the above procedure, i dont see "none" options under credit card selection, please help.

When i create the apple ID with the above procedure, i dont see "none" options under credit card selection, please help.

Apple needs people like you.

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

PCI Ethernet card problem.....please help!

Similar Messages

Maybe you are looking for