PCI express 800 firewire card not working. Why?

Hi,
I want to run a DV device for capturing video and a Lacie hard drive for storage so I bought a firewire 800 PCI express card. It does not recogize my drive or my camera. Does anyone know the score on this? If I run two drives on one bus, it's so bloody slow I can't work. So I was hoping that a 2nd bus would really help but I'm not getting anywhere with this PCI Express card. I have the Mac Book Pro 17" laptop.
Thanks!

Hello from Virginia,
What are your MBPro specs and are they compatible with the card you purchased.
I capture through the onboard FW800 port and use an Expresscard/34 card which gives me two eSata connections to my external HDs...works great.
Give us more details about the laptop and the card...make, model, compatibility...etc.
K

Similar Messages

  • X-Fi Titanium PCI Express front pannel connection not working

    <font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
    <font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?

    Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
    Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
    Best of luck and .......
    Message Edited by jmacguire on 07-06-2009 :09 PM

  • HELP! - Lumia 800 memory card not working :/

    My phone decided to go into the notorious restart loop - So following everyones advice on teh internet I performed a hard reset.
    It loads the orange sign - then the Nokia sign - then the windows mobile sign as if the phone is about to start with the noises etc... then it decides to goto a screen says
    "MEMORY CARD NOT WORKING
    Your memory card has changed, is damaged or is non-compatible.
    To fix this, turn your phone off and either remove the memory card or replace it with a new compatible card. Then reset your phone to the original factory settings.
    To learn how to reset your phone, refer to the owner's manual"
    I also get the option to make an "emergency" call or "turn off" the phone. the volume buttons also work the volume fine aswell as the option to change the phones mode from silent to vibrate or vibrate and ring.
    Tried hard reset numerous times, tried charing the phone for hours on end and trying it, tried soft resets. Basically the only options i've found.
    Just to add.... Why would a phone with no memory card slot even have a message stating that the memory card is faulty and that i could even remove or replace it???
    I hope someone manages to help me without having to cough up £50 excess to my insurance.
    Anyone come across this before?

    Sorry, it's my standard response, but your phone doesn't work. Take it back to whoever sold it to you. It's a consumer good, consumer protection rules apply.
    Your problem certainly has novelty value but if you've done the hard reset and it didn't work you're at the end of the fix it yourself stage.

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • TS4317 graphics cards not work

    video file is not working graphics card not working is their is any software that i can update. or tell me why its not working

    If you can see an image on your screen then your graphics card (Intel HD Graphics 3000) integrated into your 13" machine is working just fine.
    I'm not sure what you mean when you say that a video file isn't working... how exactly isn't it 'working' and what file format is it in?
    Clinton

  • Usb 2.0 card not working in bios

    Hi I'm hoping someone can help me here. My problem is that I have a via pci usb 2.0 card that works fine at windows startup but does not work at bios startup. See recently all my usb ports stop working. So I had to get myself the external usb card cause there ws no other way for me 2 get my ports working again. So now I am unable to enter the bios settings by pressing F10 cause my keyboard and mouse only works after windows startup logo...

    Ok  , at last , at last.
    Ok unplugged everything  , power input Usb cable all other cables .
    Plugged in the power and the input cable , still nothing .
    I then took the input cable from the back of the mac and plugged it into the keyboard , success.
    I put it all back and now its working , bizarre.

  • Sandisk extreme firewire reader not working on new MBP models(unibody))

    hey all,
    so I have the sandisk extreme firewire CF reader since 2008. It works great on my 15" Macbook Pro2.2 (C2D 2.16ghz)
    Recently(actually in march) I purchased the new thunderbolt 15" MacbookPro(2.2GHz).
    At first the firewire card reader works fine on the new MBP. But somehow in May it stopped working(running SL). The CF card wouldnt mount, in System Profile it wouldn't even display the device. Even after I installed Lion it still wouldnt work. The only way for it to work is to daisychain it onto a firewire external harddrive and hook it up to the macbookpro.
    It's super weird. I've contacted sandisk's web support(WHAT?! only web support but no phone, for such a big company?!), they said it was use the card-reader was due to power issues and told me to contact Apple to resolve the issue.
    I later on tried the card reader on numberious mac's. Turns out that most Unibody machines wont work with it.(the weird thing is, when i just got my Thunderbolt unibody, it worked perfectly fine, for a while) But back on my old Macbook Pro2,2 from 2007(which is currently running OSX 10.6.8), it's works like a champ.(going to install 10.7 Lion and see how it goes)
    And at the meantime I donno whether it's the card readers issue or not?(sandisk wouldnt replace the thing for me)
    So anyone got any experience or insight of the situation?
    thanks
    PS.
    To make things worse, Sandisk discontinued the extreme firewire reader,(they do have the expresscard reader, but the new 15" dont have a expresscard slot)
    So now we're left with those stupid slow USB2.0 card readers while the size and the speed of those flash memory cards are getting faster and bigger each day.

    I'm pretty much giving up on this issue.
    I just found a very rare new lexar fw800 reader online for $80. Hope it works.
    fun fact: the SanDisk fw card reader works on the MacPros,new MacMini's/server, even the thunderbolt display w/ the fw800.

  • X-Fi Xtreme Audio Card not work

    Hello, in my first time building a computer, I've had problems that have been solved via various forums, and I'm finally at my last problem that I need to fix. I got an X-Fi extreme audio card that isn't working properly. I know that the card isn't broken or inserted improperly, as when I test the speakers through the card (I'm using the green analog cable, plugged into the card), it works nicely. However, when I try to listen to anything else, like music, youtube, etc, I can only get sound (occasionally) through the headphone jack, which makes things sound really strange through the speakers. When I try to put headphones in (the headphone jack), they don't make any sound. Does anyone know a solution to this? I've tried going through all the settings, turning the mobo's onboard audio controller on and off, and many other things. I'm using a Abit IN9 32X MAX motherboard, Creative Sound Blaster X-Fi Xtreme Audio VARPAK 7. Channels 24-bit 96KHz PCI Express Interface Sound Card?and 32-bit Vista.

    Today you're lucky, i also have an MSI XFI Audio but it's PCIe, if your card is PCIe, here is the CD:This CD is from a user named NUJA, http://nuja.free.fr/SBXAudioPCIe.rar , contain : CREATIVE_ALCHEMY_X-FI .00.07
    Audio Console 2.40.2
    Console Launcher 2.30.32
    Creative Volume Panel 2.0.80
    driver din 03/04/2008,6.0.0.20
    This CD is better then CD from MSI, it has newer application and drivers.

  • I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

    I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?

    These prices are for the U.S.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model          Out-of-Warranty Service
    iPhone 5          $229
    iPhone 4S          $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone          $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • Firewire soundcards not working under bootcamp/windows (mbp unibody)

    I am reading a lot about firewire sound cards not working on the new unibody macbook pros.
    I am using sp3 and trying to use my konnekt6 sound card without any luck. Will apple address this issue or is there a hotfix for this?
    Best regards,,
    Mark

    I have the same problem and i have tried numeral suggestion and trik with no success.
    it seems that the firewire driver 1394.inf in the xp or vista is not fully compatible with the chipset in the mac. any solution?
    the presonus sound card is not recognized as sound card on XP, but no vista it is recognized but caused the system to crash and freeze upon plug in

  • Runtime error R6025 message after log on to Vista - Flash Card not working

    Hi
    I'm a newbie & would appreciate any advice.
    I am getting a runtime error message R6025 when I log on to Windows Vista.
    When I click out of the box I then get a message saying Toshiba Flash Card not working.
    I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
    Sorry if I sound thick
    Thanks
    Neelie

    Hi
    I found this MS knowledge base article:
    +Description of the R6025 run-time error in Visual C++\+
    http://support.microsoft.com/kb/125749
    But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
    However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
    At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
    Bye

  • My ipad camera is not working why? Help

    My ipad camera is not working, why? Please help!!

    HI Judejesalva,
      You can restore your ipad to your factory settings it could be that the camera is having an error with the camera software.

  • Hello, I just did an update and now the second Language - Hebrew - does not working. why?

    Hello, I just did an update and now the second Language - Hebrew - does not working. why?

    More information please.
    If you are on adobe cloud, download indesign that support hebrew from CC desktop. Click on the preference gear on the top right then select App language.

  • HT2731 i already make my apple id but it not working why?

    sir i make id but not working why?

    What happens when you try to use it ? When you create an account you should get a email which you will need to open and click on the 'verify now' link in it.
    If it's a different problem ... ?

Maybe you are looking for