PCI Firewire / Hub Firewire or Daisy chain Which one will be a good idea

I'm starting to run outta room for firewire
so i decided to buy a PCI firewire card
so now i wanna know if its smart to plug my drives in there so as my isight or just stay with daisy chain or buy firewire hub ?
thanks in advance
any quick answers are appreciated
stash

The Firewire PCI card i got has like a power connection port on it
I was wondering if i needed to connect it to anything or it gets enough power from the motherboard
I mean they didn't supply the cable to connect it to the power supply
and the G5 doesn't have any extra cable lying inside there to connect to it
and so far all hard drives including the isight is running smooth
Just wanna know before something happen
stash

Similar Messages

Have a G400, OS10.4.11. Need 10.5 or later to install a new printer. Which one will run best? How do I upgrade?

Have a G400, OS10.4.11. Need 10.5 or later to install a new printer.
1) Which one will run best?
2) How do I upgrade?

It's probably cheaper to buy a new printer & sell the existing on on ebay.
I have the Cannon pixma mg3120 works fine for me with mac os x 10.4.11. I am able to refill the color ink jet cartridge. Press reset + color copy button for 10 seconds.
http://www.amazon.com/Canon-MG3120-Wireless-All-In-One-5289B019/dp/B005TI2Q8M
Mac OS® X v10.4.11 to v10.6.x
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg3120
What is a G400?
You may want to post machine info.
blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the word hardware.
Leave out the serial number.
Example:
Machine Name: iMac
Machine Model: PowerMac4,1
CPU Type: PowerPC 750 (33.11)
Number Of CPUs: 1
CPU Speed: 600 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1

I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

There is no need for anyone to use 32-bit version anymore.
Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
Better support for today's hardware with larger video graphic memory and systems.
Better memory management.

File Adapter or File Transport which one will give more performance

Hi all,
File Adapter or File Transport which one will give more performance ? in OSB?
Which one to select any one did performance analysis?
Thanks
Phani

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

Same algorithm in function and procedure then which one will better?

Why pl sql function is better to computes a value instead of procedure?
If I apply same algorithm in function and procedure then which one will perform better?

It's not a matter of performance, it is more a matter of how it is going to be used.
A function can be used as an expression in an assignment or in a query.
my_var := my_func(my_param);
select my_var(my_col) from my_table;But it can just return a single value (which can be a complex value like a nested table or object or ref cursor, but still a single value.)
The procedure often is more used to perform an action that does not return anything.
execute_invoicing(my_invoice_id);Or procedures can be used if you need multiple return values.
my_proc(my_input, my_output_1, my_output_2, my_output_3);But the procedure cannot be used in an assignment expression or a select query.
Performance wise procedures and functions are completely identical. It is only a matter of what action they perform and how you are going to use them.

Which one will over right the other - DACL

If I have configured downloadable ACL on ACS group, then one of the users who is belong to same group has assign particular ACL on his profile.
Which one will be pushed to the router is it the group ACL or user ACL
Many Thanks

Update.....
I do see in ACS logs that Authentication failed for ACL where username is the ACL name sent by PIX. (#ACSACL#-IP-myACL-45e6c605).
The failure code is "DACL request from device is not acceptable"
I guess ACS is denying but WHY?

Xsd and dtd: which one will overrule

Hi,
if I have both DTD and XSD, and the rules in them are conflicting (say: the DTD indicates that an element is mandatory and the XSD is indicating that the element is optional): which one will overrule?
Kind regards

An XML document may have only either a DTD or a schema specified.

Which one will give more power C2D 2.93 vs i5 2.4

Any one can inform me which one will give more performance MBP C2D 2.93 with NVIDIA GeForce 9400M + 9600M GT with 512MB or MBP i5 2.4 with 330M 256MB
I want it for photos and movies editing ?

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

Have many duplicates, how do I tell which one will become exclamation mark?

I have a bunch of doubles, but i dont know which ones will turn into the exclaimation mark and which ones are the good ones.
Is there an easier way to tell with out having to double click on every doubled up song?

You can collect all your dead tracks together in a playlist, where they can be deleted.
Using a playlist to collect dead tracks.
Create new regular playlist – Playlist1
Select whole library and drag to Playlist1
Create new Smart Playlist with the rule: Playlist is not Playlist1
Live updating checked – after you run it, uncheck live updating or you may not be able to delete tracks.
This playlist should contain all the dead tracks
http://discussions.apple.com/message.jspa?messageID=5696793#5696793
Or you can use a Robert Jacobson script - iTunesremovenotfound at:
http://mysite.verizon.net/teridon/itunesscripts/
This will delete dead tracks.

Which one will get better performance when traversing an ArrayList, iterat

hi, everyone,
Which one will get better performance when traversing an ArrayList, iterators, or index(get(i))?
Any reply would be valuable.
Thank you in advance.

Use the iterator, or a foreach loop, which is just syntactic sugar over an iterator. The cases where there is a noticeable difference will be extremely rare. You would only use get() if you actually measured a bottleneck, changed it, re-tested, and found significant improvement. An iterator will give O(n) time for iterating over any collection. Using get() only works on Lists, and for a LinkedList, gives O(n^2).

How many firewire drives can I daisy chain on the mac mini

How many firewire g-drives can I daisy chain on my mac mini

edalexjr wrote:
How many firewire g-drives can I daisy chain on my mac mini
From personal experience, if they are bus powered portable drives,
the answer is none. For what ever reason, they are draw a lot of
power and are probably near the edge of the bus powering specs.
Then again, these were the fastest of all the portable FW drives that
I have (Iomega and Seagate being the others), which may have
something to do with it.
I had also noticed an issue with them even with USB. Plugging one
into the Mini or even a powered USB hub would be fine, but 2 would cause
both to be inaccessible, unless I used a couple of USB "Y" cables
that would distribute the power across other ports.
If they are externally powered, you could string a bunch.

2 thunderbolt displays worked fine daisy chained, moved one to work in other room, now only one will work. both work independantly or both plugged into my macbook pro.

I have 2 thunderbolt displays and have had them daisy chained for months where I only would plug one into my macbook pro 15" retina and both displays have worked great. The other day I moved one of them into the conference room, connected also a HDMI cord to a projector to do some work with staff on software design.
I brought my thunderbolt back into my office and plugged it back into the other thunderbolt dispay, then plugged the other display back into my macbook and started it up and now I can only get one to work daisy chained. They both work great independantly or if both of them are plugged into my macbook pro, but not daisy chained any longer.
Is there a setting I need to look at to maybe reset so that my macbook pro will use both thunderbolt displays daisy chained?
Thanks for anyones advice and sharing any similar issues and how you fixed the issue.

Hi there,
The first thing that I would recomend is resetting the PRAM on your portable.
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
If the issues persist, then you may need to force the device to detect displays.
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/ht5369
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
- Griff W.

2 subscriptions at the same time. Which one will b...

Hi there,
Here is my question.
I have an old 300-minute plan subcription that allows me to call brazilian lines (land lines + celphones).
I want to keep it, but I would also like to subscribe to a new 100-minute plan so I can call worldwide (over 50 countries/regions)
My question is , when I call a landline in Brazil, which plan will the minutes be deducted from ?
I'm asking that because when I call brazilian landlines, I don't want the minutes to be deducted from the 100-minute worldwide plan (which I'd use to call other countries), but from the old "Brazil" 300-minute plan.
Can someone help me out ?
Thanks.

Hi and welcome to the Skype Community,
Skype will start using the minutes from your older subscription first. So you are all set since you started with the landline only subscription.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Which one will have better career (BW+BODS) or (BO+BODS).

Hi All,
I want to know which career path will have better roadmap for next 10 years, (BW+BODS) or (BO+BODS). I have started my career with BW, and now I am planning to to learn some other SAP Module,i.e addon to BW, which will progress my career.
Can anyone suggest me that is my Idea of learning BODS will help me or not? If not please suggest me some other path..
Regards,
G S Ramanjaneyulu.

Hi Rama,
Why do you want to restrict yourself on learning on this combination. My colleagues all are BW, BODS and BO Consultants. If any project require specific, they split depends on the project or whichever they want learn more.
Nowadays, it is very common for consultants that they know two or three modules or systems.
You already know SAP BW... so learn BO next and then BODS or whichever you like.
BO is very good in Market currently on Dashboard and Analytical.
Regards
GGOPII

HKCU registry and the start up application which one will ready first

Hello guys, here is my question. When create a new user in windows8.1, and I write a service to launch my appA to do something.
and my appA will read the registry at HKCU, but failed! Then I restart appA, read the registry again, it success! I guess when the new user was created the appA was launched before the HKCU ready. Is it true？

Hi Henry,
It might be a permission issue. Windows services execute under different account which compare with desktop app. They are the following.
LocalSystem,
https://msdn.microsoft.com/en-us/library/windows/desktop/ms684190(v=vs.85).aspx
NetworkService,
https://msdn.microsoft.com/en-us/library/windows/desktop/ms684272(v=vs.85).aspx
LocalSerivce,
https://msdn.microsoft.com/en-us/library/windows/desktop/ms684188(v=vs.85).aspx
Please add log handler in appA to see the failure in details.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PCI Firewire / Hub Firewire or Daisy chain Which one will be a good idea

Similar Messages

Maybe you are looking for