PCI-GPIB does not like returning from computer power-save mode. I need to restart the application. Uggh! Customer not happy.

It seems volatile memory is lost on the PCI GPIB Card. When the system returns from power-save, I cannot get to my GPIB instruments. I have to close the application and restart it. I've tried unregistering and reregistering the gpib globals and resetting the device interfaces (reissuing the ibdev command) without luck. I am using Visual Basic 6, but I also get the Measurement and Automation Explorer to fail in the same way, so I don't think it is my development environment.

On Sat, 15 May 2004 20:23:58 -0500 (CDT), SQP Products wrote:
>PCI-GPIB does not like returning from computer power-save mode. I
>need to restart the application. Uggh! Customer not happy.
>
>It seems volatile memory is lost on the PCI GPIB Card. When the
>system returns from power-save, I cannot get to my GPIB instruments.
>I have to close the application and restart it. I've tried
>unregistering and reregistering the gpib globals and resetting the
>device interfaces (reissuing the ibdev command) without luck. I am
>using Visual Basic 6, but I also get the Measurement and Automation
>Explorer to fail in the same way, so I don't think it is my
>development environment.
Can you change your power save settings? What operating system
are you running?
Also, some BIOS's have options for power save. For example, recent
IBM's can be set to maintain power to all peripherals, or only to main
memory. Of course, you would want it to maintain power.
I suspect the GPIB board and its driver are completely unable to
handle power save operation. It probably was never considered while
it was being designed.
Aidan Grey

Similar Messages

HT1212 Restoring on a new computer that the ipod has never been synced to is not working. Old computer is broke and trying to sync to the new one is not working. Help!

Passcode has been disabled and the computer it was synced to is no longer working. We have tried to sync to the new computer and it is not possible. Exactly what are the steps to do this. All our apple products are on our account, therefore, apple support should be able to see that there is nothing "suspect" going on. It is driving me insane not being able to reset/resync, whatever it's called when your locked out.

Place the iPod in Recovery mode and connect to the computer and restore via iTunes. The iPod will be erased. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

When I return from a screen saver or a program that uses the whole screen, firefox 4b7 returns a black screen.

Any time the computer is left for a long duration of time (powers off monitors or goes into screen saver) firefox returns black and must be closed.
The same problem occurs when using a program that goes into full screen (game, etc.)

You can try to disable hardware acceleration.<br />
Tools > Options > Advanced : General: Browsing: [ ] "Use hardware acceleration when available"

Installed new harddrive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
you have a couple of options:
Do a clean install of Snow Leopard via Install DVD.
Clone your old hard drive to your new hard drive via Carbon Copy Cloner
Or click on the link below to give you a better idea.
Hope you get it sorted out.
http://pondini.org/TM/14.html

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page.

HP Officejet Pro 8500A Premium will not print docs from computer, but will print a test page. I continually get a message that the computer cannot communicate with the printer.   Not only will it not print docs, it will not print web pages using IE 11 or Google Chrome.
I've used Print and Scan Doctor, it always reports there are no issues and prints a test page even though I can't print anything else.
Each time I want to print, I must reboot the computer. After reboot I have one chance to print.   This problem started February 15, 2015.
My operating system is Windows 8.1.   I have unintalled the HP software, rebooted, then reinstalled the software:
OJ8500_A910_1315-1.exe
HP Print and Scan Doctor - HPPSdr.exe
HPSupportSolutionsFramework-11.51.0049.msi
All versions were last downloaded on April 4, 2015.
I have a home wireless network (Ubee DDW366 router). All other devices in the house will print to the 8500A printer without issues: 2 Toshiba laptops, 2 Android phones, and 1FireHD.
The desk top is installed with a Netgear Network card I don't know the model, but I had it tested by a PC Tech to confirm that the card is working.   The card and Windows 8.1 were installed on January 3, 2015.
I have run virus scans and malware scans. Each time they show there are no issues with my desktop. What kind of desktop? Specifically made to my specs from store parts. . . no brand name computer. ASUS Motherboard P6X580 Premium. Now I will probably get hacked!
I am at my wits end. And it is frustrating when I need to make a print of something and the system locks up. I often resort to screen printing to a word document to save in order to reboot. . . .but then I lose all sorts of capabilites when I salvage what I needed. Also this is a time consumer.
This printer has served us well for two years and I have expensive cartridges waiting; another two rounds of refills.
Help?
Addendum: I can scan using HP Printer Assistance. I open the HP Printer assistant, it "retrieves" info from the printer, then I select "scan a document or photo" and the printer responds.   I have no trouble with scanning.
This question was solved.
View Solution.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie . ...Where'd it go ?

video transfer from computer
         Video transfer from computer to new ipad (ret disp) shows transfering process, but it's not in video or movie . ...Where'd it go ? sync automatically downloaded some - but was a bit prejudiced and selective with content mainly all edited by me in Moviemaker (windows 7, probably the reason)
         I use technology since neanderthals roamed the planet . ....don't quite understand all the nuances . .. .So, my all things "i" (apple/mac) guru has arranged a meeting,    and I'm impatient. I know some of my videos are in several formats, etc... and I don't quite understand the differences . ...to me, it's complicated, as Alec Baldwin would say.
        Unfortunately, I'm "late" to the game metaphoricaly ( windows vs apple/mac ). I have a couple ipods and actually endorse the ijet remote device (Co. from San Diego). I have pro tools and other hi tech gear in the pro keyboards/sequencing arena where I've been writing computer music since 80's and it's evolution.

The Apple video app is very limited in what it will play. If you have multiple video formats and if they will play on an iPad, then you likely need a 3rd party vidoe app. One such is BUZZPlayer which is available in the iTunes App Store on a Mac or PC or from the App Store app on an iOS device.
You transfer the videos to 3rd party video apps using iOS File Sharing.
http://support.apple.com/kb/ht4094

HT204416 My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. Select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
3. If the above steps don't resolve the problem, please describe it in more detail.

My Andoid Devices wil not wake up my printer from Power Save Mode

I have an HP LaserJet Pro 200 color MFP M276nw istalled as a wireless network printer. I have various computers with XP and Windows 8 operating systems that wake up the printer from Power Save mode without problems. I also can print wirelessly from my Windows 8 phone. The problem arises when I try to print from my Android devices. I have installed the HP All-In-One Remote App from the Android Store and they seem to have installed correctly. They recognise the network printer, tell me that it is Power Save mode but are unable to wake it up. Can anyone help with this one please?
The Andoid version on the Tablet is 4.2.2
This question was solved.
View Solution.

Hello Jerends and thank you for your attention to my printer problem. My printer already has a fixed IP address so no need to go down that road. I managed to get around the problem by deleting the HP All in One App from my Android devices and replacing it with the HPePrint App. It's not perfect but does the job.
Thanks again.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.

How can I delete an app from launchpad, that doesn't have the little cross in the left top corner. The app isn't an App Store app. The application is also not present anymore in my application's folder in finder.
I tried to use the attached command through TERMINAL :
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps WHERE title='Help';" && killall Dock
sqlite3: Error: too many options: "DELETE from apps WHERE title='Help';"
Use -help for a list of options.
But i didn't work as I got the above error message.
best regards
Jeroen

I'm in the same boat as you -- except that I manage both a school lab (volunteer job) and macs in the enterprise (pay job). What I think we need is the Education Volume Purchasing Program
http://www.apple.com/education/volume-purchase-program/faq.html
Unfortunately this all seems a little rough around the edges -- for example, I have found updates for AppStore apps on the support.apple.com updates download site, but then when I install them via ARD they don't actually update the software. (The AppStore icons still show as needing the updates, and the version info reports the old version.) The documentation is also vague about which AppleID to use in which circumstance. I think they just haven't finished thinking through the implications of the various procedures and policies upon the various kinds of customers. When we deployed Mountain Lion on the school lab, we made an install usb and went around and installed it on each computer -- and it appears that you are on the honor system as far as paying for all of the licenses that you install. We did! But they appear to have no way to enforce it.
So far, I have only deployed 9 Lion macs in my day job, and our "solution" to the AppStore showing updates problem has been to drag the AppStore icon off of the users' docks so they don't see them!

My computer will not let me open itunes at all. It tells me that the itunes library can not be read because it was created by a newer version of itunes. What to do? Please Help Me.

My Computer will not let me open itunes at all. It tells me that the itunes libary can not be read because it was created by a newer version.

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums. Please help.

You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

How can we tell if the iphone is already fully charged in ios7? Even if its 100% the thunderbolt icon is still displayed. Not like in ios 6 that we will know when to unplug the charger because there is an indicator.

How can we tell if the iphone is already fully charged in ios7? Even if its 100% the thunderbolt icon is still displayed. Not like in ios 6 that we will know when to unplug the charger because there is an indicator.

For those who seem unfamiliar with what is being asked:
On iOS 6 and older, just because the phone reached 100%, didn't mean it was Fully Charged. The way you could tell was the lightning bolt symbol that indicated the device was charging would change to an outlet plug when the device was not only 100%, but also stopped accepting further charge. This symbol switch would occur anywhere from 5-15 minutes after the device already was displaying 100%.
Now, on iOS 7, while it still reaches 100% with that same lightning bolt charge symbol, during the 100% point, it never switches to the plug symbol to indicate the charge period is totally finished.
Can anyone confirm if there is a way to see this charge completion in iOS 7 since it appears that there is no longer a symbol for it? Is there any indication that Apple may have changed the charging display so that now it only displays 100% when it would have previously displayed that plug symbol?

I occasionally have issues waking my macbook pro up from sleep mode and have to restart the computer. The apple store replaced the sleep part but the problem is still there

I occasionally have issues waking my macbook pro up from sleep mode resulting in my need to restart the computer. I dislike all of my programs opening at once when I do get the computer started becasue it slows the cpu down. The apple store replaced the sleep part but the problem is still there. Note: i never had this problem with snow leopard

I'm not certain but my new MBA 13...when in sleep mode comes back on from a black screen when I simply click on the left mouse button. Also, one time I did a SECURE EMPTY TRASH on files that totalled more than 1GB and it took so long that the fan kept increasing in speed so I pressed on the POWER button and the MBA shut...I was able to boot up with no problem. As a rule, I now only do secured erases for trash bin data totalling 500mb or less...anything above that gets a regular erase (dump).

When i try to put my app from itunes to my iphone5 it will show on the desktop but its not on my phone

when i try to put my app from itunes to my iphone5 it will show on the desktop but its not on my phone

Do you see an error message when trying to sync the apps to the iPhone?
All you have to do is connect the iPhone to the computer, click apps above the picture of the iPhone in iTunes, choose Apps, and then select the apps that you want to sync.
See this Apple doc for more info -> iOS: Syncing with iTunes

HT203167 My movies will not download to my iPad. And I the downloads are not available for my computer. How do I cancel or get the movies to my iPad? I am on wifi and 3 g. Not happy

My movies will not download to my iPad. And the downloads are not available for my computer. How do I cancel or get the movies to my iPad? I am on wifi and 3 g. Not happy

Hi,
For all people struggling with connecting their iPad to their router, constantly getting 'Incorrect Password' even though you have entered the correct one - this may be your solution as it just resolved my issue.
In your router settings online (usually found at 198.168.1.1) change your security from WPA2 or WEP to WPA. For my iPad it for some reason only accepts WPA but now it is running without problems. Let me know if this helps.
Cheers.

PCI-GPIB does not like returning from computer power-save mode. I need to restart the application. Uggh! Customer not happy.

Similar Messages

Maybe you are looking for