PCI SATA III card on 2006 MacPro

I'd like to instal a SATA III SSD on my macpro to use it as scratch disk for photoshop and other software.
To be able to use all the speed of the ssd I wont to instal a pci sata III card... but I don't know if there are cards compatible with my 2006 macpro
Could you help my?
Thanks
Daniele

Yes, if your SSD is new SATA3 6G, and also, to not have to share, to off load, the scratch to PCIe
Mac Pro is very limited in just how much I/O bandwidth there is even with 4 internal SATA ports it is less than 1Gb, less than even 250MB/sec per port in real world.
Ideal is to max out RAM to 24GB first or instead, then dedicated scratch disk or array.
Much much more:
http://www.macperformanceguide.com

Similar Messages

  • Pcie sata III card

    I have replaced the airport card of my mid 2010 iMac with a pcie sata III card which works fine (I can even boot from it) but it takes 3 minutes now for the screen to come up and start the OS.
    I believe it is some sort of hardware initialization/negotiation that takes that time. Or maybe the system keeps ckeing for the airport card.
    Anyone got anmy idea how to solve this? Thank you in anticipation!

    Hi BDAqua,
    Thanks for your suggestion. Unfortunately that time (which seems to be almost 4 minutes) is simply missing form the system log (see below).
    2013-02-23 21:14:02 +0000 com.apple.launchd.peruser.501[121]: Throttling respawn: Will start in 10 seconds
    2013-02-23 21:14:02 +0000 shutdown[259]: reboot by John:
    2013-02-23 21:17:58 +0000 bootlog[0]: BOOT_TIME 1361654278 0
    2013-02-23 21:18:00 +0000 kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64

  • SIIG PCI SATA MAC CARD in Tiger

    Guys, I need a cheap external sata solution for my PM G5 1.6
    I found " OWC Mercury Elite Pro -AL Dual SATA Drive Enclosure" for 80 usd, and "SIIG PCI SATA MAC CARD" for 40usd.However, I heard people saying that siig pci sata-mac hangs under Tiger. Is it true?

    I have also read of problems from some with the dual drive enclosure, which is less than even their dual FW800.
    I did see this eSATA enclosure $69.
    I would stick with either Sonnet 2-ch or FirmTek/SeriTek.

  • Recommend a PCIe SATA RAID5 card?

    Hi all
    Ive been planning on putting an Areca ARC-1220 into my master2Far for a while now but decided to check this forum just in case.
    And its a good job i checked too as others seems to be having problems with these two working together.
    What I want to know is whether anyone can recommend a PCIe (either x4 or x8) SATA RAID card that plays well with a master2Far ?
    I really need RAID5......

    Quote from: Zenith on 18-August-07, 00:12:54
    Hi all
    Ive been planning on putting an Areca ARC-1220 into my master2Far for a while now but decided to check this forum just in case.
    And its a good job i checked too as others seems to be having problems with these two working together.
    What I want to know is whether anyone can recommend a PCIe (either x4 or x8) SATA RAID card that plays well with a master2Far ?
    I really need RAID5......
    should be fine, since its in QVL list:
    http://taiwan.msi.com.tw/index.php?func=prodqvl&prod_no=691&maincat_no=133&cat2_no=479&cat3_no=

  • PCIe SATA II card for San Digital RAID tower

    I have a San Digital 5 bay RAID tower that I want to use with my Mac Pro.  I used this tower previously with a G5 with very good results.  The tower came with a PCI card that is too long to fit in the PCIe slots in my Mac Pro 3.1 (it fit in the older G5 despite being told it would not work in a Mac, it worked fine with 10.4 and 10.5)
    I need to find a card to run it now.
    I attempted to run it off the unused SATA slot on the motherboard but did not recognize it in disk utility or system profiler.  Just out of curiousty, is there anything I can use the two unsed SATA spots for?
    Thanks for the help.

    I attempted to run it off the unused SATA slot on the motherboard but did not recognize it in disk utility or system profiler.
    Users who connected Drives directly to these ports have reported no difficulties under Mac OS X. Windows use requires additional configuration steps to alert Windows BIOS to use them as AHCI ports.
    OWC sells a US$20 kit with cables, and one cable is a 90-degree cable because space at the motherboard is so tight.
    http://eshop.macsales.com/item/NewerTech/MPQXES2/

  • Where can I get a replacement 250 GB SATA HD for my 2006 MacPro (UK)?

    AppleStore UK can no longer supply these. My existing HD has lasted for 6 years and if possibly I want to get an Apple replacement, or equivalent.

    Thanks Kappy.
    However I was under the impression that the maximum capacity woukd be 500 - 750GB: http://support.apple.com/kb/SP30.
    Also could you please clarify the height restriction to which you refer, as the MacPro is not a notebook/laptop but a 'tower' design.

  • Mac Pro Boot from PCIe SATA Card

    Is it possible to boot a Mac Pro from a PCIe Sata adapter? I bought a PCIe SATA III card to connect to my 64 Gb C300 SSD Drive.  The internal SATA II drives are not fast enough to take full advantage of the C300.  

    Old Thread But Great News for MAc and PC Laptop Owners I know and trust this company and just bought this for my MAc Pro it boots up the hard drive a couple ways.  In Mac hold down the option key and or once in MAc OS tell it to startup disk the external Sata (eSATA)
    Worked 100% on my Mac Pro 2008 and this works on Laptops Mac and Windows
    One catch its expensive but can go up to 6G WOOOOOOOOWs
    Only card out of  TON I have tried that will boot at least MAc OSX dunno about windows/Boot Camp but I think theoretically it will with the "Option" key wait and be patient and once you choose the sata drive maybe you can boot boot camp dunno?   Actually yes you can once you set the startup disk to the esata boot camp windows will boot!!!   Wooooooooot
    http://www.firmtek.com/seritek/seritek-6g/

  • X58 sata III

    looking for a x58 board with sataIII that is not a marvel controller.
    or can someone recommend a sataIII pcie addon card?

    Depending on your VGA configuration, it can affect the available PCI-E lanes for an add-in SATA III card in the 16X slots. If the add-in card will work in a 1X black slot, then it is not so much of an issue. All the X58 boards are configured with the SATA III Marvell controllers. Some of the newer released boards have updated Marvell controllers than my BB X's have. I personally have no problems with the Marvell, but I use nothing but SATA III WD 'spinners'.

  • SATA III 6Bb/s on Mac Pro

    Hello,
    i'm wondering if the new SATA III Drives are compatible with the Early 2009 Mac Pro .A 6Gb SATA will operate at 6 or 3GB/s speed?

    No. A good example is the 6Gb/s Crucial C300 SSD. It has a read speed of 350MB/s on a 6Gb/s host adapter. But on the built-in 3Gb/s SATA interface (like the Mac Pro internal and MacBook Pro internal), the read speed drops to 270MB/s -- or no faster than the fastest 3Gb/s SSD. The write speed never gets over 230MB/s on either interface.
    As for 6Gb/s PCIe SATA III host adapters, the two port variety is has good read speeds but the write speeds are subpar. The only 6Gb/s host adapter I've seen with a fast read and write speed is the ATTO ExpressSAS R680 adapter. With that card and an external SAS/SATA enclosure from Raidon/Stardom (ST8-U5), I measured 806MB/s with 4 SSDs and 1503MB/s with 8 SSDs.

  • PCI SATA disk causes GRUB to fail "loading Stage2..."

    Hi,
    I'm setting up a small home server using an old PC.  The motherboard is an Aopen MX46U2-GN.  It has a 40GB IDE HDD and an IDE CD-ROM drive.
    I have bought a new 1TB SATA HDD for data storage, and a PCI SATA adapter card because this motherboard has no SATA ports.  All of the hardware is working, except it is causing a strange boot problem.
    I have a working Arch installation on the IDE drive.  I can boot to this, or to the Arch liveCD or install CDROM in the optical drive.
    However, if I power up the system with the SATA drive connected to the PCI card, it detects everything but hangs with the message "GRUB loading stage2...."
    Powering up without the SATA drive connected is fine - I can then hotplug the SATA drive into the PCI card and it is detected as /dev/sdb.  However, unplugging and replugging the drive every time the machine is rebooted is impractical.
    I believe from Googling that it is related to the order in which the various drives are detected (hd0,0 etc.) and the new PCI card being detected before the IDE devices??
    Question:  How do I fix the GRUB installation so I can boot the machine with the SATA drive connected?
    Thanks in advance

    Hmm... thanks for the advice.
    I think you are correct that the new disk is recognised first and therefore becomes sda for Linux and hd0 for grub.
    Therefore, I changed the Grub menu.lst entries to hd1,0 etc. (from hd0,0).  Booted from CD, chrooted into the partition and reinstalled grub.
    Unfortunately it still doesn't work.
    Strangely, when the new SATA disk is connected, I can't even boot from the CD-ROM!    I get as far as
    Boot from CD : Loading stage2 ....
    before the system hangs.
    Again, if I hotplug the SATA disk after booting from either the CD or the old HDD, I have no problem.  Weird.

  • Someone please suggest bootable SATA-II card

    Hello,
    To whom it may concern, I have a Power Mac G5 Quad with 10GB memory and SATA capability. I am fully aware that the G5 Quads natively can only support 1.5GB/sec type drives, however I am in search of a not too expensive PCIe SATA-II card which will allow me to hook up 3.0GB/sec drives to it. I was also told that there is a substantial difference in speed between 1.5 and 3.0. Of course, coming from a G4 Dual 1.25 which used PATA, 1.5 is enough of a difference.
    However, I would like to get a nice SATA-II card which support booting into OS X. I have a 640GB green Western Digital SATA-II drive on order, but for me to take advantage of 3.0 speed, I need a nice bootable, SATA-II PCIe card.
    Can someone please recommend one for me? Also, will the G5 accept SAS drives?

    Hi Nadav,
    This and, ideally this, should do it. But it only works on a few mac pros if your heading that way.
    http://www.amug.org/amug-web/html/amug/reviews/articles/firmtek/2se2e/
    http://eshop.macsales.com/item/Firmtek/SATA2EN2/
    There are larger Firmtek cases if thats your need.
    Edit, not sure if any G5 or Mac Pro can supply that speed.
    Message was edited by: Samsara

  • Mac Mini Early 2006 Mini PCIe SATA Card Not Showing Up

    I'm trying to add a couple of SATA ports to an early 2006 mac mini by swapping out the mini PCIe AirPort for a SATA card. This is the card I'm using http://www.startech.com/Cards-Adapters/HDD-Controllers/SATA-Cards/2-Port-Mini-PC I-Express-Internal-SATA-II-Controller-Card~MPEXSATA22I, problem is it doesn't seem to show up when installed in the mac. The card works perfectly when installed in a different machine.
    The AirPort card shows up fine when swapped back, so the connector's okay. But with the SATA card installed, System Profiler says the computer doesn't contain any PCI cards. I've tried resetting the NVRAM with no success. I don't even see an entry for the device it in the ioreg output, so I'm thinking there might be a power issue. Does the mac mini supply both 3.3V and 5V to the mini PCIe connector? Is there anything special I need to do to get this card to show up?
    Thanks.

    There a long thread about this on the 123MacMini forum.  At page three, they mention drivers (you need drivers, right?) and there is a link...
    http://www.123macmini.com/forums/viewtopic.php?t=22943&postdays=0&postorder=asc& highlight=pcie+sata&start=30
    Actually, that thread might refer to a different, but similar, card.
    Don't know if it finally worked.  Be very interested to hear.  (Not sure why Apple is/has always shunned eSATA?)

  • Plz recommend a SATA-III controller card [solved]

    I only need this to control a single SSD (new vertex 4) so internal connectors would be great.  I want something that someone can endorse as problem-free.  In reading some online reviews, it seems as though some are NOT linux compatible, for example: Rosewill RC-227
    Several specifically mention Linux positive feedback:
    Koutech IO-PESA230 reported to use a Marvell 88SE9128.
    Rocket Highpoint 620 reported to use a Marvell 88SE9128.
    I'd rather take a recommendation from a fellow Archer with some experience using the hardware.  Thanks in advance.
    Last edited by graysky (2012-05-09 00:31:44)

    Don't have experience with that but I would go with something from LSI, Intel or Adaptec those are major players of controller market so they should know what they're doing. For ~50$ there is Adaptec 1220SA, guy from this thread has it: https://bbs.archlinux.org/viewtopic.php?id=98632, he's active, you can PM him The problem is Sata II, guess Vertex4 needs Sata III?
    Did you consider PCI Express SSD like Revo drive or something similar? They're pricey but you don't have to spend 50$ on controller. Don't know your price tag though.
    Cheers.

  • Boot MEGA 180 from PCI Sata card

    My onboard IDE controller has given up the ghost so I have purchased a PCI sata card to use a spare sata disk, the problem is I can't see any way to get the 180 to boot from the PCI card.  Anyone any ideas?

    Yep - I disabled the PATA ports.
    No - the card has no bios - I guess this is the problem.

  • Suggestions for: external SATA array with a PCIe SATA card??

    Seems like this would be a good idea but have no idea what hardware to be considering.
    external SATA array with a PCIe SATA card
    Thanks
    John

    Seems like this would be a good idea but have no idea
    what hardware to be considering.
    external SATA array with a PCIe SATA card
    Thanks
    John
    I purchased and internal raid kit, Rocket Raid 2320 card and Maxupgrades kit. This guy will help you get your equipment running with over the phone with personal customer service. He has external configs also.
    http://www.maxupgrades.com/istore/index.cfm?fuseaction=category.display&category _id=313&CFID=3649947&CFTOKEN=58951206
    Good Luck
    Z1&V1user

Maybe you are looking for

  • Yahoo installed a Yahoo tab in my Firefox toolbar that I DO NOT want there- how do I get rid of it for good?

    Yahoo took over my Firefox- help! About two weeks ago for some unknown reason Yahool basically took over my Firefox. All of a sudden it was my preferred search engine, Yahoo! TAB shows up in my toolbar (can't remove it) and in general it's been doing

  • Permission denied on the RedHat 6.2

    Hi, I have created the Oracle e Dba group. I have installed OAS 4.x e WebDB 2.x for Linux. I have always the error PERMISSION DENIED when I run a command (for example: tnsping, genclntsh, .....) and therefore I can not complete the installation becau

  • Windows Small Business Server 2011 Standard Media

    Hi there people, We have a dell server with windows sbs 2011 standard licence and cals and we have a problem and we need to install windows but after days of looking i cant find were the dvd is, i look everywere on the internet and i dont found anywe

  • Missing 'Application' in print dialog (Opera)

    I've installed Opera, but when I go to print, the print dialog does not show 'Opera' in the applications (third) drop down list box. Any ideas why it would go missing? THanks

  • Reset Safari option in Yosemite

    Has the full reset Safari functionality been abandoned in Yosemite.  I know that the option is not on the Safari menu.  The clear content option does not appear to be as thorough as this functionality was.