PCI-Servo-4A cards not recognized by computer

After shipping a computer with PCI-Servo-4A cards (which had been working for 2 years), my computer did not recognized several of the cards. These cards are not recognized in other working computers, and both computers recognize other "good" PCI-Servo-4A cards. There is a hardware failure on the cards (I have 10 with this problem). Has anyone repaired PCI-Servo-4A cards with this problem, and is there a "shotgun approach" to replacing a most likely culprit part?
Thanks

Hello,
You can have your cards repaired by National Instruments. Goto ni.com/ask to generate a service request number and then call in with that number to RMA your boards.
Regards,
Yusuf C.
Applications Engineering
National Instruments

Similar Messages

  • Pci-e tuner card not recognized on z68ma-ed55

    I just built a new system using the z68 motherboard and everything seems to be working except my hauppauge hvr1800 tv tuner. I was hoping maybe some of you experts might have some insight. I have already updated the bios, per msi's advice but that didn't seem to do anything. I'm using windows 7 - 64 and the device will not even show up in the device manager. I have tried both pci-e x1 slots but neither seem to recognize that a card is installed. I put the card back in my old system and windows xp recognized it right away. Is there something simple I am overlooking? I don't have any other pci-e x1 cards to test so I'm not sure how to verify the slots are bad. Any help would be greatly appreciated.

    Quote from: HU16E on 23-August-11, 12:11:43
    Have you tried it in the second PCI-E Gen2 slot?
    Added: The product description shows Windows Vista compatible. You may need to ask the manufacturer for a driver, or contact MSI Tech Support to have them check in to a possible UEFI version that will make the device compatible. http://support.msi.com/
    Yes, I've tried it in both slots and neither one seems to work. I did contact hauppauge about the tuner and they confirmed that the card is compatible in Windows 7 x64. I've been communicating with MSI's tech dept and they decided I should rma the board. I guess I'll have to wait and see what the problem is, now. Thanks, again, for the help.

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • GeForce4 TI Video Card Not Recognized Anymore?

    For about almost a year, the fan on the GeForce4 TI video card would occasionally make a grinding noise, although it has always been easily fixed by lightly sticking a finger on the fan to stop it for a second and it would go back to normal.
    However, about a month ago this little fix stopped working. The grinding noise was unbearable. After searching the Internet for a few minutes, I found out that I wasn't the only one suffering from this problem, and some even offered tips on how to replace the fan.
    I followed the steps very carefully and made sure the card was not harmed. After installing the new fan, which was very easy, I stuck it back into the Power Mac and boot it up. However the monitor didn't find a signal.
    I was glad that I installed Remote Desktop on the Power Mac so I was able to connect to it and see what's going on. I opened Apple System Profiler and noticed that the computer isn't properly recognizing the graphics card anymore! Instead of the very detailed information I'm used to seeing, this is what I saw below:
    pci10de,a:
    Type: VGA-Compatible Controller
    Bus: AGP
    Slot: SLOT-1
    Vendor: nVIDIA (0x10de)
    Device ID: 0x252
    Revision ID: 0x00a3
    I have no clue what this means as it seems like the computer still recognizes A video card. Also this also gave me the impression that the Power Mac is missing the drivers, but that's impossible as I haven't touched the software on the hard drive and nVidia drivers are part of OS X.
    If the card is broken then fine, I'll take my losses and buy a new one as I would hate to just throw the computer away since it still more than fulfill my needs. But I just hope the AGP slot isn't broken.
    Any ideas? Thanks in advance.

    Just for clarification:
    You have two systems based on the same MS-7008 mainboard, correct? Both use the same BIOS Version?
    In one system, the card is functioning, running in AGP 3.0 Mode x8 and in the other, same mainboard model, what are the symptoms of "video card not recognized" besides the AGP 2.0 Mode x4 limitation?
    I mean, if you can see the BIOS Setup, the card is putting something out on the screen, right?

  • Ipod touch not recognized by computer or ITunes

    Ipod touch is not recognized by computer or Itunes. Tried it on Windows XP OS and also Windows 7. Error message OxE8000068, unknown error, appears. Thanks for any help!

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Ipod Nano not recognized by computer (or itunes) but charging.. so connected

    worked until this am (though I think I had this once before, a couple years ago, too often follows itunes updates)
    connected to computer (win 7) this morning and it is not recognized by computer (or itunes)
    can't find it looking in Explorer
    but, it is charging so... it is connected
    have tried everything except re-installing itunes... if the computer is not seeing it, and it shows the connection when itunes isn't open...
    would that make any difference?

    diagnostic shows....
    **** Device Connectivity Tests ****
    iPodService 11.3.1.2 (x64) is currently running.
    iTunesHelper 11.3.1.2 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       Y(I removed info)
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    it looks like everything is fine, except it can't find the ipod... why?
    when I plug in a thumb drive, it recognizes that, why not the ipod?

  • Ipod not recognized by computer or self

    Ipod touch shows the apple screen but will not start, I did the hold power button then hold home button etc didnt work. the apple does stay on screen and flashes here and there but still no changes. Also, is not recognized on computer.  Help??

    sounds like a currupted iPod if its stuck like that or you Jailbreaked it.

  • IPOD Shuffle not recognized by computer, and caused a  USB power surge

    Device is not recognized by computer, and I tried the listed support recommendations.
    The problem originated when I plugged the IPOD shuffle directly into the computer USB ( not using a hub), and this caused a warning window to appear saying unknown device has caused a power surge to this port, and most be removed. Prior to this event, the IPOD shuffle has worked (with direct contact with computer usb or through a powered highspeed usb hub) without issue for nearly 1 year. Any taker's on this issue? Thanks.

    Hi JBR,
    Go to your control panel and click on Install/Uninstall programs. Scroll down and see if you have multiple versions of the ipod updater installed on your computer. If you do, then uninstall both versions. Reboot your computer.
    Next, go to the downloads page and download/install the 1-10-2006 ipod updater. Once installed, go to your start programs and select ipod updater from there. Plug in your ipod and wait a moment. If it's like mine, it'll recognize your ipod and then you can do a "restore" for a clean format.
    After that, open itunes and life should be good.
    Hope this helps!

  • Curve not recognized by computer

    hello, i baught a blackberry curve on ebay (big mistake!) it functions as phone, but is not recognized by computer. when i plug it in via USB it connects for a second and then stops, i.e. synchronization is not possible.
    i reset the device, reinstalled the DM software, spent hours trying to solve this issue nothing works - any help?
    btw, under 'manage connecetions', USB does not appear at all.
    thank you so much for any input

    prior to doing anything, you need to install the USB drivers.
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
    after you have checked everything is okay, you can do the next step, that is install the Desktop Manager.
    Moreover, ou can wipe your device so that there is no remains from the previous owner.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Charging icon appears but not recognized by computer  help!!!

    Charging icon appears but not recognized by computer and yes i have waited 30 minutes. That what the manuals said.
    Then after a while the icon dissapers and the apple loggo thing appears and i have tried to turn it on but it won't just do!!!!.And i have like a month letting my ipod connect to the computer via USB but it wont charge =S...
    What's going on???
    HELP!!!!

    Have you tried a different cable?
    This is the iTunes Mac Discussions area - you can also post in the iPod Discussions as this is an iPod question more than an iTunes question.
    Go here http://discussions.apple.com/category.jspa?categoryID=146 for iPod discussions.
    MJ

  • Ipod not recognized by computer or itunes.!please help..been trying all day

    i did 4 of the 5 R's because when i tried to restore my ipod the ipod updater 2006-03-23 wont even update because it thinks my ipod isnt plugged in. what can i do.

    I have a very simular issue. I had my 5G iPod replaced by apple and i'm very scared it may happen again. I had the 5G for 2 weeks when iTunes would take a long time to recognize it. XP MCE 2205 will recognize it immediately, but iTunes does not start automatically nor does it recognize it if i start it. Then, i got that folder with exclamation icon, this is the reason they replaced it. I got the new one today, and connected it to my USB 2.0 port as i did before. Has been working fine. All of the sudden, iTunes is not recognizing it again. Restarted the computer and then iTunes decided to recognize it, and then iTunes locked up. I waited, then i got the "long write failed" error in windows. That scared me. I had to kill iTunes. Restarted my computer while removing the 5G from the USB. Once the computer was logged on, i connected the 5G to the onboard USB1.1 and... so far so good. The USB2.0 is a 4 port PCI card. ???? Does that have anything to do with my problems? Maybe not!

  • Why are my PXI cards not recognized by Windows or MAX?

    I have a PXI-1045 chassis connected to a PC through MXI-4.  When I turn the chassis and PC on with a PXI card in slot 2, the message "Windows could not load the installer for DAQDevice.  Contact your hardware vendor for assistance." appears, and the PXI card is not recognized (it is scene by Windows as an unidentifiable PCI Devices, though I have a DAQmx installed).
    More details:
    Windows XP
    LabVIEW 8.0 installed
    TestStand 4.0 installed
    Latest DAQmx 8.XX installed
    NI Scope installed
    NI CAN installed
    MXI-4 PCI card installed in PC and recognized by Windows (as PCI-PCI bridge, and MXI-4 Device)
    I identified PXI chassis 1045 in MAX and on subsequent boot up saw that MAX complained about pxisys or some other ini file (in the chassis status area of the screen) so I configured it as 'other' then put in the PXI-resorce CD and selected the ini file for PXI-1045, MAX no longer complains about pxisys and instead says the chassis is configured properly
    If I have nothing but the PXI MXI-4 card installed in the PXI system and boot up the chassis then the PC, I get no errors
    If I have a card in slot two (I've tried PXI-6509 Industrial Digital IO, PXI-2569 Relay Module, and PXI-5102 Digital Oscilliscope) and boot the chassis then PC, the message "Windows could not load the installer for DAQDevice.  Contact your hardware vendor for assistance." shows up when Windows boots and Windows sees a PCI Device but can't identify any drivers for it. 

    Hello,
    Can you post a screenshot of the problem? Are you switching on the chassis first or the PC? Please make sure that you switch ON chassis and then boot the PC. This typically happens when you have a corrupted installation.  I would suggest downloading the latest version of driver from here and re-installing it.
    Please uninstall all the driver software from computer before installing the new software.
    http://digital.ni.com/softlib.nsf/websearch/d31d46​fffb745eca862571490053eab8
    Thanks,
    Kalyan
    Applications Engineer
    National Instruments

  • Airport Card Not Recognized on iMac DV 400 SE Slot Loading

    I just installed an airport card with adapter per Apple's instructions. It is not recognized in the Network list in System preferences. Internal Modem is listed as well as Built-in-Ethernet (with an active Internet connection). Has 10.3.9 and the latest Airport software updates.
    It was taken from a working iMac and installed in my iMac. Any idea what the problem might be?

    Will do. Thanks for the advice.
    This computer is somewhat of a cultural icon. One of the first computers configured out of the box for video editing. On a Contour stand, 130 Gb HD, 1 GM ram. Still very functional after 8 1/2 years. Looks great in the studio. Just wanted to wean it from it's ethernet connection.

  • SDHC cards not recognized​, xD cards read perfectly

    I have a problem with the card reader in my HP x18 1080ED notebook.
    When I put a 2GB xD memory card in the slot the card is recognized and shows up in My Computer and I can view the contents.
    But when I put in a SDHC card, 256MB or 8GB of 16GB, the light besides the reader lights up 8 times and then nothing happens. The card is not showing up in My Computer.
    I updated the driver, reinstalled it but no effect. I also check the cards in another computer also HP and the cards work on that computer. What is the problem can anyone help me!
    Thanks, hope you can help.

    your computer is a dv8-1080ed Correct?
    If so it may not support the SDHC type card.  I would got to the HP website and search Product information and Troubleshooting tab, in the Manuals section there should be a entry called External Media where it will list the type of cards your system supports. For the dv8-1080ed It doesn't appear that the SDHC cards are supported.

  • Graphics Card Not Recognized under Mavericks Update? MacBook Pro 8,2

    Every since I updated my macbook to mavericks, my dedicated graphics card is not recognized under system profiler or any software on the computer. I have the Macbook Pro 8,2 (late 2011) and the upgraded dedicated GeForce graphics card from the factory. My system is just running off of the integrated intel graphics at this point and there is no option to switch back in system preferences. Is my card just dead in there or did mavericks ignore it? I have no other operating systems to check. Should I just make an applestore appointment and get it looked at?

    Found the solution ... finally!
    Go to your system preferences - energy saver and then check if your Graphics setting is set to »higher performance«. Somehow the update to Mavericks change this setting to »better battery life«
    Now both cards are recognized and running ... however, watch out: since I changed that setting, my fans are going crazy! ... so I'm not sure if I should keep it. It would be much easier if one could change the setting all the time without the need to logout and login again ... well, Apple though good isn't the Holy Grail

Maybe you are looking for