PCI System Management Bus

I am running Windows 98SE. I have everything up and working, except for one little thing. The PCI Management Bus does not have a drive. My Windows disk has no drivers for it, and have no found anything online. Any and all help is welcome and appreciative.

Sorry, I was typing fast and that just slipped my mind. I'm running RS482M4-ILD board. I actually decided to read forum rules and put my specs in my signature, just like it suggests. Sorry for wasting your time like that. I'll make sure to proofread my posts from now on and make sure I put in all the information

Similar Messages

System Management Bus - error

I have MSI845PE MAX and WXP Home edition. In Device Manager ->Other devices is exclamation mark in System Management Bus. What I have do corect this problem. Thanx

Did you try to Disable, and then Renable the device by double clicking on it in Device Manager?..........Sean REILLY875

Nvidia Pci system Managment controllers error!!!

In The " system Administrator " of Win XP, appears this dispositive " Nvidia Pci bus system managment " when acces at propertis of them appears " This dispositive nos hace controllers installed ". Anywhere in the list of dispositives appear as valid. What is the problem? Thanks.

There is NO problem .
Many devices don't have spesific drivers . Still they need allocated mem/io range and to register in the pci enumeration
and bus system with vendor id class id and div. other registry settings .
Look through device manager , expand all + for all groups , if you have no devices with yellow "question mark" all is okay .

Solaris 10 on Sun Ultra 40 --PCI system error on /bus/device/function 0048h

Everytime I boot to Solaris 10 (08/07) I get the following message at the top of my screen:
PCI system error on /bus/device/function 0048h
The system boots up successfully, but I find this error to be particularly annoying. I have no third-party cards plugged into any PCI slot.
Why am I getting this error. Is the BIOS just giving me a bogus error?
Any help would be appreciated.
Thanks.
Robert

Hello,
I even got the same Problem with an Ultra 40. After powering off and on the system during the last 3 days, now i got an error mesage, "CPU3 can not be started"
cleared the CMOS and now i am back on "PCI System Error on Bus/Device/Function 0048h" the system is running with the latest 1.7 Bios update.
First of all I tried to flash the system back to an lower version but the flashsoftware seems not to support this operation have to make own boot media with the flashprogramme and flash by forced the 1.0 or 1.2 version.
regards
Monchichi

Ask the Expert: C-Series Integration with Cisco Unified Computing System Manager

Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts Vishal Mehta and Manuel Velasco.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (Cisco IMC). When a C-Series rack-mount server is integrated with Cisco UCS Manager, the IMC no longer manages the server. Instead you will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager command-line interface (CLI).
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management. The following are the connectivity modes:
Dual-wire management (shared LAN On Motherboard [LOM]): Shared LOM ports on the rack server are used exclusively for carrying management traffic.A separate cable connected to one of the ports on the Payment Card Industry Express (PCIe) card carries the data traffic.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco UCS Virtual Interface Card 1225 (VIC1225) connects one cable that can carry both data and management traffic.
Direct Connect Mode: Cisco UCS Manager Version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching and service provider.
Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000V, and virtualization. Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and CCNA® and VMware VCP certifications. Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center, under subcommunity, Unified Computing, shortly after the event. This event lasts through May 23, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Sebastian,
The different modes of connecting C-Series with UCSM come into play depending on the type of infrastructure you already have along with C-Series and NIC model.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) .
Powerful features provided by Cisco UCS Manager can be leveraged to manage C-Series server by integrating C-Series Rack-Mount Server with UCSM.
This not only gives you rich-feature set but also one management plane to operate UCS-B Series Chassis and UCS-C Series Rack Server.
You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management.
The following are the connectivity modes:
• Dual-wire Management (Shared LOM):
Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0100.html
This mode is recommended when you have C-Server which does not have or cannot support VIC 1225 card (such C-200 server)
• SingleConnect (Sideband):
Using Network Controller Sideband Interface (NC-SI), Cisco UCS VIC1225 Virtual Interface Card (VIC) connects one cable that can carry both data traffic and management traffic.
This feature is referred to as SingleConnect.
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_011.html
This most recommended Integration model when using FEX and VIC 1225 card
• Direct Connect Mode:
Cisco UCS Manager release version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
This mode will eliminate the need for FEX module as Servers are directly plugged into the base ports of Fabric Interconnect
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
Please let us know if you need more information. Thank you!
Thanks,
Vishal

Driver needed for Network controller,PCI Device,SM Bus controller

Need helpt to get the drivers for win 7 64 bit for Network controller, PCI Device,SM Bus controller, Universal Serial Bus controller, PCI Encryption/Decryption controller

Hi: For the smbus and usb 3 controllers, download and install the amd chipset drivers and reboot. http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064 PCI device: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en&os=4063&product=7174407&sw_lang= PCI Encryption/Decryption controller: Download and run this driver. Then you have to manually install it. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1 To manually install the driver, go to the device manager, click on the PCI E/D Controller needing the driver. Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder will be located in C:\SWSetup\sp66974. Make sure the Include Subfolders box is checked and the driver should install. Then reboot. Network controller...need the hardware ID for that because I don't know what model wireless card your model has. Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category. The network controller device will have a little ! mark next to it. So, find the network controller device, click on that and then click on the Details tab. Now you see a Property drop down list and it is defaulted to Device Description. Drop down on that list and select the third item (Hardware ID's). Post the top string of characters you see in the window.

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors         SYSTEM_CORE_DUMPED
       Occurred on     01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
                                                                                Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
                                                                                Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
                                                                                Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
   follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i>

SLD - Logical System Management

Hi,
We are implementing XI and we have the problem with SLD logical system management. The problem is that we use the same Logical system name (Ex. PRDclnt350) for all the systems to avoid running lengthy BDLS process when we hook our R3 systems to their respective BW systems.
Can you please suggest how we take care of this in XI -SLD landscape as it requires unique logical system names for each Business System when maintaining in SLD.
Can we have multiple SLDs and will it take care of the issue. If so can we take one of them as the master SLD and the rest as slave SLDs. What would be the best practices for synchronizing them. Any help in this regard is greatly appreciated.
Thanks and regards..
Haritha

Hi All,
We opened an OSS note with SAP regarding this. Please see the question we asked and the response we got from them regarding the SLD maintenance:
Hi,
We are on BW 3.5 and SAP ERP 5.0. We are implementing XI now. So we
need to configure SLD and register our Business systems. The problem is
we have the concept of using the same logical system for all our SAP
systems, say WRPCLNT750, when we are hooking our systems to their
respective BW systems. And in SLD, we have problem becuase of this, as
it recommends to have unique logical system name for each Business
System being registered.
We want to mention some points in here about our landscape and some of
the recommendations we got from SAP regarding this. Ours is a very big
warehouse system and in order to avoid the lengthy "BDLS" runs, SAP
recommended using the same Logical System name for all the SAP systems.
Hence we are using the same logical system name for our systems.
So now coming to our problem, can you please tell us what would be the
best practice that needs to be followed now for SLD Business System
registration. How can we overcome the hurdle of NOT having a unique
logical system name for our systems in central System Landscape
Directory.
Please let us know the solution as early as possible.
Thanks and regards..
Haritha.
The Response:
Hello Haritha
I have found some pass cases with the same question that you have,
however, the replies from developer are as below.
Logical systems cannot be duplicated within the SLD, that means one
Business System per Logical System name, both need to be unique, the SLDis working a designed here.
I would suggest you rename one of the copies of the productive system
to solve this.
My apology that I couldn't provide you a better answer for this.
Thanks & Best Regards
Andy Lam
Active Global Support - SolMan & Technology
Kindly, please let me know your suggestions.
Thanks and regards..
Haritha.

Where I can find and use "Java Desktop System Management Tools "

With Solaris 10, you not only get the Java Desktop System desktop environment, but also the Java Desktop System Management Tools and a selection of free and trial Development Tools, which are available for download only.
I found only an information about JDS release 2
but today it's release 3 already and it's said it already integrated in JDS
and above sentence it state that it already come with solaris 10?
where i can find that , where i can use it
http://docs.sun.com/app/docs/doc/817-7575/6mmsrpduj?a=view
this page said how to install but ...where I can find CD/
regards please help

Good question. It appears to have been installed with Solaris 11/06, as I have all of the packages listed here:
http://docs.sun.com/app/docs/doc/817-7575/6mmsrpdus?a=view
However, it does not appear in the Java Web Console. I tried adding it using the wcadmin command, but haven't managed to get it to run as per the docs. The documentation assumes that it is already installed and visible in the Java Web Console...
According to this documentation:
http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l6?a=view#gdjpi
An application for the Java Web Console should have a WEB-INF directory and an app.xml file. The apoc packages come with neither, so something is missing.

How to install forms 6i runtime using windows Systems Management Server?

Hi,
Our clinents are using oracle forms 5 application and we want to upgrade to forms 6i ( client /server ).
How to install oracle forms 6i and reports 6i runtime in multiple client machines
using windows systems management server instead of installing one by one manually.
Regards

Here is a quick summary on why this works...
The Problem:
The issue relies with the method and logic that MDT’s scripts use to query and validate that the proper disks, partitions and storage space reside before starting the installation of Windows.
Essentially what you have configured in the Task Sequence and the UNATTEND.xml is analyzed by the MDT scripts then a validation is completed against the hardware in which you wish to install Windows
on and if there are any errors you will be prompted with MDT Error or Warning dialogs.
The problem is that the MDT scripts use WMI to query the hard disk, partition and free space requirements for Windows, but in the case of using GPT disk, the 2nd partition (MSR) that you have to create
is hidden. The class that WMI uses for its query can’t see the MSR partition so instead of 3 partitions, it returns 2 in the query results; hence why DISK 0 PARTITION 3 doesn’t work as mentioned earlier when configured in the MDT Task Sequence.
Although the above still confuses me as to why it works with DISK 0 PARTITION 2 since the WMI query results return PARTITION IDs 0 and 1 when it should return 1 and 2…
The Windows Pre-Installation Environment however does see all 3 partitions correctly and we tried configuring in our Task Sequence to install Windows to DISK 0 and PARTITION 2 and in the UNATTEND.xml
file to install Windows to DISK 0 and PARTITION 3 but due to timing issues of the way Windows installs with MDT, did this not work for us.

N1 system manager installation faied (newer version of Java web console)

Hi,
I am trying to install Sun N1 system manager on Solaris x86 U3 + all patches. Once I run the installer I got:
N1SM Installer (version 1.3.2 on SunOS)
1. Install OS packages. [Completed]
2. Install Expect. [Completed]
3. Install IPMI tool. [Completed]
4. Install JDK 1.5. [Completed]
5. Install service provisioning components. [Completed]
6. Install OS provisioning components. [Completed]
7. Copy DHCP configuration file. [Completed]
8. Install user interface components. [Partially Run]
9. Install service container components. [Not Completed]
10. Install N1 System Manager. [Not Completed]
Failed Step: Install user interface components.
The following is a portion of the installer
log which may indicate the cause of the error.
If this does not indicate the cause of the
error, you will need to view the full log
file. More information on how to do that is
available below.
The Sun Java(TM) Web Console software already installed (version 3.0.2)
is newer than the version (3.0) you are attempting to install.
Downgrading is not supported. If you wish to run the older version,
you can install it after unintalling the currently installed version.
Error running lockhart setup: 1792
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.9327.
t. Try this step again (correct the failure before proceeding)
x. Exit
Enter selection: (t/x) x
Is there any way to continue my installation and using currently installed version of Java Web Console?

Tried removing the currently installed Java Web Console as described at http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l4?a=view
It says to simply run /usr/share/webconsole/bin/setup -u, however there is no setup binary in the listed dir.
# ls -l /usr/share/webconsole/bin/
total 396
-r-xr-xr-x 1 root sys 9995 Oct 9 08:18 smcwebserver
-r-xr-xr-x 1 root sys 6571 Oct 9 08:17 smloginmodule
-r-xr-xr-x 1 root sys 171907 Oct 9 08:17 smreg
-r-xr-xr-x 1 root sys 1456 Oct 9 08:17 smwebapp
-r-xr-xr-x 1 root sys 2917 Oct 9 08:17 wcadmin
# uname -a
SunOS host 5.10 Generic_118855-33 i86pc i386 i86pc
It seems the docs are wrong?

Org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus...

Hello,
I didn't find any answer with Google for mine problem:
The kde isn't starting, I get me error with dbus system:
org.kde.powerdevil.backlighthelper: QDBusConnection:
system D-Bus connection created before QCoreApplication. Application may
misbehave.
I use systemd. How I need to configure?
Please help me.

Agent pid 1925
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
kbuildsycoca4 running...
kbuildsycoca4(1944) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(1944) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(1944) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
No outputs have backlight property
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.6'
kded(1943)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
>>> 0x9ad590 created Job Job
>>> 0x9afc30 created JobFactory
>>> 0x9af730 created JobFactory
>>> 0x9aecd0 created Job Job
>>> 0x9ae030 created Job Job
>>> 0x9af730 deleted JobFactory
>>> 0x9afc30 deleted JobFactory
>>> 0x9ad590 deleted Job Job
>>> 0x9aecd0 deleted Job Job
>>> 0x9ae030 deleted Job Job
kded(1943) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
kded(1943) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
kwin(1966): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed"
kwin(1966): ""fsrestore2" - conversion of "0,0,0,0" to QRect failed"
kwin(1966): ""fsrestore3" - conversion of "0,0,0,0" to QRect failed"
OpenGL vendor string: nouveau
OpenGL renderer string: Gallium 0.4 on NVC3
OpenGL version string: 3.0 Mesa 8.0.4
OpenGL shading language version string: 1.30
Driver: Nouveau
GPU class: Unknown
OpenGL version: 3.0
GLSL version: 1.30
Mesa version: 8.0.4
X server version: 1.12.4
Linux kernel version: 3.5.3
Direct rendering: yes
Requires strict binding: yes
GLSL shaders: yes
Texture NPOT support: yes
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
plasma-desktop: cannot connect to X server :0
plasma-desktop(1974): Communication problem with "plasma-desktop" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Message did not receive a reply (timeout by message bus)" "
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kaccess: cannot connect to X server :0
unnamed app(1976): Communication problem with "kaccess" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Message did not receive a reply (timeout by message bus)" "
xrdb: Connection refused
xrdb: Can't open display ':0'
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kwin: Fatal IO error: client killed
kglobalaccel: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
QSocketNotifier: Invalid socket 8 and type 'Read', disabling...
Qt-subapplication: Fatal IO error: client killed
KCrash: Application 'ksmserver' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
Warning: connect() failed: : Nincs ilyen fájl vagy könyvtár
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
QThreadStorage: Thread 0x1d8fc40 exited after QThreadStorage 14 destroyed
QThreadStorage: Thread 0x1d8fc40 exited after QThreadStorage 13 destroyed
QThreadStorage: Thread 0x1d8fc40 exited after QThreadStorage 12 destroyed
kded4: Fatal IO error: client killed
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
No protocol specified
drkonqi: cannot connect to X server :0
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
Hello, this is a code, What is a problem?
Could you help me?
Please

Some folders on System Manager are not displayed correctly

Hi,
I'm using a Rockwell CLP of family ControlLogix, this CLP communicates with NI OPC Servers. I have created a Process and an IO Server on System Manager
My problem is: when I browse for TAGs on System manager, some items, who must be folders, are displayed as integers.
Same problem occurs when I use PSP Network browser, example tool.
Bruno B. Costa
Automation Engineer
Attachments:
bug.png ‏45 KB

Yes these fonts have one feature - see http://developer.java.sun.com/developer/bugParade/bugs/4279855.html
so you can check them by next way :
     GraphicsEnvironment ge = GraphicsEnvironment.
getLocalGraphicsEnvironment();
     Font[] fonts = null;
     if (ge != null) {
          fonts = ge.getAllFonts();
     for (int i=0; i < fonts.length; i++) {
          fonts.canDisplay('a');

System management software for LV apps on cRIO and Windows

Hello All,
Were I work there is a LabVIEW based project that is a distributed system. This system has a main application that can run on Linux, Windows, or cRIO targets. The main application loads "plugins" depending on what platform it is on to do platform specific things. For example, one plugin uses a DLL interface to communicate with OPC servers. Another plugin measures voltages and currents on cards in the cRIO chassis.
The system occasionally needs updates and the sites where it runs are remote. The current solution is to send a technician who installs a full upgrade. We want to move to a rolling upgrade that is automated.
We can certainly roll our own solution, but before we do that we want to investigate existing solutions.
I believe such systems are under the buzzwords System Management Software and WSUS the windows update solution is one of these.
Is there a System Management Software package that would deploy to cRIOs and Windows machines? (We have the Linux one solved already, although we might redo it if there is something really slick out there.)
Thanks!

Hi,
For cRIO's you might want to have a look at the Real-Time Target System Replication.
Christian

System Management container in Multidomain environment (same forest)

Greetings,
The scenario is the following:
1 root domain. 5 child domains. The schema was extended for Win2008 R2.
1 primary parent SCCM site (implemented in a child domain. 1 sccm server). 4 primary child SCCM sites (implemented in the 4 remaining child domains. 1 sccm server per child domain).
All of the SCCM servers are SP2 R3.
The System Management container was created in all of the child domains and the permissions was applied according to http://technet.microsoft.com/en-us/library/bb633121.aspx
In every AD site, in System Management container appears the information pertaining to its sccm server.
The questions are:
At the AD domain where is the parent sccm site, in its System Management container, all of the sccm servers must be granted permissions?
The System Management container must be created at the root domain? (and what would be the permissions?)
Thanks in advance!

Site servers write their information to the System Management container in their own domain (and only their own domain) thus you need to create the System Management container in each and every domain where there is a site server but only the site server
in that domain needs to be granted permissions in that domain.
Clients use the global catalog to query for info so the actual domain where the System Management container or objects contained therein doesn't really matter.
Jason | http://blog.configmgrftw.com

PCI System Management Bus

Similar Messages

Maybe you are looking for