PCI\VEN_1814&DEV_3090&SUBSYS_1453103C&REV_00PCI\VEN_1814&DEV_3090&SUBSYS_1453103Cnetwork drivers

PCI\VEN_1814&DEV_3090&SUBSYS_1453103C&REV_00
PCI\VEN_1814&DEV_3090&SUBSYS_1453103C
PCI\VEN_1814&DEV_3090&CC_028000
PCI\VEN_1814&DEV_3090&CC_0280
help me to find network drivers for the above hardwear info. of my wifi device
of my laptop (pavilion dv6-31120se)???
can you help me please???

Hi,
Please try this:
ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39912.exe
or this:
ftp://ftp.hp.com/pub/softpaq/sp47001-47500/sp47346.exe
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

PCI\Subsystem driver for windowed edits

Hi
I downgrade from 8 to windows 7 64 bits
would you please help me?
I need drivers for 2 devices:
1 (bluetooth)---> PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C&REV_00
2 (USB) ---> PCI\VEN_104C&DEV_8241&SUBSYS_2AE5103C&REV_02
This question was solved.
View Solution.

Hi
Ralink Bluetooth Software Driver | HP® Support
USB
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53291.exe

2000-412NR Notebook - need drivers for ethernet/networking/pci device

I have no drivers installed ethernet adapter, network adapter, or pci device (not sure what that is). I failed to locate the proper drivers on the hp web page, but I do have hardware ids for these devices:
ethernet adapter:
PCI\VEN_10EC&DEV_8136&SUBSYS_3577103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_3577103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
network adapter:
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C&REV_00
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C
PCI\VEN_1814&DEV_5390&CC_028000
PCI\VEN_1814&DEV_5390&CC_0280
pci device (what is this?):
PCI\VEN_10EC&DEV_5209&SUBSYS_3577103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_3577103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00
Please help me find these drivers! Thank you, in advance, for your time.

Hi @Lucky_S
Welcome to the HP Support Forums!
I understand that you are trying to find drivers for some of the devices on your notebook. I am happy to help you with this, but I need to know which operating system you are trying to find drivers for. Please post that information, and I will try to find what is available for you.
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Bluetooth,Ethernet controller, network controller, PCI device & Unknown devicedrivers not available

HP Pavilion g6 - 2201Ax
Windows 7 Ultimate 64 bit
Hardware IDs:
1. Bluetooth Controller
PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C&REV_00
PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C
PCI\VEN_1814&DEV_3298&CC_0D1100
PCI\VEN_1814&DEV_3298&CC_0D11
2. Ethernet Controller
PCI\VEN_10EC&DEV_8136&SUBSYS_184AEC103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_184AEC103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
3. Network Controller
PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C&REV_00
PCI\VEN_1814&DEV_3290&SUBSYS_18EC103C
PCI\VEN_1814&DEV_3290&CC_028000
PCI\VEN_1814&DEV_3290&CC_0280
4. PCI device
PCI\VEN_10EC&DEV_5229&SUBSYS_184AC103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_184AC103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
5. Unknown device
ACPI\HPQ0004
*HPQ0004
Need to install these drivers for Windows 7 64bit OS.
This question was solved.
View Solution.

Hi:
HP does not provide any support for previous operating systems on their consumer PC's which is why there are no W7 drivers for your model.
Below are the drivers you need:
1. Bluetooth Controller:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
2. Ethernet Controller:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
3. Network Controller:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
4. PCI device:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
5. Unknown device:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Did you install the AMD chipset driver to get the smbus controller and usb 3 controllers installed? First download listed.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
Do you need the graphics driver?
If so, here it is.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

Mac Pro doesn't recognize USB 3.0 PCI express card

Mac Pro doesn't recognize USB 3.0 PCI express card. Does it need specific drivers?

I did a little searching for that card. The more I looked at it the more I felt that, yes, it needs a driver, and no, one doesn't exist for the Mac. So it looks like that is a card only supported for PC's. But to be sure, if I were in your place at this point, I would contact MSI directly.

Installing Solaris 10 on Compaq Proliant 1600 with Smart 2DH PCI controller

I'm trying to put Solaris 10 on a fairly old 350 Mhz Compaq Proliant.
Compaq SMART-2DH Array controller Ver C rev 3.08
This is a PCI card
I have tried downloading HP's drivers for the Smart II controller and renaming the DU/ folders to 210 instead of 28, and the installation program will process the drivers
When it continues on to the part where you select the type of installation, it gives these errors:
/platform/i86pc/kernel/drv/smartii: undefined symbol 'eisa_nvm'
WARNING: mod_load: cannot load module 'msartii'
WARNING: forceload of drv/smartii failed
WARNING: forceload of drv/smartii failed
Then it will continue on to the GUI portion of the install and give the error about not having any available disks to install on to (check cables)
Is there any way to make Solaris 10 load these drivers? I know it doesn't support EISA, but this card is PCI. Not sure why it tries to load EISA drivers for it.
This thing also has SCSI built into the motherboard, does anyone know if Solaris 10 will support that particular controller? No idea what it's called. If it will, I'm just going to plug the hard disk cable in to that and go with it.

Has any body found a way to get Solaris 10 to install with the Smart-2DH controller? I've got a Compaq Proliant 1850R that also has that raid controller and the Solaris 10 install rejected the Solaris 8 driver.

Windows 2000 upgrade from win98--will i have problems with my pci-7344, pci 6110e & ni5411?

I am running win98 with my Labview 5.1. It running fine, but I would like to upgrade the os to windows 2000.
When I was running a check of the hardware, win2k said that the following hardware may not run:
pci-7344, pci-6110 & ni-5411.
will i need new drivers?
will i run into any problems?
any suggestions?
thanks!
Byron Golden
Allied Geophysical Labs
U of Houston

Byron,
You should not have any problems when you upgrade your OS. Depending on what driver versions you have for that hardware, you may want to go ahead an upgrade your drivers anyway, though. The drivers for these devices are all available for free from our website at:
Current Driver Versions
http://digital.ni.com/softlib.nsf/webcategories/9AD71162B755F0E786256BBC005F001A?OpenDocument&node=132060_US
Try that and let me know if you have any trouble.
Regards,
Scott R.
Applications Engineer
National Instruments

Windows 7's driver for X-fi Xtreme Audio PCI-ANY HELP PLEASE POST IN HERE

There are many topic shows Windows 7's driver of X-fi series but all of them is except X-fi Extreme Audio PCI. I hope somebody will help us about the windows 7's driver of X-fi Extreme Audio PCI in the topic, me and my friends thanks first so much...Message Edited by justin30 on 03-0-2009 0:58 PM

There are no w7 drivers for the pci version yet.
i am trying to get drivers to work but i am not ready, any progress will be posted here http://forums.creative.com/creativel...cending&page=5

Install pb with wifi pci card PC54G

Help,
in my periferal i can see the card but when i try to install MSI drivers from the CD
the install runs til the end,i click finished and then nothing !
the program WLAN utilities is installed but the drivers for the card are not there.
the card is not usable !
on my PCn.2 it installed correctly !
HELP !
my config is
PCn.1
Duron 1600
Abit NF7s
Samsung 2x 512 PC2700
Win XP Pro SP1a
PC n.2
Athlon 2200+
MSI KT4 ultra
noname 2x 256 PC2700
Win XP Pro SP1a

i flashed my motherboard with the latest avilable BIOS
changed of PCI slot (just in case)
re installed the drivers from CDRom
it still doesn't work
i think i' going to try next the technique called "kick in the case"

Apple 2Gbit PCIe card - compatilibty

Hello Ya'all:
I was wondering if there were any issues with the Apple 2Gbit PCIe card in the Mac Pro -- i.e. drivers?

If you are asking about the 2Gb Fibre-channel card, then the answer is that it is supported.
JH

Drivers for Belkin F5U220 USB PCI card

I am trying to install Belkin F5U220 USB PCI card into my G4. There are no drivers on the CD or Belkin's website. After installation, I connection Apple mouse. The mouse indicator was lit. But does not work. Where can I get drivers for this PCI card ? I read several posts here that this card worked on many systems. Wondering how it worked... Appreciate any help.

The drivers are built into the operating system.
Does the card appear in your system profiler?
When I plugged in my usb 2 card it just worked. From time to time I had to reset the pmu to get things reset properly but it has been 2 times in 2 years. (lots of 2's in my post, huh?)
Apple seems to have removed the link to the reset of the pmu so I'll give a readers digest.
Open the mac
Touch the power supply case to ground yourself
Remove the battery and check the voltage (3.6V)
Press the pmu button (3/8"square box with a bb size button in the center). Hold it down for a 3 count. Don't press it more than one time or you will mess things up
Replace the battery
Restart the mac with the usb2 card in it.
See if that helps

Driver for Xfi Soundblaster Xtreme Audio PCIe

- Hallo,
i am searching for Windows?7 x64?Drivers for the SB Xtreme Audio PCIe. I Have tested some of the drivers here, but the didn't work.
So is there any driver for it's
Nice wishes
Sebastian H.

Finally, someone in the same boat as me... I hear you [email protected]

SB PCI-64 Problems with Recordings in Ste

Hi!
I use a Soundblaster PCI-64 with Win XP and the Standard-Drivers (Driver 5..2535.0, Date: 0. July 200) .
I've connected my music instruments with the line-in-jack and everything works fine, when I'm just jamming around.
But when I try to record my stuff in STEREO, all of my recording-programs turn it into MONO. Even if I only record the left or the right channel, it always comes out in crappy (sorry!) MONO.
I think that it may be a Driver-Problem, but what do you think? Does a newer Driver exist? Where do I find it's
And if it doesn't work either: What cheap and simple Creative-Soundblaster would you recommend for reliable work with WinXP?

Take your sata drive off and you can overclock higher. There is no PCI/AGP lock so the speeds are affecting your sata drive. 210 mhz. system clock is about the limit before the sata drives start to act up.
The problem is with that particular VIA chipset. No way around it has been found to work in a practical manner.

PCIe X-Fi Titanium, no 2.18 drive

Hello, I got a PCIe X-Fi Titanium soundcard and there new drivers for the cards avaiable, but I can't find one for this new PCIe version.
Is there a driver in development or where can I download a new one for this card?

No word from Creative, no workarounds, and I don't think anyone is working on modified drivers for this.
I doubt that Creative will add this feature in any new driver releases. My guess is that we won't see it, ever.

NForce 420 + PCI video card

Okay here's my question I have a 16mb ATI All in Wonder 128 pro video card with pci bus. I want to use the features of the all in wonder but still use my nForce onboard video can this be done, with out screwing my video to hell?

Okay excellent I didn't want to throw it in until I confirmed with you guys I was pretty sure it was gonna be okay ........ I just updated my old system you see........ it was orignally a
Pentium pro 200
Matrox mystique card
64mb of edo memory
2gig HD
12x cdr
that was in 95
Anyway as of today it's a
Pentium 2 Overdrive processor running at 333mhz
256mb of edo
50gig HD
52x burner
16xdvd
64mb Geforce 2 PCI *no AGP SLOT*
and a 300watt powers suply ......
I'am still amazed at how well this machine still runs.
The geforce replaced my All in wonder that was previously there............. So all I have to do is pop the card in and set PCI video to 1st in the bios install drivers ............ And I'm good to go....

PCI\VEN_1814&DEV_3090&SUBSYS_1453103C&REV_00PCI\VEN_1814&DEV_3090&SUBSYS_1453103Cnetwork drivers

Similar Messages

Maybe you are looking for