PCI Video Interface Card for Mac Pro/FCP

Could someone please recommend a PCI Video Interface card for my Mac Pro? I'm looking for something that will capture in Beta SP, as well as support HD-SDI (bnc connector) -- does such a card exist?
Thanks!
Message was edited by: Matinicus Rock

Matrox:
http://www.matrox.com/video/en/products/mac/mxo2_family/
You are flush with options...
Shane

Similar Messages

"fire wire" video capture cards for mac pro

....Have Power Mac ver. 10.9.5 system Maverick w/ 4 MB RAM & am trying to locate hardware for:
acquiring "FIRE WIRE" video capture cards for mac pro.... ? Any suggestions....?(Just purchased Adobe CS 5 premium)

Your question doesn't make much sense.
What type of Mac Pro do you have? Is it the new black cylinder or the old style silver tower?
Firewire is built-in to the old models & the new Mac Pros can use Thunderbolt to Firewire converters to capture from Firewire sources.
Maybe like this http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
Many older cameras used Firewire for capturing, but that has been replaced by other connection types. What are you trying to capture from?

ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
from: http://en.wikipedia.org/wiki/HDMI
You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

Are there PCI thunderbolt cards for mac pro 3.1?

are there PCI thunderbolt cards for mac pro 3.1?

DCWinton wrote:
Rick
It's that last sentence I'm curious about. "However a MacPro already has much more capability already built in than Thunderbolt can add."
I'm thinking of getting a Mac Pro, but see that it doesn't seem to have Thunderbolt. I'm not sure if I care. The reason for the Mac Pro is that I'm topping out my 8gb RAM 27" iMac capacity with the volume of work going through it, and my tech tells me I'm pushing it too hard. I use it to run a small law office, but usually have about 15 apps open, with lots going on in the network in the background.
Is there any reason to wait until Apple puts Thunderbolt into the Mac Pro?
Thunderbolt will not increase the performance capability of the MacPro. It will add a bus that can be convenient, especially later on when Thunderbolt devices become more common, more mature and better supported - oh, and with more common will come less costly. From a pure performance standpoint the existing PCIe slots are much more capable and cheaper to implement. You would be giving up nothing with a current MacPro.
My opinion. Thunderbolt is really a great move forward in the long run - needed something to replace Firewire and this is it. But there is no reason to wait on Thunderbolt on MacPro - it is redundant.
Rick

Any recommendations for a new Graphics card for Mac Pro?

Any recommendations for a new Graphics card for mac pro edit in Premiere 2014 and I need to have output to a monitor my current graphics card is ATI Radeon HD Graphics 5870 1024 MB I find better for what I need?

Look at this EVGA card for the Mac

Thoughts on Inateck 4 Ports PCI-E to USB 3.0 Expansion Card for Mac Pro (Early 2008 to 2012 Late Version)

Anyone adding USB 3 ports to the older Mac Pro desktop towers?
I looked at HighPoint, Orinico and StarTek but I'm leaning towards Inateck given their recent PCI-E board update specifically for Mac Pro.
Anyone have any USB 3 recommendations or horror stories? I've got all 4 internal drive bays taken so I don't think I can easily get power to the board, so I'm hoping the internal PCI-E power will be enough for most USB 3 devices.
thanks,
Stephen

There is one that seems to be popular that works with 10.8.2 and above.
http://forums.macrumors.com/showthread.php?t=1501482&highlight=usb3+pcie

Better Graphics Card for Mac Pro !!

Hi,
I planning to upgrade my Mac with the latest Mac Pro .. so I'd like just to know ..
Which is the better performance can I get it for 3D Graphics redraw .. and Open CL feature:
A Mac Pro, have (One) NVIDIA EVGA GeForce GTX 285 1GB GDDR3 memory (Here is the Card info )
Or Mac Pro, have (3x) NVIDIA GeForce GT 120 512MB (Here is the Card info )
Or anyone can advice me another graphics card better than above for Mac Pro ?
(Except the NVIDIA Quadro FX 4800)
Thanks in Advance.

Two choices, either ATI 4870 can be bought as BTO for $200, or buy with GT120 and add GTX 285 $449 afterwards (not offered as BTO configuration at reduced price).
ATI seems favored by OS X and Apple applications but has to catch up in some areas, you know, like behind on OpenCL which will take time and work really (and Nvidia with CUDA, GPGPU and Physx has a leg up).
Or, sit on pins and needles and hope ATI 5870 or GTX 480 (bit, power guzzeler).
Apple likes to have basic card that doesn't need aux power so has to work @ 75W, and only has two 6-pin, the Fermi cards have 6 and 8-pin, unless revised models of Mac Pro have more options.
Run Windows, the GTX shines.
There has never been support for SLI, and recently even CFX was disabled as well.
Photos of the 480:
http://www.hardmac.com/news/2010/03/04/first-photos-of-the-geforce-gtx-480
Specs:
http://www.hardmac.com/news/2010/03/03/first-information-about-geforce-gtx-480
And 1.5GB RAM... http://techreport.com/discussions.x/18556

PCIe x1 video Card for Mac Pro 2006?

Hello ,
My need is a little backwards of the regular request. We have a 2006 Mac Pro (upgraded to the dual quad-core Xeon 2.33ghz E5345) we are using for LTO data backup, not the usual graphics/editing setup.
So what we have found is the original NVidia card is PCIe 8x graphics, we also have an 8x RAID card and an 8x SAS HBA for the LTO tape drives. All this is taxing the PCIe bus on this older mac. We would like to free things up a bit by putting in a video card that does not attempt to use, or at least reserve a full 8 lanes for it's own use.
If this was a newer Mac Pro then no issue... But as it is now, I am getting lockups and freezes and other issues that I am sure are related to having 3 high-bandwidth cards in the same machine.
Anyone know of a good x1 business graphics card that can work for a Mac Pro (Snow Leopard 10.6.8)
Robert

Move the cards.
Some slots can't be 16x, and one can't be 8 or 16x.
Also, the PCIe is 1.1 which means half the bandwidth of current specification.
A driver or utility ought to tell you it isn't getting bandwIdth I guess.
A PC with PCIe 2.1, or wait for next generation of motherboards that could have even more bandwidth, PCIe 3.0, to support things like ThunderBolt, SSD controllers with 8 and 16Gbit/sec in bandwidth.
Or a computer with more than 4 PCIe slots or an expansion chassis.
What could be cause?
drivers
IOKit
Rule out means trial and error of trying with just one thing changed at a time and get it working, then move on.
7300GT in slot #3 for starters.
Put your most demanding in slot #1 which is double width.
More air flow, boost the darn fan rpm and keep them @ 1200 rpm
I'd pull drive bay #4 and keep it free to allow more airflow for an 8x card
High density FBDIMMs. Odd but 4GB DIMMs run cooler and better, and in 1,1 the ideal is just a set of 4 (two on each Riser) for 4 x 2GB or 4 x 4GB.
Different SAS and RAID cards. Maybe they don't get along and have bus contention or driver conflict.
Are you using ATTO? usually a good bet.
You aren't using Mid-2010 Mac Pro and can't use 64-bit kernel, which is a shame but simplifies troubleshooting and no issue with 64-bit drivers.

Best video card for mac pro

Mac Pro Info:2x2.66 GHz Dual-Core Intel Xeon
MacPro1, 1
It says my mac pro (2006-2007) model had PCIe slots, but it doesn't mention PCI 2.0 slots. i'm looking to upgrade my video card to one of the better ones for this computer. currently i have a radeon x1900 XT 512 card. it can get clunky at times. I've been reading a lot about the Radeon HD5770, but it says it works with PCI 2.0. i've been reading that a lot of people that currently have the x1900 XT upgrade to the HD5770. but I don't want to buy an incompatible one. I just did that on my RAM and had to return it.
Does anyone know if this card will work? and will both mini display ports work as well?
or do you have a better suggestion for an upgrade?
i don't do a whole lot of gaming, but i like having a junky desktop with 30 browser windows open and 10 other programs open at the same time. i would like a card that is good for that. thanks again!

OpenGL 3.2 support15
Image quality enhancement technology
Up to 24x multi-sample and super-sample anti-aliasing modes
Adaptive anti-aliasing
16x angle independent anisotropic texture filtering
128-bit floating point HDR rendering
http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-5000/hd-5770/Pages /ati-radeon-hd-5770-overview.aspx#5
X1900 http://www.amd.com/us/products/desktop/graphics/other/Pages/x1900-specifications .aspx
not all ATI Radeon graphics cards are HDCP ready.
Complete feature set also supported in OpenGL® 2.0
Barefeats: adding the Radeon HD 5870 or 5770 to your 2006 Mac Pro won't cause it to "leap tall buildings in a single bound." But these new cards will help you "clear low buildings with a running start."
OpenGL 2.1 Released on July 2, 2006. Where is the 4.2 support, or even 3.2 support??
Apple lags by over half a decade and has not done much to modernize graphic driver support to current available standards.
OpenGL 4.2 Released on 8 August 2011[33]
Supported Cards: Nvidia GeForce 400 series, Nvidia GeForce 500 series, Nvidia GeForce 600 series, ATI Radeon HD 5000 series, AMD Radeon HD 6000 Series, AMD Radeon HD 7000 Series
Support for shaders with atomic counters and load/store/atomic read-modify-write operations to a single level of a texture.
Capturing GPU-tessellated geometry and drawing multiple instances of the result of a transform feedback to enable complex objects to be efficiently repositioned and replicated.
Support for modifying an arbitrary subset of a compressed texture, without having to re-download the whole texture to the GPU for significant performance improvements.
Support for packing multiple 8 and 16 bit values into a single 32-bit value for efficient shader processing with significantly reduced memory storage and bandwidth.
http://en.wikipedia.org/wiki/OpenGL
OpenCL 1.1 was ratified by the Khronos Group on 14 June 2010 - "Hello, that is full two years ago." http://en.wikipedia.org/wiki/OpenCL#cite_note-11
OpenCL 1.2 On 15 November 2011, the Khronos Group announced the OpenCL 1.2 specification,[13] which added significant functionality over the previous versions in terms of performance and features for parallel programming. Most notable features include:
Device partitioning: the ability to partition a device into sub-devices so that work assignments can be allocated to individual compute units. This is useful for reserving areas of the device to reduce latency for time-critical tasks.
Separate compilation and linking of objects: the functionality to compile OpenCL into external libraries for inclusion into other programs.
Enhanced image support: 1.2 adds support for 1D images and 1D/2D image arrays. Furthermore, the OpenGL sharing extensions now allow for OpenGL 1D textures and 1D/2D texture arrays to be used to create OpenCL images.
http://en.wikipedia.org/wiki/OpenCL
OpenCL is a trademark of Apple Inc.

Buying Video Card for Mac Pro

I am researching all over the net. Just trying to get a 100% answer. I was wondering if this video card works with Mac Pro
VisionTek 900244 Radeon HD 4870 512MB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFire Supported Video Card - Retail
The manufacture is different, but it is still Radeon HD 4870 512 MB GDDR5 just like the one at the Apple Store. But the Apple store is 349.00
Thanks

Well, I think it's more for a hobbyist. Like hatter said, even with the possibility of bricking a card, there is that certain satisfaction of "learning at new art", and I guess there is always the great feeling of "beating the system", so to speak.
It does pose as a good choice though budget wise, if you are willing. Only reason why I ended up buying an apple oem 4870 is that I had a $200 gift card to apple...and the mini-pcie cable shipping from ATI was too expensive (more than double the price of the cables -_-) If not for that though, I would have bought a pc card. On my 1st gen, the 1GB memory would have served me better since I'm still running PCIe 1.0 (2.5 GT/s).
Plus, buying a PC 4870 gives you the option to run crossfire if you so choose to in the future. According to someone in macrumors, Apple deliberately removed crossfire ability in the OEM 4870, rendering it impossible.
I think the apperance of bootcamp too, also makes flashing a MUCH more attractive option. However PCs being most reliable, we no longer need a separate PC to flash. Everything can be done straight in bootcamp on one machine.
Once the GTX 285 hits, expect a "race to dump GTX 285 ROM" thread to start up there after

Which dual DVI video card for Mac Pro?

We just got a Mac Pro at work with a single DVI port video card. Want to use 2 monitors, but don't want to order an incompatible card. Don't need screaming performance, just a stable setup for a sprawling desktop with some applications running low-res/low-frame-rate animation.
One Evga card that looked like about the right specs was shown on MacMall's site as 'platform: universal' but the manufacturer's site specifed Windows and Vista. Called MacMall and tech support said it wasn't supported. So, now I'm suspicious.
Anyone have a list of decent cards that will work? Would like to keep it at or under $100.

You could just add an adapter, though not everyone is happy with that, for your 2nd port on the GT120.
Could wait for Nvidia eVGA GTX 285 Mac Edition next month.
http://eshop.macsales.com/item/EGVA/01GP31080TR/
There is/was and should be 8800GT with nice specs and dual monitor support.
Barefeats is a great resource of tests and benchmarks.
This gives a good idea of what cards and what to expect:
http://barefeats.com/nehal10.html
Some discussions of 4870, GTX285 etc.
http://forums.macrumors.com/showthread.php?t=705291
http://forums.macrumors.com/showthread.php?p=7546575#post7546575
http://forums.macrumors.com/showthread.php?t=694042
And some comments on the FX 4800 and using in Windows vs OS X:
http://forums.macrumors.com/showthread.php?t=705457

Upgrading a Video Card for Mac Pro (Early 2008)

I have little experience upgrading systems hardware and I was hoping to get some input as I try to figure out a cost effective card for my 2008 mac.
What I have:
* 2 x 2.8 GHz Quad-Core Intel
* ATI Radeon HD 2600 XT
* with OSX 10.10.2 Yosemite
. . . so far I am looking at the 5770 HD to be a likely replacement if I buy the right one (some, if I'm understanding correctly, aren't compatible because they were flashed for older systems or are simply defective and so require selective shopping— hence, they were not officially supported). Also, I am unsure if OS Yosemite runs the older cards.
I work with Photoshop, Illustrator, and play games like Starcraft2 and WoW.
My question is:
Which video cards are compatible with my system and what would be the best replacement? . . . and will I have to downgrade from OS Yosemite to run certain cards?
Thanks in advance!

Hi there, welcome to the community.
My advice to you, to achieve cost effective performance, would be to use any vanilla NVIDIA graphics card. Newer versions of Mac OS X have drivers that should be compatible with the card out of the box. The only downside to using a non-mac specific card is that you wont see the boot up process, as the graphics card wont be initialized until the system is completely loaded. If this concerns you, leave your old card in one of the slower, unused slots if possible.
If you are worried about compatibility, I would recommend purchasing at Best Buy, where you can take advantage of their return policy.
For more info, check out:
How to breathe new life into a dying Mac Pro | iMore

Fastest Video Card for Mac Pro with Dual-Core Intel Xeon

Can anyone offer advise on whether I can update the video card in my Mac Pro Dual-Core Intel Xeon computer? I'm pretty sure i can but I have no idea how to upgrade and what to look for in video cards. I do know that I want something fast, hopefully faster than the current ATI Radeon X1900 XT for use with Aperture 3.0. Any suggestions are greatly appreciated.

5770 in the 2006 Mac Pro
ATI HD 5770 MC742ZM A

Pci-e usb 3.0 compatible cards for Mac Pro 2008

Anyone know a list of compatible USB 3.0 pci-x cards. Unofficial working list is what I am looking for. I have a Mac Pro early 2008 OSX Macverick
Thanks in advance for the help.

It depends. And they are PCIe.
Sonnet Allegro works fine for me, but apparently not for Drobe.
CalDigit is popular.
Do a favor, some cards require 10.8.2 or later so always include your OS.
www.macsales.com is always a good place to start your looking - if they sell it and they tend to sell what is supported and works.

HD 7970 video card for Mac Pro 2009

I just wanna buy one HD 7970 3GB for my 2009 MAC PRO. Do you guys flash the card or does 10.9.2 natively support HD 7970 diver? I've been looked at some HD 7970 cards on ebay, just confused with the power cables, some has one 6 to 6 pin and 6 to 8 pin cables. Others has two 6 to 6 pin cables. I don't know which one to buy is safe.
Here is the link:
http://www.ebay.com.au/itm/141058814...84.m1438.l2649
http://www.ebay.com.au/itm/231169142...84.m1438.l2649

yes-i agree with what kaz-k has written. As long as you get the correct power cables for your graphics card you should be okay. I think the Mac Pro has 2 6pin sockets. We don't flash the card ( thought I'm assuming it could be done elsewhere) , and Apple doesn't support anything other than a few graphics cards anyways, and it doesn't really read what's been posted here. here's the takeway: The card will probably work, however, due to the lack of a Mac EFI (basically a boot rom), you won't see a startup screen should you choose to install the card into your mac pro 2009. As the OS gets going you will see graphics. Should you need to do basic troubleshooting, eg choosing which drive to start up from
(command R on startup, I believe), the lack of a boot screen could be troublesome. If you don't care about that, by all means go ahead. 10.9.2 should have support for this card. If it helps, I bought a Sapphire 7950 for my Mac Pro 2008 (3,1) and although it doesn't run at quite full speed, it was a breeze to install, and it beat the 8800GT which was in that slot
good luck
John B

PCI Video Interface Card for Mac Pro/FCP

Similar Messages

Maybe you are looking for