PCI1422 [New] IMAQ 2.5.2; is not acquiring image;error: no ext pixel clk

WE have bought a PCI 1422 card [labVIEW 6.1, IMAQ 2.5.2,Camera Pulnix TM -1010 ] It doesn't acquire the image, shows error code " no external pixel clock". We have another PCI 1422 which is working without any problems with the same PC [ there are no settings in MAX for the camera/card which could solve this].Please suggest why this could be.

If one works and the other doens't you may have a damaged board. The following KB talks about the Timing Diagram Requirements for the IMAQ 1422, http://digital.ni.com/public.nsf/websearch/E8030D8C9B12A2C186256AA9004C75FA?OpenDocument and http://zone.ni.com/devzone/conceptd.nsf/webmain/BF9C43586430C32B86256BFB00528558?opendocument
Try updating the driver to 2.5.5,
http://digital.ni.com/softlib.nsf/websearch/42AB44A5B0854E6086256C0E004E3D87?opendocument&node=132060_US
Hope this hleps.

Similar Messages

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Admin screen will not display images - error on page

We are one step closer to a successful installation but not quite there yet. When we got to htmldb_admin the username/password boxes appear but the images do not display and it states error on page no matter what you try to do. Any suggestions?

Please see errors below from the log file. It appears that it is looking in the wrong directory for the images. Does anyone know where I can set this? I put an alias in htttp.conf but it must be pulling the info below from somewhere. Please help - I am so close (I think!!).
Fri Feb 25 10:45:51 2005] [error] [client 164.156.73.176]
[ecid: 1109346351:164.156.73.176:1660:2092:5,0] File does not exist: c:/oracle/product/10.1.0/client_2/apache/apache/images/htmldbins.small_button_right2.gif
[Fri Feb 25 10:45:51 2005] [error] [client 164.156.73.176] [ecid: 1109346351:164.156.73.176:1660:2268:5,0] File does not exist: c:/oracle/product/10.1.0/client_2/apache/apache/images/htmldbins.small_button_left2.gif
Fri Feb 25 10:14:17 2005] [error] [client 164.156.73.176] [ecid: 1109344457:164.156.73.176:1552:1708:70,0] File does not exist: c:/oracle/product/10.1.0/client_2/apache/apache/htdocs/i/htmldbins.htmldb/oracle_htmldb_logo.gif
[Fri Feb 25 10:14:17 2005] [error] [client 164.156.73.176] [ecid: 1109344457:164.156.73.176:1552:1712:74,0] File does not exist: c:/oracle/product/10.1.0/client_2/apache/apache/htdocs/i/htmldbins.htmldb/builder/1px_trans.gif

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

The head phone jack on my brand new iPod touch 5th generation is not working properly

The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

HT204053 I changed my Apple ID to reflect my new email address but it does not allow me to change it in iCloud or my iTunes account on my iPhone. Can anyone help me with this?

I recently changed my email address and have changed my Apple ID to reflect that. My itunes account will work on my PC with that new ID but my iCloud will not. Also, my iPhone will not use my new email address for either itunes or icloud. I don't know how to change it.
I read that if, on your iPhone you delete your iCloud account, you just open a new one with your new email address. Is that true, and, if you do that, do you lose your photos on your iPhone. AND, if you lose your photos on your iPhone, will they be pushed back to your iPhone if you manually sync your phone and PC?
I am hoping someone out there can help!
Thank you.

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?

I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?

You should be able to find Firefox by searching for it in the Android market on the device.

Can we add a new column in report which is not in table.

Hi All,
Can we create a new column in report which is not in table.
I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
Regards
Edited by: User_Apex on May 16, 2011 5:54 AM

Standard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
Then the adding a column in the query would be your best best...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

How can i open a link in new window (shift + Mouse Click) while not switching to the new window

I want to open a new window (shift + Mouse Click) while not switching to the newly opened window. The focus should remain on the window from where i have opened the link.

You can do that with tabs, but not with windows AFAIK.

I updated to new ios and now it is not syncing properly. How can i revert back to the previous installed version?

I updated to new ios and now it is not syncing properly. New songs are not showing up on the ipod display but when I view the device on my computer, they are in the playlist but there is a dashed circle beside the missing songs. It previously synced perfectly before the IOS update. How can i revert back to the previous installed version?

Downgrading the iOS is not supported by Apple.
Try:
Re: What does the gray dotted circle in iTunes mean?
https://discussions.apple.com/thread/4676111?tstart=0\\
Dotted circles next to songs, won't sync, red circle with square?

External video projector - How can I hook up my Mini DisplayPort to DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?

Hi
How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
Is there a DVI adaptor already for Thunderbolt?
Thanks,
JFR

The Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

To change your Apple ID, follow these steps:
Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
In the "Apple ID and Primary Email Address section," click Edit.
Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
Open the email from Apple, then click Verify Now in the email.
When the My Apple ID page opens, sign in with your renamed Apple ID.
If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your Apple ID.

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old info

How do I get iTunes to recognize a new device if I accidentally did not hit new device when I first hooked it up? I hit the button that said I wanted to back it up from my old phone. The new phone is my husbands and I don't want to back up my phone info on it. I re connected it hoping it would prompt me with the option again and it doesn't , it just shows up as a back up to my phone. How can I get it to give me that option in the beginning again

First of all, I think the first time you sync an iPod that's formatted for Windows on a Mac, the sync process reformats it for Mac. You can check what it is now by looking for the iPod with Disk Utility. If it's Mac OS Extended, it's formatted for Mac already.
Also, there is no current iPod updater app these days. iTunes handles it through the Restore button. If you are not able to use the latest iTunes because of your Mac, I can understand. The latest version of iTunes should run with 10.3.9 or later, if the hardware can handle it.
You said the battery was low so let it recharge for a while.
You should also reset the iPod. It's part of the 5Rs, which you should go through as the starting point for iPod trouble-shooting.
http://www.apple.com/support/ipod/five_rs/wheel/

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

PCI1422 [New] IMAQ 2.5.2; is not acquiring image;error: no ext pixel clk

Similar Messages

Maybe you are looking for