PCIE 16x slot don't work!!WHY??

Hi,i've just bought MSI NEO 2 FR , intel duo 6750, 2gb corsair kit 6400, 550 tecnoware with +12v 22A and an economic nvidia 6200L! when i mount the vga in the 16x pcie slot the pc don't starts,if i mount the vga in a 2-4x pcie slot the pc work normally!!what i can set to use the 16x slot,(the nearest to the cpu )thanks a lot for your help,and excuse me for my bad english!!

That is the correct slot.
As Bas said, do make sure the card is fully inserted.
Take Care,
Richard

Similar Messages

  • K9AGM3-F does not boot with PCIe 4x device in PCIe 16x slot

    K9AGM3-F motherboard does not boot with PCIe 4x Intel PRO/1000 PT dual port network interface card installed into PCIe 16x slot on motherboard. The boot process stops in BIOS screens. The motherboard works flawlessly without this NIC. K9VGM-V + Intel PRO/1000 PT boot successfully. I tried three K9AGM3-F motherboards and two Intel PRO/1000 PT NICs in different combinations, the results are always the same. It appears to be some kind of BIOS problem.

    Quote from: Fredrik Åsenius on 09-April-08, 22:52:27
    Minor point, probably irrelevant: I said you install the driver f i r s t. Then you put the physical card in. 
    The driver is completely irrelevant because the driver is a part of operating system, but as I already wrote before the boot process stops long before the OS start.
    Quote from: Fredrik Åsenius on 09-April-08, 22:52:27
    No stability issues otherwise?
    PSU is always good to know.
    The PSU is irrelevant too because the same NICs work in the PCIe 1x slot of the same motherboard with the same PSU.

  • PCI-E slot possibly not working (P67A-GD53)

    Hello all,
    New guy here. New MSI customer and everything.
    I just built a new PC today with a MSI P67A-GD53. I first plugged in the VGA (a MSI GeForce GTX 560Ti OC Twin FrozR II) to the top PCI-E slot.
    On boot, I get what I think is a VGA problem beep code (1 long - 3 short beeps). This happened with 2 different VGAs. I also tried my old XFX 8800 GT.
    The computer boots fine when I plug in the MSI VGA to the second (bottom) PCI-E slot.
    Does this mean that the top slot is broken? I guess I could try the 8800 at the same time to see if it works when 2 VGAs are plugged in, but I suspect it wont. Should I get the motherboard replaced? I am considering not getting it replaced now since I ordered it from the UK and I live in Cyprus and replacement could take a month to complete (posting overseas). Would that be a bad idea? I fear that if one part of the motherboard is faulty, it could potentially have other problems as well.

    Full hardware list
    New stuff:
    Intel Core i5-2500K 3.30GHz (Sandybridge) Socket LGA1155 Processor
    MSI P67A-GD53 Intel P67 (Socket 1155) DDR3 Motherboard ** B3 REVISION **
    Corsair Vengeance 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit (CMZ8GX3M2A1600C9)
    MSI GeForce GTX 560Ti OC Twin FrozR II 1024MB GDDR5 PCI-Express Graphics Card
    Samsung SpinPoint F3 1TB SATA-II 32MB Cache
    (pardon the verbosity: I just copy pasted the order I made recently).
    Old stuff (from previous setup):
    Corsair TX850W PSU
    Quote from: Wonkanoby on 17-August-11, 20:29:22
    are you sure you got the stand offs right under the board
    I might have missed a hole, but I definitely didn't leave any old stand-offs that might short the board from underneath.
    I'll recheck and add any missing and get back to you.

  • Runtime.exec(" find . -name *.txt -exec rm {} \; ") don't work why?

    Hi,
    I have to exec a unix command like " find . -name *.txt -exec rm {} \; " in a java program, but it don't work fine because of option -exec.
    The source is :
    String line="",lineErr="",comando="";
    try
    comando=" find . -name *.txt -exec rm {} \; ";
    process = IstanzaRuntime.exec(comando);
    inStream = process.getInputStream();
    errStream = process.getErrorStream();
    There are problems only in commands with options like -exec that permit to exec 2 commands in one .
    There is another way to write the command?
    Thanks in advance
    Lorenzo

    1. you have to use quotes around *.txt
    i.e \"*.txt\"
    or '*.txt'
    depending how you are calling the command.
    2. the directory should be specified otherwise you will be deletinfg files from the USER HOME directory.
    find . = find /USERHOME
    find ./mydir = find /USERHOME/mydir
    find /usr/tmp/mytmpdir = find /usr/tmp/mytmpdir (i.e root stem).
    3. the {} should not be a problem.

  • Commit work and wait don't work,why

    Hi All,
    I call BAPI 'BAPI_PO_CREATE1' and create PO, then commit via
    commit work and wait.
    after creating, query the new PO via
    SELECT ebelp pstyp INTO TABLE lt_ebelp
      FROM ekpo
      WHERE ebeln = p_lv_ebeln.
    but no result.
    If creating and waiting a moment, it do work.
    why, I already used 'commit work and wait' but not 'commit work'.
    thanks.
    regards.
    dou

    Okay ,first check whether po number is getting saved or not .
    If po is saving then use BAPI_TRANSACTION_COMIITT FM ..
    Now check ur select query like : Since wait upto n seconds ( This may not work)
    data : n Type i.
    n = 10.
    write the below code after  BAPI_TRANSACTIOn_COMITT.
    do n times.
    select query
    if sy-subrc eq 0.
    exit.
    endif.
    enddo.
    still document number is not coming ,testing purpose increate n as 20 and see the results.
    Thanks
    Seshu

  • USB Slots don't work on 17 inch iMac 1.9 (iSight)

    My USB slots won't work on my 17 inch iMac 1.9 (iSight). I tried them with more than one USB device, with the same results. I even tried two different keyboards and nothing. The serial number is: W85434WQTAQ

    So your USB keyboard and mouse do not work?  You can try resetting SMU (power management).  Normally, I'd suggest resetting PRAM first
    http://support.apple.com/kb/HT1379
    but that may not work if your USB keyboard is not working...  If resetting PRAM does work, I guess the USB port connected to the keyboard must be working.  If it does not help (or does not work), this is the procedure to reset SMU on iMac G5
    http://support.apple.com/kb/HT1767
    When you connect it back to power, if you were using a power strip of some type, try connecting it directly to a wall outlet by itself (at least initially).  Start it up with nothing except power cord connected, then add standard keyboard and mouse.  Note if they are working or not.  If they are working, is your problem with other USB devices also solved?

  • TS140 LSI 9300-4i4e not seen in PCIe x16 (slot #1) however works in x4 (slot #3)

    I have some TS140s (70A4001LUX 5U with i3-1225 v3 processor) that have tried installing a couple of different LSI 9300-4i43 12Gbps adapters that are not recognized when inserted into the PCIe x16 (e.g. slot #1).
    However those cards are recognoized when inserted into the x4 slow (e.g. slot #3). Have tried various LSI 9300-4i4e (cards have most recent fw and bios) in a couple of different TS140s and see the same results. Have verified other cards working ok in the x16 slot.
    In the process of updating TS140 BIOS to most recent late fall 2014 version to see if that magicly clears things up.
    Has anybody else seen this and know of a resolution other than dont use the LSI 9300 in slot #1?

    @I_am_Nivek thks for the info and ideas, I should have mentioned that the onboard RAID on the TS140 was not being used, in the BIOS/Setup, the ATA mode is set to AHCI (other options are IDE or RAID). Also as an FYI/FWIW, on the TS140 or at least the version that I have, the RAID/IDE/ATA is accessed via the "Devices" tab and then under the ATA section. I do recall seeing the "SCU" mode on a different Lenovo system that I have used, might have been a TD340 iirc.
    However with the RAID disabled (as it had been), the adapter card still does not appear.
    Regarding the boot mode, good idea, I had the TS140 in CSM which enabled both UEFI and BIOS, tried changing it to disable CSM which only allows UEFI mode. However that did not work either.
    Is there a different BIOS as well as different motherboard firmware version available vs. what I am using (see above)?

  • X-fi xtreme audio pci ret (sb790) don't working as a midi device on win 7

    windows 7 don't see subject card as a midi device.
    old sbli've 5.. didn'd work properly on win 7 so bought sb790 just for the soundfont use.
    soundfont manager failed to initialize(it's for xp,so that's maybe not ?surprising), soundfonts in sonar do not working.
    installed drivers are from creative support page. speakers works good, but as a midi device card is just don't exist.

    =}Uninstall everything you have installed (driver and software) and then try this,
    http://forums.creative.com/t5/Sound-...-LS/td-p/55334

  • I have a 2013 iMac and adobe flash and reader don't work, why.

    I cannot open PDF's and adobe flash does not work what can I do?

    I have ordered a 27inch late 2012 but your questions is puzzling.  The pdf viewer is built into "quick look" and finder can even display thumbnails of pdf documents.  Did you download a pdf viewer from adobe?  Is a different program now set to be the default for opening pdfs?  When you got the computer did you setup or migrate from an existing mac?
    If you right click or command-click on a pdf, what are the options to view it?

  • Games don't work, why wasn't it obvious

    I purchased a game on iTunes, and then found out my iPod Mini won't play it. There was no warning to me during my purchase, which really stinks. Now what?

    Right at the top of the games page is this warning.
    If you purchased a game for an unsupported iPod, you may ask for a refund using this email form.
    iPod Games Customer Support.
    Please bear in mind that any refunds will be at Apple's discretion.

  • PCIe 16x and 4x on P35 Platinum questions

    I have a P35 Platinum system with a Q6600 processor O.C. to 3.4 gHz.  I've got an 8800GTS card in the PCIe 16x slot.  I tried to add a specialized HD video capture card into the PCIe 4x slot and the system would not post.  What is the deal with the PCIe 4x and 1x slots "sharing"???  The HD capture card company (AJA) are convinced this is the problem.  I am too.  Is there ANY possible way to shut off this sharing?  Why is it there? 
    Also, every time I turn on the system, it briefly starts, stops, and then goes through the complete boot process.  What's up with that?
    Thanks for any help on these two questions.
    Stuart

    Not all PCI-E cards will be backward compatible to all PCI-E slots.
    Usually the x1/x4 PCI-E slots are meant for SATA cards, RAID cards or sound cards.
    x8 and x16 are usually meant for Video cards.
    You have to check what slot can you capture card runs on.

  • Xpath expression don't work

    i need to select two "sect" by idtry {
                // parse the XML as a W3C Document
                DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
                Document doc = builder.parse(new File("book1.xml"));
                XPath xpath = XPathFactory.newInstance().newXPath();
                String expression = "//chapter/sect[@id='secC'] | //chatpter/sect[@id='secA']"; //select two attributes (this don't works, why?)
                // obtain the element as a node.
                Node node = (Node)xpath.evaluate(expression, doc, XPathConstants.NODE);but using the same Xpath expression on xsl the expressions works
    <?xml version="1.0" encoding="UTF-8"?>
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
        <xsl:template match="/">
            <xsl:copy-of select="//chapter/sect[@id='secB']| //chapter/sect[@id='secC']"/> 
        </xsl:template>
    </xsl:stylesheet>may xml file <chapter id="chapter1">
            <sect id="secA">
                    <para id="a1">texto a1.</para>
                    <para id="a2">texto a2.</para>
                    <para id="a3">texto a3.</para>
            </sect>
            <sect id="secB">
                    <para id="b1">texto b1.</para>
                    <para id="b2">texto b2.</para>
                    <para id="b3">texto b3.</para>
            </sect>
    <sect id="secC">
                    <para id="c1">texto b1.</para>
                    <para id="c2">texto b2.</para>
                    <para id="c3">texto b3.</para>
            </sect>
    </chapter>can anyone help?

    The result of the query consists of two nodes. If you want to access both of them, use the NodeList type in place of the Node type:NodeList nodeList = (NodeList)xpath.evaluate(expression, doc, XPathConstants.NODESET);

  • Cookies Don't Work Properly

    OK, I've looked through this Forum carefully and tried everything.... Even though cookies for certain web sites (NYTimes, WatchGeeks) appear in Safari Preferenes they don't work, Why?
    My settings are as follows: Block Cookies from Third Parties, etc.; Prompt from website one time only. The NYTimes cookie indicates Cache, Cookies & Local Storage. NYT cooke indicates Cookie. But every time I go from one page to another on their site, the sign-in screen re-appears. I'm using Last Pass to sign me in and I'm good until i go to another page. Then the same thing happens. With WatchGeeks, I'm prompted to sign it every time I return to the site...same problem.
    I have deleted all cookies and started over, but that doesn't solve the problerm. Safari recognizes and stores the cookies again, but they don't work properly.This all started when I started to use  'Cookie" a cookie management program. But once this started, I uninstalled "Cookie'" and removed all traces of it, to no avail.
    What's wrong? Can I do something in Time Machine to get me back on track? I'm open to any and all suggestions. Thanks!

    You can check on the <b>about:config</b> page if the javascript.enabled pref is set to true.
    *http://kb.mozillazine.org/about:config
    You can try basic steps like these in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Javascript debugger don't work

    I love the webdevelopment tool in firefox, but my javascript debugger don't work :(
    I only can pause / unpause javascript but all other buttons have no function.
    Must I activate something in about:config or is my computer too old? (The tilt function is not supported by my graphic card)
    Thanks for answers.

    fifo85 wrote:
    > Hi,
    >
    > I have just tried the following code putting the script
    header to execute it
    > on the client side:
    > <script>
    > if(ParentValue == String("Y"))
    > {
    > EnableSubGroup();
    > }
    > else
    > {
    > DisableSubGroup();
    > }
    > </script>
    onload=function(){
    document.forms["SubForm"].elements["SubGroupDD"].disabled =
    !(ParentValue == "Y")
    This will disable SubGroup if "ParentValue" is not "Y"
    Mick
    >
    > I do not get the object expected error anymore
    > but the functions don't work, why is this?
    >
    > ----Function definition ------
    > <script type="text/javascript">
    > function EnableSubGroup()
    > {
    >
    document.forms["SubForm"].elements["SubGroupDD"].disabled='false';
    > }
    > function DisableSubGroup()
    > {
    >
    document.forms["SubForm"].elements["SubGroupDD"].disabled='true';
    > }
    > </script>
    >
    > Thanks
    >
    > Fifi
    >

  • Javascript functions don't work

    Hi,
    I have just tried the following code putting the script
    header to execute it on the client side:
    <script>
    if(ParentValue == String("Y"))
    EnableSubGroup();
    else
    DisableSubGroup();
    </script>
    I do not get the object expected error anymore
    but the functions don't work, why is this?
    ----Function definition ------
    <script type="text/javascript">
    function EnableSubGroup()
    document.forms["SubForm"].elements["SubGroupDD"].disabled='false';
    function DisableSubGroup()
    document.forms["SubForm"].elements["SubGroupDD"].disabled='true';
    </script>
    Thanks
    Fifi

    fifo85 wrote:
    > Hi,
    >
    > I have just tried the following code putting the script
    header to execute it
    > on the client side:
    > <script>
    > if(ParentValue == String("Y"))
    > {
    > EnableSubGroup();
    > }
    > else
    > {
    > DisableSubGroup();
    > }
    > </script>
    onload=function(){
    document.forms["SubForm"].elements["SubGroupDD"].disabled =
    !(ParentValue == "Y")
    This will disable SubGroup if "ParentValue" is not "Y"
    Mick
    >
    > I do not get the object expected error anymore
    > but the functions don't work, why is this?
    >
    > ----Function definition ------
    > <script type="text/javascript">
    > function EnableSubGroup()
    > {
    >
    document.forms["SubForm"].elements["SubGroupDD"].disabled='false';
    > }
    > function DisableSubGroup()
    > {
    >
    document.forms["SubForm"].elements["SubGroupDD"].disabled='true';
    > }
    > </script>
    >
    > Thanks
    >
    > Fifi
    >

Maybe you are looking for