PCIe Serial Card Stopped Working in Yosemite

I have a PCIe serial card in a Mac Pro based on the 16950 that's been working fine up until Yosemite. It's been working with the built-in Apple16x50Serial.kext driver.
With Yosemite, it looks like the driver loads okay, but no serial port appears under /dev/, and no IOBSDSerialClient for the card appears in ioreg either.
This is the same device used in the older XServe's with serial ports.
Info on my card:
Card: pci1415,9501 Type: Serial Controller Driver Installed: Yes Slot: Slot-3
pci1415,9501:
Type: Serial Controller
Driver Installed: Yes
MSI: No
Bus: PCI
Slot: Slot-3
Vendor ID: 0x1415
Device ID: 0x9501
Subsystem Vendor ID: 0x1415
Subsystem ID: 0x9501
Revision ID: 0x0000
Link Width: x1
Link Speed: 2.5 GT/s
Has anyone else encountered this issue or know of a workaround?
Thanks

Same here, although I can't even enter the shortcuts screen on my iPhone, as the Settings app crashes when I try to view the shortcuts. They are still on and work on the phone, but I can't access them to edit, etc. On the Mac, they neither show up nor work.

Similar Messages

  • Any PCIe USB cards that work with Yosemite?

    I have a late 2012 MacPro currently running OSX 10.10 (Yosemite).  I search for a PCIe card with a minimum of 4 USB ports what will work with this system (most I've found online so far indicate "incompatible with Yosemite").  Anyone aware of a card out there that does work?  I am not connecting hard drives to the card so speed is not an issue (the card could be USB 2 or 3).
    Thanks,
    Carl

    I've been using one of these
    <http://www.sonnettech.com/product/allegro_express_usb.html>
    for years in my 2008 Mac Pro.  USB 2.0
    Works fine with Yosemite.
    (Don't worry about the big power connector on the card.  It's not used for a Mac.)

  • When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

    When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
    I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3.  I want to sych with iTunes but clearly must upgrade to >10.1
    When I do, my network card no longer works on my desktop.  Please HELP!
    My spec is;
    NETWORK CARD;

    polydorus wrote:
    This isn't my thing, but the following post on this seems to have helped some people:
    http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
    That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

  • 32g sd card stopped working ,is there an answer to correctig problem ?

    32g sd card stopped working , is there an answer to correcting problem ?

    take it out and put it back in
    reformat it
    have you tried it in a pc with card reader?
    buy a new card?

  • Sdhc cards stopped working with 10.9.1 update

    sdhc cards stopped working with 10.9.1 update. I've tried multiple readers with no affect. Any ideas?

    Have you checked for an update and/or asked the developer for help?

  • After Software Update 2007-004 airport card stopped working after wakeup

    Hi,
    I have a powerbook G4 - DVI running 10.3.9. After I have installed Software Update 2007-003, when my computer goes to sleep and then wakes up, airport card stops working. I had to open the back of the computer, unplug and plug the airport card, then it starts working again. But next time the computer goes to sleep, it stops working again.
    Does anyone have a similar problem? Any work arounds?
    Thanks in advance.
    Also following is the logs from Software Update. Looks suspicious:
    Mac OS X Version 10.3.9 (Build 7W98)
    2007-04-28 18:56:03 -0400
    2007-04-28 18:56:03.190 loginwindow[181] FSResolveAliasWithMountFlags returned err = -43
    WirelessScan timeout waiting for first scan result
    WirelessScan timeout waiting for first scan result

    Deleting AppleAirPort2.kext solved the problem for some...
    http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
    While others had to rollback the AppleAirPort.kext to version...
    http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
    Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

  • Satellite A - LAN card stopped working

    I purchased my A series in April 08 and a few weeks ago the LAN card stopped working. It just won't connect and can't get emails and doesn't connect to any web pages.
    Currently have the computer working off wireless but does anyone know how to fix the LAN Card problem.

    Hi!
    Which Satellite notebook do you have exactly?
    Does the notebook recognize a LAN cable if you plug in it? Is the LAN connection enabled in Windows?
    Try to update the LAN driver and the BIOS. Both you can find on the Toshiba website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Bye

  • 5233 Memory card stopped working!

    Hi,
    I've had this phone for almost a year, it's good but there have been few problems.
    I have an 8 GB memory card, which I had to reformat recently. Today I was downloaded a theme from nokia store. But suddenly my memory card stopped working. I re -inserted it but it doesn't show on phone.
    56 MB of my phone memory and 6.5 GB of my external memory is free. I cant reformat cause memory card is not showing on phone.
    Another problem that's appeared is that while typing, if move the cursor back it goes through each alphabet instead of each word.
    3rd thing is wen I first posted here there was an option that allowed me to check response via email. Its not here anymore.
    Please help all my data is on memory card.
    Regards
    Solved!
    Go to Solution.

    Hi mtank,
    Thanks for your post.
    If the memory card can't be read in the phone try your memory card in a cardreader connected to a PC to verify if the card is readable still. If it is copy all content to the PC and format the card. Then check the card in the phone and if it is accessible copy all content back to it from the PC. If you still can't read the card on the phone replace it with a new one. You can copy the original content to it from the PC first.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • My SIM card stopped working, is that an issue to address to my phone carrier or to apple?

    My SIM card stopped working, and I have no idea why. I've had my phone for four months... Who can I bring it to to get it fixed?

    Is there an error message? What is the exact wording of that message?
    Remove the sim, clean the contacts, reseat the sim.
    Go to your wireless provider and get a new sim.
    Make an appointment at your local Apple store to have the iPhone evaluated.
         http://www.apple.com/retail/geniusbar/

  • After Service, Airport card stops working randomly on macbook pro 17" early 2009

    Hi,
    So after the last time my computer was serviced, the airport card stops working randomly on moving the screen.
    Upons restarting the computer, it sometimes says wi-fi hardware not installed. Then, if I move my machine around,
    lift it up, turn it around, place it back on the table and restart it, it works again. I don't understand this.
    And all this started happening the moment my warranty ran out. Extremely frustrating!!

    It may be possible that one of the following may be the issue:
    The internal AirPort Extreme card is not seated properly.
    The internal Wi-Fi antenna connector is not seated properly in the AirPort Extreme card.
    The internal AirPort Extreme card's connector is faulty or damaged.
    The internal AirPort Extreme card is faulty.
    To get an idea on how the Extreme card is installed, please check out the following iFixit article.

  • I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

  • Graphic card stops working, then recovers

    I recently installed the plug-in for Pixel Bender on CS5.
    When I open a jpg, and choose OilPaint, with the check box for GPU, as soon as I hit the OilPaint filter, my graphics card stops working, the screen goes black for a few seconds, then comes back on.  I get a message that the card stopped working, but recovered.
    I surmise this is a graphics card issue, or memory, or both?  I don't know for sure.
    I'm using an HP PC with 6 Gb RAM, and the card is a Nvidia GeForce 9500GT.  The drivers for this card are all up to date.
    CS5's performance settings are:  2 scratch discs (not the boot drive) with nearly a terabyte free space on one, and about 250 Gb on the other.  The program shows about 5.7 Gb of available RAM, and the preferred setting (maximum) is about 3.8 Gb.  I've got it at 3.7 Gb.
    When the card recovers, it takes several minutes before I can see the image in Photoshop again.  Then, when I try the filter again, I uncheck the GPU box, click on the OilPaint filter, and get a window that says the process timed out, and gives me 2 options:  try again or cancel.  After about 6 or 7 try-agains, the image will have the filter applied.  It takes another 5 or 6 tries to finish with "OK" and then the image shows up in the pane, in Photoshop.
    My computer has a 350W power supply, so the GeForce 9500 GT is the biggest card I can use in it.
    Is it a question of an inadequate graphics card?  Or, not enough RAM?
    I could install a new power supply for the PC, then get a different card, if that would solve the problem.  But, since I'm not sure if this is what I need to do, could I please have some suggestions on my issue with this whole thing?
    Thanks very much.
    Alan

    Thanks for those links.  I missed them, because I just had Windows search for updated drivers, and when I told it to search online, it said that the drivers were up to date.  So....well, I'm sorry I didn't check NVIDIA directly.  I appreciate your help in this.
    Anyway, I did install the updated drivers.  I rebooted the machine, just to make sure (I checked the properties of the card, and it showed the updated driver listed).
    I re-tried the OilPaint, and the card crashed, as before.  It gave me this message:
    "The NVIDIA OpenGL lost connection with the display driver and is unable to continue.  The application must close."  It then closed CS5 (Bridge remained open, though).
    It said there was an Error code: 8.
    Thanks again for assisting me on this.  What would be the next step to resolve this?
    Alan

  • G5 Dual Core 10.4 - Finally a PCIe eSATA card that works!

    Happy Holidays!
    I recently posted a few queries/complaints about FirmTek's PCIe cards used in an older Dual Core 2.0. Unfortunately my personal experience has not been a good one. Poor communication and initial refusal of RMA; the list is lengthy. After months of tedious thorough testing, I can only conclude the drivers on their web site, are incompatible with 10.4.11. But thanx to OWC, and DAT Optic, I finally found a PCIe eSATA card that works. In fact I'm using a DAT Optic 2 port card and 4 port card in total harmony with each other.
    In my opinion, the SeriTek 2ME4-E-4 design emphasis was probably geared more toward use in a Mac Pro with 10.5 and above. After two system formats, and the failure of two different FirmTek PCIe cards, that was enough for me.
    Final success came with; http://eshop.macsales.com/item/DAT+Optic/ESATAPCIE21B/ (and) http://eshop.macsales.com/item/DAT%20Optic/ESATAPCIE8/
    One BIG advantage with DAT Optic are the numerous readily available drivers directly from the Silicon Image web site. And their tech support is first class.
    All of this is good news for users of older Power Mac G5's.
    Enjoy!
    Mike

    Hi Chris
    Whatever the situation was with 10.4.10, or 10.4.11, I had to conclude that FirmTek's drivers were not doing the job for 10.4.11 - The condescending technician was basically ignoring my remark that this card just doesn't work with my set up. Neither could their 2 port card work.
    I had to argue my point repeatedly, (shouldn't have to do that).
    In any event, I'm rolling pretty good with these 2 bay OWC clearance eSATA enclosures, (got 4 of them). No bridge, just good ole eSATA connections. Sure took long enough to get to this place.
    Happy Holidays
    Mike

  • Satellite A210-1AP - video card stopped working playing Call Of Duty 4

    Hello,
    I am having problems with my video card.
    When I was playing call of duty 4 in 5 minutes my video card stops working and screen restart.
    Then it says Your video card stopped working, and problem solved.
    My video card is ATI Mobility Radeon HD 2600.

    > Then it says Your video card stopped working, and problem solved.
    And? Is it working now?
    Possibly the graphic driver hung and therefore you received this message.
    Its also possible that the GPU temperature was too high and therefore the message appeared.
    The COC 4 needs a lot of hardware resources and everything must run with full performance! Therefore there is higher heat dissipation and this can lead to graphic card issues.

  • How do I get my PCI-CAN card to work in my Dell computer?

    I am trying to get a PCI-CAN card working in a Dell GX110 computer. The computer quits right after the initial Dell spalsh screen goes away. After that point, I only get a flashing cursor in the top left corner. NI support suggested a bios upgrade, but the computer is already at the latest bios rev. When I remove the card, the computer boots fine. What do I try next?
    Lars

    The problem may be related to a specific chip ( MITE) on the PCI CAN card. Please call us at 512-795-8248 with the part no and the serial of the PCI CAN card, so that we can verify whether the CAN card may have a hardware problem and have you send the card back to us for repair or to get a replacement.

Maybe you are looking for