PCIE Slot Check error
My Mac Pro (10.5.6) is crashing. Console shows a PCIE Slot Check error.
Is this something I can fix by starting over again with a fresh Leopard installation - or is it a hardware issue?
I can't get the Tech Tools CD sold with my computer to work will not load. I ordered the new Tech Tools Pro 5 - but it still is not here.
I am stuck - a big mac crashing over and over again.
What is the PCIE slot check - and what should I do? The Mac Pro is under warranty - but the closest Apple store is 120 miles away.
Dick
I tried to load the Tech Tools disk that came with the MacPro - but it will not load. There is an update for the Tech Tools - but you have to have tech tools loaded first to use it - a catch 22.
I ordered Tech Tools Pro 5 - but it seems that they are very slow to ship.
I am waiting now with everything unplugged. What is "resetting the smu ? That is a new one to me - and I thought that I knew everything about Macs.
I am running out of ideas. I have a new 1TB HD also on order - and I had planned to put in a new HD - load a virgin set of Leopard with no other software and see what the MacPro does then.
I have 10 GB of Crucial RAM - and this machine has been working well for over 1 year. Only recently it has started to freeze and crash - and now it is constant.
Dick
Similar Messages
-
Update kernel and recieved a "Machine check error"
I was on Vacation this last weekend but was finally able to update today. Upgrade seemd fine, issued reboot command and instead of my normal reboot I was greeted with "machine check error" flashing in my upper left hand corner. Syslinux never came up. I powered off manually and pulled the battery, subsequent reboot went off without a hitch.
pacman log
[2013-09-09 18:12] [PACMAN] Running 'pacman -Syyu'
[2013-09-09 18:12] [PACMAN] synchronizing package lists
[2013-09-09 18:12] [PACMAN] starting full system upgrade
[2013-09-09 18:13] [PACMAN] upgraded curl (7.32.0-1 -> 7.32.0-2)
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'default'
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck.img
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Starting build: 3.11.0-1-ck
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck.img
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'fallback'
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck-fallback.img -S autodetect
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Starting build: 3.11.0-1-ck
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck-fallback.img
[2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-09-09 18:13] [ALPM-SCRIPTLET]
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Thank you for using http://repo-ck.com/ for your linux-ck package needs.
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Note that the following CPU optimized packages are or could be available to you:
[2013-09-09 18:13] [ALPM-SCRIPTLET] AMD : barcelona, bulldozer, kx, k10, piledriver
[2013-09-09 18:13] [ALPM-SCRIPTLET] Intel : atom, core2, haswell, ivybridge, nehalem, p4, pentm, sandybridge, haswell
[2013-09-09 18:13] [ALPM-SCRIPTLET]
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Search via group name: pacman -Sg ck-ivybridge
[2013-09-09 18:13] [ALPM-SCRIPTLET]
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Post in the repo support thread if package group is unavailable for your architecture:
[2013-09-09 18:13] [ALPM-SCRIPTLET] >>> https://bbs.archlinux.org/viewtopic.php?id=111715
[2013-09-09 18:13] [PACMAN] upgraded linux-ck-sandybridge (3.10.10-1 -> 3.11-1)
[2013-09-09 18:13] [PACMAN] upgraded linux-ck-sandybridge-headers (3.10.10-1 -> 3.11-1)
[2013-09-09 18:13] [ALPM-SCRIPTLET] rmmod: ERROR: Module nvidia is not currently loaded
[2013-09-09 18:13] [ALPM-SCRIPTLET] In order to use the new nvidia module, exit Xserver and unload it manually.
[2013-09-09 18:13] [PACMAN] upgraded nvidia-ck (325.15-5 -> 325.15-6)
[2013-09-09 18:13] [PACMAN] upgraded parallel (20130722-1 -> 20130822-1)
[2013-09-09 18:13] [PACMAN] upgraded portaudio (19_20111121-1 -> 19_20111121-2)
[2013-09-09 18:13] [PACMAN] upgraded weechat (0.4.1-2 -> 0.4.1-4)
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.11.0-1-ck (squishy@ease) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Sep 9 08:00:27 EDT 2013
[ 0.000000] Command line: initrd=/initramfs-linux-ck.img root=/dev/disk/by-uuid/0d909b36-6c1e-4652-abc6-5813297f38d5 rootflags=,relatime,data=ordered rootfstype=ext4 rw quiet vga=current elevator=noop BOOT_IMAGE=/vmlinuz-linux-ck
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bac11fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bac12000-0x00000000bad8dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bad8e000-0x00000000bad9bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad9c000-0x00000000bad9dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bad9e000-0x00000000bad9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bada0000-0x00000000bade7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bade8000-0x00000000baf2bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baf2c000-0x00000000baf91fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf92000-0x00000000baf97fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baf98000-0x00000000bafe7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafe8000-0x00000000baffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baffd000-0x00000000baffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. RC512/RC512, BIOS 06VQ.M024.20110212.SSH 02/12/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask FC0000000 write-back
[ 0.000000] 6 base 23FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbaffd max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b0d000, 0x01b0dfff] PGTABLE
[ 0.000000] BRK [0x01b0e000, 0x01b0efff] PGTABLE
[ 0.000000] BRK [0x01b0f000, 0x01b0ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fc00000-0x23fdfffff]
[ 0.000000] [mem 0x23fc00000-0x23fdfffff] page 2M
[ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fbfffff]
[ 0.000000] [mem 0x23c000000-0x23fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbac11fff]
[ 0.000000] [mem 0x40200000-0xbabfffff] page 2M
[ 0.000000] [mem 0xbac00000-0xbac11fff] page 4k
[ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
[ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbad8e000-0xbad9bfff]
[ 0.000000] [mem 0xbad8e000-0xbad9bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbad9e000-0xbad9ffff]
[ 0.000000] [mem 0xbad9e000-0xbad9ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbade8000-0xbaf2bfff]
[ 0.000000] [mem 0xbade8000-0xbaf2bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbaf92000-0xbaf97fff]
[ 0.000000] [mem 0xbaf92000-0xbaf97fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbafe8000-0xbaffcfff]
[ 0.000000] [mem 0xbafe8000-0xbaffcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x1fd18000-0x1fffefff]
[ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 00000000baffee18 0006C (v01 SECCSD LH43STAR 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000baf9bd98 000F4 (v04 SECCSD LH43STAR 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xBAFE5E40/0x00000000BAFE5D40, using 32 (20130517/tbfadt-522)
[ 0.000000] ACPI: DSDT 00000000baf84018 0866F (v01 SECCSD LH43STAR 00000000 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000bafe5e40 00040
[ 0.000000] ACPI: APIC 00000000baffdf18 000CC (v02 SECCSD LH43STAR 06222004 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000bafe6d18 00038 (v01 SECCSD LH43STAR 06222004 AMI. 00000003)
[ 0.000000] ACPI: SLIC 00000000baf9cc18 00176 (v01 SECCSD LH43STAR 06222004 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000bafe6c98 0003C (v01 SECCSD LH43STAR 06222004 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000baf91018 00A1D (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000baf90018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000baf9a018 00D80 (v01 SgRef SgTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000baf98018 011E8 (v01 OptRef OptTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbac11fff]
[ 0.000000] node 0: [mem 0xbad8e000-0xbad9bfff]
[ 0.000000] node 0: [mem 0xbad9e000-0xbad9ffff]
[ 0.000000] node 0: [mem 0xbade8000-0xbaf2bfff]
[ 0.000000] node 0: [mem 0xbaf92000-0xbaf97fff]
[ 0.000000] node 0: [mem 0xbafe8000-0xbaffcfff]
[ 0.000000] node 0: [mem 0x100000000-0x23fdfffff]
[ 0.000000] On node 0 totalpages: 2074398
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 157 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 760193 pages, LIFO batch:31
[ 0.000000] Normal zone: 20472 pages used for memmap
[ 0.000000] Normal zone: 1310208 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbac12000-0xbad8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbad9c000-0xbad9dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbada0000-0xbade7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf2c000-0xbaf91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf98000-0xbafe7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaffd000-0xbaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s84096 r8192 d22400 u131072
[ 0.000000] pcpu-alloc: s84096 r8192 d22400 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041826
[ 0.000000] Kernel command line: initrd=/initramfs-linux-ck.img root=/dev/disk/by-uuid/0d909b36-6c1e-4652-abc6-5813297f38d5 rootflags=,relatime,data=ordered rootfstype=ext4 rw quiet vga=current elevator=noop BOOT_IMAGE=/vmlinuz-linux-ck
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8071168K/8297592K available (4912K kernel code, 725K rwdata, 1676K rodata, 1104K init, 1260K bss, 226424K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:1192 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1995.468 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.22 BogoMIPS (lpj=6651560)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000051] Security Framework initialized
[ 0.000058] AppArmor: AppArmor disabled by boot time parameter
[ 0.000069] Mount-cache hash table entries: 256
[ 0.000253] Initializing cgroup subsys memory
[ 0.000263] Initializing cgroup subsys devices
[ 0.000265] Initializing cgroup subsys freezer
[ 0.000267] Initializing cgroup subsys net_cls
[ 0.000268] Initializing cgroup subsys blkio
[ 0.000270] Initializing cgroup subsys bfqio
[ 0.000294] CPU: Physical Processor ID: 0
[ 0.000295] CPU: Processor Core ID: 0
[ 0.000300] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000303] mce: CPU supports 9 MCE banks
[ 0.000318] CPU0: Thermal monitoring enabled (TM1)
[ 0.000330] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.000467] Freeing SMP alternatives memory: 20K (ffffffff819cb000 - ffffffff819d0000)
[ 0.001938] ACPI: Core revision 20130517
[ 0.008675] ACPI: All ACPI Tables successfully acquired
[ 0.016462] ftrace: allocating 19779 entries in 78 pages
[ 0.027603] Switched APIC routing to physical flat.
[ 0.028009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061003] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
[ 0.061011] TSC deadline timer enabled
[ 0.061026] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.061034] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.061036] ... version: 3
[ 0.061037] ... bit width: 48
[ 0.061038] ... generic registers: 4
[ 0.061040] ... value mask: 0000ffffffffffff
[ 0.061041] ... max period: 0000ffffffffffff
[ 0.061042] ... fixed-purpose events: 3
[ 0.061043] ... event mask: 000000070000000f
[ 0.084503] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.071127] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
[ 0.164288] Brought up 8 CPUs
[ 0.164293] smpboot: Total of 8 processors activated (31940.80 BogoMIPS)
[ 0.172724] devtmpfs: initialized
[ 0.174171] PM: Registering ACPI NVS region [mem 0xbaf2c000-0xbaf91fff] (417792 bytes)
[ 0.174179] PM: Registering ACPI NVS region [mem 0xbaf98000-0xbafe7fff] (327680 bytes)
[ 0.175128] RTC time: 1:14:39, date: 09/10/13
[ 0.175188] NET: Registered protocol family 16
[ 0.175350] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.175353] ACPI: bus type PCI registered
[ 0.175355] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.175429] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.175432] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.185354] PCI: Using configuration type 1 for base access
[ 0.186084] bio: create slab <bio-0> at 0
[ 0.186285] ACPI: Added _OSI(Module Device)
[ 0.186287] ACPI: Added _OSI(Processor Device)
[ 0.186289] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.186291] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.187915] ACPI: EC: Look up EC in DSDT
[ 0.189513] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.239236] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.241431] ACPI: SSDT 00000000badba718 00661 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.241847] ACPI: Dynamic OEM Table Load:
[ 0.241850] ACPI: SSDT (null) 00661 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.252823] ACPI: SSDT 00000000badbba98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.253271] ACPI: Dynamic OEM Table Load:
[ 0.253273] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.266019] ACPI: SSDT 00000000badb9d98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.266428] ACPI: Dynamic OEM Table Load:
[ 0.266430] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 1.207371] ACPI: Interpreter enabled
[ 1.207386] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 1.207404] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.207406] ACPI: Using IOAPIC for interrupt routing
[ 1.207438] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.207580] ACPI: No dock devices found.
[ 1.221274] ACPI: Power Resource [FN00] (off)
[ 1.221369] ACPI: Power Resource [FN01] (off)
[ 1.222064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.222103] \_SB_.PCI0:_OSC invalid UUID
[ 1.222105] _OSC request data:1 8 0
[ 1.222659] PCI host bridge to bus 0000:00
[ 1.222663] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.222665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.222668] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.222670] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.222672] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.222674] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.222676] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.222678] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.222680] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.222682] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.222684] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 1.222686] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.222695] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.222797] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 1.222833] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.222921] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 1.222933] pci 0000:00:02.0: reg 0x10: [mem 0xf5400000-0xf57fffff 64bit]
[ 1.222941] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.222951] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
[ 1.223070] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.223097] pci 0000:00:16.0: reg 0x10: [mem 0xf760a000-0xf760a00f 64bit]
[ 1.223179] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.223280] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.223304] pci 0000:00:1a.0: reg 0x10: [mem 0xf7608000-0xf76083ff]
[ 1.223402] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.223495] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.223514] pci 0000:00:1b.0: reg 0x10: [mem 0xf7600000-0xf7603fff 64bit]
[ 1.223588] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.223678] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.223764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.223823] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.223866] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.223952] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.224010] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.224050] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.224135] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.224238] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.224262] pci 0000:00:1d.0: reg 0x10: [mem 0xf7607000-0xf76073ff]
[ 1.224360] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.224451] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 1.224646] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.224668] pci 0000:00:1f.2: reg 0x10: [io 0xe0b0-0xe0b7]
[ 1.224677] pci 0000:00:1f.2: reg 0x14: [io 0xe0a0-0xe0a3]
[ 1.224686] pci 0000:00:1f.2: reg 0x18: [io 0xe090-0xe097]
[ 1.224695] pci 0000:00:1f.2: reg 0x1c: [io 0xe080-0xe083]
[ 1.224704] pci 0000:00:1f.2: reg 0x20: [io 0xe060-0xe07f]
[ 1.224714] pci 0000:00:1f.2: reg 0x24: [mem 0xf7606000-0xf76067ff]
[ 1.224763] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.224847] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.224866] pci 0000:00:1f.3: reg 0x10: [mem 0xf7605000-0xf76050ff 64bit]
[ 1.224889] pci 0000:00:1f.3: reg 0x20: [io 0xe040-0xe05f]
[ 1.225036] pci 0000:01:00.0: [10de:0dec] type 00 class 0x030200
[ 1.225046] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
[ 1.225055] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.225065] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 1.225072] pci 0000:01:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 1.225079] pci 0000:01:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref]
[ 1.232978] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.232986] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.232994] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.233003] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 1.233136] pci 0000:02:00.0: [8086:0087] type 00 class 0x028000
[ 1.233183] pci 0000:02:00.0: reg 0x10: [mem 0xf6c00000-0xf6c01fff 64bit]
[ 1.233407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.243003] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.243013] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.243022] pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf75fffff]
[ 1.243037] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe40fffff 64bit pref]
[ 1.243204] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 1.243274] pci 0000:03:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 1.243396] pci 0000:03:00.0: reg 0x18: [mem 0xe2c04000-0xe2c04fff 64bit pref]
[ 1.243467] pci 0000:03:00.0: reg 0x20: [mem 0xe2c00000-0xe2c03fff 64bit pref]
[ 1.243797] pci 0000:03:00.0: supports D1 D2
[ 1.243799] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.253026] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.253036] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 1.253045] pci 0000:00:1c.3: bridge window [mem 0xf6200000-0xf6bfffff]
[ 1.253060] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe35fffff 64bit pref]
[ 1.253163] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 1.253193] pci 0000:04:00.0: reg 0x10: [mem 0xf5800000-0xf5801fff 64bit]
[ 1.253333] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.263010] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 1.263020] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 1.263029] pci 0000:00:1c.4: bridge window [mem 0xf5800000-0xf61fffff]
[ 1.263043] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[ 1.263086] pci_bus 0000:00: on NUMA node 0
[ 1.263130] \_SB_.PCI0:_OSC invalid UUID
[ 1.263131] _OSC request data:1 1f 0
[ 1.263135] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1.263137] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1.263659] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.263721] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.263779] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.263838] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 1.263896] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.263956] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.264015] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[ 1.264073] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[ 1.264724] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 1.264732] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.264797] Found 1 acpi root devices
[ 1.264842] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.264936] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.264940] vgaarb: loaded
[ 1.264941] vgaarb: bridge control possible 0000:00:02.0
[ 1.264981] PCI: Using ACPI for IRQ routing
[ 1.266623] PCI: pci_cache_line_size set to 64 bytes
[ 1.266695] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 1.266697] e820: reserve RAM buffer [mem 0xbac12000-0xbbffffff]
[ 1.266700] e820: reserve RAM buffer [mem 0xbad9c000-0xbbffffff]
[ 1.266702] e820: reserve RAM buffer [mem 0xbada0000-0xbbffffff]
[ 1.266705] e820: reserve RAM buffer [mem 0xbaf2c000-0xbbffffff]
[ 1.266706] e820: reserve RAM buffer [mem 0xbaf98000-0xbbffffff]
[ 1.266708] e820: reserve RAM buffer [mem 0xbaffd000-0xbbffffff]
[ 1.266710] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[ 1.266803] NetLabel: Initializing
[ 1.266805] NetLabel: domain hash size = 128
[ 1.266806] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.266821] NetLabel: unlabeled traffic allowed by default
[ 1.266851] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.266857] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.268893] Switched to clocksource hpet
[ 1.273524] pnp: PnP ACPI init
[ 1.273541] ACPI: bus type PNP registered
[ 1.273643] system 00:00: [io 0x06a4] has been reserved
[ 1.273646] system 00:00: [io 0x06a0] has been reserved
[ 1.273650] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.273660] pnp 00:01: [dma 4]
[ 1.273681] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.273705] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.273820] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.273850] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.273897] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.273900] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.273902] system 00:05: [io 0xffff] has been reserved
[ 1.273904] system 00:05: [io 0xffff] has been reserved
[ 1.273907] system 00:05: [io 0x0400-0x0453] could not be reserved
[ 1.273909] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.273911] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.273913] system 00:05: [io 0x0a00-0x0a03] has been reserved
[ 1.273915] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.273918] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.273966] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.274009] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.274013] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.274065] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.274118] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 1.274348] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.274351] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 1.274353] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.274355] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.274358] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.274360] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.274362] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.274364] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.274367] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.274369] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.274372] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 1.274375] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.274919] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 1.274921] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 1.274924] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.274936] pnp: PnP ACPI: found 12 devices
[ 1.274937] ACPI: bus type PNP unregistered
[ 1.281089] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.281093] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.281097] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.281100] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 1.281104] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 1.281108] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.281114] pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf75fffff]
[ 1.281118] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe40fffff 64bit pref]
[ 1.281125] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 1.281129] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 1.281135] pci 0000:00:1c.3: bridge window [mem 0xf6200000-0xf6bfffff]
[ 1.281140] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe35fffff 64bit pref]
[ 1.281147] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 1.281150] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 1.281156] pci 0000:00:1c.4: bridge window [mem 0xf5800000-0xf61fffff]
[ 1.281161] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[ 1.281460] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.281462] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.281464] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.281466] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.281468] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.281470] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.281472] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.281474] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.281476] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.281478] pci_bus 0000:00: resource 13 [mem 0xbfa00000-0xfeafffff]
[ 1.281480] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.281482] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.281484] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf50fffff]
[ 1.281486] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 1.281488] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.281490] pci_bus 0000:02: resource 1 [mem 0xf6c00000-0xf75fffff]
[ 1.281492] pci_bus 0000:02: resource 2 [mem 0xe3700000-0xe40fffff 64bit pref]
[ 1.281494] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.281496] pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf6bfffff]
[ 1.281498] pci_bus 0000:03: resource 2 [mem 0xe2c00000-0xe35fffff 64bit pref]
[ 1.281500] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 1.281502] pci_bus 0000:04: resource 1 [mem 0xf5800000-0xf61fffff]
[ 1.281504] pci_bus 0000:04: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
[ 1.281541] NET: Registered protocol family 2
[ 1.281696] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.281865] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.282015] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.282036] TCP: reno registered
[ 1.282039] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.282068] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.282163] NET: Registered protocol family 1
[ 1.282176] pci 0000:00:02.0: Boot video device
[ 1.529060] PCI: CLS 64 bytes, default 64
[ 1.529098] Unpacking initramfs...
[ 1.590479] Freeing initrd memory: 2972K (ffff88001fd18000 - ffff88001ffff000)
[ 1.591336] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.591340] software IO TLB [mem 0xb6c12000-0xbac12000] (64MB) mapped at [ffff8800b6c12000-ffff8800bac11fff]
[ 1.591697] Scanning for low memory corruption every 60 seconds
[ 1.592068] audit: initializing netlink socket (disabled)
[ 1.592079] type=2000 audit(1378775680.569:1): initialized
[ 1.605419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.606685] zbud: loaded
[ 1.606816] VFS: Disk quotas dquot_6.5.2
[ 1.606867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.607049] msgmni has been set to 15769
[ 1.607262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.607320] io scheduler noop registered (default)
[ 1.607324] io scheduler deadline registered
[ 1.607360] io scheduler cfq registered
[ 1.607365] io scheduler bfq registered
[ 1.607452] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.607633] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.607648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.607731] intel_idle: MWAIT substates: 0x21120
[ 1.607733] intel_idle: v0.4 model 0x2A
[ 1.607734] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.607793] GHES: HEST is not enabled!
[ 1.607848] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.608292] Linux agpgart interface v0.103
[ 1.608376] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[ 1.611674] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.611689] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.611796] mousedev: PS/2 mouse device common for all mice
[ 1.611968] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.611998] rtc_cmos 00:06: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.612007] Intel P-state driver initializing.
[ 1.612017] Intel pstate controlling: cpu 0
[ 1.612032] Intel pstate controlling: cpu 1
[ 1.612043] Intel pstate controlling: cpu 2
[ 1.612054] Intel pstate controlling: cpu 3
[ 1.612065] Intel pstate controlling: cpu 4
[ 1.612076] Intel pstate controlling: cpu 5
[ 1.612089] Intel pstate controlling: cpu 6
[ 1.612100] Intel pstate controlling: cpu 7
[ 1.612312] cpuidle: using governor ladder
[ 1.612573] cpuidle: using governor menu
[ 1.612636] drop_monitor: Initializing network drop monitor service
[ 1.612712] TCP: cubic registered
[ 1.612809] NET: Registered protocol family 10
[ 1.612992] NET: Registered protocol family 17
[ 1.613001] Key type dns_resolver registered
[ 1.613275] PM: Hibernation image not present or could not be loaded.
[ 1.613285] registered taskstats version 1
[ 1.613900] Magic number: 13:40:205
[ 1.613944] acpi device:2d: hash matches
[ 1.613991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.614015] rtc_cmos 00:06: setting system clock to 2013-09-10 01:14:41 UTC (1378775681)
[ 1.614893] Freeing unused kernel memory: 1104K (ffffffff818b7000 - ffffffff819cb000)
[ 1.614895] Write protecting the kernel read-only data: 8192k
[ 1.619318] Freeing unused kernel memory: 1220K (ffff8800014cf000 - ffff880001600000)
[ 1.620313] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
[ 1.620314] BFS CPU scheduler v0.441 by Con Kolivas.
[ 1.627488] systemd-udevd[77]: starting version 204
[ 1.629471] SCSI subsystem initialized
[ 1.630602] ACPI: bus type ATA registered
[ 1.630697] libata version 3.00 loaded.
[ 1.631357] ahci 0000:00:1f.2: version 3.0
[ 1.631500] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.642171] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0WARNINGx5 impl SATA mode
[ 1.642175] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.642181] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.649744] scsi0 : ahciWARNING
[ 1.650013] scsi1 : ahci
[ 1.650141] scsi2 : ahci
[ 1.650269] scsi3 : ahci
[ 1.650401] scsi4 : ahci
[ 1.650493] scsi5 : ahci
[ 1.650686] ata1: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606100 irq 41
[ 1.650690] ata2: DUMMY
[ 1.650694] ata3: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606200 irq 41
[ 1.650696] ata4: DUMMY
[ 1.650698] ata5: DUMMY
[ 1.650700] ata6: DUMMY
[ 1.968795] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.968841] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.969674] ata1.00: ATA-9: M4-CT256M4SSD2, 010G, max UDMA/100
[ 1.969683] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.970728] ata1.00: configured for UDMA/100
[ 1.970980] scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 010G PQ: 0 ANSI: 5
[ 1.971592] ata3.00: ATAPI: TSSTcorp DVDWBD TS-LB23A, SC01, max UDMA/100
[ 1.972317] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.972530] sd 0:0:0:0: [sda] Write Protect is off
[ 1.972535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.972581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.972980] ata3.00: configured for UDMA/100
[ 1.974516] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.975127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.976456] scsi 2:0:0:0: CD-ROM TSSTcorp DVDWBD TS-LB23A SC01 PQ: 0 ANSI: 5
[ 1.979211] ACPI: bus type USB registered
[ 1.979276] usbcore: registered new interface driver usbfs
[ 1.979339] usbcore: registered new interface driver hub
[ 1.979451] usbcore: registered new device driver usb
[ 1.980016] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.980024] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 1.980224] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
[ 1.980231] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1.980237] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.980244] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 1.980251] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 1.980257] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 1.980264] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 1.980271] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[ 1.980520] xHCI xhci_add_endpoint called for root hub
[ 1.980523] xHCI xhci_check_bandwidth called for root hub
[ 1.980554] hub 1-0:1.0: USB hub found
[ 1.980561] hub 1-0:1.0: 2 ports detected
[ 1.980645] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.980666] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.983135] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.983140] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.983305] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.983767] xHCI xhci_add_endpoint called for root hub
[ 1.983769] xHCI xhci_check_bandwidth called for root hub
[ 1.983799] hub 2-0:1.0: USB hub found
[ 1.983808] hub 2-0:1.0: 2 ports detected
[ 2.042830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.075045] ehci-pci: EHCI PCI platform driver
[ 2.075169] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.075177] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.075185] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.075200] ehci-pci 0000:00:1a.0: debug port 2
[ 2.079109] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.079130] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7608000
[ 2.088648] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.089496] hub 3-0:1.0: USB hub found
[ 2.089505] hub 3-0:1.0: 2 ports detected
[ 2.089935] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.089946] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.089954] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.089976] ehci-pci 0000:00:1d.0: debug port 2
[ 2.093871] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.093888] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7607000
[ 2.101986] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.102116] hub 4-0:1.0: USB hub found
[ 2.102121] hub 4-0:1.0: 2 ports detected
[ 2.134853] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.199793] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.201658] systemd[1]: Set hostname to <watson>.
[ 2.268492] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 2.268851] systemd[1]: Starting Collect Read-Ahead Data...
[ 2.269341] systemd[1]: Starting Replay Read-Ahead Data...
[ 2.269709] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.269820] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.269852] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[ 2.269873] systemd[1]: Starting Syslog Socket.
[ 2.269927] systemd[1]: Listening on Syslog Socket.
[ 2.269946] systemd[1]: Starting Remote File Systems.
[ 2.269961] systemd[1]: Reached target Remote File Systems.
[ 2.269975] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.270017] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.270038] systemd[1]: Starting LVM2 metadata daemon socket.
[ 2.270074] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.270088] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 2.270126] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.270140] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.270168] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.270210] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.270352] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.270370] systemd[1]: Starting Encrypted Volumes.
[ 2.270384] systemd[1]: Reached target Encrypted Volumes.
[ 2.270402] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.270449] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.270464] systemd[1]: Starting Paths.
[ 2.270478] systemd[1]: Reached target Paths.
[ 2.270494] systemd[1]: Starting Journal Socket.
[ 2.270543] systemd[1]: Listening on Journal Socket.
[ 2.270567] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.270849] systemd[1]: Mounting Debug File System...
[ 2.271238] systemd[1]: Starting Create static device nodes in /dev...
[ 2.271494] systemd-readahead[136]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 2.271888] systemd[1]: Starting Journal Service...
[ 2.272443] systemd[1]: Started Journal Service.
[ 2.272532] systemd[1]: Mounting Huge Pages File System...
[ 2.273048] systemd[1]: Starting udev Kernel Socket.
[ 2.273080] systemd[1]: Listening on udev Kernel Socket.
[ 2.273155] systemd[1]: Starting udev Control Socket.
[ 2.273189] systemd[1]: Listening on udev Control Socket.
[ 2.273294] systemd[1]: Starting udev Coldplug all Devices...
[ 2.273733] systemd[1]: Starting Swap.
[ 2.273754] systemd[1]: Reached target Swap.
[ 2.273772] systemd[1]: Expecting device dev-disk-by\x2duuid-06ee03bc\x2dca64\x2d406d\x2dbe45\x2db2b645137e08.device...
[ 2.273786] systemd[1]: Expecting device dev-disk-by\x2duuid-5aedfe61\x2d50f2\x2d47c7\x2d82ac\x2d79930ee37462.device...
[ 2.294504] systemd-sysctl[154]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 2.298123] EXT4-fs (sda5): re-mounted. Opts: discard
[ 2.306988] systemd-udevd[161]: starting version 204
[ 2.330645] FS-Cache: Loaded
[ 2.344801] ACPI: Requesting acpi_cpufreq
[ 2.345279] wmi: Mapper loaded
[ 2.345847] RPC: Registered named UNIX socket transport module.
[ 2.345849] RPC: Registered udp transport module.
[ 2.345850] RPC: Registered tcp transport module.
[ 2.345851] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.355607] FS-Cache: Netfs 'nfs' registered for caching
[ 2.358082] ACPI: Battery Slot [BAT1] (battery present)
[ 2.358579] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.358604] ACPI: Lid Switch [LID0]
[ 2.359113] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.359119] ACPI: Power Button [PWRB]
[ 2.359456] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.359461] ACPI: Sleep Button [SLPB]
[ 2.359772] ACPI: AC Adapter [ADP1] (off-line)
[ 2.360090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.360096] ACPI: Power Button [PWRF]
[ 2.374300] ACPI: Fan [FAN0] (off)
[ 2.374551] ACPI: Fan [FAN1] (off)
[ 2.375124] ACPI: Invalid active2 threshold
[ 2.377341] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 2.377349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.377354] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 2.377358] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[ 2.377362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.377364] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 2.377368] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[ 2.377372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.377373] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 2.377377] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[ 2.377381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.377383] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.378357] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.378361] ACPI: Thermal Zone [TZ00] (52 C)
[ 2.383745] ACPI Warning: 0x000000000000e040-0x000000000000e05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[ 2.383753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.383911] mei_me 0000:00:16.0: setting latency timer to 64
[ 2.383955] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
[ 2.386775] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.388164] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.388178] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.388494] r8169 0000:03:00.0: irq 51 for MSI/MSI-X
[ 2.392549] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90004622000, e8:11:32:25:4e:78, XID 0c200000 IRQ 51
[ 2.392554] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.394650] cfg80211: Calling CRDA to update world regulatory domain
[ 2.395234] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.396342] [drm] Initialized drm 1.1.0 20060810
[ 2.397019] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.397023] ACPI: Thermal Zone [TZ01] (52 C)
[ 2.403428] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.403432] Copyright(c) 2003-2013 Intel Corporation
[ 2.403550] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.403625] iwlwifi 0000:02:00.0: irq 52 for MSI/MSI-X
[ 2.413574] iwlwifi 0000:02:00.0: loaded firmware version 41.28.5.1 build 33926 op_mode iwldvm
[ 2.414850] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[ 2.459516] samsung_laptop: detected SABI interface: SwSmi@
[ 2.459520] samsung_laptop: Backlight controlled by ACPI video driver
[ 2.475073] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.475258] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.475342] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.479302] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.479307] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.479310] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.479312] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[ 2.479315] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN, REV=0x84
[ 2.479382] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 2.486443] [drm] Memory usable by graphics device = 2048M
[ 2.486454] i915 0000:00:02.0: setting latency timer to 64
[ 2.510361] iTCO_vendor_support: vendor-support=0
[ 2.510974] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.511063] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.511169] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.515715] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.522955] hub 3-1:1.0: USB hub found
[ 2.523029] hub 3-1:1.0: 6 ports detected
[ 2.552940] i915 0000:00:02.0: irq 54 for MSI/MSI-X
[ 2.552952] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.552953] [drm] Driver supports precise vblank timestamp query.
[ 2.552974] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 2.553071] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 2.554259] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.582133] [drm] Wrong MCH_SSKPD value: 0x17050407
[ 2.582136] [drm] This can cause pipe underruns and display issues.
[ 2.582137] [drm] Please upgrade your BIOS to fix this.
[ 2.591839] tsc: Refined TSC clocksource calibration: 1995.467 MHz
[ 2.597052] fbcon: inteldrmfb (fb0) is primary device
[ 2.631810] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.691536] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 2.697765] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[ 2.708392] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard
[ 2.726771] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.732165] systemd-logind[678]: Watching system buttons on /dev/input/event4 (Power Button)
[ 2.732251] systemd-logind[678]: Watching system buttons on /dev/input/event2 (Power Button)
[ 2.732373] systemd-logind[678]: Watching system buttons on /dev/input/event1 (Lid Switch)
[ 2.732460] systemd-logind[678]: Watching system buttons on /dev/input/event3 (Sleep Button)
[ 2.733090] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.755620] hub 4-1:1.0: USB hub found
[ 2.755733] hub 4-1:1.0: 6 ports detected
[ 2.821911] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[ 3.108586] usb 4-1.3: new high-speed USB device number 3 using ehci-pci
[ 3.308514] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 3.322812] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
[ 3.395720] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 3.568352] Console: switching to colour frame buffer device 170x48
[ 3.574903] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.574905] i915 0000:00:02.0: registered panic notifier
[ 3.575357] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 3.593033] Switched to clocksource tsc
[ 3.594635] media: Linux media interface: v0.10
[ 3.601441] Linux video capture interface: v2.00
[ 3.607344] uvcvideo: Found UVC 1.00 device WebCam SCB-1110M (1210:0909)
[ 3.612805] input: WebCam SCB-1110M as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input10
[ 3.612886] usbcore: registered new interface driver uvcvideo
[ 3.612889] USB Video Class driver (1.1.1)
[ 3.624759] acpi device:47: registered as cooling_device10
[ 3.628631] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 3.628749] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input11
[ 3.631116] acpi device:51: registered as cooling_device11
[ 3.631300] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.631373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 3.631455] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.645951] i2400m_usb 4-1.3:1.0: WiMAX interface wmx0 (64:d4:da:24:b5:c0) ready
[ 3.653985] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3.654187] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 3.874277] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3.874474] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 3.963960] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.328298] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 7.107250] i2400m_usb 4-1.3:1.0: firmware interface version 9.3.2
[ 7.117012] usbcore: registered new interface driver i2400m_usb
[ 7.141746] wlan0: authenticate with 00:22:6b:70:c5:e9
[ 7.151167] wlan0: send auth to 00:22:6b:70:c5:e9 (try 1/3)
[ 7.197933] wlan0: authenticated
[ 7.200356] wlan0: associate with 00:22:6b:70:c5:e9 (try 1/3)
[ 7.201891] wlan0: RX AssocResp from 00:22:6b:70:c5:e9 (capab=0x11 status=0 aid=2)
[ 7.205520] wlan0: associated
[ 7.205524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.681425] bbswitch: version 0.7
[ 16.681440] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 16.681445] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 16.681454] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 16.681520] bbswitch: detected an Optimus _DSM function
[ 16.681556] bbswitch: disabling discrete graphics
[ 16.681559] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 16.711802] pci 0000:01:00.0: power state changed by ACPI to D3cold
[ 16.711812] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[ 41.636100] fuse init (API version 7.22)
[ 440.485588] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 440.507912] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 453.967678] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 453.984936] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
I have never seen this error and my googlefu return issues with overclocking which I am not doing. Any info on the subject I'd love to hear.
Cheers.
EDIT: Was only happening when issuing 'systemctl reboot' so I switched back to 3.10.10-1-ARCH and reboot command now works.
Last edited by doug piston (2013-09-10 02:05:56)Well, I can tell you that this kind of error is not OS related, but rather a HW thing. It happens where there is a general detection of something going wrong. Sometimes it can happen randomly and might not be an indication of a problem. But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors.
Unfortunately I don't really know what to do about such things except give you machine a proper inspection. But if things are working fine, and continue to do so, I wouldn't worry about it. If it becomes a regular occurance, then I'd worry. -
PCI slot in Thinkpad Dock II unusable
Hello, I have a Thinkpad a22m 2628-S1U which can be used with the Thinkpad Dock II. To avoid feeling tempted to buy a new laptop I bought that dock as well as an ATI Radeon x1550 to put in its PCI slot. These items were said to be compatible on http://thinkwiki.org the Linux thinkpad wiki.
Now that I've tried it out, I'm starting to think the contributors to that site were windows users who didn't read the topic. Starting up docked gave the following lspci output (notice there's no radeon card):
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
00:04.0 PCI bridge: Texas Instruments PCI2032 PCI Docking Bridge
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
08:01.0 IDE interface: Silicon Image, Inc. PCI0648 (rev 01)
08:02.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
08:02.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
0f:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
For comparison, here's what my lspci looks like undocked:
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
02:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
So a few parts of the dock are getting detected but not the most important parts. The error that I think is related to the absence of the graphics card appears in dmesg. Look for the part about "cannot allocate resource region":
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0140e000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 697.417 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 973.82 BogoMIPS (lpj=1622127)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e80)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (973.82 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
PCI: region 0000:08:02.0/9 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.1/9 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.0/10 too large: 0x0000000000000000-0x0000000003ffffff
PCI: region 0000:08:02.1/10 too large: 0x0000000000000000-0x0000000003ffffff
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xf0200000-0xf02fffff
PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
PCI: Bus 15, cardbus bridge: 0000:00:02.0
IO window: 0x00001400-0x000014ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x34000000-0x37ffffff
PCI: Bus 19, cardbus bridge: 0000:00:02.1
IO window: 0x00003400-0x000034ff
IO window: 0x00003800-0x000038ff
PREFETCH window: 0x38000000-0x3bffffff
MEM window: 0x3c000000-0x3fffffff
PCI: Bus 9, cardbus bridge: 0000:08:02.0
IO window: 0x00004000-0x000040ff
IO window: 0x00004400-0x000044ff
PCI: Bus 13, cardbus bridge: 0000:08:02.1
IO window: 0x00004800-0x000048ff
IO window: 0x00004c00-0x00004cff
PCI: Bridge: 0000:00:04.0
IO window: 4000-4fff
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 662k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
Switched to high resolution mode on CPU 0
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt for device 0000:08:01.0 disabled
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.20
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
e100: eth0: e100_probe: addr 0xf0120000, irq 10, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to: cpufreq changes.
/proc/exmap: insert
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
Clocksource tsc unstable (delta = 142862014 ns)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (49 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x0038, PCI irq 9
Socket status: 30000006
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
PCI: Bus 9, cardbus bridge: 0000:08:02.0
IO window: 0x00004000-0x000040ff
IO window: 0x00004400-0x000044ff
PREFETCH window: 0x40400000-0x407fffff
MEM window: 0x40800000-0x40bfffff
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
[<c015a764>] __report_bad_irq+0x24/0x90
[<c015aa52>] note_interrupt+0x282/0x2c0
[<c0159e70>] handle_IRQ_event+0x30/0x60
[<c015b2c3>] handle_level_irq+0xd3/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c0159e57>] handle_IRQ_event+0x17/0x60
[<c015b26d>] handle_level_irq+0x7d/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c015007b>] show_initstate+0xb/0x50
[<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
[<e0bd4bbb>] ti12xx_override+0x23b/0x6a0 [yenta_socket]
[<c0210ce3>] pci_setup_cardbus+0x103/0x190
[<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
[<c01cfa11>] sysfs_find_dirent+0x21/0x30
[<c01d09c5>] sysfs_create_link+0x85/0x120
[<c020b700>] pci_match_device+0xa0/0xc0
[<c020b816>] pci_device_probe+0x56/0x80
[<c026a9a6>] driver_probe_device+0x86/0x1a0
[<c026ab31>] __driver_attach+0x71/0x80
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a2d4>] bus_for_each_dev+0x44/0x70
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a836>] driver_attach+0x16/0x20
[<c026aac0>] __driver_attach+0x0/0x80
[<c0269c67>] bus_add_driver+0x1a7/0x220
[<c020b760>] pci_device_remove+0x0/0x40
[<c026accc>] driver_register+0x5c/0x130
[<c020ba4d>] __pci_register_driver+0x3d/0x80
[<c0150738>] sys_init_module+0x148/0x1ca0
[<c01a4bfa>] seq_open+0x3a/0x90
[<c01c2aa6>] pde_users_dec+0x16/0x50
[<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
[<c0268610>] device_remove_file+0x0/0x20
[<c0103f73>] sysenter_past_esp+0x78/0xb1
=======================
handlers:
[<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
[<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
Disabling IRQ #11
pccard: CardBus card inserted into slot 0
ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt 0000:0f:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE]
MadWifi: ath_attach: Switching rfkill capability off.
NET: Registered protocol family 23
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
IrDA: Registered device irda0
nsc-ircc, Found dongle: Reserved
ppdev: user-space parallel port driver
Yenta: ISA IRQ mask 0x0018, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
PCI: Bus 13, cardbus bridge: 0000:08:02.1
IO window: 0x00004800-0x000048ff
IO window: 0x00004c00-0x00004cff
PREFETCH window: 0x40c00000-0x40ffffff
MEM window: 0x41000000-0x413fffff
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
irq 11: nobody cared (try booting with the "irqpoll" option)
Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
[<c015a764>] __report_bad_irq+0x24/0x90
[<c015aa52>] note_interrupt+0x282/0x2c0
[<c0159e70>] handle_IRQ_event+0x30/0x60
[<c015b2c3>] handle_level_irq+0xd3/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c014007b>] set_process_cpu_timer+0x2b/0xd0
[<c0159e57>] handle_IRQ_event+0x17/0x60
[<c015b26d>] handle_level_irq+0x7d/0x100
[<c010712b>] do_IRQ+0x3b/0x70
[<c01049c7>] common_interrupt+0x23/0x28
[<c015007b>] show_initstate+0xb/0x50
[<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
[<e0bd4aff>] ti12xx_override+0x17f/0x6a0 [yenta_socket]
[<c0210ce3>] pci_setup_cardbus+0x103/0x190
[<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
[<c01cfa11>] sysfs_find_dirent+0x21/0x30
[<c01d09c5>] sysfs_create_link+0x85/0x120
[<c020b700>] pci_match_device+0xa0/0xc0
[<c020b816>] pci_device_probe+0x56/0x80
[<c026a9a6>] driver_probe_device+0x86/0x1a0
[<c026ab31>] __driver_attach+0x71/0x80
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a2d4>] bus_for_each_dev+0x44/0x70
[<c020b760>] pci_device_remove+0x0/0x40
[<c026a836>] driver_attach+0x16/0x20
[<c026aac0>] __driver_attach+0x0/0x80
[<c0269c67>] bus_add_driver+0x1a7/0x220
[<c020b760>] pci_device_remove+0x0/0x40
[<c026accc>] driver_register+0x5c/0x130
[<c020ba4d>] __pci_register_driver+0x3d/0x80
[<c0150738>] sys_init_module+0x148/0x1ca0
[<c01a4bfa>] seq_open+0x3a/0x90
[<c01c2aa6>] pde_users_dec+0x16/0x50
[<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
[<c0268610>] device_remove_file+0x0/0x20
[<c0103f73>] sysenter_past_esp+0x78/0xb1
=======================
handlers:
[<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
[<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
[<e0ae4e30>] (ath_intr+0x0/0x4810 [ath_pci])
Disabling IRQ #11
Yenta: ISA IRQ mask 0x0018, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 7, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
CMD648: IDE controller (0x1095:0x0648 rev 0x01) at PCI slot 0000:08:01.0
ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
CMD648: 100% native mode on irq 9
ide0: BM-DMA at 0x3000-0x3007
ide1: BM-DMA at 0x3008-0x300f
Probing IDE interface ide0...
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Probing IDE interface ide1...
usb 1-1.4: new low speed USB device using uhci_hcd and address 3
usb 1-1.4: configuration #1 chosen from 1 choice
ide0 at 0x3020-0x3027,0x3016 on irq 9
ide1 at 0x3018-0x301f,0x3012 on irq 9
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
lp0: using parport0 (interrupt-driven).
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
JFS: nTxBlock = 4027, nTxLock = 32219
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
For comparison here is my dockless dmesg:
Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125968 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 0 CPUs, 0 hotplug CPUs
PERCPU: Allocating 39464 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0140e000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 697.425 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03d3000 - 0xc0415000 ( 264 kB)
.data : 0xc031225e - 0xc03cc380 ( 744 kB)
.text : 0xc0100000 - 0xc031225e (2120 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1396.15 BogoMIPS (lpj=2326640)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080321
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0a20)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1396.15 BogoMIPS).
net_namespace: 652 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xf0200000-0xf02fffff
PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
PCI: Bus 2, cardbus bridge: 0000:00:02.0
IO window: 0x00001400-0x000014ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x34000000-0x37ffffff
PCI: Bus 6, cardbus bridge: 0000:00:02.1
IO window: 0x00003000-0x000030ff
IO window: 0x00003400-0x000034ff
PREFETCH window: 0x38000000-0x3bffffff
MEM window: 0x3c000000-0x3fffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 662k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
input: AT Translated Set 2 keyboard as /class/input/input1
Switched to high resolution mode on CPU 0
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.20
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
e100: eth0: e100_probe: addr 0xf0120000, irq 9, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to: cpufreq changes.
/proc/exmap: insert
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142842086 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (50 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
spurious 8259A interrupt: IRQ7.
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x0498, PCI irq 5
Socket status: 30000006
pccard: CardBus card inserted into slot 0
ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 5, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
PPP generic driver version 2.4.2
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
NET: Registered protocol family 23
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Found dongle: Reserved
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
JFS: nTxBlock = 4027, nTxLock = 32219
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
I've tried multiple options in the BIOS. You can select AGP or PCI as the card for the root display device. The default is PCI so if there's a docked PCI card at POST, the BIOS will use that for the root display device... otherwise it will use the built in card. You can also select the root display device as LCD or CRT or both. The default is CRT so if there is an external monitor that's where the bootloader menu and such will appear, otherwise the laptop's own display gets used. Even if I've understood these incorrectly, all combinations yield a PCI video card that is not detected by lspci.
I've also tried loading the module dock right after thinkpad_acpi. It loads and appears in lsmod but it doesn't help the situation at all. It also doesn't add a dock file to /proc/acpi/ibm. I also tried passing pci=routirq to the kernel, whatever that does and I've tried changing the four PCI related IRQ numbers in the BIOS and this has not helped.I did upgrade the kernel yesterday and it caused the syntax of dmesg to change somewhat. Here is a docked dmesg from 2.6.27:
Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1fff0000 @ 7000-d000
RAMDISK: 00e4d000 - 00effb5b
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 00000000 - 1fff0000
bootmap 00002000 - 00006000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
#4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
#5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem 0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130959
free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 125968 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01402000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 697.407 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03f3000 - 0xc043b000 ( 288 kB)
.data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
.text : 0xc0100000 - 0xc0319f76 (2151 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324690)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e00)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1395.93 BogoMIPS).
net_namespace: 832 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
pci 0000:00:03.0: supports D1
pci 0000:00:03.0: supports D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
pci 0000:00:03.1: supports D1
pci 0000:00:03.1: supports D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:04.0: supports D1
pci 0000:00:04.0: supports D2
PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
pci 0000:00:05.0: supports D1
pci 0000:00:05.0: supports D2
PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
PCI: 0000:08:01.0 reg 10 io port: [3020, 3027]
PCI: 0000:08:01.0 reg 14 io port: [3014, 3017]
PCI: 0000:08:01.0 reg 18 io port: [3018, 301f]
PCI: 0000:08:01.0 reg 1c io port: [3010, 3013]
PCI: 0000:08:01.0 reg 20 io port: [3000, 300f]
pci 0000:08:01.0: supports D1
pci 0000:08:01.0: supports D2
PCI: 0000:08:02.0 reg 10 32bit mmio: [52000000, 52000fff]
pci 0000:08:02.0: supports D1
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
PCI: 0000:08:02.1 reg 10 32bit mmio: [53000000, 53000fff]
pci 0000:08:02.1: supports D1
pci 0000:08:02.1: supports D2
pci 0000:08:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:02.1: PME# disabled
pci 0000:00:04.0: transparent bridge
PCI: bridge 0000:00:04.0 io port: [0, fff]
PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
PCI: bridge 0000:00:04.0 32bit mmio pref: [0, fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:04.0: BAR 7: can't allocate resource
pci 0000:00:04.0: BAR 8: can't allocate resource
pci 0000:00:04.0: BAR 9: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
pci 0000:00:02.0: CardBus bridge, secondary bus 0000:0f
pci 0000:00:02.0: IO window: 0x001400-0x0014ff
pci 0000:00:02.0: IO window: 0x001c00-0x001cff
pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:02.1: CardBus bridge, secondary bus 0000:13
pci 0000:00:02.1: IO window: 0x003400-0x0034ff
pci 0000:00:02.1: IO window: 0x003800-0x0038ff
pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
pci 0000:08:02.0: CardBus bridge, secondary bus 0000:09
pci 0000:08:02.0: IO window: 0x004000-0x0040ff
pci 0000:08:02.0: IO window: 0x004400-0x0044ff
pci 0000:08:02.0: PREFETCH window: 0x48000000-0x4bffffff
pci 0000:08:02.0: MEM window: 0x40000000-0x43ffffff
pci 0000:08:02.1: CardBus bridge, secondary bus 0000:0d
pci 0000:08:02.1: IO window: 0x004800-0x0048ff
pci 0000:08:02.1: IO window: 0x004c00-0x004cff
pci 0000:08:02.1: PREFETCH window: 0x4c000000-0x4fffffff
pci 0000:08:02.1: MEM window: 0x44000000-0x47ffffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
pci 0000:00:04.0: IO window: 0x4000-0x4fff
pci 0000:00:04.0: MEM window: 0x40000000-0x47ffffff
pci 0000:00:04.0: PREFETCH window: 0x00000048000000-0x0000004fffffff
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:02.1: power state changed by ACPI to D0
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [f0200000, f02fffff]
bus: 01 index 2 mmio: [f8000000, fbffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 0f index 0 io port: [1400, 14ff]
bus: 0f index 1 io port: [1c00, 1cff]
bus: 0f index 2 mmio: [30000000, 33ffffff]
bus: 0f index 3 mmio: [34000000, 37ffffff]
bus: 13 index 0 io port: [3400, 34ff]
bus: 13 index 1 io port: [3800, 38ff]
bus: 13 index 2 mmio: [38000000, 3bffffff]
bus: 13 index 3 mmio: [3c000000, 3fffffff]
bus: 08 index 0 io port: [4000, 4fff]
bus: 08 index 1 mmio: [40000000, 47ffffff]
bus: 08 index 2 mmio: [48000000, 4fffffff]
bus: 08 index 3 io port: [0, ffff]
bus: 08 index 4 mmio: [0, ffffffff]
bus: 09 index 0 io port: [4000, 40ff]
bus: 09 index 1 io port: [4400, 44ff]
bus: 09 index 2 mmio: [48000000, 4bffffff]
bus: 09 index 3 mmio: [40000000, 43ffffff]
bus: 0d index 0 io port: [4800, 48ff]
bus: 0d index 1 io port: [4c00, 4cff]
bus: 0d index 2 mmio: [4c000000, 4fffffff]
bus: 0d index 3 mmio: [44000000, 47ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 714k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 288k freed
Switched to high resolution mode on CPU 0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
pata_acpi 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pata_acpi 0000:08:01.0: PCI INT A disabled
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.21
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
e100 0000:00:03.0: PME# disabled
e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to cpufreq changes
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142865538 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (24 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000006
Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
irq 9: nobody cared (try booting with the "irqpoll" option)
Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
[<c015ce54>] __report_bad_irq+0x24/0x90
[<c015d142>] note_interrupt+0x282/0x2c0
[<c015c450>] handle_IRQ_event+0x30/0x60
[<c015d9b3>] handle_level_irq+0xd3/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c0104927>] common_interrupt+0x23/0x28
[<c03100d8>] cache_add_dev+0x272/0x44a
[<c015c430>] handle_IRQ_event+0x10/0x60
[<c015d95d>] handle_level_irq+0x7d/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c015cbc1>] setup_irq+0x121/0x250
[<c0104927>] common_interrupt+0x23/0x28
[<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
[<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
[<e0c16c58>] ti12xx_override+0x238/0x6a0 [yenta_socket]
[<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
[<c01d4012>] sysfs_add_one+0x12/0x50
[<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
[<c0318f05>] _spin_unlock+0x5/0x20
[<c020bce0>] pci_match_device+0xa0/0xc0
[<c020c4b6>] pci_device_probe+0x56/0x80
[<c026da76>] driver_probe_device+0x86/0x1a0
[<c0318af4>] _spin_lock_irqsave+0x34/0x50
[<c026dc01>] __driver_attach+0x71/0x80
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d3a4>] bus_for_each_dev+0x44/0x70
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d906>] driver_attach+0x16/0x20
[<c026db90>] __driver_attach+0x0/0x80
[<c026cd37>] bus_add_driver+0x1a7/0x220
[<c020c400>] pci_device_remove+0x0/0x40
[<c026dd9c>] driver_register+0x5c/0x130
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c020c6f7>] __pci_register_driver+0x47/0x90
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c010111a>] do_one_initcall+0x2a/0x160
[<c0123480>] hrtick_start_fair+0x190/0x1b0
[<c0126635>] check_preempt_wakeup+0xe5/0x120
[<c0126def>] try_to_wake_up+0xaf/0x180
[<c015474b>] sys_init_module+0x8b/0x1b0
[<c0103ef3>] sysenter_do_call+0x12/0x33
=======================
handlers:
[<c0229cfc>] (acpi_irq+0x0/0x1f)
[<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
Disabling IRQ #9
pccard: CardBus card inserted into slot 0
PCI: 0000:0f:00.0 reg 10 32bit mmio: [0, ffff]
ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
ath_pci 0000:0f:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
input: Video Bus as /class/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Error: Driver 'pcspkr' is already registered, aborting...
NET: Registered protocol family 23
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
ppdev: user-space parallel port driver
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
cmd64x 0000:08:01.0: IDE controller (0x1095:0x0648 rev 0x01)
CMD64x_IDE 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
cmd64x 0000:08:01.0: 100% native mode on irq 9
ide0: BM-DMA at 0x3000-0x3007
ide1: BM-DMA at 0x3008-0x300f
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x3020-0x3027,0x3016 on irq 9
ide1 at 0x3018-0x301f,0x3012 on irq 9
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
irq 9: nobody cared (try booting with the "irqpoll" option)
Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
[<c015ce54>] __report_bad_irq+0x24/0x90
[<c015d142>] note_interrupt+0x282/0x2c0
[<c015c450>] handle_IRQ_event+0x30/0x60
[<c015d9b3>] handle_level_irq+0xd3/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c0104927>] common_interrupt+0x23/0x28
[<c031007b>] cache_add_dev+0x215/0x44a
[<c03100d8>] cache_add_dev+0x272/0x44a
[<c015c430>] handle_IRQ_event+0x10/0x60
[<c015d95d>] handle_level_irq+0x7d/0x100
[<c010710b>] do_IRQ+0x3b/0x70
[<c015cbc1>] setup_irq+0x121/0x250
[<c0104927>] common_interrupt+0x23/0x28
[<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
[<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
[<e0c16b97>] ti12xx_override+0x177/0x6a0 [yenta_socket]
[<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
[<c01d4012>] sysfs_add_one+0x12/0x50
[<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
[<c0318f05>] _spin_unlock+0x5/0x20
[<c020bce0>] pci_match_device+0xa0/0xc0
[<c020c4b6>] pci_device_probe+0x56/0x80
[<c026da76>] driver_probe_device+0x86/0x1a0
[<c0318af4>] _spin_lock_irqsave+0x34/0x50
[<c026dc01>] __driver_attach+0x71/0x80
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d3a4>] bus_for_each_dev+0x44/0x70
[<c020c400>] pci_device_remove+0x0/0x40
[<c026d906>] driver_attach+0x16/0x20
[<c026db90>] __driver_attach+0x0/0x80
[<c026cd37>] bus_add_driver+0x1a7/0x220
[<c020c400>] pci_device_remove+0x0/0x40
[<c026dd9c>] driver_register+0x5c/0x130
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c020c6f7>] __pci_register_driver+0x47/0x90
[<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
[<c010111a>] do_one_initcall+0x2a/0x160
[<c0123480>] hrtick_start_fair+0x190/0x1b0
[<c0126635>] check_preempt_wakeup+0xe5/0x120
[<c0126def>] try_to_wake_up+0xaf/0x180
[<c015474b>] sys_init_module+0x8b/0x1b0
[<c0103ef3>] sysenter_do_call+0x12/0x33
=======================
handlers:
[<c0229cfc>] (acpi_irq+0x0/0x1f)
[<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
[<e0b3fdf0>] (ath_intr+0x0/0x4880 [ath_pci])
[<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
[<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
Disabling IRQ #9
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
lp0: using parport0 (interrupt-driven).
usb 1-1.4: new low speed USB device using uhci_hcd and address 3
usb 1-1.4: configuration #1 chosen from 1 choice
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ACPI: EC: missing confirmations, switch off interrupt mode.
JFS: nTxBlock = 4026, nTxLock = 32211
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
Note the "can't allocate resource areas"... And here is the new dockless dmesg:
Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1fff0000 @ 7000-d000
RAMDISK: 00e4d000 - 00effb5b
DMI 2.3 present.
ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
ACPI: FACS 1FFFF000, 0040
ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fff0000
low ram: 00000000 - 1fff0000
bootmap 00002000 - 00006000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
#4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
#5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001fff0
HighMem 0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130959
free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 125968 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01402000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
ACPI: Added _OSI(Linux)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 697.409 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03f3000 - 0xc043b000 ( 288 kB)
.data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
.text : 0xc0100000 - 0xc0319f76 (2151 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324696)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ACPI: setting ELCR to 0200 (from 0e00)
weird, boot CPU (#0) not listedby the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (1395.93 BogoMIPS).
net_namespace: 832 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
pci 0000:00:03.0: supports D1
pci 0000:00:03.0: supports D2
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
pci 0000:00:03.1: supports D1
pci 0000:00:03.1: supports D2
pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PME# disabled
PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
pci 0000:00:05.0: supports D1
pci 0000:00:05.0: supports D2
PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: Power Resource [PSER] (off)
ACPI: Power Resource [PSIO] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x103f has been reserved
system 00:02: ioport range 0x1040-0x104f has been reserved
system 00:02: ioport range 0xfe00-0xfe0f has been reserved
system 00:09: ioport range 0x15e0-0x15ef has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02
pci 0000:00:02.0: IO window: 0x001400-0x0014ff
pci 0000:00:02.0: IO window: 0x001c00-0x001cff
pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06
pci 0000:00:02.1: IO window: 0x003000-0x0030ff
pci 0000:00:02.1: IO window: 0x003400-0x0034ff
pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
pci 0000:00:02.1: power state changed by ACPI to D0
pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [2000, 2fff]
bus: 01 index 1 mmio: [f0200000, f02fffff]
bus: 01 index 2 mmio: [f8000000, fbffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [1400, 14ff]
bus: 02 index 1 io port: [1c00, 1cff]
bus: 02 index 2 mmio: [30000000, 33ffffff]
bus: 02 index 3 mmio: [34000000, 37ffffff]
bus: 06 index 0 io port: [3000, 30ff]
bus: 06 index 1 io port: [3400, 34ff]
bus: 06 index 2 mmio: [38000000, 3bffffff]
bus: 06 index 3 mmio: [3c000000, 3fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 714k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1006
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:00.0: Boot video device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial 00:0c: activated
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 288k freed
Switched to high resolution mode on CPU 0
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:07.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
Driver 'sr' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.21
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
Registered led device: tpacpi::thinklight
thinkpad_acpi: another device driver is already handling bay events
thinkpad_acpi: disabling subdriver bay
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /class/input/input2
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
e100 0000:00:03.0: PME# disabled
e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1864kHz
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[drm] Initialized r128 2.5.0 20030725 on minor 0
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
fuse init (API version 7.9)
Marking TSC unstable due to cpufreq changes
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Clocksource tsc unstable (delta = 142862504 ns)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (34 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
spurious 8259A interrupt: IRQ7.
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000020
Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
Yenta: ISA IRQ mask 0x00b8, PCI irq 9
Socket status: 30000006
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pccard: CardBus card inserted into slot 0
PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff]
ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
ath_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /class/input/input6
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
Error: Driver 'pcspkr' is already registered, aborting...
usb 1-1: new low speed USB device using uhci_hcd and address 2
input: Video Bus as /class/input/input7
usb 1-1: configuration #1 chosen from 1 choice
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
NET: Registered protocol family 23
parport_pc 00:0d: activated
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
nsc-ircc 00:0e: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
PPP generic driver version 2.4.2
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
lp0: using parport0 (interrupt-driven).
ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
ppdev: user-space parallel port driver
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usbcore: registered new interface driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input9
input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
JFS: nTxBlock = 4026, nTxLock = 32211
Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
conservative governor failed, too long transition latency of HW, fallback to performance governor
thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
The strangest thing has also happened recently. The laptop refuses to use its own display when starting up in the dock unless an external monitor is plugged in. If a CRT is plugged in, the docked laptop starts up and shows the splash screen on its LCD. If no CRT is plugged in, turning on the docked laptop results in a blank screen. This might have happened because I fiddled with the BIOS which would make alot of sense but resetting the BIOS to default configuration hasn't fixed the problem. I also could have broken a pin but the last thing I remember doing before this happened is running cat /sys/module/snd_ac97_codec/parameters/power_save. It's one of those untouchable virtual files that causes a kernel oops when I try to read it sometimes. I have no idea how this would break the dock but it doesn't matter. Even if using the dock requires some external monitor jazz, I still want the card to be detected and it isn't.
Sorry to bombard you with obscure information but I don't know where else to turn. I've asked on the thinkpad mailing list and IRC channel to no response and I've seen one other "knowledgeable person" mention these errors on the LKML. I will subscribe to that and ask him too. I'm just very surprised... this gave me the impression that what I wanted to do would work trivially and automatically on Linux and now I'm finding that it's broken for me and possibly every other Linux user. I will seek out thinkpad users from around here with all types of models and distros and see if they have any luck. So far Arch, Arch install CD and an ancient Ubuntu install CD don't work here. If anyone has this and can test it or can decipher some ideas from the posted output (new kernel parameters, new kernel config flags, new udev rules, new modules?) I'd really appreciate it. -
HP Pavilion a6352f PCIe MB152-15W Error
This morning my scheduled HP diagnostic tool ran as usual and showed the following error code for my PCIe slot:
MB152-15W
I recently installed a JMicron JMB36X sata controller in my PCIe slot which seems to be running fine. I have this card setup to mirror 2x1TB WD Green drives. I've check my windows vista device manager and there doesn't seem to be a problem with this controller. All looks ok so far.
I’ve researched this error code and from what I’ve read so far it seems to relate to a broken PCIe slot. Most of the posts I read show that the computer was sent back to HP for a motherboard replacement when under warranty. But my warranty is up now since the computer is about 4 years old and the PCIe controller seems to be working fine from what I can see.
So my questions are:
1) Should I be concerned or is the diag tool reporting something that’s not broken?
2) Is there another diag tool that someone can recommend that I can use to verify this error?
3) Should I continue to use this motherboard or should I be looking for a replacement?
4) If I do end up replacing my motherboard will my windows vista run on the new motherboard or do I have to reinstall it from scratch?
Any help is appreciated.
Thank you,
MikeFor what it's worth, I installed exactly the same card in my HP computer (an HPE-141f) a few weeks ago, and get exactly the same error when the HP diagnostic utility runs. I do find that using the esata inputs on that card makes my system unstable - on a few occasions the screen goes blank for a few seconds, and a message then comes up saying that my video card has recovered from a serious error. When I stopped using the esata inputs, but left the card in my computer, my system seems to be working perfectly. The only change I notice recently is that the mouse sometimes hesitates slightly as I move it across the screen, maybe nothing to do with the jmicron card.
Has anyone else installed the jmicron jmb36X card and run into any glitches on HP computers?
Any comment from HP on exactly what MB152-15W means?
Is this just an error message from an overzealous diagnostic utility that in the end means nothing? -
X121e, other uses for WWAN mini PCIe slot?
Does anyone know whether the mini PCIe slot in the X121e that the optional WWAN card goes in can be used for other cards?
I'm aware of the whitelist, which had been suggested may only apply to wireless devices (e.g. WLAN and WWAN) - although I'm not sure whether that's certain (i.e. doesn't apply for non-wireless devices).
I've heard some people have tried mSATA devices in this slot with no success (which isn't suprising as whilst mini PCIe is physically compatible with mSATA it isn't electrically, and so you need mSATA support in the hardware). However I've been wondering about mini PCIe SSD cards and whether they would work. I've heard that they're not brilliant when compared to mSATA devices - however I can't afford to get a large SSD for this machine, and in general, people don't need to store all their MP3/videos on SSD, as the best benefit comes with the OS and applications being stored on the SSD, with user data being fine on an HDD. My using a mini PCIe SSD, I could potentially put the OS etc onto a cheaper/smaller SSD, with the hard drive for 'data'.
Has anyone tried this, or any other non-wireless mini PCIe devices in the X121e?
ThanksMight be of interest to you that I tried a half mini pcie micro sd card reader in my X301. It would allow 64gb if it worked. However I got an error message on boot up - can't remember exactly what it was. Other than that the only other option was the intel turbo memory which was of little benefit to me.
-
I've got a Mac Pro, dual 2.66. Up until now, I've had 3 PCI slots in use (slot 1 - graphics, slot 2 - audio card, slot 4 - Firewire card) and have never used slot 3.
Yesterday I bought a new card and put it in slot 3, but it is unrecognized by System Profiler and by the drivers.
I spent a long time trying different combinations of cards in different slots, and finally came to the conclusion that slot 3 is entirely dead. No matter which card I put in the slot, System Profiler doesn't see it. (But the same card put into slot 2 or 4 works fine.)
I'm assuming that there's a hardware defect and there's nothing I can do but take it to the repair shop. Right? I thought I'd check here first just in case anyone could think of anything.
I did zap PRAM -- no change.Is it a 1x or 4x card? and did you launch Expansion Slot Utility to check the slot settings?
It use to launch automatically in Tiger, but maybe not in Leopard.
System/LIbrary/CoreServices/
Try your FW card in #3 because it only needs 1x, and #4 is 8x by default unless it was changed. -
Is anyone using the full height PCIe slot in the x120e?
Nothing I put in there is recognized in Windows 7.
If I move the current 1/2 height wireless to the full slot, it still does not work so I know it's not the card I'm using (which works in the 1/2 height slot).
I've tried a new wireless card and an HD decoder card and nothing works in the full slot.I *think* it is designed solely for a WAN type card, so no dice for me.
I've tried a wireless card (Intel 5300) and a Broadcom HD decoder with no luck.
I've even moved the 1/2 height card that came with the device into the full height slot and it simply isn't recognized.
No BIOS errors, but the device (no matter what I put there) ever shows up in Windows.
The parts list lists it as a "WAN" slot, so I guess that's all that will work which is a horrible horrible disapointment. -
I recently upgraded my pc with a GTX 970 card. It worked fine for a few days and now my PCIE slot says that it's empty. But my old AMD card is fine. I don't understand as this happened after installing anew ssd drive and restarting my pc.
the card lights up fine and the fans spin as they should.
could it be a dead pci slot?
my specs are
intel i5 4690k
8gb corsair vengeance
gtx 970 :( kinda
2 x 240gb ssd drives
tb hard drive
windows 8.1nope, before the pc would black screen after plugging in the SSD, turned on AHCPI (i think) in bios and it all worked fine. restarted pc. nothing. i just plugged my old amd card back in and it seems all drivers are installed still. even though i removed the software, could this have something to do with it.
and yeah i reset the cmos and that didn't do anything. Starting to think it might be my board because the gtx didnt sit as comfortable as my amd r9 270x.
but it worked, i was literally gaming 2 hours ago.
i doubt its the card as I checked the pins on the pci connection bit on the card and they are all fine , they match my amd card. the card powers up fine. etc. just in bios it says empty.
updated to latest mobo firmware. I've just ordered a new MOBO and hope that sorts it, otherwise its £285 for a dud card which was purchased in a shop about 150 miles away.
any suggestions would be helpful. -
DIMM1 now read as PCI Slot?
Hey guys, Happy Holidays!
My Board/System is actually running great right now, so this is more of an observation/warning than urgent cry for help. I recently changed from Corsair TWINX 3700 (434) DDR SDRAM to Corsair XMS 3500C2 (417) DDR SDRAM. The resukt was a terrific increase in performance,stability, and especially OC (210@1:1 to 223@1:1 PAT Turbo). However I was flying so high cuz of the big OC that I got greedt and tried to boot with 220FSB and use Clock Generator to get more. It worked! Until I hit 227FSB where I had a hard crash. This probably is wehat killed my Promise RAID ), and also made DIMM1 no longer readable as full! In fact it reads in Sandra, AIDA32, SMBIOS viewers, Windows info etc. as a PCI Slot. I moved my RAM to DIMMs 2&4 and all is good (I hope). Any thoughts, comments, jokes at my expense ? It may just be the SMBIOS being the way it sometimes is but, food for thought...Actually, all of my various utilities, including the Tool House USA diagnostic suite, seem to have reestablished accurate reads of the MOBO. SANDRA 2004 however, still claims that I have DIMM4 occupied w/ 512 DIMM3 empty DIMM2 occupied w/ 512 and PCI Slot empty.
Could I have actually screwed up so badly that I shifted signals or current signatures (these are just terms I am using in an attempt to sound competent). :hypecrite: I gotta tell you man, at this point even if the bloody thing is planning on blowing u and taking me with it, I still do not want to give up on it! I shudder to think of the possibility of starting over w/ another board. And even though I am quite fond enough of my fast little "Neo", I do not think I could justify replacing it with a second. There just seem to be MOBOS which are better buys considering we are now in possession of all the facts we did not have access to 6 months ago. By the way, my system is absolutely flyin, and far from displaying any signs of instability, it has actually stopped the little problems it had untill the Promise RAID went kaput!. My UPS no longer gives config errors in the Event Viewer. My games, 321 X-Copy, IE6, and backup programs are just ripping along like never before. One other note (I thought I had stated this earlier, sorry) I had Norton Ghost 2003 installed for use w/ an IDE Drive which I would fill with important data, backups etc.. In other words, even though the Symantec people told me it was safe, I was just too suspicious of the imaging process with a striped array. I did use it once a while back (on the Intel ICH5R RAID, never Promise) before I had gained anything even remotely related to a clue but everything worked fine, and I have since even established the DVD-RW image integrity.
Sorry dude, I cannot seem to make my posts concise. I hope you understand that I am not yet totally comfortable with either the subject matter, nor the medium Which is why this post is somewhat redundant in light of your last post. Thanks for your time, and the positive news.
John -
NEO-FIS2R PCI Slot IRQ Information
I've got a NEO-F1S2R on the way and am trying to figure out where I should place my M-Audio Audiophile 2496 and Hauppauge PVR250 for optimum performance. In the past I found that I had to place my soundcard on PCI slot with its own IRQ, same with the PVR250, to get the best results (if not I found I got pops and crackles during audio playback).
Can anyone tell me how IRQs are assigned to each of the PCI slots? Which slot is shared with the AGP slot. Which slot(s) are shared with the RAID controller? I've searched high and low but can't find this information.
Any help is greatly appreciated.
Thanks,
-Mikeyou definatly want your own irq for the m-audio/midiman card, in my case i have my hammerfall card running in slot 3 (2 away from agp) and my uad card in slot 4 and both have there own irq without having to assign in bios, this might not be your issue though as maudio cards are very shoot and miss, althought it might cost 2-3 times as much as your soundblaster card, it is on the entry level tier of pro audio cards, having this said and done, they do sound great if they get working properly,
if you continue having problems after you solve your irq issues hit me a pm, as i am very experienced with recording systems of most platform, first thing i can tell you is if your using cubase sx or nuendo, make sure you select asio drivers for your midiman card, apologies if youve already been this far, but that is the most overlooked part of a vst system, (if asio is a selection in your app be it sonar or acid ect pick asio over andy dx or mme drivers as they are the most low latency and high performing for windows pro audio solutions) other than that check your buffer setting from your apps, 1024 buffers is most recomended and will give you about 23 milliseconds of latency, smaller buffers will will reduce your latency but will require more juice from your system ect, again aplogies if you already know this, -
W520 second half mini-pcie slot
Under keyboard only one full and one half mini-pcie slots, specs on w520 page said 1 full, 2 half
Where is second one half slot located?
Solved!
Go to Solution.You may check under Palmrest place.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Do I need a PCI slot that is a bus master to use DMA transfers?
I want to install 3 PCI-6534, 1 PCI-6602, 1 PCI-6115 S board in a Industrial PC with a single board computer. Do all the PCI slots need to support "bus mastering" to us the DMA of all the boards?
Hi Chris,
Yes all the PCI slots must support bus mastering. That is the only way for our cards to take control and transfer data via DMA. Most PCs (including industrial PCs with PCI-to-PCI bridges) support bus mastering on all slots. If bus mastering happens to be disabled, here are some steps to change that in the bios:
1. Reboot your computer. Watch for the message during reboot that instructs you on how to enter the BIOS/Setup. Some systems have these messages disabled, so you may need to check your computer's user manual for the keys to hit. Most computers use a function key (e.g., F1, F2, or F10), but it depends on the system.
2. Once you enter the BIOS/Setup, look for an menu or option that will allow you to view settings for the PCI Bus. Typi
cal menus will have names like "Advanced" or "Computer Setup". Some systems do not give you access to the settings for the PCI Bus, so if you do not see anything, check with your computer manufacturer for assistance.
3. Look for an option to "Enable Bus Mastering" and select it.
4. Save your setting and exit.
I've also included some links to other helpful knowledge bases and a tutorial I found on the subject.
Troubleshooting PCI-GPIB, PCI-DAQ, PCI-MXI-2, PCI-IMAQ Installation Problems
http://digital.ni.com/public.nsf/websearch/F85046CC4811C066862566480065A34C?OpenDocument
Why I Am Having DMA Problems with Image Acquisition in Windows NT?
http://digital.ni.com/public.nsf/websearch/7ECD76F2F87299E8862564EB005A2F1F?OpenDocument
An Excellent Tutorial on PCI Buses and Mastering
http://www.pvinc.com/tutorial/tutorial-PCIbus.htm
Hope that helps. Have a good day.
Ron
Applications Engineer
National Instruments -
i have recently bought a kt4 abd sucessfully installed my pny graphics card and hard drives etc.however when i attempt to install any pci card in any pci slot i get a string of beeps and my system hangs.
when i remove the card the system reboots no problem.
any suggestions welcome :(hi thanks for all your previous help
i have a new problem now with win 2000/xp.everything works ok under win 98 but when i choose my other o/s i can not install my terratec ewsmmt sound card i get a code 10 error which represents a driver error.i have used old and new updated drivers with no avail.on xp my hp scsi cd 2000 will also not load as well an atapi cd rom now and then.this is very frustrating as cubase sx only runs on 2000/xp.any ideas?
i have tried various ways of installing cards in different slots and orders but it still does not work -
Does changing pci slots reassign irqs?
i've tried sticking my soundcard in every pci slot on my nforce mobo but the irq never changes. i thought it was supposed to. is this something to do with the mobo?
in the bios, there is an option to 'reserve' irqs. what's that about?
thxQuote
hi,
tried reinstall and managed to get up to 22 irqs (yay!), but pci slots don't correspond to the ones you listed. my graphics card agp is on irq 5 and sharing with something else. changing soundcard from pci 5 to 4 still doesn't change irq, it sits on 11.
what bios settings did you use? my configuration during reinstall:
high performance defaults
apic = enabled, 1.4
pnp os = no (maybe have to make this 'yes'?)
reset escd = no
escd = auto
windows xp pro
thanks
Something is definitely wrong with the install. Once APIC has been enabled no PCI device (other than system management) is supposed to use IRQ's below 15. Those IRQ's are left alone for "legacy" purposes.
BIOS 2.6 (2.4 is an option assuming you don't mind the PCI performance hit).
BIOS is flashed with: awfl820.exe w6373nms.260 /py /sn /cd /cp /cc
Reset
(ignore the above if you are already on 2.6)
Enter into BIOS
Load High Performance Defaults confirm Yes and then choose Save and Exit Setup
Enter into BIOS and configure as follows.
Standard CMOS Features:
Set Date and Time
Set Primary Master to Manual and leave Access Mode at Auto
Set Primary Slave to None/Auto
Leave Secondary Master at Auto/Auto
Leave Secondary Slave at Auto/Auto
Drive A 1.44, 3.5 in.
Drive B None
Video EGA/VGA
Halt on All Errors
Advanced BIOS Features:
Quick Boot: Enabled
Full Screen LOGO Show: Disabled
CPU Internal Cache: Enabled
External Cache: Enabled
First Boot Device: HDD-0
Second Boot Device: HDD-0
Third Boot Device: HDD-0
Boot Other Device: Disabled
HDD S.M.A.R.T: Disabled
Swap Floppy Drive: Disabled
Boot up Floppy Seek: Enabled
Boot up NumLock LED: On
Gate A20 Option: Fast
Typematic Rate Settings: Disabled
Security Option: Setup
APIC Mode: Enabled
MPS Version Control for OS: 1.4
OS Select for DRAM > 64MB = Non-OS2
Video BIOS Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
xxxxx-xxxxx Shadow: Disabled
Small Logo(EPA) Show: Disabled
Advanced Chipset Features:
System BIOS Cacheable: Disabled
Video RAM Cacheable: Disabled
DDRAM Auto Precharage(W/R): Enabled
CAS Latency Override: 2 Clocks
AGP Aperature Size (MB): 128MB
Monochrome Access: AGP
AGP Bus Driving Control: Auto
Frame Buffer Size: 32M
Integrated Peripherals:
MCP OnChip IDE Device:
OnChip IDE Channel0: Enabled
OnChip IDE Channel1: Enabled
IDE Prefetch Mode: Enabled
Primary Master PIO: Auto
Primary Slave PIO: Auto
Secondary Master PIO: Auto
Secondary Slave PIO: Auto
Primary Master UDMA: Auto
Primary Slave UDMA: Auto
Secondary Master UDMA: Auto
Secondary Slave UDMA: Auto
IDE DMA transfer access: Enabled
MCP OnChip PCI Device:
MCP AC97 Audio: Enable
MCP MC97 Modem: Disable
MCP OnChip LAN: Auto
MCP SPDIF Out: Enable
Onboard SuperIO Device:
Onboard FDC Controller: Enabled
Onboard Serial Port 1: 3F8/IRQ4
Onboard Serial Port 2: Disabled
Onboard Parallel Port: 378/IRQ7
Parallel Port Mode: ECP+EPP
EPP Mode Select: EPP1.9
ECP Mode Use DMA: 3
Game Port Address: 201
Midi Port Address: Disabled
Init Display First: Onboard/AGP
OnChip USB: Enabled
USB Keyboard Support: Disabled
BIOS Protect: Disabled
IDE HDD Block Mode: Enabled
POWER ON Function: Hot KEY
Hot Key Power ON: Ctrl-F1
Power Management Setup:
IPCA function: Enabled
Sleep State: S3(STR)
Power Management Option: User Define
Video Off Method: DPMS Support
MODEM Use IRQ: NA
Soft-Off by PBTN: Instant-Off
IRQ/Event Activity Detect:
USB Resume from S3/S4: Enabled
Wake-Up by PCI card (PME): Enabled
IRQs Activity Monitoring:
IRQs Activity: Primary
IRQ3 (COM 2): Enabled
IRQ4 (COM 1): Enabled
IRQ5 (LPT 2): Enabled
IRQ6 (Floppy Disk): Enabled
IRQ7 (LPT 1): Enabled
IRQ8 (RTC Alarm): Disabled
IRQ9 (Reserved): Enabled
IRQ10 (Reserved): Enabled
IRQ11 (Reserved): Enabled
IRQ12 (PS/2 Mouse): Enabled
IRQ13 (Coprocessor): Enabled
IRQ14 (IDE Channel 0): Enabled
IRQ15 (IDE Channel 1): Disabled
Power Status Led: Single
PnP/PCI Configurations:
PNP OS Installed: No
Reset Configuration Data: Disabled
Resources Controlled By: Auto(ESCD)
PCI/VGA Palette Snoop: Disabled
PC Health Status:
CPU Warning Temperature: Disabled
CPU Fan Detection: No
Shutdown Temperature: Disabled
Warning_Beep: Disabled
Frequency/Voltage Control:
Clock Spread Spectrum: Disabled
CPU/MEM/AGP's Freq: 133/266/66
CPU CLOCK RATIO: 11.5
CPU Voltage Adjust: Default
If your memory is not compatible with the DDR Memory Precharge of a CAS latency setting of 2, make sure to adjust those values appropriately.
Also make sure to adjust your CPU/MEM/AGP and Clock Ratio setting to the one that correspond with your system.
Begin Windows 2000 install. When text stating, "Setup is inspecting your hardware" appears hit F5. Doing so several times is okay to make sure the keystroke is recognized. Choose "ACPI Uniprocessor" from the menu that appears shortly after.
As a side note, it would appear that installing SP2 before installing the chipset drivers can cause problems. Always NVIDIA chipset drivers first and then SP2.
The end result should turn out like so:
http://www.geocities.com/ryu_connor/irq.htm
The results do vary some. My current install has chosen some different values than the one pictured above, but nothing radical. -
MOVED: H61M-p20 G3 PCI slot issue
This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=160595.0Quote from: xmad on 30-July-12, 09:41:44
Possibly, or it could still be a weak psu, short caused by debris or extra standoff, damaged cpu or socket, damaged pcie slot etc.
That's what you should completely remove the mobo count the stand offs and make sure there are no extras or other objects shorting the mobo.
Check device manager and make sure all drivers are installed.
If you can get you hands on a better psu try it, just to be sure.(although if it runs the gpu on the other mobo its probably alright to skip)
Remove and inspect the cpu and socket/ re-seat the cpu
If all that turns up nothing then yes, its probably the board.
Well, I actually decided to try my GPU on my old Mobo, right now is working. I did all of that and of course, installed the chipset drivers, perhaps hoping that it would make the mobo recognize the PCI slot, which didn't happen. Of course I really much appreciate your help, but since all the options above didn't fix the problem, it turns out that I got a defective mobo, which is sad. Just to make myself sure, Im gonna try to get another PSU, but I don't think is gonna make any difference, since my old MB is more demanding than the new one. You are free to close this thread. Then again, thank you very much for your help.
Maybe you are looking for
-
Problem With 100% Down Payment A/R Invoice
Hi All, I am facing a problem while creating a 100% A/R Down Payment Invoice. Let me describe the steps that I have followed- 1. Initially Customer C1 has : Account Balance=0, Deliveries=0, Orders=0. It's a new customer. 2.
-
RBAC configuration in Solaris 10
Hello All, I am trying to implement a script for resetting the users password without allowing user management (usrmgr group) to have direct access to password command by added this script in "usrmgr RBAC profile". Kindly let me know the syntax that
-
Exchange roaming (or lack of) with E55
Hi there - can anyone help with the following: E55 set up with a hosted Exchange account (via 123together.com) and a Yahoo Mail account. The settings of the Yahoo account allow for me to choose whether it will sync email when roaming from home netwo
-
After Effects Bridge not working
I have seen other posts advising to reinstall (did that) but the bridge does not come up when I go to Annimation Presets or File / Browse in Bridge. It worked yesterday but not today. Can anyone get me on the right track to getting this working again
-
Active SQL Window Truncates SQL
My active SQL window is truncating the statement being returned from the sql area. Its also not formatted, is there any way to control this? Thanks in advance...