PCK and Java Proxy Runtime

Hello,
I am a newbie to XI world and have some questions regarding PCK and Java Proxy Runtime. Is it possible to send the message from PCK by using Java Proxy Runtime as Sender?
If yes what exactly configuration steps have to be done on PCK side like SLD & ExchangeProfile configuration according to Configuration Guide or XI Receiver Adapter with Receiver agreement creation?
Thanks in advance,
Viktar

Hi Stefan,
Thanks for information. We successfully checked a simple test scenarion JPR -> PCK -> File. It was necessary to configure properly XI Sender and File Receiver adapters on PCK.
SLD and Exchange Profile were not required to be configurable but in this case we have to use MessageSpecifier interface in client proxy for sender and receiver determinations.
Regards,
Viktar

Similar Messages

Give me description about JAVA Proxy Runtime and JAVA Proxy Server

Give me description about JAVA Proxy Runtime and JAVA Proxy Server with some examples.

Hi,
Java proxy runtime :
Using the Java proxy runtime you can receive messages or send messages to the Integration Server.
This will help you
http://help.sap.com/saphelp_nw04/helpdata/en/64/7e5e3c754e476ee10000000a11405a/frameset.htm
Java proxy server :
The connection to the Integration Server by using the Java proxy runtime.
This will help you
http://help.sap.com/saphelp_nw04/helpdata/en/87/5305adc23540b8ac7bce08dbe96bd5/frameset.htm
Regards
Agasthuri Doss

Java Proxy Runtime: failure to locate proxy bean on inbound call

Hello gurus of the SDN,
I have been trying to get an inbound Java Proxy scenario to work in XI 3.0 but have not been able to get the JPR to recognize my generated and deployed java code. My scenario is set up to call the java proxies generated from a message interface based on the MATMAS Idoc. I successfully deployed the generated java proxies on the same host box as is running the XI instance. The objects are named as follows
Message interface on XI = Inbound_MATMAS04
Generated proxy bean = Inbound_MATMAS04_PortTypeBean
Implementing class = InboundMATMAS04_PortTypeImpl
Implementing method = inboundMATMAS04
I used the JPR transport servlet to register the interface and implementing class but am not sure if I did this correctly. I used the following entry in my web browser:
http://nadcp786:50000/ProxyServer/register?
ns=urn:xiTrainingLabs:groupXX:SAP&
interface=InboundMATMAS04&
bean=InboundMATMAS04_PortTypeImpl&
method=inboundMATMAS04
I also tried using the localejb/ prefix for the bean name in the above step since the code is co-located. When I trigger the scenario, the Idoc info is passed into XI and the Java Proxy Runtime is called, but I get the following error response back in the SOAP header:
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="PARSING">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Cannot locate proxy bean InboundMATMAS04_PortTypeImpl: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Cannot locate proxy bean InboundMATMAS04_PortTypeImpl</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Finally, appended at the end of this post is the audit log of the messaging system showing that the JPR is called but without being able to locate the bean. I think I am missing a configuration step somewhere, but cant figure out what it is!! Can anyone help me?
Many thanks in advance.
Regards,
Nick Simon
Time Stamp     Status     Description
2004-10-25 19:47:32     Success     The message was successfully received by the messaging system. Profile: XI URL: http://nadcp786.bcsdc.lexington.ibm.com:50000/MessagingSystem/receive/JPR/XI
2004-10-25 19:47:32     Success     Using connection JPR. Trying to put the message into the receive queue.
2004-10-25 19:47:32     Success     The message was successfully retrieved from the receive queue.
2004-10-25 19:47:32     Success     The message status set to DLNG.
2004-10-25 19:47:32     Success     Java proxy runtime (JPR) accepted the message
2004-10-25 19:47:34     Error     JPR could not process the message. Reason: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl
2004-10-25 19:47:34     Error     Delivery of the message to the application using connection JPR failed, due to: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl.
2004-10-25 19:47:34     Error     The message status set to FAIL.
2004-10-25 19:47:34     Error     Asynchronous error detected: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl. Trying to report it.
2004-10-25 19:47:34     Error     Asynchronous error reported.
Message was edited by: Nicholas Simon

Hi
How do you determine the JNDI naming of the a EJB?
I have following entry in JNDI directory in the root
Object Name FlightQueryIn
Class Name javax.naming.Reference
Context Name
Object Value Reference Class Name:
Type: clientAppName
Content: sap.com/JavaProxyEAR
Type: interfaceType
Content: remote
Type: home
Content: com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundHome4
Type: ejb-link
Content: FlightSeatAvailabilityQueryIn_PortTypeBean
Type: jndi-name
Content: FlightQueryIn
Type: remote
Content: com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundRemote4
I tried to register the bean with JPR using:
http://ctsapxid01:50100/ProxyServer/register?ns=http://sap.com/xi/XI/Demo/Airline&interface=FlightSeatAvailabilityQuery_In&bean=FlightQueryIn&method=flightSeatAvailabilityQueryIn
I followed the following blog
http://wiki.sdn.sap.com/wiki/display/Java/JavaProxyChangesinPI7.1fromPI7.0
Thanks,
Chris

About Java mapping and java proxy

Hi
Iam new to Xi and basically iam an ABAPER.When iam dooing mappinps or proxies i cant able to understand the java pari cant (javamapping and java proxies) .I need some notes on java mapping and java proxy which is easy to do.And why do we use this java mapping or java proxy particularly when we r having abap mappipng and abap proxy.
thanks in advance

Hi,
refer
Java Mapping
SAP Network Blog: Java Mapping (Part I)
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
Java Mapping in XI
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=java+mapping&adv=false&sortby=cm_rnd_rankvalue#
Runtime Environment (Java Mappings) (SAP Library - Partner Connectivity Kit)
http://help.sap.com/saphelp_nw04/helpdata/en/bd/c91241c738f423e10000000a155106/frameset.htm
Java Mapping (SAP Library - Partner Connectivity Kit)
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
SAP Network Blog: Testing and Debugging Java Mapping
/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
SAP Network Blog: Implementing a Java Mapping in SAP PI
/people/carlosivan.prietorubio/blog/2007/12/21/implementing-a-java-mapping-in-sap-pi
"JAVA MAPPING", an alternate way of reading a CSV file
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
SAP Network Blog: XI Java Mapping Helper (DOM)
/people/alessandro.guarneri/blog/2007/03/25/xi-java-mapping-helper-dom
Java Proxy
Java Proxy Objects (SAP Library - SAP Exchange Infrastructure)
http://help.sap.com/saphelp_nw04/helpdata/en/c5/7d5e3c754e476ee10000000a11405a/frameset.htm
Accessing Active Directory through Java Proxy on SAP Exchange Infrastructure 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10716e9f-23d7-2a10-8c8c-d2665615f8fc
Thanks
Swarup

ABAP proxy object and JAVA proxy objects

can anyone explain whether ABAP proxy object and JAVA proxy objects can communicate with each others?
if yes then how???

JCO connectors would be able to do the trick here i guess
regards
krishna

Direct Connection ABAP Proxy and Java Proxy possible ????

Hi Folks ,
As i read as direct connection possible between 2 SAP systems only ..
and also i read as WS Direct Connection u2013 (Java) ..
What it means ?? is it ABAP Proxy to Java Proxy using Direct connection ?? Like Java Client Proxy and ABAP Server proxy
I am not clear on this.. Could you please explain or help me on this . ??
Siva..

Hi ,
+You can do both for java proxies as well Abap proxies.+
As per the following points
1. Point-to-point connection is a new capability available with SAP NW PI 7.1. It allows applications or systems to send messages using WS-RM without going through a middleware, e.g. PI, but still using a centralized tool to design and
configure the interfaces and connection properties.
2. SAP XI 3.0/PI 7.00 or higher releases can be licensed based on the total volume of messages in
gigabytes (GB) that is processed per month. The size of the payload is determined in the integration
server. The information is then aggregated according to sender and receiver system.
Question :
1. If Message exchange between 2 SAP applications using direct connection .. Then dont we need to consider about licencing cost for volume of messages per month ?
2. So if i use ABAP Client Proxy to Java Server proxy scenario.. can i use direct connection ? Eg., SAP ECC to java application ?
In both the cases PI Runtime is not required .. Am i right ?
Please clarify..
Siva..

Error with JPR(Java Proxy Runtime) in Adapter Monitor of RWB

Dear Experts,
             I am implementing scenario with Client Java Proxy(Outbound) and Server ABAP Proxy(Inbound). We have done all the designing in IR and configurations in ID. We have deployed the EAR successfully. But when we go to RWB(Runtime Work Bench) to monitor the inital status of JPR in RWB->Adapter Monitor. It shows the following error.
Status     Name                                Text
Error        SLD Access                     SLD host:port = yhsapi01.yashsap.com:50000
Error getting JPR configuration from SLD. Exception: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=yhsapi01 SYSNR=00 GWHOST=yhsapi01 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Wed Jun 03 19:42:45 200
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 10713
COUNTER 5521
No access to get JPR configuration

Hi!
Obviously there are more than 100 connections opened in your system.
ERROR max no of 100 conversations exceeded
Please check your gateway settings (in ABAP you can check the parameters using transaction SMGW).
Regards,
Volker

Abap proxy and java proxy

Hi
Could you plz tell me when should we select ABAP Proxy and when should java proxy ?? Is it like that in SAP systems we use ABAP proxy and non-sap systems we use JAVA proxy ??
Thanks
Kumar

To connect to SAP system with WAS >= 6.4, ABAP proxy is used.
<i>
Is it like that in SAP systems we use ABAP proxy and non-sap systems we use JAVA proxy ?? </i>
Not always. As i mentioned the limitation of ABAP proxy.
Also, Java Proxies cannot be used for any non-SAP application. it is generally used for communication with Java Application
Regards,
Prateek

Alerts for Java Proxy Runtime

Hi Gurus!!
I have a problem with a Asynchronous Java Proxy Server.
When a message is sent from Integration Engine to the Java Proxy, in the SXMB_MONI the status is ok, but if there is a problem on the Java Proxy, I can only see on the Messaging Tool 'http://myserver:myport/MessagingSystem'.
Is there any alert to inform of problems of excution of Java Proxies?
Thanks and regards,
Manuel Míguez.

If you can see the error in the Adapter engine monitoring, you can create rule in RWB and get an alert mail. If the error is occuring beyond XI AE, you can not trigger an alert.
VJ

Communication between SOAP and java proxy does not work

Hi Group,
i want to proceed following scenario:
SOAP->XI->JavaProxy
For that i have created of the message interface of a remote function module my java proxy.
Calling the java proxy with following scenario works successfully:
RFC->XI->JavaProxy
Further, i have created in the integration engine(configuration) my wsdl file. In the SAP
Netwaever Developer Studio, i have made a standalone proxy project, that is consuming the
web service out of the wsdl file.
Testing the web service client with following example works fine:
SOAP->XI->RFC
But when i try the scenario SOAP->XI->JavaProxy, i get following rmi exception on client side:
java.rmi.RemoteException: Service call exception; nested exception is:
java.lang.Exception: Element 'Z_GPS_PING.Response' not found in response message.
at com.demo.sap.MI_WEBSRV_GPS_PING_OUTBBindingStub.MI_WEBSRV_GPS_PING_OUTB(MI_WEBSRV_GPS_PING_OUTBBindingStub.java:86)
at com.demo.test.TT_Pinger.main(TT_Pinger.java:36)
Caused by: java.lang.Exception: Element 'Z_GPS_PING.Response' not found in response message.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.getResponseDocument(MimeHttpBinding.java:942)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1231)
at com.demo.sap.MI_WEBSRV_GPS_PING_OUTBBindingStub.MI_WEBSRV_GPS_PING_OUTB(MI_WEBSRV_GPS_PING_OUTBBindingStub.java:79)
... 1 more
In the monitoring, the execution of both directions is ok. In the response message, i can see the result of the java proxy.
Here is the result:
<ns:Z_GPS_PING.Response xmlns:ns="urn:sap-com:document:sap:rfc:functions">
<E_RETURNCODE>PINGOK </E_RETURNCODE>
</ns:Z_GPS_PING.Response>
My first thought, was, that i have a problem with the prefix, so i have changed it via xslt transformation into "rfc",
but it got the same error message.
Does anyone know, which problem we have here?
For any hint or suggestion, i would be much obliged.
Greetings,
Sigi
P.S. WAS and Sap Netweave Dev Studio is on patch level 12

Hi Group,
the SAP has solved the Problem now.
The coresponding OSS note is: 862926
(release date 18.07.05)
The reason was, that the response payload name wasn't
"maindocument". For that, the adapter didn't found the payload and returned an emty one.
Greetings,
Sigi

Doubts about HTTPS requests and Java proxy

Hello,
I need help about SSL connections and Java.
I'm developing a HTTP/S proxy with Java. To test my proxy, I use Firefox. I configure the proxy option in the browser. The proxy works good with HTTP requests, but with HTTPS requests doesn't work and I don't know why.
I explain the steps that I do for a HTTPS request:
* The browser sends a CONNECT message to the proxy.
I check that the proxy receives the CONNECT request correctly.
* The proxy establish a secure connection with the content server.
I use an SSLSocket to connect with my content server, and the SSL handshake is succesful.
* The proxy sends a 200 HTTP response to the client:
I send
HTTP/1.0 200 Connection established[CRLF]
[CRLF]
to the application client (Firefox)
* The proxy sends/receive data to/from Firefox/content server
I have a Socket between Firefox and my proxy, and a SSLSocket between my proxy and my content server. I use two threads to communicate the client and the server.
Java code:
//Thead server-->proxy-->application(Firefox)
ThreadComm tpa = new ThreadComm(bis_serverSSL, bos_app);
//Thread application(Firefox)-->proxy-->server
ThreadComm tap = new ThreadComm(bis_app, bos_serverSSL);
The "tpa" thread reads from the SSLSocket between the proxy and the server and sends data to the Socket between the proxy and Firefox.
The "tap" thread reads from the Socket between the proxy and Firefox and sends data to the SSLSocket between the proxy and the server.
This is the class ThreadComm:
public class ThreadComm extends Thread{
    private BufferedInputStream bis = null;
    private BufferedOutputStream bos = null;
    public ThreadComm(BufferedInputStream bis, BufferedOutputStream bos) {
        this.bis = bis;
        this.bos = bos;
    @Override
    public void run() {
        int b = -1;
        FileOutputStream fos = null;
          do {
               try {
                    b = bis.read();
                    System.out.print((char) b);
                    fos.write(b);
                    bos.write(b);
                    bos.flush();
               } catch (Exception ex) {
                    Logger.getLogger(ThreadAplicacionProxy.class.getName()).log(Level.SEVERE, null, ex);
                    //b=-1;
          } while (b != -1);
    }But this doesn't work and I don't know why.
I have an Apache server with the mod_ssl enabled as content server, I can send requests (with Firefox) to the port 80(HTTP request) and 443(HTTPS request) without use my proxy and it works. If I use my proxy, HTTP request works but with HTTPS request doesn't work, I look the log of Apache and I see:
[Tue Apr 27 17:32:03 2010] [info] Initial (No.1) HTTPS request received for child 62 (server localhost:443)
[Tue Apr 27 17:32:03 2010] [error] [client 127.0.0.1] Invalid method in request \x80\x7f\x01\x03\x01
[Tue Apr 27 17:32:03 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
[Tue Apr 27 17:32:03 2010] [info] [client 127.0.0.1] Connection closed to child 62 with standard shutdown (server localhost:443)
Why it say? Invalid method in request \x80\x7f\x01\x03\x01 , my proxy sends the data that the Firefox sends.
I think than I have follow the explanations of [1] but doesn't work, I have problems in implementation in Java but I don't know where.
I appreciate any suggestions.
Thanks for your time.
[1] http://www.web-cache.com/Writings/Internet-Drafts/draft-luotonen-web-proxy-tunneling-01.txt

ejp, I have checked the socket between the proxy and server and ... You are right! , I was using the port 80 instead of the 443 (incredible mistake!, I'm sorry). I was convinced that I was using the port 443... Well, is a little step, but I still have not won the war :)
If I see the log files of Apache, We can see that something goes wrong.
localhost-access.log
>
127.0.0.1 - - [04/May/2010:17:44:48 +0200] "\x 80\x 7f\x01\x03\x01" 501 219
>
localhost-error.log
>
[Tue May 04 17:44:48 2010] [info] Initial (No.1) HTTPS request received for child 63 (server localhost:443)
[Tue May 04 17:44:48 2010] [error] [client 127.0.0.1] Invalid method in request \x80\x7f\x01\x03\x01
[Tue May 04 17:44:48 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
[Tue May 04 17:44:48 2010] [info] [client 127.0.0.1] Connection closed to child 63 with standard shutdown (server localhost:443)
>
I think that this happens because Apache receives the data without decrypt, this is the reason because in the log we can see the "Invalid method in request \x80\x7f\x01\x03\x01". This supposition is true?
ejp, you say that the "Termination is quite tricky." I have changed my code following yours suggestions (using the join and the shutdownOutput) but the threads don't die.
I explain you what I do:
(in time 1)
I launch the thread (threadFirefoxToApache) that reads data from Firefox and sends to Apache.
I launch the thread (threadApacheToFirefox) that reads data from Apache and sends to Firefox.
(in time 2)
threadFirefoxToApache sends the firts data to the server.
threadApacheToFirefox is waiting that the server says something.
(in time 3)
threadFirefoxToApache is waiting that Firefox says something.
threadApacheToFirefox sends data to Firefox.
(in time 4)
threadFirefoxToApache is waiting that Firefox says something.
threadApacheToFirefox is waiting that Firefox says something.
and they are waiting... and never finish.
In time 2, these first data are encrypted. The server receives these data and It doesn't understand. In time 3, the server sends a HTTP response "501 Method Not Implemented", here there is a problem because this data must be encrypt. According to the documentation that I read, the proxy cannot "understand" this data but I can "understand" this data. What's happen?
Firefox encrypt the data and send to the proxy. This It's correct.
The proxy encrypt the data another time, because I use the SSLSocket to send the data to the server. Then the server receives the data encrypted two times, when decrypt the data gets the data encrypted one time. And this is the reason why the server doesn't understand the data that sends Firefox. It's correct? May be.
Then If I want that the server receives the data encrypted one time I need to use the socketToServer, It's correct?
I will supposed that yes. If I use the socketToServer, the proxy doesn't understand nothing, because the data received from the socketToServer are encrypted (I only see simbols), but the Apache log says that there is a problem with the version? (If I use the socketToServer the threads die)
>
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 read finished A
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 write change cipher spec A
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 write finished A
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 flush data
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1756): OpenSSL: Handshake: done
[Tue May 04 19:55:42 2010] [info] Connection: Client IP: 127.0.0.1, Protocol: TLSv1, Cipher: RC4-MD5 (128/128 bits)
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1817): OpenSSL: read 5/5 bytes from BIO#29bd910 [mem: 29ea0a8] (BIO dump follows)
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1750): -------------------------------------------------------------------------
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1789): | 0000: 80 7f 01 03 .... |
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1793): | 0005 - <SPACES/NULS>
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1795): ------------------------------------------------------------------------
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
[Tue May 04 19:55:42 2010] [info] [client 127.0.0.1] SSL library error 1 reading data
[Tue May 04 19:55:42 2010] [info] SSL Library Error: 336130315 error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
[Tue May 04 19:55:42 2010] [info] [client 127.0.0.1] Connection closed to child 63 with standard shutdown (server localhost:443)
>
What option is the correct? I need use the SSLSocketToServer or socketToServer to send/read the data to/from the server?. Use the SSLSocket has sense because the data travel in a secure socket, but use the Socket also has sense because the data are encrypted and they are protected by this encription. It's complicated...

Java Proxy Runtime Error - A remote host refused an attempted connection

I am able to register my Java server proxy with no errors. However when I message is sent through I get the following error in Xi Adapter:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error invoking method someJavaProxyCallIB of proxy bean com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundLocal4LocalObjectImpl0_0: A remote host refused an attempted connect operation.: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Error invoking method someJavaProxyCallIB of proxy bean com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundLocal4LocalObjectImpl0_0: A remote host refused an attempted connect operation.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Doea anyone know why this is happening?

I guess, that you have Java proxy libraries in the EAR file. Remove them before deploying.
Regards
Stefan

Created Outside-In webservice and Java Proxy

Hi,
I had created Outside-In webservice using XI 7.1 and implemented java bean with MDM API.
I had retreived the image from MDM and converted to binary and stored in local.
Now i wanted to attached the image in the response structure.
How to acheive that to send data via httpsoap request?? Since the we need to attach the response structure with image.
Anyone please give some idea or inputs..It will be helpfull..
Thanks
Sabari

Hi,
I had created Outside-In webservice using XI 7.1 and implemented java bean with MDM API.
I had retreived the image from MDM and converted to binary and stored in local.
Now i wanted to attached the image in the response structure.
How to acheive that to send data via httpsoap request?? Since the we need to attach the response structure with image.
Anyone please give some idea or inputs..It will be helpfull..
Thanks
Sabari

Installing java proxy runtime

hi,
can any one send me doc related to installing JPR in xi system.
or steps to install jpr.
thanks and regards
vijender

Here it is
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30572c6a-d311-2a10-99ab-f646ec3b5b12
Regards,
Prateek

Where do i find JPR (Java Proxy Runtime)in RWB?

Hi
What is this SAP Note 809420. Where can i find that?
Help me
Thanks

http://service.sap.com/notes
you need marketplace id to view the notes.
<b>Mark helpful answers!!!</b>

PCK and Java Proxy Runtime

Similar Messages

Maybe you are looking for