PCM - Conditional line items

Hi, colleagues.
We are in preparation of a small application example with PCM.
Our customer asked us to prepare a screen in which he will decide to enter
or not a "line item" into the costing process.
We already know we can do it using "line item" attributes.
Do you have any suggestion on this matter?
Regards,
Rami

Similar Messages

During MIRO Condition line item not picking against Delivey Note

Hi,
We create a PO with Entry tax condition type. Problem is....
Case 1: - When we are doing MIRO of this PO, Entry tax condition is showing in line item.
Case 2: - When we are doing MIRO against Delivery Note of related PO, Entry tax condition is not showing in line item...Why???
Note: - During testing we found 2 diff. thing for both case..
1. In Case 1 during MIRO, Variance Type showing values (B & A)...
...........B for Material Line Item.
...........A for Condition Line Item.
2. In Case 2 during MIRO, Variance Type showing value only B..
Please guide..

Hi
Check this thread
MIRO - Tax Code
Thanks !
E.Avudaiappan

PCM 10 Line Item details (BOM model)

Hi there,
What is the purpose of the line item details. has anyone already used this dimension and can explain what for?
Regards.

Line Item Details are exactly that: details of your line items.
e.g. You decided to spread all salary costs by the driver nr. of FTE's to your Activities.
But the salary cost has multiple components: base salary, bonus, pension, etc.
Now, LineItemDetails allows you to keep that detail out of the main PCM cube. This limits the amount of driver assignments you have to maintain, and is also good for performance (smaller cube!).
However, you lose the traceability (CostObjectValues can only be viewed by LineItemValue, and not LineItemDetailValue). But then again, it's not allocated differently, so you can always lookup the components of salary in a different report (on LineItemDetailValue table).
You need a LineItemValue rule to push the detail out of the LineItemDetailValue table to LineItemValue in order for this to work, e.g. :
Function CellValue
RestrictDimension("Line Items","Salary")
CellValue = LineItemDetailValue(,,,"Salary")
End Function

Send all line items of a sales order to IPC along with condition lines data

We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
Thanks

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

How to split a condition value across line items with varying percentages?

Hello, can anyone suggest how this can be resolved. This is the scenario.
My client wants to be able to determine pricing for a sales document with a wide range of conditions. One particular condition contributes to the total price of each sales item by determining a percentage of the total amount. The percentage used isn't a fixed percentage but it is determined as follows: Lets say I have 3 sales items in the document with prices 200, 300 and 500 respectively. The total amount for the condition (which is known) then has to be shared amongst these 3 items according to the price of each item. How can this be achieved? Any ideas?

You will have to define a Header Condition which will apply to all the Items.
Then, You will have to develop a Z- Requirement in T-Code - VOFM with help your ABAPer.
Then assign this Routine in Alternative formula for condition base value column in your Pricing Procedure.
The ABAP code in the Requirement will read the Basic Price of all the Items & then proportionately divide the value of said Condition line-item wise.
Hope this clarifies.
Thanks,
Jignesh Mehta

Creating Condition Table.. Key fields and line items

dear all
I am creating a Condition table and have 6 fields, I want to make 5 of them as key fields and also header line fields.
I want my 6th field as line item field but I am unable to do that. My last key field is also shoiwing in line item.
Please help.
Thank you.
Madhu.

Hi,
Check this thread
Re: VK11
Regards,
Chandra

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

Changing condition type values in Billing Doc Line Items

Hi All,
I want to change the value of condition types JLST and JCST to zero in the line items of proforma invoices. How can I do this?
Any function module or BAPI? Should I go for BDC?? I tried to find user exits. What can be the optimal way to do this?
Please help.
Thanks in Advance
- Neha.

Hi Neha,
You pass 0 (zero) to the field COND_VALUE in CONDITIONSIN table alongwith other relevant data.
And pass 'X' to the field COND_VALUE in CONDITIONSINX.
hope it helps.
saroj

Report for conditions per line item in Billing document

Hi all,
Is there any report that can tell me all the price conditions that are allocated to a billing document line item? I am talking about the actual conditions relevant for a line item, not only conditions that have a condition record setup.
So I would like to key in billing document number, the line item and get a report of all conditions that are allocated to that line item in the specific billing document.
If there is no such standard report, does anyone know what tables to link?
Thanks in advance,
Lars

Hi,
Tables VBRK and VBRP. And with field VBRK-KNUMV go to table KONV to obtain the data of all conditions.
Regards,
Eduardo

Report of condition types per line item in sales order

Hi all,
Is there any report that can tell me all the price conditions that are allocated to a sales order line item? I am talking about the actual conditions relevant for a line item, not only conditions that have a condition record setup.
So I would like to key in sales order number, the line item and get a report of all conditions that are allocated to that line item in the specific sales order.
If there is no such standard report, does anyone know what tables to link?
Thanks in advance,
Lars

Hi Lars,
In my current customer they had the same requirement and after almost 1 month of analysis we decided to build a custom report to execute this.
And as an enhancement we compare prices from the sales orders and the sap price records in order to check the differences.
First we need to find all the open lines (status and reason for rejection (ABGRU)), than loop KONV and select the KSCHL (condition types) you want, material text descriptions, etc.....of course a lot more in terms of coding.....;-)
This was the form I used :
FORM FIND_SO_PRICES.
LOOP AT IT_ITEM_REPORT.
    REFRESH IT_PRICING.
    SELECT KSCHL KBETR WAERS KPEIN KMEIN KUMZA KUMNE
      INTO IT_PRICING
      FROM KONV
     WHERE KNUMV = IT_ITEM_REPORT-KNUMV
       AND KPOSN = IT_ITEM_REPORT-POSNR
       AND KINAK <> 'M'
       AND KINAK <> 'X'.
      APPEND IT_PRICING.
    ENDSELECT.
    READ TABLE IT_PRICING WITH KEY KSCHL = 'XXXX'. -> My price condition
    IF SY-SUBRC = 0.
      IT_ITEM_REPORT-ZSP1 = IT_PRICING-KBETR.
      MODIFY IT_ITEM_REPORT.
    ENDIF.
    READ TABLE IT_PRICING WITH KEY KSCHL = 'XXXX'. -> My discount condition
    IF SY-SUBRC = 0.
      IT_ITEM_REPORT-ZSD1 = IT_PRICING-KBETR / -10.
      MODIFY IT_ITEM_REPORT.
    ENDIF.
   IT_ITEM_REPORT-LIQ = IT_ITEM_REPORT-ZSP1 - ( IT_ITEM_REPORT-ZSP1 * (
                                          IT_ITEM_REPORT-ZSD1 / 100 ) ).
    MODIFY IT_ITEM_REPORT.
ENDLOOP.
ENDFORM.                    " FIND_SO_PRICES
Please tell me if this helped you,
Regards,
Alcides Fialho

Condition type not getting populated at first line item of Sales order

Hi Experts,
We are creating Sales order through IDOC(Inbound function: IDOC_INPUT_ORDERS) for Document type ZXX then condition type is geeting populated at both line item, i have tried creating the Sales order through IDOC for document type ZYY the condition type is not getting populated in first line item, but for secod line item condition is getting populated.
we also checked pricing procedures related to this document types and we found these pricing types are mentioned in corresponding pricing procedures.
Let us know there are any other possible ways to find the same
please help.
Thanks!

Hi Rajani,
check the user exit in the FM..IDOC_INPUT_ORDERS
check if any filters kept for condition type field..
check the belwo user eixuts
ORDCHG I VEDB0001 Sales Ord. Change
ORDERS I VEDA0001 Sales Orders..
Regards,
Prabhudas

Condition in purchase order not distributed in line items

Hi All,
    I have a condition ZD21 (delivery charges) in purchase order. When i enter the condition at header level, it supposed to distribute the charges among line items. However sap put the entire amount in one of the line items.   The condition has condition class A (surchage), Calc typ B(Fixed Amt) and B as cond cat.   Header condition is selected (not item).
   Sometimes system populate an amount at the header level for this delivery charge.
How can i get the amount to distribute to all line items ? Also, where is the populated amount coming from ? Anyone with any suggestions ?
thanks
joyce

Hi Tej,
Group condition and Header condition were selected. I noticed that for other plants, the delivery distribution works but not for this plant. This wouldn't have anything to do with plants, right ?
What is the group based on for Group Condition ?   Thanks.
Edited by: Joyce Chan on Jan 10, 2012 2:54 PM

Table to link FI document number, line item and pricing condition type

Hi,
I am looking for tables to link the FI document number, line item and PO pricing condition type.
Appreciate any help on this.
Thanks.

For any PO in ME23n in which Goods receipt has happened, you can check in the itemdetails->Po history tab in ME23n.
Here you will find the material document number. Just click on the material document, it will take you to anpther screen here you will find a button for FI document.
Click that button for FI document. In PO history istelf you can see the Condition types.
Hope this helps.

User-exit that triggers everytime I change a line item and change condition

Hello Experts,
We are encountering an error wherein when we create a return order with reference
to an invoice and we create multiple line items with the same material, the succeeding
line items points to the wrong conditions in the reference invoice. Below is an example:
Original Sales Invoice 3010002390
Line Item No.     SKU          Quantity     Total Rebate Discount          Per Unit Rebate Discount
10          100315          10               128.07                    12.81
20          106666          10               128.07                    12.81
30          100338          10               243.86                    24.39
Return Order 1120000402 (repeatedly created with reference to the same sales invoice number)
20          106666          1               12.81                    12.81
30          106666          1               24.39                    24.39
For Return Order line 30, it should have picked the price 12.81 instead it picked 24.39,
which is the same line item with the original sales invoice.
I am using user-exit 'USEREXIT_NEW_PRICING_VBAP' and it triggers everytime I change the quantity of a line item.
But I tried to change the values in XKOMV and put 'U' in UPDKZ but it doesnt reflect when I view it.
Hope you can help me guys. Thank you and take care!

Thanks anyways...

Pricing Condition for Serivce Line Item

Hi Experts,
I'm trying to create a service PO with 1 Service line item and this service line item actually contains more than 1 service number. Using BAPI_PO_CREATE1, how can I define the pricing condition for each of the service number?
Currently, I'm able to define the pricing condition of the service item as a whole through this input parameter table POCOND.
Thanks.
Best Regards,
Weishan

Its really tricky requirement, when you are going for manual condition type.
- the best alternative to cater your requirement is to go for maintenance of condition record, which you can upload at mass with the help of LSMW. Also, will be really helpful in having report for pricing. Finally, reduce time to create sales order. Thus, discuss & encourage your user to maintain pricing based condition record. Only header condition should be on manual bases.
- If hard to convince your client on condition record. Then develop a routine with the help of ABAPer in your team. Where you can put logic. If the condition is manual enter and system is able find already entered value for material, then copy the price the slots where system don't find manually entered condition value.
Regards
JP

PCM - Conditional line items

Similar Messages

Maybe you are looking for