PCM installation on MS SQL 2008 R2

Hi Experts,
I am installating PCM 7.5 on MS SQL 2008 R2, but it gives me an error, the message is "Failed to connect to the Primary Server. The following error occurred: 80880007 Incorrect Database Version".
Is there a new installation which works for R2 version?
Thanks in advance.
Regards,
YH Seo

The error you are receiving is usually raised because of an incorrect database script. Did you check the output log file when you ran the script? SAP Note [1203230|http://service.sap.com/sap/support/notes/1203230] mentions this error message and how to check which script has been run in the database.
The Product Availability Matrix ([PAM|http://service.sap.com/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900001423]) for PCM 7.5 provides information on compatability between OS and DB. Also SAP Note [1562900|http://service.sap.com/sap/support/notes/1562900] indicates MS SQL 2008 R2 is supported with PCM 7.5 SP12. If you have further issues, please create a customer [message|http://service.sap.com/message] on the SAP Service Marketplace.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Similar Messages

Data Services 4.0 installation with MS SQL 2008

hey guys,
I am trying to install data services 4.0 on a windows server with MS SQL database as the repository database. So, my plan was to install MS SQL 2008 first, then IPS, then data services. But i am facing a problem in installation of MS SQL itself. I installed MS SQL with following features - database engine, client tools and management tools. The installation process was smooth and the sql server services (server and agent) both startup just fine. I installed a custom instance for the same.
But problem is when I open the management studio and try to connect to the database engine, it does not connect, I choose database engine as the server type, local hostname as the server name and windows authentication as the authentican type but it fails with the following error:
TITLE: Connect to Server
Cannot connect to <myservername>.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=MicrosoftSQLServer&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
BUTTONS:
OK
Any clues as to what is causing this ??? Or is it normal at this stage of installation ?? I am confused. I have already tried to reinstall the server, no good, nothing in the event logs either.
Thanks,
RS

resolved via following:
In the TCP/IP Properties dialog box, on the IP Addresses tab, several IP addresses appear in the format IP1, IP2, up to IPAll. One of these is for the IP address of the loopback adapter, 127.0.0.1. Additional IP addresses appear for each IP Address on the computer. Right-click each address, and then click Properties to identify the IP address that you want to configure.
If the TCP Dynamic Ports dialog box contains 0, indicating the Database Engine is listening on dynamic ports, delete the 0.u201D
Once I deleted those zeros and put in 1433 for TCP ports on each IP address, voila!

Change installation directory for SQL 2008 SP3 or CU

My C drive is full, Server built long time ago. Not enough space available in C Drive but other local drive have storage.
Is there anywhere i can use my other drive for patching or apply CU.
Env: win 2003 ,SQL 2008 SP1

My C drive is full, Server built long time ago. Not enough space available in C Drive but other local drive have storage.
Is there anywhere i can use my other drive for patching or apply CU.
Env: win 2003 ,SQL 2008 SP1
Hi,
Why dont you move SQL server user data file and log file from C drive to other drives this will create space. It would require a SQL Server restart
Refer this link
http://msdn.microsoft.com/en-GB/library/ms189133%28v=sql.100%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Visual Studio prevents SQL 2008 Express installation on win 8.1

I wanted to install SQL Express 2008 on my Win 8.1 desktop. It gives an error indicating that I should install Visual Studio 2008 SP1 first. I tried, but SP1 installation fails. I also tried to remove VS2008 completely but I still get the same fail when
installing SQL 2008 Express.
Now I cannot even install SQL Manager 2008, to manage database on SQL server.

Hello,
You should install SQL Server 2008 Express with SP3 included to make it compatible with Windows 8.1. Please try the following download:
http://www.microsoft.com/en-us/download/details.aspx?id=27597
For more information, please read the following article:
http://support.microsoft.com/kb/2681562
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

BPC-MS 7.5 SP5 Multi-Server Installation with SQL 2008

Hi Experts,
I have problem with multiserver installation. Even though installation user is SQL and OLAP administrator, installation lacks of creating Apshell OLAP database. OLAP server is using default port and we confirmed user can access this server. At the beginning installation user also could not create SQL database but we took Apshel.db9 and use Advanced Settings in installation and now installation process creates SQL Database but not OLAP database.
Actually our problem is not with creating Apshell OLAP Database we can import it from somewhere but this is the beginning of our OLAP connection problems. I do not know how many times we checked installation document and we installed Shared Features, ADO.net components etc..
Please see error screenshot [here|http://www.navis.com.tr/BPCMultiserverInstall.png]
Any ideas?
Thanks in advance,
Ergin Ozturk

Hi There
You need to ensure that the SQL Server has the correct protocols enabled, as per Bruno's post, you need to ensure that TCP / IP is enabled.
Additionally, you may want to ensure that the SQL Server is able to allow remote connections.
Please find below a link to a How To Guide on allowing remote connections to SQL Server
[http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx]
Hope this helps
Kind Regards
Daniel

Installation fails W.Server 2008, Sql 2008 R2

Hi,
I need help ASAP please !!
Im trying to install BPC 75 SP03 MS version, in Windows Server 2008, SQL 2008 R2 but I cant manage to get the installation done, an error is shown up and I cant go further even though I applied 2 different workarounds.
Please suggest something
Error:
15/09/2011 12:57:55 p.m. OlapVersion : : OLAP_VERSION_2005
15/09/2011 12:57:55 p.m. GetTimeMembers : End
15/09/2011 12:57:56 p.m. Validate base member of Time dimension. : Succeed
15/09/2011 12:57:56 p.m. Get information of ApShel from SQL. : Succeed
15/09/2011 12:57:56 p.m. Check Insight : Insight disabled.
15/09/2011 12:58:00 p.m. Connect to Olap server(BPCDEMO) :
15/09/2011 12:58:01 p.m. Step 2 : -- Create Olap DB.
15/09/2011 12:58:01 p.m. Step 3 : -- Create DataSource.
15/09/2011 12:58:02 p.m. Step 3 : -- Create DataSource View.
15/09/2011 12:58:02 p.m. Step 4 : -- Create Dimensions.
15/09/2011 12:58:11 p.m. -- C_ACCT : Fail
15/09/2011 12:58:11 p.m. CreateNewOlapDB : True - Message:OLE DB error: OLE DB or ODBC error.
Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'AppDef', Name of 'AppDef'.
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'ApShell', Name of 'C_ACCT' was being processed.
Server: The operation has been cancelled.
15/09/2011 12:58:11 p.m. Create ApShell : ========== END ==========
Workaround 1.
Open up SQL Management Studio
2. Go to Security > Logins > NT AUTHORITYLOCAL SERVICE
3. Right click > Properties
4. In the User Mapping section tick ApShell
5. In the bottom section of the screen, tick db_datareader
Workaround 2.
Install SQLSERVER2008_ASAMO10, SQLServer2005_ADOMD_x64 and SQLServer2008_ADOMD10_x64
Please help
Velázquez

Hi there,
Support for SQL Server 2008 R2 only became available in BPC MS 7.5 SP04
See [Note 1512045 - Planning and Consolidation 75M SP04 Central Note|https://service.sap.com/sap/support/notes/1512045]
Can you access and process the cubes/dims in SSAS?
Thanks,
John

Managed sql server installer has stopped working sql 2008 r2

I tried to installed sql 2008 r2 on my windows 7 but unfortunately I got message "managed sql server installer has stopped working"
1. I tried to program feature on and off feature
2. I checked setup file is corrupted or not setup file is well in condition
3. I turn on firewall too.
then again I tried to installed again same problem I faced.
please any different way to overcome from this problem!
regard Bishnu Khaling!

Hi Bishnu,
As Shanky’s post, you can post the SQL Server setup log files for analysis.
According to the error message, it is usually a problem with the installation of .NET Framework on the machine. However, from your description, you try to turn on the Microsoft .NET Framework 3.5 feature and still fail to install SQL Server 2008 R2.
Do you reboot your computer after enabling .NET Framework 3.5?
To further troubleshoot this issue, I recommend you perform the following steps.
1. Run the below tool to verify the state of one or more versions of the .NET Framework on the computer .
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
2. If .Net Frameworks 3.5 cannot be verified in step1, please use the
.NET Framework Repair Tool to repair it.
3. If there’s no problem with .Net Frameworks 3.5, and you also have .NET Framework 4.0 or 4.5 installed on the computer, please uninstall .NET Framework 4.0 or 4.5 completely. Then reinstall SQL Server and check if it is successful.
4. In addition, please make sure that the Windows 7 system is not damaged.
For more details about the error, you can also review the following blog.
Fix: Managed SQL Server installer has stopped working on Windows 7 | 8:
http://www.thewindowsclub.com/managed-sql-server-installer-has-stopped-working
Thanks,
Lydia Zhang

SQL 2008 SP2 installation

Dear Experts,
We recently under gone SAP Post go-live check. In the report SAP suggested for database patch updation.i am using standalone server,my SAP application is CRM 7. and database SQL 2008 SP1. I plan to install SQL 2008 SP2 . please answer me for the following Questions .
1) Is it really need to stop SAP application while installing SQL 2008 SP2
2) is it need to install SAP 2008 SP1 CU6 before installing SQL 2008 SP2.
let me know any steps to follow to upgrade SQL 2008 Swevice pack.
Thanks
Jyothish

Its not mandatory to update Cumulative updates (CU). You can apply SP2 without updating CU.
Cumulative updates (CU) are released by Microsoft every couple months. A CU contains fixes for issues in SQL Server, and it allows Microsoft to distribute fixes in between releases of Service Packs which come out a lot less frequently. CUs are intended to correct very specific problems. Microsoft recommends that CUs are applied only to systems that are experiencing the specific problems identified in the documentation for the CUs.
1495826 - Cumulative Updates for Microsoft SQL Server
Regards
Siva

Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!

Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
Steve

Hi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way?

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SQL 2008 Problem Calling an SP on an Oracle 10G Linked Server

Hi everyone
I've read through a number of posts on many sites about this issue but haven't found anything that has helped me so far. The machine I'm using is running Microsoft SQL Server 2008 64bit and the linked server I've created to Oracle 10G is using OraOLEDB.Oracle. If I test the connection in SQL Management Studio it succeeds and for any queries I have using OpenQuery to select from the Oracle DB I have no problem getting results.
The Oracle 32bit client and 64bit client versions are installed on the machine.
My problem is that I need to exec an Oracle SP which in turn inserts into various Oracle tables. I previously had this all working fine on 32bit SQL Server 2000 installation connected to Oracle 10G. Using the same code in SQL Server 2008 I get the following error:
Msg 7357, Level 16, State 2, Line 1
Cannot process the object "{CALL INTF.INTF_TW_PO_REQ_INTERFACE.MAIN(NULL, 15.000000, 0.000000, 'BLPO0099998', 'BLPO0099998', '', '', 39804, 21883, 'BLPO0099998', 249, 1, 950, 'Main', 190506, 37336, '1', TO_DATE( '20090706','YYYYMMDD' ), TO_DATE( '20090706','YYYYMMDD' ), 'INCOMPLETE',37336, {RESULTSET 1, P_Success})}". The OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE" indicates that either the object has no columns or the current user does not have permissions on that object
The call is made by the following piece of code in SQL:
SET @execCmd = N'SELECT
P_Success
FROM
OPENQUERY( ORACLE, '''+ @oracleCmd + ''')';
EXECUTE (@execCmd);
Where @oracleCmd = {CALL INTF.INTF_TW_PO_REQ_INTERFACE.MAIN(NULL, 15.000000, 0.000000, ''BLPO0099998'', ''BLPO0099998'', '''', '''', 39804, 21883, ''BLPO0099998'', 249, 1, 950, ''Main'', 190506, 37336, ''1'', TO_DATE( ''20090706'',''YYYYMMDD'' ), TO_DATE( ''20090706'',''YYYYMMDD'' ), ''INCOMPLETE'',37336, {RESULTSET 1, P_Success})}
I also tried using the below snippet from another post I found and got no joy either.
declare @result varchar(255)
exec ('BEGIN
?:= your_SP_Name(''arg1'', ''arg2'', etc);
END;
',@result OUTPUT) at your_LinkedServerName;
select @result;
OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE" returned message "ORA-06550: line 3, column 7:
PLS-00222: no function with name 'INTF_TW_PO_REQ_INTERFACE' exists in this scope
ORA-06550: line 3, column 1:
PL/SQL: Statement ignored".
I can't figure out why it doesn't work in SQL 2008 when it worked fine in SQL 2000 - PLEASE HELP!
Thank you
Alida Hope

Why development on 10g and production on 8i? Either both should be 8i or both should be 10g.
If you will keep production on 8i and development on 10g then you cannot stop such errors as there are features that are enabled by default in 10g and both the versions have very big differences.
Just go ahead and install 8i.

ColdFusion 9 Fails after SQL 2008 Cluster Failover

All,
I have a ColdFusion 9 app server that seems to be failing when my SQL 2008 cluster fails over to the passive node. By failing, my IIS server does not respond to any .cfm requests about 4-5 minutes after the failover. It serves out static and .asp pages just fine. Restarting ColdFusion server service and rebooting the server itself does not fix the problem. The only fix is to fail the SQL cluster back to the original node.
Specs are as follows:
SQL - SQL 2008 SP1 64-bit active/passive cluster VM
CF - CF9 running on Windows 2008 SP2 64-bit VM
Erick

Problem solved. We had a linked server defined in SQL that pointed to an Oracle instance. We could successfully run the "Test Connection" in SQL Management Studio for the linked server when our SQL 2008 cluster was on node 1. However, we got an "OraOLEDBpus10.dll: The specified module could not be found" error message when trying to test the connection when the cluster was on node 2. The fix was to add the Oracle folder path to the Windows PATH environment variable on node 2. The Oracle installer is supposed to do this automatically, so we don't know why it was missing.
The reason CF would become unresponsive was that we had a template with a query that used the linked server. The purpose of this template was to monitor the status of the linked server. Using CF Server Monitor, we were able to see active requests to that template which would keep running and not terminate even though we set a timeout value in CF Admin.
Erick

Problems install SCCM 2012 with remote sql 2008 r2 sp2

I am having issues installing sccm 2012 on a remote sql 2008 r2 sp2 server on a seperate instance.
I get the error "The network path was not found"
if i point it at the primary instance it will let me continue but i cannot install sccm into that instance.
I have turned off dynamic ports and set a static port but I do not see where i can enter that in the installer.
I cannot seem to verify is the ssb port is working correctly or not.
my account is local admin on both servers and a sql sysadm.
There is no firewall between servers.
Any suggestions?
Regards
Don

SPN is setup to AUTO register and is working. remote sql is not a cluster. Windows firewall on both servers is disabled. Sql browser is enabled and started. we have a group for system center that contains site servers and this group
is in the local admin of both servers and sysadm inside of sql server.
Why we are consolidating all or our lesser sql servers into a larger one.
Snipt of the log.
12/12/2012 2:57:37 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
], Exception details: [System.IO.IOException: The network path was not found.
Server stack trace:
at Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
at Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
at Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.Controls.Button.OnClick()
at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database ADMIN\master on server YSQL030.srf.local.
12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
], Exception details: [System.IO.IOException: The network path was not found.

SQL 2008 R2 small business server OS edition check fails on SBS 2011 premium install on SBS member server.

I am having trouble installing SQL 2008 Small Business Edition on top of MS 2008 std from the SBS premium suite. I recieve the SQL Server 2008 R2 setup log error stateing "Operating system supported for edition "Failed". The specific error is "EditionRequirementCheck
Failed" This SQL server edition is not supported on this operating system.
The SQL 2008 server is a valid SBS domain member server and sees the SBS domain just fine. I have tried re-installing the OS. Not selecting any options except the SQL engine, verbose logging as per How to diagnose "Operating system supported for edition"
pre-requisite errors while installing SQL 2008 Standard Edition for Small Business with no success. (no log.txt generated), enabled browsing, and other items with no luck.
I got the software from MVLS under the specific SBS 2011 premium section. It doesnt seem right or sees something to keep it from installing. The SBS AD box is clean with all FSMO and root functions assigned to it. There are no trust relationships or
child domains. I have licenses for 75 users. Of course there is no tool, log or utility to find what the actual issue the SQL installation is seeing. SOS! Help!!!

I meet all prerequisites that can be verified.
I am installing it on the SBS Premium Server 2008 R2 OS from MVLS with the ISO file ending in 29732.
I am on a valid SBS 2011 domain.
The new SQL box is joined to the domain as a member server.
THe SBS server contains alll FSMO roles and is the root of the AD.
There are no trust relationships or child domains.
There is NO way that I can find to determine the number of user and device licenses that it "senses" on the domain. I dont know which ones to count. I am licensed for 75 users and have less than that useing the network. There is no licensing monitor or meathod
I can find to actually verify what the SQL install sees.
I am doing all this logged in as the domain admin.
The troubleshooting steps at the bottom of the post refrenced do not work or I am doing them wrong. I cannot find an output file when I enable verbose logging for the SQL install. I believe if I figure out how it may point the way to the block. Thanks

SQL 2008 SP1 to SQL 2008 R2 Upgrade

I have a SQL server running SQL 2008 SP1 and am trying to upgrade to SQL 2008 R2. The server has an installation of SCOM 2007 R2 with CU4 on it with reporting services and SCOM data warehouse
The SQL upgrade advisor runs and tells me that Custom report items were detected on the report server and 3x Custom extensions or assemblies were detected on the report server
If I actually try to run the upgrade I get a 2 failures in the Upgrade Rules check:
No Custom Security Extensions and No Custom Authentication Extensions
I can see that the file rsreportserver.config has the custom entries relating to the scom data warehouse user so it is possible to change this file back to the original config file that was present before installing scom data warehouse and then run the sql
upgrade and then put the config file back?

Hi Mickpell,
Me too facing the same issue while upgrading from SQL 2008 SP1 to SQL 2008 R2. Getting below error:
No Custom Security Extensions and No Custom Authentication Extensions
Did u follow the steps you mentioned and it is Success???. Could you please confirm. If it was success, I can proceed with the same steps. Thanks in advance!!! I am
using SCOM 2007 R2 CU5. Should I download latest Hotfix Utility or CU2 utility is enough???
Regards, Suresh

PCM installation on MS SQL 2008 R2

Similar Messages

Maybe you are looking for