PCM stuck at 100% when using any audio program for the first time
I've had this issue for some months now after an update and couldn't find any solution anywhere so help would be appreciated.
First time I run an audio program after boot PCM gets stuck at 100% and can't be decreased. Also, i3status's PCM info switches from 77% to 850%. No idea if the previous is useful. The problem disappears once that program is closed and PCM is changeable again. I'm using alsa and the chip is Conexant CX20551 (Waikiki), the issue persists even if I add the user to the audio group.
Last edited by Minato (2013-07-14 11:34:10)
I replaced the symlink with a folder named "Pictures" and it actually worked. At least a new menu shows up. BTW Photoshop Elements does not complain.
Similar Messages
-
When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Hi,
I have only just upgraded to iOS 7 on my iPhone 4 and am having a problem with Viber. When my phone came on for the first time after the update I could see I had 2 new viber messages, when I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone...
I still have an itunes backup of my phone just before the update, I restored it to this backup, followed the same process and now viber will not even work (the access code wont sms to me and the phone call option for recieving this code also come up with some error about not being able to do this at this time).
I have been able to access viber using another phone number (I have two sims which I use as I am currently overseas in south korea, my referenced australian sim has worked previously on viber overseas and I definently do have roaming on) but again I have no message history.
So to questions:
1) Why is my activation not working under my referenced australian number?
2) Can I recover all my message history which should be saved in my itunes backup? I am willing to revert to this backup state again if needed.
Please help.
Thanks.Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.
-
How does one get to use their apple id for the first time?
I registered for an Apple ID, which was successsful, but i can't seem to use it, because everytime i try to use it on iTunes it says I have never used this account before, and directs me to the review option which i select but it does the same thing all over again and I can't upgrade to the latest version, because System Preference is failing to open when I try to open the **** thing
Hi RegoAntony,
I apologize, I'm a bit unclear on the exact nature of what you are describing. If you are trying to use your Apple ID for the first time in the iTunes Store, you may find the following article helpful:
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
Regards,
- Brenden -
I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!
Previous user installed iOS 7 beta on that iPhone.
Take it back and get your money returned. You
are running into a new security feature. Whoever owns
the ID that it is asking for is the only person who can
remove the security. That iPhone is worthless to you. -
Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?
I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?
-
When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?
Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on? -
Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the internet. But I still get the error: "itunes could not contact the iphone software update server because you are not connected to the internet." I also connected via iTunes and authorized the computer, but still have the same issue. Really, all I need to do is completely wipe the phone and start from scratch for safety's sake.
Help?Did you check your security software settings?
Third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software. -
i used my i pad for the first time to take pictures and videos. Do I download it on my I mac before using it as a power point presentation? I also want to separate my pictures and my videos? This also the first time that I'm using the apple support communities.
You can import the videos and photos using iPhoto or Image Capture on your Mac.
Connect the iPad to the Mac with the cable and launch either of those two applications on the Mac. Your iPad should appear as a device in the left side of the app. Click on the iPad name and then you should have access to all of the photos and Vidoes in the camer roll and you can import them onto the Mac.
Im not sure what the reference is to Power Point in this case. You can use the imported photos and videos in a Power Point presentation after you import them to the Mac.
Are you trying to create a Slide Show on the iPad? Is that what you mean by a Power Point presentation? -
Norton antivirus says my licence have expired when switch my computer on for the first time.
I just bought new touchsmart 520-1002 ru (LN649EA). It had norton antivirus preinstalled when i started it for the first time. After few hours of working antivirus informed me that the licence have expired. But before it was like 60 days. What to do? I'm affraid of sirfing the web without antivirus protection. So i'm using iphone. May be i should return it and buy second hand mac?
Hello Karuser:
Welcome to HP's forum and your new computer. Nothing to worry about. That was a trial verson. What ever time limit they gave it has expired. I think you miss read it It flashes a reminder all the time. You can still use your computer. Until you purchase or install an anti virus software. The only thing Norton will not do is up date it's self but it will still scan your computer when you open it up and click scan. Try to get anti virus software. Titanium Maximum 2012, McAfee, and Norton are the top choices to choose from. Try to stay a way from the real cheep ones like Kerpsky that will not protect your computer. My freind installed Kerpsky asked to fix his lap top. Well I did fix it first thing I did was get it on line and run Trend House Call it found over 250 different virus. Some of the worst ones I had to manually removed. Trend House call is a free scan. Trend.com are the one who make Titanium Maximum Security 2012.
You just bought this computer Mac's are great computers but you are very limited to what you can do on them. This one will last you for a very long time ounce we get the bugs out it. My Touchsmart 600-1050 is going strong going into it's third year now. Just had it's frist full recovery done now my computer runs faster and much better then when I first bought it. Yes I had some minor issues fixed on it at first like anything you buy today is not perfect HP covored it all during the one year warranty. My recovery was performed because I picked up a new virus that no anti virus on the market could delete it had to be manually delete it but to much damaged was caused in the operating control software. Otherwise I would be still using Oginal set up. -
When tried to login WebConsole for the first time 404 not found error got
Hi All,
We have recently installed MI 7.0(NW2004s) and configured also as per the configuration document. But when we tried to login WebConsole we are getting the error of 404 not found. I donot know what and where I have test to login to WebConsole.
Is there any way how to test to login to WebConsole for the first time.
Appreciate your help.
Regards,
Ameer Baba.Hi Ameer,
Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
Regards,
Satyendra -
App freezes when JComboBox.addItem is called for the first time
I have a Swing app that intermittenly freezes when the users go
to a certain screen. I've tracked it down to a specific line. There is
a JComboBox on the screen. The application freezes when the
app tries to load the first item into the JComboBox using
myComboBx.addItem(Object o). I pass in an Integer.
The strange thing is that this only happens once a day, or
sometimes less, in a group of 4 users. But when it does
freeze, it always freezes on that line. After freezing, the user
can go back into the app, and go to the same screen(no
data has changed), and they can get in without it freezing.
So it seems to have nothing to do with the data - it's purely
intermittent.
The only thing I can think of is that the underlying native peer
for the JPanel that the JComboBox is on, has not been created
yet, and I'm trying to load an item into a combo box that doesn't
really exist yet. Anyone know if this is possible? It may only
happen when the user's machine is running very slow.
I've included the relevant code below. Any feedback would
be greatly appreciated.
Most of the action happens in the class ICS_COMP_PANEL.
First, in a different class, an object of type ICS_COMP_PANEL
is created, and then the method startCompensationScreen is
called on that object. From then on, methods of
ICS_COMP_PANEL are called. The app freezes on the
COMP_NAME.addItem(retObj) call in the method
addCompensationRecordsToScreen.
In another class:
screenComp = new ICS_COMP_PANEL(this);
screenComp.startCompensationScreen();
public class ICS_COMP_PANEL extends javax.swing.JPanel
implements java.awt.event.ActionListener
, java.awt.event.ItemListener
//this is the comboBox that's causing the problem
javax.swing.JComboBox COMP_NAME = new javax.swing.JComboBox();
public ICS_COMP_PANEL(ICS_FOLDER iFrame)
COMP_NAME.setEditable(true);
jpanel1.add(COMP_NAME);
COMP_NAME.setBackground(new java.awt.Color(204,204,204));
COMP_NAME.setFont(new Font("Dialog", Font.BOLD, 12));
COMP_NAME.setBounds(357,7,156,15);
public void startCompensationScreen()throws GException
//The line below always gets a non-empty hashtable back
//from getCompensationRecords().
Hashtable compList = getCompensationRecords();
COMP_NAME.removeItemListener(this);
addCompensationRecordsToScreen(compList);
COMP_NAME.setSelectedIndex(0);
loadCompensationRecord((Integer)COMP_NAME.getSelectedItem());
COMP_NAME.addItemListener(this);
//the only thing to notice in this function is that it loads a hashtable
//with Integers as the keys and as elements
private Hashtable getCompensationRecords()
Hashtable compList = new Hashtable();
try{
String SQLStatement = "select comp_tran_number from comp_tran_record where
comp_ic_tran_number = " + FOLDER.caseNumber;
gifts.database.ResultSetCopy rsc =
gifts.global.standardData.ICSServer.resultSetCopier(SQLStatement);
while ( rsc.next())
Integer compNum = rsc.getInt(1);
compList.put(compNum,compNum);
catch ( Exception ex){
GTool.errorMsg(this,ex);
return compList;
private void addCompensationRecordsToScreen(Hashtable compList)
System.out.println("add compensaion:");
Enumeration e = compList.elements();
COMP_NAME.removeAllItems();
while ( e.hasMoreElements())
Object retObj = e.nextElement();
if ( retObj instanceof Integer)
//The next line is where the app freezes
COMP_NAME.addItem(retObj);
//This should not get called because the itemListener is removed
//before the JComboBox is filled.
public void itemStateChanged(ItemEvent e)
// This method is derived from interface java.awt.event.ItemListener
// to do: code goes here
System.out.println("change Item");
Object object = e.getSource();
if (object == COMP_NAME)
Object retObj = COMP_NAME.getSelectedItem();
if ( retObj instanceof Integer && COMP_NAME.getSelectedItem() !=
currentCompensationRecord)
reloadCompensationRecord((Integer)retObj);
Thanks,
Greg Sheridan
GIFTS Software Inc.
New York, NYI am facing a similar problem with JComboBox. It is responding to the first time when items are added to the combo box. Later on, listener does not seem to listen if items are added to the combo box. Can anyone think of a solutiuon for this problem. (it works fine in 1.3 but does not respond in 1.4)
-
I can't use my apple ID for the first time on iphone
I am trying to download Whatsapp.
When I enter my iphone apple ID, I can't tap "Next" beyond the "select your country" first step (it is the first time I use my apple ID on itune).
I use a 3g IOS 4.2.1 and the software is as up to date as it can be.
How can I make the button "Next" appear please?Hey sd_0008!
I have an article here that can help you with setting up your Apple ID. It will provide instructions on how to do this through a computer or an iOS device, and it can be found here:
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/ht2731
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Apps bundle suggested when I joined apple store for the first time
I just set up my new ipad, and on the first time when I got on the apple store, a small screen for a bundle of apps was suggested, for word processing and find my ipad and other usefull apps, I should have chosen to download them all in one go, but I didnt, how can I find it again without going to look for each individuale app manually.
Follow the procedure described in the link below to get the free apps:
http://ios.wonderhowto.com/how-to/get-your-free-ilife-iwork-ios-apps-after-resto ring-from-backup-0149021/ -
Advice For Someone Using A Professional Printer For The First Time
Hello everyone
1. I'm doing some posters and flyers for my club using Pages. We've got them looking how we want on my home inkjet printer but now we need someone to print out large quantities. I've never used a professional print service before. There are simply loads of posts on this topic but I wonder if there is anyone out there that does this a lot and can tell me how they do it. I was hoping to initiate the definitive Professional Printing FAQ thread.
2. Reading the numerous posts, there are lots of terms that I don't understand like 'bleeds' and 'pantone'. Understandably, print is a whole new world of technical terms. Can anyone recommend a good introduction to all this on the web?
ThanksI don't know of a good basic FAQ for printing, but I can try to address some of your issues.
What is a "large quantity", IanB? Tens, hundreds, thousands? In my experience this is probably the most critical issue, since it pretty much determines the printing method used (and thus the cost). Anything under about a thousand copies will these days likely be printed "digitally", which essentially means run off on a colour laser printer. In my experience, as long as you are not fanatical about colour accuracy, this method is very forgiving of the way the source file is set up, and most houses will take standard PDFs. It is much more expensive on a per-unit basis than offset printing, but there is also little/no "set up" cost, which means that for short runs it is often far more affordable in terms of total cost.
Once you get to big runs, where you need offset printing (presses that use metal plates for different colour inks), things change a fair bit, as you have to deal with colour separations and possibly spot (Pantone) colours as well. The setup costs for this kind of printing can be very substantial (making metal plates is expensive), but once set up, the cost per unit is far less than digital printing. If this is your first time out, I'd suggest either avoiding going this route, or finding a very understanding print shop that is willing to hold your hand through the production process.
As for bleeds, that refers to when objects on your document go all the way to the edge of a page. The problem with using bleeds is that they require the printer to print the page on a larger physical piece of paper, with the bleeding objects slightly over the desired edge, and then trim that paper down to size, cut so that the bleeding section is cut through (to avoid a white unprinted edge). But because the cutting is not always absolutely accurate, you need to leave space between the edge of the page and any material that absolutely has to be on it (e.g., text), so that the trimming will only cut away some of the bleed, but not the critical material.
Bleeds make setting up (and printing) your document much more complicated, and you will be much better off if you can avoid bleeds for your first experience doing professional printing. If not, I'd again suggest that you shop around for a print house that says they'll be willing to walk you through the process of how to format your document to do this.
I'm sure others here that are more experienced in the printing process can point you to more comprehensive resources, or give you more detailed advice.
Maybe you are looking for
-
Problem related to display column's full length as default in table control
Hi Experts, I have a screen in report program. In that a table control has been designed. Now the issue is that when report program has been executed and the table control screen is called on a particular action then the table columns full length is
-
Hi! I've a requirement to read some barcodes inside PDF files. I actually can read from images, but can't find how to read them from a PDF. Someone has done this? Or maybe some suggestions to convert PDF to image, in that way I can read the code from
-
No internet access after 1.1.3 update
I just updated my iPhone to 1.1.3 and I can no longer reach the Internet over wifi. Even though the phone says it's connected to my home router, Safari always says "Safari can't open the page because it can't find the server" no matter what URL I poi
-
I am creating a blank file in which one blank line is getting created.. Is there any way to solve this... I have below config. Acknowledgement.fieldFixedLengths 1 Construction Mode: create Put file: directly File Type:
-
Hi, I am new to AJAX. Currently i am working with JSP, Sruts, tomcat environment. How do i start learning AJAX. can anybody direct me thru proper road. THANKS AE