PCMCIA card stopped working

I have two identical PCMCIA 802.11b cards with lucent chipsets in them. When I upgraded all my packages yesterday they stopped being recognized.
When I plug one in my dmesg output is: pccard: PCMCIA card inserted into slot 0
here is a list of the packages I updated/installed
[2008-09-15 07:12] synchronizing package lists
[2008-09-15 07:12] starting full system upgrade
[2008-09-15 07:14] synchronizing package lists
[2008-09-15 07:14] starting full system upgrade
[2008-09-15 07:14] upgraded cracklib (2.8.10-5 -> 2.8.12-1)
[2008-09-15 07:14] upgraded pcre (7.7-2 -> 7.8-1)
[2008-09-15 07:14] upgraded glib2 (2.16.5-1 -> 2.18.0-1)
[2008-09-15 07:14] upgraded gtypist (2.7-1 -> 2.8-1)
[2008-09-15 07:14] upgraded hwdetect (0.9-1 -> 0.9-3)
[2008-09-15 07:14] upgraded inputproto (1.4.3-1 -> 1.4.4-1)
[2008-09-15 07:14] upgraded jfsutils (1.1.12-2 -> 1.1.13-1)
[2008-09-15 07:14] upgraded libdrm (2.3.0-1 -> 2.3.1-1)
[2008-09-15 07:14] upgraded libtasn1 (1.4-1 -> 1.5-1)
[2008-09-15 07:14] upgraded libxau (1.0.3-1 -> 1.0.4-1)
[2008-09-15 07:14] upgraded xcb-proto (1.1-1 -> 1.2-1)
[2008-09-15 07:14] upgraded libxcb (1.1-1 -> 1.1.90.1-1)
[2008-09-15 07:15] upgraded libx11 (1.1.4-2 -> 1.1.5-1)
[2008-09-15 07:15] upgraded mdadm (2.6.4-1 -> 2.6.7-1)
[2008-09-15 07:15] upgraded pcmciautils (014-4 -> 015-1)
[2008-09-15 07:15] upgraded sdparm (1.02-2 -> 1.03-1)
[2008-09-15 07:15] upgraded xfsprogs (2.9.8-1 -> 2.10.1-1)
[2008-09-15 07:15] removed quodlibet (1.0-3)
[2008-09-15 09:04] installed faad2 (2.6.1-1)
[2008-09-15 09:04] installed libmikmod (3.1.12-1)
[2008-09-15 09:04] installed libmpcdec (1.2.6-1)
[2008-09-15 09:05] installed libsamplerate (0.1.4-1)
[2008-09-15 09:05] installed libao (0.8.8-2)
[2008-09-15 09:05] ==> mpd: Create a config under /etc/mpd.conf before using MPD (Example: /etc/mpd.conf.example)
[2008-09-15 09:05] installed mpd (0.13.2-1)
[2008-09-15 09:05] installed ncmpc (0.11.1-5)
[2008-09-15 09:05] installed mpc (0.12.1-3)
[2008-09-15 19:01] synchronizing package lists
[2008-09-15 19:02] synchronizing package lists
[2008-09-15 19:02] starting full system upgrade
[2008-09-15 19:03] upgraded libtasn1 (1.5-1 -> 1.5-2)
[2008-09-15 19:03] upgraded man-pages (3.08-1 -> 3.09-1)
[2008-09-15 19:03] upgraded openssh (5.0p1-2 -> 5.1p1-1)
My PCMCIA slot works with a really old dlink airpro a/b card. So it is not that.
Any ideas?

I'm having this exact same problem. While irritating, I have a temporary workaround, although I would like to be able to use my PCMCIA cards without it.
To use the workaround, add the following to /etc/rc.local:
pcmcia-socket-startup

Similar Messages

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!

When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3. I want to sych with iTunes but clearly must upgrade to >10.1
When I do, my network card no longer works on my desktop. Please HELP!
My spec is;
NETWORK CARD;

polydorus wrote:
This isn't my thing, but the following post on this seems to have helped some people:
http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.)

32g sd card stopped working ,is there an answer to correctig problem ?

32g sd card stopped working , is there an answer to correcting problem ?

take it out and put it back in
reformat it
have you tried it in a pc with card reader?
buy a new card?

Sdhc cards stopped working with 10.9.1 update

sdhc cards stopped working with 10.9.1 update. I've tried multiple readers with no affect. Any ideas?

Have you checked for an update and/or asked the developer for help?

After Software Update 2007-004 airport card stopped working after wakeup

Hi,
I have a powerbook G4 - DVI running 10.3.9. After I have installed Software Update 2007-003, when my computer goes to sleep and then wakes up, airport card stops working. I had to open the back of the computer, unplug and plug the airport card, then it starts working again. But next time the computer goes to sleep, it stops working again.
Does anyone have a similar problem? Any work arounds?
Thanks in advance.
Also following is the logs from Software Update. Looks suspicious:
Mac OS X Version 10.3.9 (Build 7W98)
2007-04-28 18:56:03 -0400
2007-04-28 18:56:03.190 loginwindow[181] FSResolveAliasWithMountFlags returned err = -43
WirelessScan timeout waiting for first scan result
WirelessScan timeout waiting for first scan result

Deleting AppleAirPort2.kext solved the problem for some...
http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
While others had to rollback the AppleAirPort.kext to version...
http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

Getting Wireless PCMCIA card to work

Attempting to get a Linksys wpc54G wireless PCMCIA card to work on my 1.5Ghz G4 PB.
I verified that the card works, by plugging it into to a PC.. ( works fine)
Plugging the card into my pcmcia slot, on nothing. No lights.. nothing.
I get the PCMCIA icon on the menu bar, three options
unknown vendor <-grayed out
Network controller <-grayed out
Power card off.
I read where there might be some hack that I have to do to get PCMCIA support running, but no clues after that.
Any help is greatly appreciated...
Larry

Hi,
When I got my PCMCIA wireless card (not Linksys) it came with an install CD. The G4 maybe wouldn't of known what it was or what to do with it on it's own, needed the install feature.
Works fine once installed. Did you get an install CD for it from Linksys? For the Mac OSX? If not, it might pay to check their web-site for one.

Satellite A - LAN card stopped working

I purchased my A series in April 08 and a few weeks ago the LAN card stopped working. It just won't connect and can't get emails and doesn't connect to any web pages.
Currently have the computer working off wireless but does anyone know how to fix the LAN Card problem.

Hi!
Which Satellite notebook do you have exactly?
Does the notebook recognize a LAN cable if you plug in it? Is the LAN connection enabled in Windows?
Try to update the LAN driver and the BIOS. Both you can find on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

5233 Memory card stopped working!

Hi,
I've had this phone for almost a year, it's good but there have been few problems.
I have an 8 GB memory card, which I had to reformat recently. Today I was downloaded a theme from nokia store. But suddenly my memory card stopped working. I re -inserted it but it doesn't show on phone.
56 MB of my phone memory and 6.5 GB of my external memory is free. I cant reformat cause memory card is not showing on phone.
Another problem that's appeared is that while typing, if move the cursor back it goes through each alphabet instead of each word.
3rd thing is wen I first posted here there was an option that allowed me to check response via email. Its not here anymore.
Please help all my data is on memory card.
Regards
Solved!
Go to Solution.

Hi mtank,
Thanks for your post.
If the memory card can't be read in the phone try your memory card in a cardreader connected to a PC to verify if the card is readable still. If it is copy all content to the PC and format the card. Then check the card in the phone and if it is accessible copy all content back to it from the PC. If you still can't read the card on the phone replace it with a new one. You can copy the original content to it from the PC first.
Hope this helps,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

My SIM card stopped working, is that an issue to address to my phone carrier or to apple?

My SIM card stopped working, and I have no idea why. I've had my phone for four months... Who can I bring it to to get it fixed?

Is there an error message? What is the exact wording of that message?
Remove the sim, clean the contacts, reseat the sim.
Go to your wireless provider and get a new sim.
Make an appointment at your local Apple store to have the iPhone evaluated.
http://www.apple.com/retail/geniusbar/

After Service, Airport card stops working randomly on macbook pro 17" early 2009

Hi,
So after the last time my computer was serviced, the airport card stops working randomly on moving the screen.
Upons restarting the computer, it sometimes says wi-fi hardware not installed. Then, if I move my machine around,
lift it up, turn it around, place it back on the table and restart it, it works again. I don't understand this.
And all this started happening the moment my warranty ran out. Extremely frustrating!!

It may be possible that one of the following may be the issue:
The internal AirPort Extreme card is not seated properly.
The internal Wi-Fi antenna connector is not seated properly in the AirPort Extreme card.
The internal AirPort Extreme card's connector is faulty or damaged.
The internal AirPort Extreme card is faulty.
To get an idea on how the Extreme card is installed, please check out the following iFixit article.

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

Graphic card stops working, then recovers

I recently installed the plug-in for Pixel Bender on CS5.
When I open a jpg, and choose OilPaint, with the check box for GPU, as soon as I hit the OilPaint filter, my graphics card stops working, the screen goes black for a few seconds, then comes back on. I get a message that the card stopped working, but recovered.
I surmise this is a graphics card issue, or memory, or both? I don't know for sure.
I'm using an HP PC with 6 Gb RAM, and the card is a Nvidia GeForce 9500GT. The drivers for this card are all up to date.
CS5's performance settings are: 2 scratch discs (not the boot drive) with nearly a terabyte free space on one, and about 250 Gb on the other. The program shows about 5.7 Gb of available RAM, and the preferred setting (maximum) is about 3.8 Gb. I've got it at 3.7 Gb.
When the card recovers, it takes several minutes before I can see the image in Photoshop again. Then, when I try the filter again, I uncheck the GPU box, click on the OilPaint filter, and get a window that says the process timed out, and gives me 2 options: try again or cancel. After about 6 or 7 try-agains, the image will have the filter applied. It takes another 5 or 6 tries to finish with "OK" and then the image shows up in the pane, in Photoshop.
My computer has a 350W power supply, so the GeForce 9500 GT is the biggest card I can use in it.
Is it a question of an inadequate graphics card? Or, not enough RAM?
I could install a new power supply for the PC, then get a different card, if that would solve the problem. But, since I'm not sure if this is what I need to do, could I please have some suggestions on my issue with this whole thing?
Thanks very much.
Alan

Thanks for those links. I missed them, because I just had Windows search for updated drivers, and when I told it to search online, it said that the drivers were up to date. So....well, I'm sorry I didn't check NVIDIA directly. I appreciate your help in this.
Anyway, I did install the updated drivers. I rebooted the machine, just to make sure (I checked the properties of the card, and it showed the updated driver listed).
I re-tried the OilPaint, and the card crashed, as before. It gave me this message:
"The NVIDIA OpenGL lost connection with the display driver and is unable to continue. The application must close." It then closed CS5 (Bridge remained open, though).
It said there was an Error code: 8.
Thanks again for assisting me on this. What would be the next step to resolve this?
Alan

Satellite A210-1AP - video card stopped working playing Call Of Duty 4

Hello,
I am having problems with my video card.
When I was playing call of duty 4 in 5 minutes my video card stops working and screen restart.
Then it says Your video card stopped working, and problem solved.
My video card is ATI Mobility Radeon HD 2600.

> Then it says Your video card stopped working, and problem solved.
And? Is it working now?
Possibly the graphic driver hung and therefore you received this message.
Its also possible that the GPU temperature was too high and therefore the message appeared.
The COC 4 needs a lot of hardware resources and everything must run with full performance! Therefore there is higher heat dissipation and this can lead to graphic card issues.

Amd-display adapter-ATI Radeon Graphics Cards stopped working

solve a problem with AMD-Display Adapter-ATI Radeon Graphic. AMD-Display Adapter-ATI Radeon Graphics Cards has stopped working 4 times,last occurring on 1/15/2015 7:47AM

Hi @robinsondiane52
Welcome to the HP Support Forums!
I understand that you are having trouble with the display adapater for your system. I am happy to assist. Firstly, please post the full product number and verify the operating system in use on your notebook. See the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Has anyone gotten the FBUS PCMCIA card to work on a PCI to PCMCIA adapter board?

I have lots of success with the PCMCIA card in laptop PCMCIA slots, but no luck with the PCMCIA card in a desktop PC with a Quatech PCD-B/PCI-E PCI adapter for PCMCIA boards. I am thinking that my problem resides with the adapter board but I would like to know if anyone has had success with the FBUS series 2 PCMCIA card with a PCI to PCMCIA adapter. I got a WinXP SP2 IBM ThinkCentre desktop. Thanks

We have ever used some PCMCIA to PCI adaptors, they are working properly with NI PCMCIA-FBUS card as well as NI-FBUS software.
I'd like to recommend the single CardBus PCMCIA slot adaptor from Elan Digital System:
http://www.elandigitalsystems.com/adapter/pci.php
We have used the adaptor in a Dell Dimension desktop, running XP SP2, and NI-FBUS Configurator 3.1.1 runs well.
Another adaptor is a long card, which is Gigabyte GA-MPCI, it works well with some old desktops, but the length of the card is about twice of the card of Elan Digital System; it might not fit your requirement.
Hope it helps.

PCMCIA card stopped working

Similar Messages

Maybe you are looking for