PCMCIA-FBus Series 2 is not recognized under Windows XP

I'm trying to get a PCMCIA-FBus Series 2 card work under Windows XP Professional SP2 toghether with an Elan P111 PCI to PCMCIA Adapter, but when I plug in the card Windows does not recognize it - I only get a "pcmcia unknown_manufacturer" message and no driver is installed.
I've tried to install the driver manually, but then I get an error code 10, Device could not be started.
The Computer is a Dell Optiplx 740, AMP Athlon 64 X2 3800+. NI-Configurator v3.1, v3.1.1 and v3.2.1 have been tested. The Elan P111 driver is PSeries v5.07.08.

Hi,
I am not sure whether this PCI-PCMCIA adapter works well with Windows XP SP2. I suggest that you also contact the adapter manufacturer for the compatibility issue.
We did do some test on Elan PCI-PCMCIA adapter, but I am sorry that we are unable to make verifications on all kinds of hardware and software combination. There exists the possibilities that the adapter does not work on some PC's.
Another suggestion that you can try is to install the PCI-PCMCIA adapter driver on a clean Dell Optiplx 740 (Windows XP SP2 without Microsoft hotfix ). I think this can help you identify whether there are compatibility problems between the adapter and system.
Regards
Feilian (Vince) Shen

Similar Messages

MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue?

Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

MTP USB Device not recognized under Windows 7 Ultimate

Hey everybody, I'm sure there are plenty of similar threads about this issue, however I haven't seen any with Windows 7 as OS.
My problem is in the recognition of the driver, since the MTP device is not working properly. I've tried alot of possible solutions, but none of them have worked, i.e the removal of the driver in device manager, tried a custom script for the inf file, deleting of all USB/portable related drivers.
Its sad that no recovery tools are yet compatible with Windows 7, atleast not that I'm aware of.
Please, throw some more suggestions/ideas! My Zen works perfectly fine under XP btw.

I was having the same problem with my Zen Vision:M under Win7 Ultimate 64-bit.
No matter what I tried from deleting the usb root hubs and reinstalling drivers, nothing would get the mtp usb device driver to load.
I found that the mtp usb device driver will load correctly as long as you are plugging the USB cable into a direct port and not running it through a USB hub. At first I thought it might be due to an incorrect USB voltage, but the hub I'm using is a powered Belkin hub. Very strange!
So give that a shot -- run the USB straight to a port out the back of your computer. Don't use a USB hub or ports off your monitor since that is actually a hub as well.
Good luck!http://forums.mycreativefansite.com/...ify_inline.gif

802.11ac not recognized on Windows 8.1 Pro under Boot Camp.

I just installed Windows 8.1 Pro under Boot Camp. The issue I am having is that the 802.11ac network is not recognized in Windows. Windows only recohnizes the 802.11n network. When I boot up OSX Yosemite, It works as usual. Anyone else have this problem?

8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
purchase a retail 8/8.1 license
use only a USB2 flash drive
get a clean 8 or 8.1 ISO
newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
if you want to try without clean installing OSX, here goes
open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
restart machine and do a PRAM reset
open du and repair permissions TWICE
open bca and choose all 3 options (create, download, install)
from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
clean ISOs
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

Device not recognized by Windows or iTunes - Blinking green light

When I try to connect my iPod shuffle to my computer (Windows XP), it's not recognized by Windows or iTunes. (i.e. device does not appear in Windows explorer or iTunes) While in the USB port, the Shuffle's green light blinks incessantly. My wife uses an iPod on this machine (under separate user name) and has no problems.
I've tried updating software (iTunes, iPod), restarting my computer and resetting the iPod to no avail. My machine is not on a network. The USB port(s) work fine as I can use my memory stick (no USB cable) with no problems. I've tried connecting my Shuffle under my user name as well as my wife's. Same problem.
Also, I had my Shuffle setup on an old computer (PC, Windows 2000) and it still works fine plugging into that. (I'm getting rid of it soon, hence why I'm discovering these new problems).
Please advise. Since my Shuffle is over a year old, I am not eligible for online chat or phone support without paying for an Apple Support agreement.
I know there's another thread with the same issue that was not resolved on the discussion board.
Thanks to anyone who can help.

Recently I used my ipod at work all night, just like normal. After work on the way home, like normal, I plugged it into my aux port on my car's head unit, and plugged it into power. 10 minutes later, in the middle of going over Ortgea Highway(hiway 74 between Orange and Riverside Counties), it just suddenly stopped working. When I plug it into any of my computers at home, nothing happens, it is not recognized or seen. When I plug it into power, it displays either a "sad ipod icon" or a battery with exclamation mark(!) icon. I have brand new power adapters both for the car and home, plus brand new usb cables, thinking that would help. It hasn't and now, since I opened those packages, I am out that $$ and ******. Since I received this unit as payment for electrical services rendered, I have no idea how old it is. Does anyone have any ideas? ([email protected])

Ipon not recognized in windows or itunes

my ipod is not recognized in windows or itunes, but i have a shuffle that is able to be recognized. when i connect my classic to the computer it starts charging but that is it. i know there is a 5r repair but i have yet to do it bc if i have to reinstall itunes i am worried about my music and whether or not i will have to re-add all my music again manually. i have several thousand songs that i have all the artwork for and all song info poosible and it would just take forever. any help would be great. thanks.

I had the same problem just after downloading latest version of itunes. 5 r's didnt work. Device was recognized on my daughters's computer. I also got windows error saying new hardware would not work properly. I eventually got advice to update the ipod driver by going through start menu and'Control panel' (with a right) click and finding "ipod" under device manager. Right click on that and select update. Once it was done my ipod was recognized by both itunes and computer. Now seems to be working fine and no loss of library/music. Hope this may be of some use

Plays & lights work but NOT recognized by Windows/iTunes & won't charge

It's a shuffle 512mb from a few months back and worked perfectly until last week. It continued to play as usual, but is no longer recognized when i plug it into ANY computer (i've tried about a half dozen)! I've followed every suggestion and recommendation from both the Apple Support and the discussion groups relating to my problem though it seems no one has experienced my specific ordeal. I am quite limited as it is not recognized by Windows. I tried searching for it as a "media device" but nothing. All the fucntions and lights work while playing, but there is absolutely no response when connected to a PC. When this charge goes, i'll be without my tunes!
Any help...
Thanks
Shuffle 512mb Windows XP Pro

AppleNEve wrote:
I double checked to make sure that the cable is not faulty and it's working perfectly.
how did you test that ?
anyhoo, you might want to give this a shot:
+Hi, All,+
+It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
+Restart the device without connecting to your pc and+
+Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
+Best of luck.+
here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
JGG

Treo 700wx "Device Malfunctioned/not recognized by windows" error msg!

Everytime i try to hook up my new treo for syncing via USB it tells me that the device has malfuntioned or that it is not recognized by windows! i have reinstalled active sync multiple times i have changed settings in my treo and checked that all usb options are checked, ive looked for 0kb files and there are none, please someone help... additional info.. i used to have a motorola Q but i deleted that profile from my active sync still nothing, please help!
Post relates to: Treo 700wx (Alltel)

As i said i am new at all of this, when you say "check under device manager and see if the driver has a bang on it it" what do you mean and where can i find this? tried a soft reset still nothing, not ready to do a hard reset because i do not want to lose all of my information i have on the phone currently. Checked that my pc firewall does allow actve sync access
Post relates to: Treo 700wx (Alltel)
Message Edited by Jburm on 07-08-2008 08:12 PM
Message Edited by Jburm on 07-08-2008 08:16 PM

My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

Hey corky60,
I'd go ahead and give the following troubleshooting steps a shot:
1. Try the iPod troubleshooting assistant:
2. Restart the iPod Service
3. Restart the Apple Mobile Device Service
4. Empty your Temp directory and restart
5. Verify that the Apple Mobile Device USB Driver is installed
6. Change your iPod's drive letter
7. Remove and reinstall iTunes
8. Disable conflicting System Services and Startup Items
9. Update, Reconfigure, Disable, or Remove Security Software
10. Deleting damaged or incorrect registry keys
You can read more about each step in detail in this article:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
I'd start at the top and work through the steps until iTunes recognizes your iPod nano.
Take care,
David

X301 (Type 2774) - optical drive not recongized under windows 7

Dear Lenovo Community,
I have a specific problem regarding my optical drive - hope someone can help! I installed windows 7 on my lenovo X301 2774-AH5 - since then the optical drive is not recognized any more by the operation system (everything worked out fine beforehand under XP). In a first attempt I ordered a new drive - but the problem persisted - sent the new drive back and re-inserted the original drive. The device manager lists the drive (Mathsita DVD-RAM UJ-844) and reports the following regarding the device status:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
The following driver is currently installed:
Microsoft, installed: 21/06/2006; driver version: 6.1.7601.17514
I tried to install the latest driver via the lenovo web-page:
http://support.lenovo.com/en_US/downloads/default.page?
However, no drivers seem to be available for the combination: X301 / windows 7 / optical drives.
Any suggestions?
With many thanks and greetings,
Michael
Solved!
Go to Solution.

Hi Michael,
Welcome to Lenovo Community Forums!
I’m sorry to hear that Optical drive of your Lenovo ThinkPad X301 is not recognized in Windows 7.
Is the optical drive powered on?
Ensure that optical drive is enabled in BIOS. Go to control panel -> Device manager and uninstall the driver listed under DVD/CD-ROM drives. Reboot the system, scan for hardware changes and check if the optical drive is working fine.
If the above said didn’t help to resolve your concern, try doing a registry edit. Refer this Microsoft KB article and follow the instructions.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Iphone 6 not recognized in windows

iphone 6 not recognized in windows but it's recognized in Itunes. I uninstalled and reinstall Itunes but it's still not working. I have photos in my iphone. Apple Mobile Device USB Driver is updated. Under Device Manager and Portable Devices, I can't find Apple iPhone. Please advise.

then uninstall bonjour and maybe use regedit to search and delete all registry keys
and you can always connect it to another computer with a non messed up apple software and copy out the photos without having to pair or sync or anything with the computer

5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

Ipod not recognized by windows or itunes

OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Windows will still not recognize it -- most of the time. The toolbar says USB device detected and hardware installed and ready to use, but the message that it's not recognized by Windows still appears. Now I said it was recognized sometimes. When it magically is (this is my only description for it because there is no apparent reason), and this is rare, usually after the computer has been turned off for awhile, the ipod will sync through about a fifth of my library then quit. The "disc cannot be found" message appears, and Windows stops recognizing and I'm back to square one. One would think that I now at least have a fifth of my songs on the ipod. Nope, just one for each time this has happened (being 2). Please do not respond with anything having to do with updating or uninstalling/reinstalling drivers, disabling USB 2.0, searching for E:\ drive, Windows Update, the whole appleipod.bat thing, updating itunes, or scanning for new hardware as I have tried these and a few other solutions. I'm just wondering if I'm completely, well, you know. Thanks for your time.

OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Windows will still not recognize it -- most of the time. The toolbar says USB device detected and hardware installed and ready to use, but the message that it's not recognized by Windows still appears. Now I said it was recognized sometimes. When it magically is (this is my only description for it because there is no apparent reason), and this is rare, usually after the computer has been turned off for awhile, the ipod will sync through about a fifth of my library then quit. The "disc cannot be found" message appears, and Windows stops recognizing and I'm back to square one. One would think that I now at least have a fifth of my songs on the ipod. Nope, just one for each time this has happened (being 2). Please do not respond with anything having to do with updating or uninstalling/reinstalling drivers, disabling USB 2.0, searching for E:\ drive, Windows Update, the whole appleipod.bat thing, updating itunes, or scanning for new hardware as I have tried these and a few other solutions. I'm just wondering if I'm completely, well, you know. Thanks for your time.

I need help, my ipod touch is not recognized by windows as a harddisk

i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0Om

B0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

My 4 generation I touch is not recognized by windows 7 on any computer

My itouch is not recognized by windows 7 on any computer. Please help me. Thank you Gail

Hi Gail,
Have a look here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes

PCMCIA-FBus Series 2 is not recognized under Windows XP

Similar Messages

Maybe you are looking for