PCMCIA-GPIB for win 2000 running on cPCI bus via a cPCI PC Card Adapter

We are trying to use a PCMCIA-GPIB for win 2000 running on cPCI bus via a cPCI PC Card Adapter. Our OS is WIN2K SP3 and we are running version 1.7 (latest) of the drivers. Unfortunately when using the "getting started" wizard and the "verify software and hardware installation" the system occasionally doesn't pass the third test. When it does, we try to scan for instruments using MAX Explorer to talk to a Agilent CW generator via GPIB but it cannot find the instrument. Doing the same thing on a laptop PC is successfully achieved. Any information on this matter would be greatly appreciated.

Hi,
Although it should be transparent to the PCMCIA card, I have also have had some problems with some adapters. Specifically, I have been able to install the card in a PCI-PCMCIA adapter form Qualtech, but not if I'm using a cPCI Cirrus Logig adapter. We haven't been able to find a cause for this.
If you need a GPIB interface in a cPCI system, you might consider the PXI-GPIB. PXI fully compliant with the cPCI standard.
DiegoF.

Similar Messages

  • Help find the Driver CREATIVE LABS CT4810 chipset ES1373 for Win 2000. E-mail dirpt@mail.

    Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].

    AlexVP wrote:
    Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].
    You can start from here.
    jutapa

  • Installing a PCMCIA-GPIB with WIN-XP and I get an "Unknown Hardware Error"

    no resource conflicts. Config settings for GPIB0 are slot#ffffffff 500 nsec bus timing. Card worked with win-me, and ver 1.2 of install s/w - help!

    Hi Dave,
    You should try using the lastest driver for the PCMCIA-GPIB interfaces. This is NI-488.2 2.1. You can find it in the Driver and Updates page.
    DiegoF
    National Instruments.

  • Language issues in SQL*Plus 8.1.7 for win 2000

    Hi,
    I installed Oracle Client 8.1.7 /Win 2000 release.
    When I use SQL*Plus 8.1.7, I can not type nor read Arabic characters. My Win 2000 has all the Arabic components. And I am using AR8ISO8859P6 character set on both DB and Registry edit.
    I feel like it is a bug in SQL*Plus 8.1.7 on win 2000.
    Did anyone face such problem?? Do anyone have a solution?
    (Note: When I type Arabic characters it is displayed as Latin characters. When I store them in DB and retrieve them from an other application they are retrieved correclty)
    null

    Hi
    I had similar problem with Cyrillic characters on previous version of Oracle on Windows NT 4.0. We could not find good solution for them. Only solution we found was to write sql commands in notepad and send it in SQL*Plus with copy and paste.
    Regards
    null

  • Itunes for win 2000

    Download for windows 2000 is version 7.3.2. Itunes gives message the 7.4 is required for Ipod

    The Ipod is the classic 80 gig. Purchased 6/6/08.

  • What is the latest version of Flash Player plugin for Win XP running IE8?

    What is the latest version of Adobe Flash Player plugin? I am running Window XP Pro with IE 8. I don't have any other browsers installed. I currently have Flash Player Active X version 11.8.800.175 and Flash Player plugin version 11.8.800.168. Isn't there a plugin of a higher version?

    11.8.800.168 is the latest plugin version.  But since you do not use any other browser, you do not really need the plugin, except for rich media content in Adobe Reader.

  • J2sdk1.2.1 for win 2000 Setting path

    Hi all,
    Can Any one help me to set all path for running J2ee on my system i have just installed j2sdkee1.2.1 on my system.
    Thanks in advance
    Regards
    Vijay

    What exactly is your issue? Are you having trouble compiling applications or deploying and running them? Are you using J2EE 1.2 or was that a slip of the finger? Do you have some requirment that is forcing you to use 1.2, if not, why not use 1.4 instead?

  • 4i for win 2000

    Is the patch available? where can I get it(I don't seem to be able to find it) ?
    If it's not available, when will it be? NT will have discontinued support, did Oracle know that(Of course they did ;)?
    This is kind of urgent, thank you.
    null

    We had the same problem. There is a patch available on oracle metalink that will upgrade disco admin edition (to version 4.1.36), which will then update your EUL.
    Here is how you get it:
    -go to: "metalink.oracle.com"
    -click: "patches"
    -click: "Click here for Patches released..."
    -select product: "Discoverer admin..."
    -select platform: "MS Windows NT/2000..."
    and there it is...
    here is the patch info:
    ID:657540 Patchset::1750539
    Discoverer 4.1 Admin and Desktop Edition Patch version 4.1.36 for MS Windows NT
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joao Viegas ([email protected]):
    Is the patch available? where can I get it(I don't seem to be able to find it) ?
    If it's not available, when will it be? NT will have discontinued support, did Oracle know that(Of course they did ;)?
    This is kind of urgent, thank you.
    <HR></BLOCKQUOTE>
    null

  • Downloading Oracle for Win 2000

    I have had difficulting downloading oracle. personal edition.
    My computer is 450Mz, 128mb ram, free 2.3gig space.
    What is the problem/ Help

    Hi Ewuuk Lomo-david,
    your computer specification you wrote is ok. But you did not specified any problem.
    1 If you are feeling problem in Downloading/disconnection then you should use a software called "GetRight". You can download this software from www.download.com.
    2. if you are feeling downloading data rate problem then you can use any "internet Accelerator" software which you can download from the same site as i mentioned earlier.
    Personal Oracle 8i requires almost 540mb of disk space and you have enough space in you HD.
    regards
    naseer

  • Looking for how to run both a Quadro 4000 and a geforce card win7 please

    hello,
    way back when i built the window 7 editing rig i tried to get a quadro 4000 and a geforce 9800 GT (older version) to work together to get 4 displays going
    but i had stability issues so i got another quadro and never had a problem
    however, reading this recent thread
    http://forums.adobe.com/thread/1258243?tstart=0
    it sounds like users are able to mix quadro 4000 with geforce cards
    using the geforce for the cuda processing and the quadro for the output
    i still want to run 4 monitors (2 from the quadro 4000 and then 2 from the geforce card (open to suggestions here)
    if i can mix cards now i'd like to get a geforce gpu to help out with 4k editing of a feature (probably red scarlet)
    and use the quadro for 10bit output
    as always positive feedback is appreciated, cheers, j

    hello,
    no i am still sticking with cs6 for now
    and i found where i had read the instructions before
    (an answer to one of my own previously asked questions):
    Install Quadro Driver full installation via Wizard.
    Decompress Geforce Driver latest version but do not run Wizard install.
    Manually update Geforce Card driver via Device manager by pointing to Nvidia/Geforce folder
    Launch Nvidia Control Panel and set the GPU Acceleration to Geforce card only.
    Eric
    ADK
    i guess this wraps this one up
    thanks for taking the time to read
    sorry for wasting your time
    cheers, j

  • Oracle 9.2.0.3 or 9.2.0.4 on Win 2000

    In the OTN downloads page, I see that I can download the database for version 9.2.0.1 (Standard Edition), for Win 2000.
    I have been informed that the Developer Suite for 9i, with the 9.2.0.6.0 patch, is certified to run with database 9.2.0.3 or 9.2.0.4.
    My question: Is database 9.2.0.3 (or 9.2.0.4) also available as an OTN download? If so, how can I access it?
    Alternately: Does anyone have reliable information as to whether Developer Suite 9i (with patch 9.2.0.6.0) can also run against database 9.2.0.1? (All on Win 2000).
    I am stressing the patch 9.2.0.6.0 issue, as I am told that prior to this patch, there were problems with setting up the Repository (needed for working with Designer).
    Thanks in advance for any information on this.
    Eliram Braudo

    Nope. There is no Database 9.2.0.3 for Win 32-bit (cd-pack/full release).
    There is Database 9.2.0.1 (full release) and Patch Sets that brings it up to 9.2.0.3 (or .4 or .2). Patch Sets are, as I know, only available from Metalink with a valid support contract.
    Note that AS and DS are 9.*0*.2. (confusing, yeah!)
    Here on OTN we can find:
    Oracle9i Designer Release 9.0.2.6.0 - a full, patch release for Oracle9i Designer
    (You must install this over your Oracle9i DS installation)
    Note the difference - patchset is for Designer/Repository 9i as part of DS, not the whole DS product stack (latest patchset for Forms & Reports is 9.0.2.3 I think). Patching Oracle (except for DB) is messy as always I guess ;)
    I would guess that Oracle Support recommends to have DS patchset 9.0.2.2 installed also...
    And cert info includes a requirement for at least 9.2.0.3 (DB) so I guess you have smoe patching to look forward to ;-D
    Hth
    Fredrik

  • Forms 6i webforms under Win 2000

    I was trying to use Forms 6i under win 2000 and I get a message on the install indicating webforms only runs on NT. I understand the problem, but how long will it be before you have a version for win 2000?
    Or is their additional docs that would help with this install?
    Thanks
    Mark

    Frank:
    On the install I have a box come up that says
    "You have selected Developer 2000 Webforms which is installble only on Windows NT 4.0 only. Press OK to continue to install other modules or press cancel to terminate".
    Other modules install. Just the webforms does not.
    This was our first install on Win 2000. We had planned 2000 as the operating system for 9iAS also. Are we better off just going back to NT 4.0 for now? Is 9iAS win 2000 ready?
    Thanks
    Mark
    null

  • K7pro (6195) & win 2000

    I try to install win2000 on a k7pro it works, but the SO instal several generic controlers and there are a unknow device in the control panel.
    The Setup from the drivers-cd didnt install any driver. The only driver for win2000  that i can found on the cd is the Power Management Setup. No AGP driver for win 2000 and the IDE driver didnt work.
    I try Live update 3 but says that no driver update were found (The same for the bios and in not with the lastest version). PC alert 3 (work fine on win98) says that that i need a monitoring chipset or something like that.
    In the MSI web, here,
    http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=1&CHIP=1&Page=2&num=0
    there are a  AMD 751 Chipset AGP Driver but the one for win 2000 is the same for win98 and dont work.
    Any one can help me?
    PS: sorry for my bad english.

    Ups, sorry, its a typo mistake. I meant OS (operating system).
    The questions is that i need the drivers for win2000 of my mobo because the drivers of the CD are only for win98 and the win2000 drivers of the suppor section are for win98 (the URL is the same for boot OS drivers).
    Without that drivers the system runs, but with generic drivers and not all the devices of the mobo are recognized by win2000.
    Hope, now u understand me. Thanks for read.

  • Ipod nano possible with win 2000???

    my wife just got an ipod nano \(3rr gen) for her bday, and we have a computer with win 2000. now the only itunes we can find for win 2000 is ver. 7.3. when i downloaded this it tells me that i need ver. 7.4 or better. anyone got any info or tips for me... PLEASE

    NO. That is NOT what the website says. When you go to the 732 for Windows 2000 d/l page, it clearly states you can use Win2k. The website says "iTunes is the best way to enjoy your digital music and video with your PC, iPod and Apple TV. iTunes 7.3.2 for Windows 2000 is designed to work with Windows 2000 Service Pack 4 or later. To use iTunes with Windows XP or Windows Vista, visit http://www.apple.com/itunes/download/ to download the latest version. Use iTunes to import CDs or download songs and videos from the iTunes Store. Make playlists perfect for any occasion. Burn playlists to CDs and play them on your home stereo. Sync your media with iPod to enjoy it on the go, or play your collection on your TV with Apple TV."
    Why have so many missed this??? Apple is clearly stating they support Win2k - including sync to ipod. I so got one. I d/l the iTunes 732 for Win2k and it works fine - to play music (using it right now). But once I connect my new nano, I get the error message "The iPod 'IPOD' cannot be used because it requires iTunes version 7.4 or later. Go to www.blah blah to d/l v7.4..." So.... what now??? I'm stumped. And never-mind the "win2k is old and nobody supports it..." stuff... Microsoft still offers SP4 for d/l.
    Why would Apple put a utility in a backward compat. program that is not backward compatible?????
    In addition (and this may be over my head), but why does the website show the file @ 47.7MB, put once on my hd it shows 37.9MB?? I've d/l the file twice to be sure but have the same result.
    Please forgive me - I am not shooting the messenger, I'm terribly confused. I am clearly missing something. Would someone PLEASE set me straight??? I'm a big boy - I can take it.

  • Crash when genarating forms on Win 2000

    When we generate some complex moduls with forms
    generator on Win 2000, the generator posts the messages
    of internal error which occurs in some function inside generator.
    Sometimes the designer is also close by OS because of
    illegal operation.
    On Win NT 4.0 the generation produce nice form.
    We use Designer 6i rel. 2. Is there maybe some patch on rel 2 for Win 2000 ?
    We can't migrate to release 4 now.
    Saso Celarc

    Hi,
    Can you please give some more details as to what all things you have in a module which is giving error??
    Thanks
    Vishal

Maybe you are looking for

  • Tehnical wage type not coming in RT table

    Wage type for Employer Pension Contribution, EDLI Contribution, EDLI  Admin Charges & PF Admin Charges not coming in RT table. Please suggest some solution, Its urgent. Regards Abhimanyu

  • P1102w no longer working on wireless, lights don't blink

    I just moved and have not been able to get the wireless working on my printer. We have an apple time capsule (airport) router that moved with us, so it should be the same wireless network we connect through. Tried reinstalling, but when I go through

  • Deleting Non-Contact email addresses

    How can I delete an email address that is not in my contacts. I entered an email address incorrectly and now every time I try entering a similar email address, the bad one shows up.

  • My Curve 8520 wont retreive picture messages, help?

    I have had my curve 8520 for about three weeks and whenever i get a picture message i try to retrieve it and i dont get it. it says receiving message for a while but then it just goes away, other times it will wont receive the message for a long time

  • How to save a value (not in file) in Labview?

    Hello, I seems to be an easy question, but i don't know how to do it. I want to save the first value from my acquisition board (BUT NOT IN A FILE), in Labview "memory" and keep it for a later use. Like a variable stored in programming. With shift reg