PCMCIA on Compaq Armada M700

Hi
I have installed Solaris 8 x86 on my Compaq Armada M700 laptop. Everything works fine including video which I installed XFree86 for, except that Solaris does not see my PCMCIA controller.
Does anyone have any sugegstions ?
Best Regards / Gareth

Does PCMCIA come with a Solaris driver ? I believe it needs a driver
which can recognize the pcmcia card when inserted or to talk to it.
You can look through these sites to find the hardware compatibility
list for your pcmcia card, and there are other driver related
information on these sites, which may help.
http://soldc.sun.com/support/drivers/hcl/index.html http://soldc.sun.com/developer/support/driver/
http://www.sun.com/software/intel/resources.html http://www.sun.com/software/solaris/ds/ds-intel/ http://www.sun.com/software/intel/
Thx
Tushar Patel.

Similar Messages

Need detailed manual showing how to install a pentium III motherboard on compaq armada m700

I tried ti install a pentium III on my pentiumII compaq armada m700 It fails to power up. . I need detailed and complet directions with picturesshowing how to do this..additionally getting the screws out and in was near impossibe. Any suggestion there? .I am disabled and have very poor finger and hand dexterity. Thanks for any help. I cannot thow this computer away. Money? I have none.

http://h10032.www1.hp.com/ctg/Manual/c01120667.pdf This is the manual
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&tool=&query=compaq%20armada%20m...
I got it from here.

Compaq Armada M700 & ATI Rage Mobility

Hi. It would be greatly appreciated if anyone could help. I installed Solaris 8 on my Compaq Armada M700 notebook and have had endless trouble getting the display drivers to work.
Does anyone know of any available driver for the ATI RAGE Mobility-P AGP ? I have had to resort to using RedHat Linux which does have drivers for the time being ...

You can go to www.xig.com ,as far as i knew , solaris doesn't support
ATI Rage Mobility-P , I have a same problem like yours , but I am using ATI Rage 128 Mobility (M3) , for more information you can go to
http://soldc.sun.com/support/drivers/hcl/index.html .

Compaq armada m700 forgot power on password

hello,i forgot my power on password(the key we need to enter on power on green box)for my compaq armada m700.Actually i opened it after a long time(2-2 1/2yrs).I enter the correct password but it is not accepting it.please help.
thanks in advance

You might try the business support forums found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Installing S10 on Armade M700

I am attempting to install Solaris 10 on an old Compaq Armada M700, prior to trying for 'real' on an IBM I am hunting for on eBay.
It only has 192M of RAM, but running the graphical installer is okay. However, I soon get the following msg:
/sbin/install-setup: fork failed - too many processes
Requesting System Maintanance Mode
(see /lib/svc/share/README for more information.)
Console login service(s) cannot run
Directly executing sulogin
then a # prompt...
Just wondering if this is a result of the small amount of RAM, or some other problem.
Thanks,

Hello pargoo,
I have also an old M700 with 192MB memory and an 700MHz processor. My problem is, that the notebook boots from the self-made CDs, but it stops when Solaris search the configuration. Maybe you have an hint for me?
Best regards
Africanjoe

DOS PCMCIA support for old Compaq Armada 1571DM

Hi there,
I have recently purchased an old Compaq Armada 1571DM for a project I'm currently in, which requires both portability and the availability of a couple of COM (serial) ports. The laptop comes with a single serial port, so I thought to add the second one I need via a PCMCIA to serial card adapter. So I purchased one of these too.
The problem I faced is that the software I use to access the serial ports runs on DOS only, and as far as I could find on the internet, there seems to be no DOS driver/card enabler for this particular laptop.
I'll very much preciate your help, as I'm stuck on this issue for a long time now, and I really need to make it work.
Thank you very much.
Best regards.
PS.: under Windows 98 everything seems to work: PCMCIA sockets are detected, and PCMCIA adapter is properly recognized and installed thru its provided drivers.

Hi:
You may also want to post your question on the HP Business Support Forum -- Armada notebook section.
There is a member there (Rainald Taesler) that knows everything about those relics. If he can't help you no one can.
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274

Compaq Armada

I have just installed (don't laugh) Windows 7 Starter Edition on my Compaq Armada 110 notebook and have found a Vista/Win7 driver that works for my Sweex PCMCIA card. Unfortunately I have not been so lucky with my sound. I have not, as yet, found a sound driver that works ( I tried the Realtek Vista HD audio driver without success). Apart from that, all seems to be OK and the install went without incident.
Does anybody know what works and where I can download it?
This question was solved.
View Solution.

Windows automatic updates today issued an update to the AC97 audio driver. Voila, problem resolved instantly after two days of unproductive web searching!
Shaun

Solaris 8 on Compaq Armada E500

Anyone install solaris 8 on Compaq Armada E500, I am having problems with the graphics card, ATI RAGE Mobility-P AGP card.
Is any of the other cards compatible with this system.

The first thing to do with a Compaq is make sure the latest and greatest rompaq has been applied to the board and all devices. Next, download and use the latest and greatest Solaris DCA diskette and use it for the install boot. I am making the assumption you are using the CD this time around. If that doesnt work, you will have to remove all but the bare minimun of hardware and try the install then add each device one by one. The DCA diskettes are updated regularly so thelatest one may solve the issue.
Lee

OS X 10.2.8 on a Compaq Armada

Hi,
I've got an old Compaq Armada 1560 and i wondered if i could install OS X 10.2.8 on it?
If yes, how can i do this, do i need a special app to do this,
Thx

Hi der reiter,
no, you cannot install MacOS X on any other computer but an Apple computer.
However, it DOES work the other way round: If you buy a new Apple computer with Intel processors you are able to install Windows or Vista on a separate partition and switch between the systems at startup. Benchmarks prove that XP runs an new Apple computers natively even a little faster than on other comparable x86 machines.
If this answered your question please consider granting some stars: Why reward points?

Configuring Xorg on Compaq Armada E500

I have a Compaq Armada E500 laptop that I'm installing Arch on. I have the base Arch install done, and I'm now trying to get Xorg to work properly. The problem I'm having is that none of the automatic configuration tools mentioned in the wiki (Xorg -configure, xorgconfg, hwd, xorgconfig) work properly, and neither does just running without a /etc/X11/xorg.conf file. It tries to use the vesa driver, which only gives me a 800*600 resolution, even though the screen is 1400*1050. I have tried installing the both the xf86-video-ati and the xf86-video-r128 drivers and activating them by setting the driver in Xorg.conf, but that doesn't work. Catalyst (the proprietary driver) also does not work. Here is my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
BoardName "Rage Mobility P/M AGP 2x"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I also cat'd all 4 Xorg error logs and pasted them on pastebin: http://pastebin.com/f7991f0c8
I'll post more specific details on which errors the various drivers throw later; I'm on the Armada now so I can't quit Xorg to try the drivers.

Sorry, I got it working like 5 minutes after I made this post. For future reference, I had to install the xf86-video-mach64 package in order to use the driver "ati".

Where can i find a charge cord for an old compaq armada 1571dm?

I have an old Compaq Armada 1571DM that used to belong to a relative. It did not have a charge cord with it when I got it. I am trying to find out where I might find one.
This question was solved.
View Solution.

Hi,
Are you looking for this ?
http://www.apexbattery.com/compaq-armada-1571dm-laptop-ac-cord-ac-cord3.html
http://www.voltdepot.com/power_supplies/laptop/Compaq_Armada/1571DM.php
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can the compaq armada m300 support a 40gb hdd from a presario2000us with or without an os ???

just would like to know if the compaq armada notebook/laptop can support a 40Gb hdd internal from the presario 2100us laptop/notebook with or without an OS already on the hdd???

Hi:
When I compare the specs between the two machines, even though the m300 states max drive is 12 GB, I see no reason why it won't take a 40 GB drive.
I have an old Dell C610 that came with a 10 GB 4200 RPM HDD and when the drive died, I bought a 60 GB 5400 RPM HDD, and it has performed flawlessly ever since.
Paul

Live! Cam Voice + Windows 2000 - No video input

Hi all,
Since purchasing my Live! Cam Voice, I've always used it with a Windows XP Home machine. Recently, though, I tried to use it with a laptop running Windows 2000 Professional. The installation process encounters no problems and applications like MSN Messenger detect the cam without any difficulty. However, when *any* application attempts to view video from the camera, nothing is returned but darkness (I have lights on :-P) - it's as though it's simply not been switched on. Anyone got any ideas for dealing with this?
Mike
If anyone's interested, the laptop's spec is . . .
Model - Compaq Armada M700 (USB2 connectivity provided via PCMCIA card)
CPU - Intel P3 650Mhz
Memory - 92MB
HD - 6GB
Not sure about anymore details of the spec (graphics accelerator, etc) - I guess Googling for the model would give more details.

I am having the same problem. I am using windows Vista and have tried?recording sound in other applications and it works fine, just not when trying to record in LIVE! cam. I jbought this cam 2 months ago and just now find out it does not work when I need it the most. I am due to give a video presentation in two weeks and will probably have to buy a new cam, what a dissapointment!

Cannot Install OS 8.1 on new hard drive, 233 G3 Powerbook

Ok, so here's the deal.
I have an old Powerbook G3 Wallstreet. 233 Mhz 13" screen.
I recently ran into a problem where I booted up, and the hard drive (original 2GB) was erased. Completely reinstalled, and as soon as it rebooted after the install, the hard drive was empty again. Weird.
So, I decide to reinstall OS8 on a new hard drive. I have an older 20 GB drive from a compaq Armada M700, which I had replaced with a newer 120 GB drive, so I used that in the Powerbook.
Anyway, I've tried lots of things. Fully empty nonpartitioned drive, single 8GB partition by using MacDisk in windows, multiple 8GB partions, what have you. Disk Setup does not see any hard drive I place in the powerbook. I tried both the 120 and the 20 GB.
Any suggestions? I only have a Windows machine to work with, as the G3 is my only Mac. (Well, I have a graphite iMac, but it's suffering from the screen shrinking/power down problem common to those units, so I can't really do anything with it.)

ShatteredOne,
When you have installed the OS and restarted, did you get the blinking '?' alternating with a folder? If so, try resetting the PRAM to possibly correct this issue.
http://docs.info.apple.com/article.html?artnum=2238
Will the Wallstreet boot to the MacOS 8.1 CD? If so, try Drive Setup on the 8.1 CD again after resetting the PRAM.
The original Wallstreet shipped with a special OS 8.1 CD (green label) since the retail MacOS 8.1 CD will not have the necessary Powerbook G3 enabler file.
You do not have to partition the HD, but just make sure you are have formatted as HFS Extended although HFS Standard will work. However, on a large drive like the 120GB, you will have a lot of wasted space due to the block size.
If still having problems, install the original 2GB HD > boot to the 8.1 CD > open the utilities folder on the CD > Drive Setup and select 'zero all data' when you initialize; now run the Test Disk test and see if it passes. If it fails, zero/test one more time.

Installing Oracle 9i (version 9.0.1) on RedHat Linux 7.2

Hi All,
I've been trying to install Oracle 9i version 9.0.1 on RedHat
Linux 7.2 with kernel 2.4.7-10. This RH 7.2 is running on my
Compaq Armada M700 laptop that has 800MHz CPU and 256MB of RAM.
I have 10GB of diskspace on this laptop.
Someone in this group posted a howto on how to install Oracle 9i
on RedHat Linux 7.2 but for some reasons, Oracle Universal Installer
still hangs at 74% of the installation. Here is what I did:
1) Install RH 7.2 on the laptop. I also make sure that make, ar,
ld, nm and C for unix got installed when I installed RH 7.2.
I also verify by using the command "which make", "which ar",
"which ld" and "which nm" and they are also in the /usr/bin
directory. I also make the /tmp partition to be 800MB and
the swap file to be 500MB,
2) Modify the /etc/hosts file. This part is easy. I can ping
both the hostname, FQDN and the IP address of the laptop from
both locally and remotely (tested with SSH connection),
3) Go to blackdown.org and download jdk118_v3
4) Uncompress and put it in the /usr/local/jdk118_v3 directory,
5) Make a softlink ln -s /usr/local/jdk118_v3 /usr/local/java
6) Download and install package:
rpm -Uvh force nodeps binutils-2.10.0.18-1.i386.rpm
7) In /proc/sys/kernel/sem file, I modify the third column from 32 to 128,
8) Download and install package:
rpm -Uvh force nodeps binutils-2.11.90.0.8-9.i386.rpm
9) Download Linux9i_Disk1.cpio, Linux9i_Disk2.cpio and Linux9i_Disk1.cpio
to my laptop hard-drive,
10)Run cpio -idmv < Linux9i_Disk1.cpio (for 2 and 3 well),
11)Create a user account "oracle". This "oracle" account belongs to
group "oracle". Furthermore, I also create a directory /oracle
and change the owner and group permission to account "oracle"
12)Start the installer ( as Oracle User ) by typing ./runinstaller
13)The installer will ask you to run a started script as root ,
you may open a shell and type su then open Nautilus (
if using Gnome or File manager as super user if using KDE )
and drag the noted file to the shell screen and press enter,
after it is ended continue with the installer (done),
14)It asked to supply JDK home directory then it is /usr/local/java (done)
15)Unix group Name ( to update Oracle software ) : (I leave blank here)
16)Oracle home is : /oracle/9.0.1
/oracle/orainventory
From what the poster said, it should work; however, it did NOT work
for me. I've tried and tried but no avail. I have plenty of disk
space so I don't think space is an issue here.
Please help.
David Tran

Hi All,
I've been trying to install Oracle 9i version 9.0.1 on RedHat
Linux 7.2 with kernel 2.4.7-10. This RH 7.2 is running on my
Compaq Armada M700 laptop that has 800MHz CPU and 256MB of RAM.
I have 10GB of diskspace on this laptop.
Someone in this group posted a howto on how to install Oracle 9i
on RedHat Linux 7.2 but for some reasons, Oracle Universal Installer
still hangs at 74% of the installation. Here is what I did:
1) Install RH 7.2 on the laptop. I also make sure that make, ar,
ld, nm and C for unix got installed when I installed RH 7.2.
I also verify by using the command "which make", "which ar",
"which ld" and "which nm" and they are also in the /usr/bin
directory. I also make the /tmp partition to be 800MB and
the swap file to be 500MB,
2) Modify the /etc/hosts file. This part is easy. I can ping
both the hostname, FQDN and the IP address of the laptop from
both locally and remotely (tested with SSH connection),
3) Go to blackdown.org and download jdk118_v3
4) Uncompress and put it in the /usr/local/jdk118_v3 directory,
5) Make a softlink ln -s /usr/local/jdk118_v3 /usr/local/java
6) Download and install package:
rpm -Uvh force nodeps binutils-2.10.0.18-1.i386.rpm
7) In /proc/sys/kernel/sem file, I modify the third column from 32 to 128,
8) Download and install package:
rpm -Uvh force nodeps binutils-2.11.90.0.8-9.i386.rpm
9) Download Linux9i_Disk1.cpio, Linux9i_Disk2.cpio and Linux9i_Disk1.cpio
to my laptop hard-drive,
10)Run cpio -idmv < Linux9i_Disk1.cpio (for 2 and 3 well),
11)Create a user account "oracle". This "oracle" account belongs to
group "oracle". Furthermore, I also create a directory /oracle
and change the owner and group permission to account "oracle"
12)Start the installer ( as Oracle User ) by typing ./runinstaller
13)The installer will ask you to run a started script as root ,
you may open a shell and type su then open Nautilus (
if using Gnome or File manager as super user if using KDE )
and drag the noted file to the shell screen and press enter,
after it is ended continue with the installer (done),
14)It asked to supply JDK home directory then it is /usr/local/java (done)
15)Unix group Name ( to update Oracle software ) : (I leave blank here)
16)Oracle home is : /oracle/9.0.1
/oracle/orainventory
From what the poster said, it should work; however, it did NOT work
for me. I've tried and tried but no avail. I have plenty of disk
space so I don't think space is an issue here.
Please help.
David Tran

PCMCIA on Compaq Armada M700

Similar Messages

Maybe you are looking for