PCMCIA Sound Blaster Audigy 2 ZS, connection to Mixer in and out

I have a PCMCIA Sound Blaster? Audigy? 2 ZS card attached to a laptop. I want to connect this laptop to a Denon X300 Mixer (http://www.platinum-records.com/Deno...0-prod7243.htm) so that I can untilize music on the laptop dri've, into the mixer board. Then I would like to stream this music back into the Computer for recording/manipulating on the laptop.
I think I have the link to the mixer figured out (use provided cable and a mini plug to RCA patch to the line in on the X300 Mixer) but the link back to the computer I am having issues with. Any Suggestions appreciated!
Spindu

dilip wrote:
Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
Hi
Colours may vary --> just connect by the instructions from both manuals.
There are good explanations for
- Stereo and 4-Pole Jack Diagrams
- Connecting a multichannel home theater receiver
- cabletypes needed on connections
on User's Guide.
NOTE: This User's Guide can be found on your driver CD too.
Also, here is the Onkyo HT-S580 manual.
jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM

Similar Messages

Connecting PCMCIA Sound Blaster Audigy 2 ZS Notebook to Onkyo HT-S580 Recei

Hi
I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop.
I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks.
The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White
The color on the Creative Card end are Center- Orange , rear - Black , Front - Green
There is color difference between these two ends . Is it advisable to connect these two jacks ?
Please recommend the suitable cable type and name for this connection
Thanks

dilip wrote:
Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
Hi
Colours may vary --> just connect by the instructions from both manuals.
There are good explanations for
- Stereo and 4-Pole Jack Diagrams
- Connecting a multichannel home theater receiver
- cabletypes needed on connections
on User's Guide.
NOTE: This User's Guide can be found on your driver CD too.
Also, here is the Onkyo HT-S580 manual.
jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM

PCMCIA Sound Blaster Audigy 2 ZS Notebook vs USB Sound Blaster Audigy 2 NX

Hey all I'm new to this so can anyone tell me which one of these are better taking for granted I have the Logitech z5500's and I want to use the optical cable fuctionality if possible. I am just wondering about this b/c I noticed I cant buy the NX anywhere is this b/c itz very new or too old? I also noticed that the ZS doenst have an optical cord capability but it will connect to my laptop (as does the other one by USB capability). Any help/info on where to purchase the NX or any info on it all as well as the ZS although I already know where to buy that, would be greatly appreciated.
Thanks,
Brandon C.

It's OK now. Problem was in Adobe Audition. I didn't choose proper recording device.

Sound Blaster Audigy 2 ZS, only front left and front ri

I've had the sound card for about 8 months now. About a week ago, instead the usual 7. coming out of my speakers, only the front left and front right speakers work. It's not the speakers, because I plugged the speakers into the onboard audio and they all work, but when I have them plugged into the sound card, only the front two. I have the audio set to 7. in the control panel and have CMSS 3D turned on. It has nothing to do with settings, because when I run the test in the THX console, the front two speakers are the only ones that work. Could someone please help me out, Thanks

You could try this. Remove the sound card from the computer and boot up the computer without the sound card in the computer. Let Windows finish loading and then have it shutdown. Slot back the sound card to the PCI slot and boot the computer.
Jason

Sound Blaster - Audigy LS (Yes Yes Go Ahead and Lau

Anyway.
I need desperately to find out from somewhere, where can I buy a "SPDIF I/O -plug", as it says in the
manual that will be combined to Optical Digital I/O card (available only on certain models).
Well my card has the socket in the audio card, and please someone tell me where to buy such a
cable I assume which then will be installed into the rear of the chassis as all the other cards etc..
I would appreciate very much if someone could shed some light for me on this matter, and I li've
in Finland so that might complicate things a bit but anyway thanx already.
soundZspy of coN:Fusion (2006)

Download the latest Creative MediaSource v3.30.2 from your product download site.

Other than downloading the latest Creative MediaSource v3.30.2, don't forget to also download the following latest plugins for Creative MediaSource:
- Creative MediaSource Plugin for MiniDisc .00.58
- Creative MediaSource Plugin for CD Burner 3.0.8

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Sound Blaster Audigy 2 ZS Platinum Pro Prob

Recently I've purchased the Creative Power Pack Pro 7., it included the Creative GigaWorks 7. S750
speakers, and Sound Blaster Audigy 2 ZS Platinum Pro soundcard. I've installed my Sound Blaster Audigy 2 ZS Platinum Pro card and setup my Sound Blaster GigaWorks S750 speakers but so far after many attempts haven't gotten them to work. I've tried all updates off the Creative site and gone through the cards settings. For some reason in the speaker settings it only lists Headphones, 2., 4. and 5. speaker settings, leaving out 7.. I've checked all plugins and hookups, and am stuck for now. I have a brand new Sony Vaio computer, so i know that my computer is not the problem. I read through all the forms and I was only able to find one other question like mine, one person answered saying that the Sound Blaster Audigy 2 ZS Platinum Pro is not compatible with 7. speakers. I have no clue why Creative would sell the Audigy 2 ZS Platinum Pro and GigaWorks S750 7. speakers if they are not compatible with each other. Someone please help me. Thanks.

Hi Joko,
Please check your private message.

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

"Sound Blaster Audigy Fx" and stereo mix availability

If I buy/install the "Sound Blaster Audigy Fx" will it add the stereo mix option to my sound properties, also
does this card work on windows 8?
http://www.bestbuy.com/site/creative...&skuId=3287009

Re: Sound Blaster Xtreme Audio missing Stereo MixK I think I'm having a similar problem with my Windows 7 Professional system.
I'm am getting sound out of my card.
When I right click on the "speaker" icon in the task bar I see the following list of 5 options
Volume Mixer
Playback Devices
Recording Devices
Sounds
Volume Control Options
However when I click on "playback devices", "Recording Devices" and "sounds" nothing comes up.
What I did do is completely uninstall all traces of any installed Creative software and in the device manager did an uninstall for the SB Xtreme Audio Card.
My recording device is the integrated microphone in the Logitech Quickcam/IM that I have installed. If I go to accessories and click on "sound recorder" it doesn't start up either.
The other issue that I see is that when I go into Control Panel and click on Sounds, nothing happens.
Something is definitely going on but I can't seem to track down the cause.

I have some Audigy card Sound Blaster Audigy SB1394 EAX ADVANCED HD maybe can

I have some Audigy card Sound Blaster Audigy SB394 EAX ADVANCED HD maybe can i get some info about this card.. it is 5./6. some details about it. i found it in my closed :P
it will be great if someone help me about this card. because i have my SB li've Value if this audigy better i'l just change it.

i think it is an Creative Labs SoundBlaster Audigy with 394 PCI Sound Card
32-Bit Professional Quality Effects Engine
? Creative's Audigy? patented effects processor
? Support for real-time digital effects like reverb, chorus, normalizer, pitch shifter, or distortion across any audio source
? Capable of processing, mixing and positioning audio streams using up to 3 available hardware channels
? Full 32-bit digital mixer maintains all sound mixing in the digital domain, eliminating noise from the signal
High Definition Audio Quality
? Playback of 64 audio channels, each with its own independent sample rate
? 24-bit Analog-to-Digital and Digital-to-Analog conversion
? 6-bit recording with sampling rates of 8, .025, 6, 22.05, 24, 32, 44. and 48kHz
? Supports Sony/Philips Digital Interface (SPDIF) input and output of up to 24-bit/96kHz quality
? SPDIF output up to 24-bit resolution at selectable sampling rate of 44., 48 or 96kHz
? Low latency multi-track recording with ASIO? support
EAX?ADVANCED HD?, Advanced Audio and 3D Audio Technology
? Optimized user-selectable settings for headphones, two, four or six speakers and external A/V amplifiers
? Dolby? Digital audio decoding to 5. speaker channels in both analog and digital modes
? Upgradeable 3D audio architecture for future improvements
? Hardware acceleration of EAX ADVANCED HD for games
? Creative Multi Speaker Surround? (CMSS) technology places any mono or stereo source in a 360? audio space
? User-selectable EAX ADVANCED HD music presets, pre-configurable DSP modes simulating various acoustic environments
? Time-scaling
? Audio Clean-Up
SB394 Connectivity
? High speed connection to IEEE? 394-enabled devices with up to 400Mbps transfer rate
? Interconnection of up to 63 devices for peer-to-peer communication
? SB394 Certification Program thoroughly tests and certifies participating vendors' 394-enabled devices with Sound Blaster Audigy for optimal performance and ease of use
? Hot-plug support for ease of connecting or disconnecting external devices
Realistic Wave-Table Synthesis
? Creative's Audigy music synthesis engine
? 64-voice hardware polyphony with Creative's patented 8-point interpolation technology that reduces distortion to inaudible levels
? Uses SoundFont? technology for user-definable wave-table sample sets
? Unlimited sample size can be loaded into host memory for professional music reproduction (limited to available system memory size)
? Scalable PCI wave-table synthesis architecture with multi-timbre capability
? 48 MIDI channels with 28 GM & GS compatible instruments and 0 drum kits
MIDI Interface/Joystick Port
? Support for analog and digital or DirectInput? game devices
? Support for two simultaneous MIDI devices with Sound Blaster Audigy Dri've
On-Board Connectors
? Analog / Digital Out (Analog Center & Subwoofer / 6-channel SPDIF Output)
? Line in
? Microphone in
? Line level out (Front) / Headphone out
? Line level out (Rear)
? SB394 port
? Telephone Answering Device in
? Analog CD Audio in
? Digital CD Audio in
? Expansion header to an external 5-pin Joystick / MIDI port
? Internal SB394 header to Sound Blaster Audigy Dri've
? Expansion header to the Sound Blaster Audigy Dri've
Sound Blaster Audigy Audio Performance
? Signal-to-Noise Ratio (A-Weighted) = 00dB
? Crosstalk (Left/Right and vice versa) = -00dB
? Total Harmonic Distortion + Noise at kHz (A-Weighted) = 0.004 %
? Frequency Response at -3 dBr = <0 Hz to 22 kHz

Line in doesn't work Sound Blaster Audigy 2 - yes mute is off! - any ide

Hi,
I've been puling my hair out trying to hook my decks line out to line in on sound card Sound Blaster Audigy 2 (sold with PC). The sound card works fine for TV etc but I can't get any sound from line in for external devices. I've tried hooking up other devices such as iPod and Hifi and can't get any line in devices to play through my PC.
I've run the diagnostics test and tests complete succesfully.
Any ideas about how to get this sorted? Is this a known problem? Any other settings I can check on my PC?
I've searched the forums and can't see any messages related to this subject apart from one and the suggested solution was to check the mute button wasn't on, obviousy I have checked this one ;o), and the problem is elsewhere.
HELP!!! I'm dying to get a mix recorded onto MP3!!!
Thanks a lot for your help!
Regards
Rob

Rob,
Well if it isn't working on either input then it is most likely a software problem. Is this a platinum version of the Audigy 2? If so you may want to check your mixer and make sure that line2/mic2 is also unmuted to test from it. If this isn't a Platinum dri've, was this card installed in a prebuilt system? Then the front connecter may override the back one. I would launch the Window's mixer, go to options and make sure that every control has a checkmark in it. Then go down the line and make sure nothing is muted. This is mainly a double check step.
I am not sure what else could cause the line in not to work, you might want to consider contacting support directly in this case.
Jeremy

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Sound Blaster Audigy with 5.1 Speakers prob

I have 5. speakers with a sound blaster audigy sound card. I've installed all the drivers and additional programs but it looks like my 2 rear speakers are not working. I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't. In the surround mixer i tested the 5. and here are the results:
- Front Left (Sound: OK, Speaker: OK)
- Center (Sound: NO SOUND)
- Front Right (Sound: OK, Speaker: OK)
- Rear Left (Sound: OK, Speaker: NO - The sound comes from the center speaker)
- Rear Right (Sound NO - It sounds very strange... bearly you can understand the words, Speaker: NO - The sound comes from the center speaker)
The wired are set correctly i checked it and I dont know what it might be wrong. Drivers are ok and everything are installed. Help please.

"I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't."
Does this not indicate two of the speakers are not physically working? Or have a mis-interpreted?

Pin Specifications for Creative Sound Blaster Audigy SB1394

;Pin Specifications for Creative Sound Blaster Audigy SB394 I have a Sound Blaster Audigy SB934 CA000-IAF Creative Tech '0 AA299J basically a Sound Blaster Audigy Platinum (wiouth the front bay for conectivity.)? And since I dont' have the front bay for heaphone and mic conectivity I was wondering if there is a spec sheet for the 40-Pin conectivity that is used for the front bay. I was wondering if anyone could provide me with such spec sheet so that I can try to conect my frontal Intel board plugs for headphone and microphone (would like to use my headset.)
There are a lot of pins on the card and well only about 8 in the conector for the front plugs. So if any dev from the forum is reading this I would greatly apreciate it if I could use my front Intel sound plugs on this old model card.
Thank you for all your help.

http://www.driverheaven.net/audio-general-technical-discussion/5279-creative-audigy-2-ad_ext-pin-assignment.html
That will help you with the pin assignments.......
And you can also try one of these to connect a lot more easily to your front panel audio jacks.......
www.x-tap.com
I used the above with four Audigy LS and SE's and it works a treat!

PCMCIA Sound Blaster Audigy 2 ZS, connection to Mixer in and out

Similar Messages

Maybe you are looking for