Pcmcia usb controller doesn't work with Tecra 8200

Hi,
I have an old TECRA 8200 notebook (Intel Pentium III, 847 MHz, 512 MB RAM) OS: WIN XP with latest patches. For it has no USB 2.0 I have bought a PCMCIA USB Controller (Chip NEC). The controller has been recognised but XP is asking for a driver. The controller hasn't been delivered with a driver.
Does any one has an idea how I could get the controller up and running.
thanks
regards
Fred

I mean, independet from the fact that this is not really a toshiba related problem, could you please post the name of the USB PCMCIA device?
I mean the manufacturer or something because if XP asks for a driver then there should be one available, or?
Please, give a feedback and what you could do additionally is to google for the PCMCIA device. The best way is often to search for the chip (in your case NEC).
Regards

Similar Messages

ZTE MF667 usb modem doesn't work with yosemite

I have lost my internetten connection after having upgraded to yosemite. my usb modem (zte mf667) worked smoothly with mavericks. but it stopped to work when i upgraded to yosemite. i can not find a compatible driver either. now my machine is just a harddisk. what would a pc without internet look like?

I have the same problem with modem Prolink PHS101 not working with yosemite, was oke with maverick, apple please help

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

MSI K7N2-L usb 2.0 doesn't work with scanjet 4570c

I have a MSI K7N2-L motherboard with WINXP and SP1 that doesn't work with Scanjet 4570C if I set USB in BIOS to 1.1+2.2. Sometimes it locked up the PC or it showed streaks on the image. It worked just fine if I set to USB 1.1. Does anyone knows this is the problem with the MSI motherboard? I'm sure it was not the Scanjet since it is USB 2.0 supported, and I'd tried another Scanjet and the problem was still the same.

Quote from: Wonkanoby on 21-March-05, 21:14:07
If you are having problems with USB ports, read this topic.
besure you have only 8 wires connected no usboc
Nice topic!
But usb 2.0 DOES work with 1.3, 1.4 and 1.52 BIOSes. Only after updating to 1.5 official one of the front panel ports (not all 2) start works as 1.1

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

Apple Keyboard with number pad doesn't work with Mac Pro?

I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

PXI 8310 Cardbus doesn't work with HP compaq nx9105 laptop

Hi,
I have to install a NI PXI 8310 Cardbus on a HP compaq nx9105 (which is a tested laptop) with a processor ADM Athlon 64, 350 MHz, 1 GB RAM, Win XP Pro. The PCMCIA controllers are "Controller Texas Instruments PCI-1620 Cardbus Controller with Ultramedia".
I follow the instruction of Installation Guide and after installing the Cardbus driver I shut down the computer, I insert the Cardbus 8310, and when I power Up a message of error is showing.
"One or more card was not configured in your system. If you are seeing this message for the first time, please use the NIDocker icon on your taskbar, select 'Reset Bridge Settings', and reboot the system. If the issue persist etc..."
I do these actions and when I reboot the same error arises.
On Control Pannel's System Manager I can see the situation in the attachment. The PCMCIA controller doesn't work and on the properties of the device it is written that "the specified device generates a resource conflict (code 12)".
Please Suggest.
Regards
Pietro
Attachments:
gest perif x Connessione.JPG ‏89 KB

Hi Pietro,
based on the error you are seeing, it might be cause by improper installation of the driver or controller. The installation instructions specify that once the driver is installed you have to reboot the laptop twice before you try installing the 8310. If you complete only one reboot, the driver might not finish the configuration which later corrupts the installation of the 8310. Therefore, try the following:
disconnect the 8310 from the laptop
uninstall the driver
re-install the driver
reboot the laptop twice - after you re-boot once there should be a prompt asking you to reboot again
install the 8310
If this does not resolve the problem, run <a href="http://www.drivertools.net/Products/Utilities/EngineeringUtilities/PCIScope.htm">PCIScope</a> - a third party software (you can get 14 day free trial version) - and send me a capture of the diagnostic. PCIScope is software that is evaluates and debugs the PCI bridge/subsystems.
I have seen the list of laptop compatible with the NI Cardbus, but your PC is tested with a different controller. So it is possible that the laptop is incompatible due the different controller. With the PCIScope capture we can better determine the root-cause of the problem. If this indeed is the case, we will revise our documentation as far as what laptops with which controllers are supported.
MarcoC
NI Italy

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

[SOLVED] External USB mouse doesn't work

I've installed Arch on my laptop and today faced with a problem. When I boot with AC off my external USB mouse doesn't work. Also it looks like USB ports don't work. If I detached AC when working mouse works fine.
I can suppose there is some problem with laptop mode. May be it turns off usb ports to save energy. Anyway quick search doesn't brings any results. If someone give me a hint how to solve this problem I'll be very grateful.
Last edited by avli (2011-07-14 16:53:15)

Well, after diving into configs solution has been founded. The point was to disable auto suspend feature in laptop-mode-tools config by setting BATT_SUSPEND_USB variable to 0 in /etc/laptop-mode/conf.d/usb-autosuspend.conf
Hope this information will be helpful for users who probably faced with the same problem. Thank you!

Apple tv mirroring doesn't work with ipad 2

Apple tv mirroring doesn't work with ipad 2 and last update achieved

you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

I updated to 10.4.7 and now my left USB port doesn't work

Hi all,
I ran Software Update just a second ago, installing an update to MacOS (PowerPC), ITunes, and QuickTime. After the install and the restart, my left USB port is no longer working. It was working immediately before the install.
I have verified that the peripheral that was not working in the left port works just fine in the right one. I have also confirmed that a peripheral that was working previously in the right USB port doesn't work when attached to the left one.
Therefor, I am led to believe that the problem lies in the left USB port. The only thing that has changed is the updater which ran moments ago, and again, the left USB port was working just fine prior to the install.
Has anybody else experienced this problem and knows of a fix/patch/anything I can do?
PowerBook G4 Titanium Mac OS X (10.4.7)

Welcome to the Apple discussions.
I would reset your power management unit, then install the combo 10.4.7 update. Recently, there have been issues with updates through the software update function.
Reset the PMU: http://docs.info.apple.com/article.html?artnum=14449
Download combo 10.4.7: http://www.apple.com/support/downloads/macosxupdate1047comboppc.html

Agilent board doesn't work with NI-488

I have an Agilent GPIB interface board, but it seems that it doesn't work with NI-488 software. I would like to know if there's a way to use these board with LabView because if it's not recognize by NI-488 software I can not use it in an application with Labview

As far as I know, NI-488 only works with NI's GPIB boards and other GPIB Interfaces.
I suggest getting an GPIB interface from NI. If you are looking for a cheap way to do this, try getting a USB-GPIB Interface. They are only $495. Also, ISA GPIB cards are only $395.
Alternatively, try installing the GPIB interface software for the Agilent board, and communicating with it through LabVIEW. Agilent may have a driver for this.

USB webcam microphone not working with Starcraft 2 voice chat

=USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
Any thoughts on this or am I SOL and have to find myself a shiny new headset?

I had the same problem. You need to check the device index of your USB mic.
In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
Remember, that the indexing is 0 based.
The sound framework make the assumption that the index is 0.
Hope that helps.

Phone Software update doesn't work with WiFi

Can someone please help.
I have an unlocked N97Mini. I'm trying to update the software version from 10.something to the currently available 12.something. For some reason my USB chord doesn't work (it only charges the phone, that's it) so I'm unable to use PC Suite. I tried to update the software wirelessly using WiFi but it won't let me do it, everytime I select on Phone Software under Application->SF Update it opens a pop up that says I have to use PC Suite. I uploaded other software through WiFi before such as OVI music, but it won't let me do it for the Phone Software.
Please help. How can I update my Phone Software wirelessly?
Thanks
Andrei

If you get the message that you need to use PC for updating the phone software, the software for your device variant may not yet be available for over-the-air update and you must do it via PC. You can check also if the same thing happens if you type *#0000# and select in this menu Options > Check for updates.
If PC Suite is not working with your device, try installing the latest Ovi Suite version in your PC.

IPod Stuff doesn't work with my new iPhone

I finally sprung for the iPhone three weeks ago and I love it. But I think I'm going to have to buy more new stuff. Neither set of my portable speakers that I use with my iPod (5th gen. video) work with the iPhone. When I put the iPhone in the dock, I get some message about Airplane Mode. Music does play through the speakers, but they won't charge the iPhone. When I put the iPhone on its own charger and tried to use the auxiliary input on the speakers, there was only silence.
Do I need a special cable or something?
Also, my car charger for the iPod doesn't work with the iPhone.
Am I going to have to spring for another set of portable speakers? I've read that the Pure-Fi is compatible with iPhone.
Thanks!

Both my mini and my video iPod were USB -- not Firewire.
Both your Mini and your iPod with video synced via USB and charged via USB when connected to your Mac, but they also support charging via Firewire and most of the older 3rd party devices charged iPods via Firewire - your iPods include firewire pins in the connector for charging via firewire.
The first generation iPhone also syncs and charges via USB when connected to a computer, and the first generation iPhone also includes firewire pins for charging via firewire also, as your iPods include. The first generation iPhone does not support syncing via Firewire, but it does support charging via Firewire.
Apple removed the firepins from the iPhone 3G connector as they have done with all new iPods released after a certain date and for all new iPods to be released in the future. 3rd party device manufacturers were made aware of this so all new 3rd party devices must support charging via USB only or include charging via USB in addition to charging via Firewire if a new device is to be backwards compatible with older iPods.

Pcmcia usb controller doesn't work with Tecra 8200

Similar Messages

Maybe you are looking for