PCR and payroll

hi every one
in the egyption labor low there is apoint considering
the overtime we calculate the day hours =1.35 hours ,& the night hour = 1.70 , but there are employees whos spend alot of time to take over time wich exceeds their basic pay , so we need to make the over time never exceed the basic pay how to make this in the system ?
i know that this done by the PCR but i dont know how to make it to run the payroll
plz help me

hi,
you an either place a check on the number of hours(which ,calculated by the amount will not exceed basic pay) or on the amount of the wagetypes.
transfer the amount/hours to a constant.
Place a check on the maximum number reached or not.
if max reached, the next addition should become zero.
this is how the logic should be in ur pcr.
regds
sowmya

Similar Messages

Tables that store Schemas, PCRs and Features

Hi All,
I wanted to check with al you, if there are any tables which store all the Schemas, PCRs and Features in one place.
If yes, it would be very helpful if you can share these tables.
Thanks in advance !!
Naveen

Hi Naveen,
Table for Payroll schemas are
T52C0 and T52C1 and
Table T52C5 for Personnel Calculation Rules
and table T549D for Feature Directory
Warm Regards,
Kapil Kaushal

Time and Payroll aspects in PA & OM modules implementation

Hi all,
We are implementing PA & OM modules in HR. Time Management and Payroll is not in the scope of the project.
I need to know what aspects of Time and Payroll to be configured for PA & OM implementation. The client has hourly and salaried employees. The hourly employees submit their time sheet (excel) to their managers and then it is forwarded to Payroll (Ceridian). The LOA records are also forwarded to Payroll. So the time, absences and pay are not tracked by HR department. All time and pay details are maintained in HR legacy system, but not processed by HR. In this scenario, what aspects of Time Mgmt and Payroll to be configured? Is there a need to maintain IT0007?
How to set up Payscale Type, Payscale Area, Payscale Group and Level?
Please guide.
Thanks.

Hi,
Do you have plan to maintain It0007 (Planned working time) and IT0008 (Basic pay) as part of PA means do you need to maintain working time and basic pay info for ell employee in SAP system? Ifyes, then you need to configure below steps for IT0007 & IT0008.
For IT0007:-
a) Configure public Holiday and Holiday calendar
b) Define grouping PSA for work schedule
c) Define grouping PSA for daily work schedule
d) Define break
e) Define daily work schedule
f) Define period work schedule
g) Defind ESG for work schedule
h) Set work schedule rules
i) Generate work schedule and assign to employee in IT0007.
Path:- SPRO > PM > Time management >
work schedule (You will get all nodes under that)
For IT0008
a) Configure wage type
b) Define ESG grouping for PCR and CAP
c) Define pay scale type (Path:- SPRO > PM > PA > Payroll data > Basic pay > Define pay scale type)
d) Define pay scale area ((Path:- SPRO > PM > PA > Payroll data > Basic pay > Define pay scale area)
e) Define pay scale group & level (Path:- SPRO > PM > PA > Payorll data > Basic pay > Define pay scale group & level or SM30 >T510)
Then you can maintain IT0008 info for employee.
Regards,
Purnima

Training, Time and Payroll Integration

Hi
We are currently implementing SAP HCM in ECC 6.00 SP60
Could you please clarify the following queries:
1. How can i pay Internal Instructor / Trainer for few Business Events through Payroll.
When i create a internal trainer for a Business Event, automatically attendance type gets recorded in IT2002 based on below mentioned configuration, unfortunately for all business events only one attendance type for instructor and attendee gets recorded in IT2002
SEMIN AINST 0001 Attendance type for instructor in T554S
SEMIN APART 0002 Attendance Type for Attendance in T554S
But is there any way where i can send different attendance types for different Business Events for a instructor /Trainer? So that in payroll i can query on the attendance type in IT2002 and pay him depending upon the attendance type.
Else
Is there any other way where i can pay the internal trainer automatically from TEM to Payroll?
Regards
Srinivasa Naidu

Hi Marry,
please check this document by Woody
Integrating Negative Time and Payroll
some usefull links and information regarding the configuration
integration between Time and Payroll
Best Regards.

Interfaces in Benefits and Payroll

Hi Everyone,
Can anyone send me some documents or can explain me interfaces in Benefits and payroll?

Sikinder thanks for that. But the problem is i want to know what are interfaces and what interface swe use in benefits and payroll.
I am perfect with configuration part. Could you please help me out with that?

CATSDB and Payroll Hours Reconciliation

Hello,
The problem is this: Given a date range from the selection screen, get the hours worked (catshours) from CATSDB and then match it up from the payroll hours (ANZHL) from RT to see if there is any discrepancy.
To solve this problem, I am reading the RGDIR and looping where PAYDT is between pn-begda and pn-endda and strza eq 'A' (active) and void ne 'V'. Then getting the sequence numbers in an internal table and calling the RT table for all the sequence numbers. Finally adding the ANZHL based on LGART.
From CATSDB side, select catshours where pernr eq pernr-pernr, workdate between pn-begda and pn-endda, status eq (from select options), awart eq (from select options) into an itab. Then adding up the catshours in the itab.
The problem is the data is not matching up..is it because the dates (pn-begda pn-endda and payroll periods are not matching up?) what is wrong?
I will reward points immediately..
Thanks

Thanks Manu...I appreciate it. Actually I realized that I was counting the hours multiple times for the same For Period because of the Off-Cycle Payments/Additional Payments etc. I will use "PAYTY EQ ' '" to exlclude the additional runs/off cycles etc. Lets see if it works..

Pre requisits for Internation HR and Payroll Setups

Hi All,
Can any one help me in Pre requisits for Internation HR and Payroll Setups.
Thanks in advance.

Here's some stuff to get you started:
International HR and Payroll (Doc ID 261452.1)
Running International HR and Payroll Setup (Doc ID 278006.1)
HOW TO ENABLE ENHANCED RETROPAY FOR INTERNATIONAL HRMS PAYROLL SETUP (Doc ID 458535.1)
If you have specific problems, please give full details of what they are and error messages (etc) and I'm sure someone can help further.

Issue:Link between Overt time and Payroll

What is the linkup between the overtime&payroll?
Regards,
chikky.
Please use proper Texts for the queries
Edited by: Sikindar on Jul 19, 2011 4:29 PM

Time and Payroll Gets integrated through Sub Schema XT00
OT can be paid with the help of Time evaluation by Passing no of hours from TE to Payroll and valuating them in Payroll
or else in case of No time Evaluation you can Process the overtime thorught IT2010 and process in the payroll
so wht exactly are you looking at for

OTL with Projects and Payroll Integration - Actual Costing

How does the costing work when we have the OTL integrated with Projects and Payroll? (R12.2.4 functionality - Actual Costing)

As explosion process is based on elements, it only applies to payroll. You can use this functionality with Projects and Payroll Timecard Layout, but project will get the non exploded hours.
--Shiv

"Your Benefits and Payroll Information" links referencing the wrong URL-ESS

Hi Everyone,
At my project we need to change the underlying URL for the following links found under "Your Benefits and Payroll Information" page.
Other Benefits and Discount Programs
Family Status Change Form for Mid-year Benefit Changes
Other Benefits Forms
Contacts for your Daiichi Sankyo Benefits
As per our project requirements, the under lying URL for each of the above links should be some destination within our intranet. We made this change in the SAP backend, however when we go to the Portal and click on one of the links we are routed to a non-existent URL. See the examples below for a clearer picture of our issue...
Example
Link in the SAP Backend:
https://intranet.cst.com/site/contentEngine/content.cfm?page_content_ID=10
Link that appears in the Browser:
https://intranet.cst.com/site/contentEngine/content.cfm?sap-ext-sid=UdlIJGAn0j9oUqRvdXQAiw%3D%3DW1T29yaXY6w1Opgh68Tu%2Bg%3D%3D%2Fpcd%3Aportal_content%2Fcom.sap.cst.cst%2Fcom.cst.hr%2Fcom.cst.ess%2Fcom.cst.bpc%2Fcom.cst.roles%2Fcom.sap.pct.erp.ess.employee_self_service%2Fcom.sap.pct.erp.ess.employee_self_service%2Fcom.sap.pct.erp.ess.area_benefits_payment%2Fcom.sap.pct.erp.ess.area_benefits_payment%2Fsap.com%2Fpcui_gp%7Exssutils%2FXssMenuArea%2Fbase&sap-wd-cltwndid=WID1187716517421&sap-accessibility&cm_master_id=7&sap-locale=en&sap-rtl&sap-epcm-guid=E17C87B9D5443FA5D60E8A4091BE470F1F5103DF87581876A294DCD2ACFB6061&page_content_ID=10&sap-wd-renderMode=viewArea&sap-ep-version=7.00.200705080819&sap-wd-tstamp=1187724894684&sap-cssversion=7.0.9.0.0&sap-wd-app-namespace=zzzz&sap-cssurl=http%3A%2F%2Fcst.spcsm.carsenst.com%3A50000%2Firj%2Fportalapps%2Fcom.sap.portal.design.urdesigndata%2Fthemes%2Fportal%2Fsap_tradeshow%2Fur%2Fur_ie6.css%3F7.0.11.0.0&sap-wd-finish-rendering=false
We tried to go around this issue by creating a URL iView and then calling the URL iView from the SAP Backend. So instead of a valid URL we entered the location of the iView (ROLES://...) in the backend. This also, had the same result as before...The URL iView is launched, however the URL iView has the second URL.
Not sure what is causing this...any ideas?
Thanks!
Guy

Christopher,
Thanks for your reply! I created a resource with fields Window Properties populated with "_blank" and a URL specified in the URL of Resource Object field. I then create a Service and assigned the Resource to Link Resource and chose "Direct Url launched in separate window" for the Service Type. I then assigned the Service to the a Subarea.
The result was the link did not show up. When I add the URL to "URL of PCD Page" and "Directory Path" in the Resource area the link shows up but does the above with the URL.
Thanks
Guy

Cluster database and payroll database

please let me know what is a cluster database and payroll database, and what are the structures involved in it.
please let me know as soon as possible as it is very URGENT.
ADV THANX
REGARDS,
VETRIVEL MURUGAN

You didn't say what platform you are using. I have done clustering with 11i (CRM and HR/Payroll) on Solaris 8 using Sun Cluster 3.
If you look at http://docs.sun.com/db?p=prod/cluster you will see a number of documents on the subject of clustering. The Data Services guide will tell you clustering an Oracle database and TNS listeners.
If you want to cluster other components to failover (Apache, Concurrent Manager, Forms Server) you will have to write start, stop and probe scripts for Sun Cluster 3 GDS to use.
Payroll is the 11i Application suite that delivers payroll functionality, though Oracle are not the only ones that provide this type of software.

Regarding PCRS and Schemas

Hi All,
I am excited to learn PCRS and schemas .., i have help documentation with me.
But no idea how and where to start.
Appreciate for the right advice.

Hi Raja
Check out links
http://www.sd-solutions.com/documents/SDS_Payroll_Schemas.html
http://www.insightcp.com/research.htm.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d51e68575e11d189270000e8322f96/frameset.htm
I hope these will help you.
---Bob Radi

Learning PCR and Workflow

Hello,
I am basically a Webdynpro for Java guy and want to learn Workflow and PCR for MSS and want to know whether I need to learn ABAP first....if then what is the level I need to dig in ...and how should I start..?
Any help would be highly appreciated.

Hi,
You need atleast a little ABAP knowledge to work on the workflows.
To start -->
1. Search in SDN Library. There are many good docs on PCRs.
2. In SAP Insider there was a document submitted by Alan Rickayzen on PCRs. This will give brief overview on PCRs and its uses.
3. Search this forums for posts on PCRs (especially the replies by Jocelyn Dart and Rajasekar).
Thanks,
Prasath N

Is there link between account receivable and payroll module ?

In Account Receivable :( I have This Case )
How to record a sale to an employee? How to record it as an employee loan without effecting bank or cash records.
is there link between account receivable and payroll module ?
this solution i suggets bellow , is valied solution?
Define Invoice transaction type "Employee Sales "
This Type will affect (Receivable ) Employee Account
In Payroll Module :
( Manually )TheEmployee Sales invoice will sent to payroll department to extract amount from employee , this extract Will credit the same "Receivable" Employee account

Employee Loan in AR can be tied with Element Balance of payroll.you should have to develop some mechism to get the money from AR and update into Payroll element balance, this way you can manage your employee loan without touching bank.
There is no seeded functionality comes with AR that have such capability.

Integration between Time Management and Payroll

I configured Time Management and Payroll....
Before It created a problem in time management in absence quotas...
for testing payroll I deactivated schema DAYPR that is time data processing....
Generated absence quotas correctly
Now I activated DAYPR still in display log i dont see any integration with time management....
I changed the time management status to 7 and 9
still its not integrating with Time Management
what is that I want to do to integrate time management with payroll

Payroll is not integrating with Time Management
In Log I can see No Time Management Integration
I configured Time Management and Payroll....
Before It created a problem in time management in absence quotas... it throwed an error in DAPPR
for testing payroll I deactivated schema DAYPR that is time data processing....
Generated absence quotas correctly
Now I activated DAYPR still in display log i dont see any integration with time management....
I changed the time management status to 7 and 9
Payroll is running with out time management
still its not integrating with Time Management
l

PCR and payroll

Similar Messages

Maybe you are looking for