PCR Forms not shown in MSS

Hi All,
We are on ESS webdynpro 600, EP 7.0, ECC 6.0 and trying to implement the PCRs (standard) in MSS.
As per [this documentation|http://help.sap.com/saphelp_erp60_sp/helpdata/en/02/560f41ca73d349e10000000a1550b0/frameset.htm], we have configured the ADS with J2EE stack of Portal and tested the same from Portal using webservice navigator - it is successfull.
However, it is giving the same error message as shown below :
com.sap.tc.webdynpro.services.exceptions.PDFDocumentCreationException
The above error message is same for other E-recruitment applications which uses the Adobe forms.
P.S : We have not done necessary configuration settings in ECC backend for connecting ECC ABAP system to ADS and Is it necessary to do this ? since, the Adobe forms are based on Java WD and will run on Webdynpro runtime of J2EE stack.
When we run the report (FP_TEST_00) in backend, it gives the error message "http SOAP exception error" message - which reveals that the connection to ADS is not successfull. We have raised an OSS note with SAP and SAP has told that - since we are on X86 hardware platform where our ECC server is installed.
Pls shade some light - how to run this PCR forms succesffully !!! I am I missing any steps ?
Awaiting for your valuable inputs in advance.
Regards,
Anil Kumar.

Hi Anil,
It will be sufficient if you configure ADS on J2EE server only for Portal apps, no need for doing settings for ABAP .
From the error it seems ADS is not working properly on the J2EE engine, try configuring & testing ADS using the guide below:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6
Hope this helps!!
Regards,
Arafat

Similar Messages

Forms not shown correctly on ipad

I have edited a form and made changes , it is absolutly fine under windows and easily filled out it is posted on workspaces too but people with ipad,iphone have problem first of all the form changes I made is not shown on theirs and they cannot fill it out why?

Application is displayed correctly in Mozilaa Firefox even in 1024*768 resolution.
But problem is seen in IE.
So I think, code is not sensitive to resolution. But some problem with Flex in IE in this resolution.

MSS PCR form not pulling data for a user

Hi All,
On Organizational/Position Change Form(on Portal) one of the user don't see the data in the dropdowns in this form.
But for other users it is working just fine. The user not able to see the data in drop down can access other PCR's.
I was wondering if there is a way we can test the form for the same user in the backend. If we can test him in the backend and the values are being populated for this user then there is a Portal problem.
Can you please tell me how can we test this form for this user in the backend.
Thanks in Advance,
Joe

hi ,
You can put external breakpoint in the BADI method and try debugging it by opening adobe form from
portal.
thanks ,
sahiba

Adobe form not working after MSS Patch Upgrade

Hi,
We have implemented ESS/MSS and in one of the MSS scenario to create a new personnel chnage request we have an Adobe interactive form (WD) which actually validates the users Social Security number by calling an RFC in the ECC 6.0 and updates the form's filed on the front end. There was an issue of "Expired SSO Ticket" and to resolve this SAP recommended to apply SAP_JTECHS (SAPJTECHS13P_14-10003467) and SAP_JTECHF (SAPJTECHF13P_15-10003468) patches to fix the problem. But after applying these patches Adobe form for PCR has stopped working and it just gets hanged, form appears on the front end and when user enters the values and hit enter to validate, it doesnt communicate with the Backend ECC system only the SAP status picture keeps rotating, i turned the trace ON and checked it, its not at all communicating with the ECC system. Where as in other systems where we have not appplied the pacthes, those are working fine. One of the error i noticed in the server log is as below:
jco.client.mysapsso2=AjExMDAgAA5wb3J0YWw6QkNPTFNUT4gAE2Jhc2ljYXV0aGVudGljYXRpb24BAAdCQ09MU1RPAgADMDAwAwADU1BEBAAMMjAwODExMDMxNjU3BQAEAAAAEAoAB0JDT0xTVE//AQUwggEBBgkqhkiG9w0BBwKggfMwgfACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB0DCBzQIBATAiMB0xDDAKBgNVBAMTA1NQRDENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDgxMTAzMTY1NzQwWjAjBgkqhkiG9w0BCQQxFgQUfD7V7TS!58cgzIFyucxCSL4ltuswCQYHKoZIzjgEAwQvMC0CFA4Q0!Rr2xYFPwFwXz8WeFF1UALlAhUAmHiTdHw!3s4Q!Jc9gDyY4QSvxa4=, user=, mshost=sapdv2.company.com, r3name=DV2, jco.client.type=B, jco.client.trace=0, group=SRS, codepage=1100}
Client not connected#
#1.5 #76C1EDD07B440026000000000007501600045ACC2EF6809D#1225732914577#/Applications/BusinessLogic#sap.com/home~zb2bzsrs#com.sap.isa.core.eai.sp.jco.JCoConnectionStateful#BCOLSTO#1480##hadspd1.bnet_SPD_306896250#BCOLSTO#daca9e30a9cb11dd99c976c1edd07b44#SAPEngine_Application_Thread[impl:3]_19##0#0#Error#1#/Applications/BusinessLogic#Java###Error occcurred in EAI layer "".#2#com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in module RSQL of the database interface.#parameters: [client]='null' [user]='null' [language]='null' [ashost]='null' [systemnumber]='null' [mshost]='null' [gwhost]='null' [gwserv]='null' [group]='null' [systemid]='null'
Properties: {passwd=?, lang=en, client=150,
Can someone please suggest what could be the possible reason for such a problem with Adobe form and whats the way out to resolve this. Appreciate a quick help in this regard.
Thanks in advance,
Sarabjeet.

Hi,
We had the same issue after the Patch update to SP17 in both Backend as well in Portal, to resolve my colleagues had a look at the standard forms which were working and found that because of the patch update the script used in the custom forms was changed and not the standard and
on event trigger which was processed in the container they replace the script to the standard one. and it started working.
But this is not the solution we are looking at solution on having the same version of script as in the standard even after the patch update.
So to your point to resolve compare the scripts in both standard and customized forms and do the same.
And also have a look at the SAP Note: 1109392
.... this is a temporary solution.....
Hope this helps.
Cheers-
Pramod

PDF (Designer7) forms not shown in Acrobat 6 or 5

I have created a simple PDF form with Designer 7, look at:
http://www2.fht-esslingen.de/info/11.pdf
This form can only be shown on Windows PC with Acrobat 7 Prof. not in Adobe Reader 7 or Acrobat 6 or 5.
Can anybody explain me who to create a form with Adobe Designer 7 and to use this form with Adobe Acrobat 5, 6 and Adobe Reader 7? Designer 7 is a good tool to create forms, but if nobody can read it, expect Adobe 7 Prof., than it is worthless. I tried to convert this Designer 7 form in Acrobat 7 Prof. into PDF-version 1.4, but these doesn´t work. I can´t find way to do this. Has anybody a workaround for my problem?
Best regards
Klaus

I can open your form in Acrobat 6.0 , Acrobat 7.0.5 and Reader 7 without any problem. I don't have Acrobat 5 so I don't can't tell if it can be opened in Acrobat 5.

MSS PCR form

Hi gurus,
I am having problem with custom made PCR forms in MSS.We added fields for the PCR in MSS and implemented the BADI QISR1 to bring the values to the form.But when the user clicked on the review button the custom fields are not returning the data back to the BADI.I had already created the binding and everything in Adobe form.Please help me it's very urgent.
we are in ECC 6.0 and using MSS 1.0 version.
Thanks,
Rao.

Hi
Did you get a chance to look at the OSS notes.
Pl do reward, if helpful.
Thanks
Narasimha

PDFObject Exception in MSS PCR Forms

Hi All,
I am running MSS 60.1 on EP 6 SP 9 with ECC 5.0 as the backend.
I am having an error with the Adobe based PCR Forms in MSS which goes like this:
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
     com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (302) Found.
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:201)
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:142)
     at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:398)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:104)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1085)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:393)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:635)
I have installed ADS with credentials and configured it as per SAP Note:813800 and the ADS Config Guide.I have created a User with Basic Authentication and I have created destination FP_ICF_DATA in Java Environment as well created User in ECC 5.0 and assigned SAP_BC_FP_ICF roles as well as activated neccessary paths.
When I test the service using the URL http://<host>:<port>/AdobeDocumentServices/Config (no data inout in the fields but only with User ID and Password); I get the same error as Invalid Response Code:302
Is there any other configuration or steps that I should follow. Has anyone faced the same Problem befoer. Kindly help.
Points will be awarded.
Thanks & Regards,
Shyam.

Dear Raja,
I loggged into Visual Admin to change the value of sap.ADSCallingMode", from "http" to "soap. but that particular property is not maintained in the default property sheet in the following path
Server -> Services -> Configuration Adapter -> webdynpro -> sap.com -> tcwddispwda.
but you can see in the error trace i have given above that it is a SOAP based request. I am on EP 6 SP 9; will I have to upgrade or is it any other problem?
Regards,
Shyam

MSS PCR form in german in production system

Hi gurus,
We are having a problem with the PCR Change Employee group and sub group.
The adobe forms is coming out in English in both Development and Quality.But in production it's comin in german.We haven't changed anything in the form.But when we change it and transported it .Then also it's coming in english in Dev and Quality but in production it's still comin in german only.
We are in ERP 2005 and we are using the MSS 1.0 BP.
Any help is really appreciated.
Thanks,
Rao.

Hi,
Could you please let me know if you have resolved it.
I want to see the PCR forms in some local language. I am able to see the other contents in local language but not the PCR Form.
Thanks
Regards
Santosh

How to add table data to an MSS PCR form?

Hi All,
I am new to Adobe Interactive Forms and I need to add a table of information to an existing form. This form is a customized version of an MSS PCR form Request for Termination. Currently the form fields are populated by an implementation of BADI QISR1. It is a copy of implementation HRWPC_PCR and uses the internal table special_data. All the fields currently on the form are single fields and I can see how they are populated. However I now want to add the contents of an internal table. I have read through the ISR cookbook but I cannot work out how to get this data onto the form and how or if it should be stored in the special_data table. The table (LOAN) has been added to the context and has 4 fields. Would anybody be able to provide some direction to me? Please let me know if I have not provided enough information.
Thanks very much!
Ashley

Hello Ashley,
you are already close to the solution. In BADI QISR1 you simply fill the
table SPECIAL_DATA e.g.like
fieldindex = 1
fieldname = 'FIELD1'
fieldvalue = 'Value1'
fieldindex = <n>
fieldname = 'FIELD1'
fieldvalue = 'VALUE<n>'
Then on the Adobe form layout (Adobe Designer), you have to use the table control XFO from the standard library. Here you have to bind then the corresponding column to FIELD1.
Best regards,
Simon

Used a template to create form. when I run it from a page, the template is not shown

I have created a form based on a template. When I run it from the applications page I can see the template. I then added it as an application component item with a folder in a content area. I have then published this folder as a portlet in a page. When I the form from the portlet within that page, it opens up in a new window but there is no template.
How do I get the template to show when I run it from the portlet ?

It is true that the template is not shown when the form is run as a portlet. But, with a small amount of coding in the additional pl/sql section, you can display the template.
Steps :-
1> Edit the form and go to the additional pl/sql section.
2> Put the following code in the "...before displaying the page" area
declare
l_mid integer;
l_title varchar2(32767);
l_template varchar2(200);
begin
l_mid := p_session.get_module().id;
l_title := p_session.get_module().title;
l_template := p_session.get_module().template;
<portal_schema>.wwv_headings.show_header
p_template => l_template,
p_heading => l_title,
p_help_link => <portal_schema>.wwctx_api.get_proc_path('wwa_app_module.help')
|| '?p_module_id='||l_mid
end;
3> Put the following code in the "...after displaying the page" area
declare
l_template varchar2(200);
begin
l_template := p_session.get_module().template;
<portal_schema>.wwv_headings.show_footer
p_template => l_template
end;
Note: replace <portal_schema> with appropriate your portal schema .

Setting up a sample PCR form in MSS

Hello All,
We are planning to implement MSS. Initially , to start with and to see how the look and feel is , there is a need to to set up MSS and configure a PCR form ( ex.. Request for Separation).
following steps will be taken care by one team ( As per SAP Library for MSS)
   1.      Setting Up the System Landscape.
   2.        Assigning Portal Roles to Users.
   3.       Configuring the Internet Graphics Service.
   4.       Configuring the Adobe Document Services.
   5.       Setting Up JCo Connections for MSS).
   6.        Setting Up the Universal Worklist.
   7.        settings for the individual iViews .
Question : Since we are planning to use a standard delivered PCR form..
                 what is the level of configuration needed on the R/3 ( IMG/SPRO) side.   Also what level of customizing is needed for ISR settings.
In short , just trying to get an estimate of how much of an effort will be needed from backend ( R/3 or IMG side) to set up MSS and to test a standard PCR form
using as much standard delivered stuff as possible.
Regards,
Mark

It depends on the version of SAP & MSS.. anyway for an out-of-the box PCR, the effort would be minimal.. you might need the assistance of a Workflow resource to activate the workflow & setting up the Agents etc.. If you don'thave to add any additional fields to the PCR, I don't think there is anythingelse to do..
~Suresh

Adobe for MSS PCR forms with 46C back-end???

Hi all,
A quick question - is it possible to use Adobe document services for PCR forms when the back-end R/3 system is 4.6C? Or do we need to be on Enterprise or ERP?
From what we've seen it appears that the ISR functionality in 46C is not enabled to allow selection of an Adobe form - thus ruling this form option out for 46C PCRs, meaning we'll use JSP forms instead.
Can anyone confirm whether this is the case, and/or provide details of what they have done for PCR forms in 46C?
(we do have a WAS 6.40)
Many thanks
Ross

Hi Markus,
Your response does not line up with information that I have found on SDN:
10. Can Interactive Forms work within, for example, an SAP R/3 Enterprise or 4.6C system? Is it alternatively possible to run an external SAP Web Application Server 6.40 instance with a lower-release SAP system?
Interactive Forms is shipped as a part of SAP Web AS 6.40. SAP Web AS 6.40 can be connected to lower-release backend systems to exchange data (using RFC).
If you want to use forms in interactive scenarios, you can use technologies such as an RFC connection to exchange data between your application system (for example, SAP R/3 4.6C) and the SAP Web AS 6.40, which includes the required Adobe technology.
If you are working with high-volume printing scenarios, consider that the customization of print forms is optimized for use within SAP applications.
This means:
·At design time, you create relations between application data and form objects based on a common SAP dictionary.
·Form templates are available within their corresponding SAP applications. Templates are delivered by SAP only as part of an application.
·Performance is optimized for bundled systems, i.e. an SAP application system and its technological platform.
SAP recommends that customers
·Use the same system for application and form printing services in high-volume scenarios
·Work with SAP-delivered form templates in the corresponding application. (If you use SAP NetWeaver for form printing services only, you will need to build your scenario from scratch.)
Please note: If you are planning a high-volume printing project using SAP Web AS 6.40 and an existing, lower-release SAP solution, please turn to your SAP consulting contact for detailed guidance.
If I am reading this correctly, you just need to install WAS 6.40 with the Adobe Services on it and then cerate an RFC to the 4.6 SAP system. Is this correct?
Regards,
Todd

Error in PCR Form in MSS

Hello Everyone,
I am facing an issue when loading the PCR forms. Upon selecting and employee and clicking on 'Select Form', I am getting the following error:
The following ABAP Exception occurred: INTERNAL_ERROR:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:98)
     at com.sap.xss.hr.pcr.FcPcr.callRFCSelectScenarios(FcPcr.java:284)
     at com.sap.xss.hr.pcr.FcPcr.getScenariosList(FcPcr.java:209)
     at com.sap.xss.hr.pcr.wdp.InternalFcPcr.getScenariosList(InternalFcPcr.java:280)
     at com.sap.xss.hr.pcr.FcPcrInterface.getScenariosList(FcPcrInterface.java:122)
Caused by: com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFC_Fault_Exception: Fault name: INTERNAL_ERROR, fault text: INTERNAL_ERROR
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
Can anyone provide me with information on why this error is occurring.
Best Regards,
Motaz

have you checked in backend using Hrasr_test_process for the same process?
Apply the note 1424239. This should solve the issue
Please follow the steps in note 1407894 and 1410579
Personnel Management > HR Administrative Services >
Configuration of Forms/Processes > Process Configuration >
Set Up Processes > Validity for Process Start >
Define Properties of Object Types
On our internal systems, we have the next entries:
ObjectType Agent Role View Group Name             ObjTypeTxt TRUE
P          HRASRA     MSS_TMV_EE HR Administrator Person     X
P          HRASRB     MSS_TMV_EE Manager          Person     X

MSS Hire form not populating vacancy positions

Hi, recently we have done QA server refresfh activity and taken the replica of Production server. Now the issue is after refresh
1. Hire form not populating vacancy positions from R/3.
2. In MSS Employee search with personal number showing no data found. Could you please suggest?
Thanks in advance.
Regards
Krishna

Hi,
I have investigated further and could find something as below:-
1. There is a standard method DETERMINE_SEARCHHELP from class CL_HRPA_GENERIC_F4 which gets called.
2. Inside this method there is a function module F4IF_DETERMINE_SEARCHHELP which inturn calls function module DD_SHLP_GET_HELPMETHOD. The later function module takes tablename, fieldname, and sy-langu as parameter to give SHLP as search help output. Following values are getting passed to the function module:-
                                     Tablename = HRASR00_HIRE_F4_CORE_FIELDS
                                     Fielname = PLANS
                                     Sy-langu = E (Default)
However this returns parameter SHLP as blank.
There is a subroutine 'shared_buffer_imp_interface' in the function module DD_SHLP_GET_HELPMETHOD which has the following IMPORT statement:-
IMPORT shlp
         callcontrol-attachkind
         timestamp timerelobj_tab
         FROM SHARED BUFFER ddshoffld(if) ID sh_buf_id.
This IMPORT statement is returning sy-subrc EQ 4 and hence finally SHLP does not have any value. So the position dropdown is not populating.
Also when the following parameter is passed, we get F4 help for PERSG (Employee group field):-
                  Tablename = HRASR00_HIRE_F4_CORE_FIELDS
                  Fielname = PERSG
                  Sy-langu = E (Default)
This is because in this case, the above IMPORT statement returns the table T501 and T501T and hence finally SHLP has the value.
Can anyone of you please provide me your expert opinion as to how i can get this working for fieldname = PLANS and hence position dropdown.
Thanks,
Rupesh

Acknowledge No not Shown in Form 16 in HR

Dear Gurus,
i have run the form 16 ,in that Acknowledgement no is not displayed in the form 16 ,is there any configuration ,patches and notes are there or kindly send me the process of updating the Challans and where to maintain the Acknowledgement no is there any table i have maintained the 4 th quarter
thanks and Regards
Ritesh Sharma

Dear ,Kanupriya,
all the Steps which you have send to me ,i have already done,but i have create the data for year 2006 ,40ACK and 40ECC we have maintained but still in form 16 Acknowledgement no is not shown.
is there any more process for maintaining the Acknowledgement no ,kindly send me.
thanks and regards
ritesh sharma

PCR Forms not shown in MSS

Similar Messages

Maybe you are looking for