PCR Work Flow Error
Hi,
I am working on PCR WorkFlows, the problem i am getting is .. when the PCR is executed from MSS it is coming to UWL as task . But when try to open that .. it is giving me the error like ....
"Critcal Error.
Message number cannot read from Workflow Container...."
When i check through SBWP there i am getting one error in step History... Saying
" HTTP handler for starting an external service cannot be read "
Can any one tell me wt could be the problem ? Am i missing some config ?
Regards,
Srinath
Hey can you check the config in SWFVISU .................the re -register your task on portal.
Along with this check this link [link1|HTTP handler for starting an external service cannot be read;
Similar Messages
-
While Processing one ASN in EBIZ we are getting below work flow error.
Hi Gurus,
while processing WF details , i am receiving following erorr in one of node process. Can you please give any sugessions from your end why this error will come and resolution ways.
thanks in advance
issue details are below :
Error Stack Wf_Engine.CompleteActivity(NVISPASN, 36562, STOP)
NVISP_EDI_856_PREPROCESS_PKG.CompleteParentStop(36562-100101309584-1)
Wf_Engine_Util.Function_Call(nvisp_edi_856_preprocess_pkg.CompleteParentStop,
NVISPASN, 36562-100101309584-1, 230620, RUN)
for ref please find below screen shot.
and we retry same work flow by clicking retry button on the screen.
so the work flow was completed successfully.
and processed one more ASN for this ASN also got same work flow error.
could you please suggest the solution to avoid this error.
it is customized work flow but we are getting WF standard error.
thanks
raghavaAccording to error, it appears that child flow activity trying to push the parent flow notified activity. Could be that parent flow is not ready/notified when child tries to push it.. Check for timings of 1) begin and end times of child activity 2) begin & end times of parent activity . If this is timing issue, add defer activity for child flow to wait till parent flow comes to required status.
-
AE Work Flow Error in creating request. Path Not Found
Hi There,
I am working on GRC 5.2
I Have lot of questions regarding this tool...
I am getting this error when i am trying to submit a request..
Please help me in configuring the AE and guide me with the basic setup.
Work flows and rest of the things..
Thanks in advance
RaghavBuddy,
I have done config using Guide...
I am able to submit request from the GRC end ...i am getting this below status message
Request successfully got created and got approved with provisioning. Request no : .
Approval Path Status
(Status : APPROVE)
1. Auto-Provision ( Status : Approved )
[system
But nothing is changes in ECC system..as per the above request when the system complete the request User ID should be created automatically in the back end but its not happenning.
Please guide me -
Hi Friends,
When I am changing a role and triggering in the work flow for approval it is showing following error
2010-05-11 09:09:28,251 [SAPEngine_Application_Thread[impl:3]_32] ERROR User : not found to get full name
2010-05-11 09:09:47,607 [SAPEngine_Application_Thread[impl:3]_25] ERROR
java.lang.Throwable: java.lang.NullPointerException
at com.virsa.re.workflow.client.WorkflowRequestClient.getRoleProcessContextDtos(WorkflowRequestClient.java:284)
at com.virsa.re.workflow.client.WorkflowRequestClient.execSubmitRoleApprovalWF(WorkflowRequestClient.java:83)
at com.virsa.re.workflow.actions.WorkflowRequestAction.submitApprovalRequest(WorkflowRequestAction.java:95)
at com.virsa.re.workflow.actions.WorkflowRequestAction.execute(WorkflowRequestAction.java:54)
at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
FYI.. It is happening with the roles those are uploaded earlier not when I am creating any new roles.
Please Help.
Regards,
SatyabratHi Satyabrat,
Which patch level you are on? Although seems not related to your issue, but there is a bug in Patch 11 -
1. It doesn't update Approver from ERM-Workflow-Approver criteria
2. it doesn't update criticality level ( if you didnt upgrade from Patch 8 to 9 and went on directly to patch 11).
If you have any of above issues, then old roles and copy of old roles will not work properly.
Check if you have criticality level defined and also try to change approver in ERM Role modification screen.
it seems the configuration is correct as new roles are working fine but to make sure also check in CUP whether the first stage of Role creation is defined as webservice.
Let us know if it helps.
Regards,
Sabita -
Dear friends
I am configuring work flow in SWU3, for Check Entries from HR Control Tables its showing an error message like
Any inputs how to configure this one
Important settings
Information Active plan version 01
*Warning* Transport of PD objects is not active
Information Automatic transfer of substitution is active
Information Results check during rule resolution is active
*Warning* Task buffering is active
Information Most important object types are in table T77S0
Information Most important transaction codes are in table T77S0
Determination of Transport Objects
Information Determined Transport Objects: PDST_LSO , PDWS_LSO
Transport object PDST
Information Table SOBJ is consistent as regards key tables
**Error** Table HRP1055 Not an entry in table SOBJ
**Error** Table HRP1071 Not an entry in table SOBJ
**Error** Table HRP1072 Not an entry in table SOBJ
**Error** Table HRP1080 Not an entry in table SOBJ
**Error** Table HRP1081 Not an entry in table SOBJ
**Error** Table HRP1082 Not an entry in table SOBJ
**Error** Table HRP1261 Not an entry in table SOBJ
**Error** Table HRP1271 Not an entry in table SOBJ
**Error** Table HRP1291 Not an entry in table SOBJ
**Error** Table HRP1509 Not an entry in table SOBJ
**Error** Table HRT1509 Not an entry in table SOBJ
**Error** Table HRP1511 Not an entry in table SOBJ
**Error** Table HRP1512 Not an entry in table SOBJ
**Error** Table HRP1513 Not an entry in table SOBJ
**Error** Table HRP1514 Not an entry in table SOBJ
**Error** Table HRP1515 Not an entry in table SOBJ
**Error** Table HRT1515 Not an entry in table SOBJhi
have you transported recently any transport request. please check the status of that. its went wrong with error code. 0. -
Service WO through IW31 (Control Key-PM03)- PR gets work flow error
Hello All,
When we create a Service Work order (Control Key "PM03") through the operations tab in a Work Order(IW31), When we open the PR we recieve an error:
"Entry missing in table for Fund Center SP/"
The work flow recieves an error message and an email will not be sent out to be approved.
Any suggestions on to fix this.
Thanks...Thanks Pete,
Here is the error when we open the PR in ME53n or ME54n: "Entry missing in table for Fund Center SP"
We checked our work flow table and the SP fund center is correct.
When we create a service pr through me51n we do not get this error. Only when we create a service PR through IW31 (Control Key- PM03).
THanks. -
Ambiguious work flow error while creating SC
Hi Gurus,
I am getting error while creating the shopping as" ambiguious work flow".
Can you tell me how to fix this??
Thnaks,
EswarHi Eswar,
If you get kind of error when system is unable to detect any workflow while creating SC.Try to see the condition in workflow.
I feel that two Workflow are trigerred for same SC.
Please check the setting for workflow for Shopping Cart.
IMG / Supplier Relationship Management / SRM Server / Cross-Application Basic Settings / SAP Business Workflow
In my system for setting SC workflow.
I have these two workflow active.
Shopping Cart
WS10000060
Workflow Without Approval Shopping Cart
WS14000109
Shopping Cart Approval n-step over Value Limit User Spend Limit
Please check at your end.
Regards,Nishant -
Hi ,
i am working in a support enviroment .
My client is using workflow for doing Postgood receive and network activity(project network ) updation .
It is failing to update network activity 70% cases .
I have a little knowledge in workflow .
i want to know the Function modules it is using to do the job .hi,
look this.
Workflow Trace On/Off - SWU8
Display - SWU9
Delete - SWU10.
Work Item Analysis - SWI1
Identifying workflow for the work Item :
Tx : SWI1 - Enter the workiem id which has been identified in workflow log
The details consists of workflow of the workitem.
WorkFlow Errors :
1. Workflow Not Started - Using Event Trace we can Identify
2. Started but No Proceeded - Wrong Object Keys
3. Problem in Work Item Execution
Dialog Work Item - Agent Determinaion Error ( Position,Role,User )
- Role Resolution Error
Reqd Element would no be
Set in Binding
Background Work Item - Make Foreground and Test once Sucessfull make it Back round
some good links.
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
/people/mike.pokraka/blog/2005/07/17/sap-business-workflow-faq
rgds
anver
if hlpeed pls mark points -
Dear All,
While creating a Purchase Order Release Strategy the following error is coming in Business Workplace.What to do for this
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage with errors deactivated.Hi,
Check the worklfow container whether the required variables are defined in it.
And also don't do auto binding, I request you to drag and drop the variables manually for binding.
Regs,
Venkat -
***URGENT*** Time Based Work Flow ERROR/PROBLEM
Knowing that the PRE() function doesn't work smoothly with the wait function. We went ahead and added it in the conditions statement and disabled the reeval check box, but the problem is it appears that it is still checking the condition. Anyone have this problem or possible solution?
Edited by: 783027 on Jul 26, 2010 3:49 PMSee answer to your previous post.
Jai wrote:
> Hi ,, I am trying to use time based delivery of message in WLServer7.0. After going
> through the various posts I figured this is the snippet required to send time-based
> messages. But i havent had any luck on it as yet. Can someone please point out
> where am I going wrong in this or send a snippet of code which does this.
>
> here is snippet of code ....
>
> /*initialization */
>
> qconfactory = (QueueConnectionFactory) ctx.lookup(JMS_FACTORY);
> qcon = qconfactory.createQueueConnection();
> qsession=qcon.createQueueSession (false,Session.AUTO_ACKNOWLEDGE);
> queue = (Queue) ctx.lookup (QUEUE);
> qsender = qsession.createSender(queue);
> msg = qsession.createTextMessage();
> qcon.start();
>
> /* actual bit which does sending */
> Date later = new Date();
> long now = System.currentTimeMillis();
> GregorianCalendar cal = new GregorianCalendar();
> cal.getTime().toLocaleString();
> System.out.println("The current time is: " + cal.getTime().toLocaleString());
> now += 10*1000; later.setTime(now); cal.setTime(later);
>
> msg.setText(message);
> ((WLMessage)msg).setJMSDeliveryTime(cal.getTime().getTime()); ((weblogic.jms.extensions.WLMessageProducer)
> qsender).setTimeToDeliver(cal.getTime().getTime());
> qsender.send(msg);
>
> Many Many thanks for your swift response ...
-
Work flow in error when executed with a user decision.
Hi,
I am executing a workflow for notification of absence. It has a user decision step to Revise the request or to withdraw it when the absence request is rejected by the approver. When I am executing this the workflow is going into error state. User decision step is not starting at all. The first two steps create notification of absence and check notification are getting completed successfully.
Please let me know where I am going wrong.
Thanks & Regards,
Soumya.Hi,
I believe the orginal poster is following the workflow tutorial in the sap help.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/fb/135962457311d189440000e829fbbd/frameset.htm
I'm following the instructions and pretty sure it's been followed exactly on each step but am hitting the same issue - see 'Unit 10 - third step'.
The log is reporting two errors
Work item 000000014093: Object FLOWITEM method EXECUTE cannot be executed
and
Error when processing node '0000000039' (ParForEach index 000000)
You reject the notification and then the work flow errors.
Can anyone help? -
File not found error at Attachement link in GroupVote of Human Work Flow
Hi Gurus
In Human Work flow,
I have created the GroupVote and assigned to two person.
I checked "share attachments and comments" to share their issues.
One signed on to WorkApplist and review the forms and attached the file,
The file link was created but it could not be downloaded.
it could not delete.
I tested several times it occured same results.
It did not be happend when this option "share attachments and comments" was not checked.
domain log and opmn log are as below.
<2008-08-25 14:55:15,468> <ERROR> <oracle.bpel.services.workflow> <::> Identity Service Authentication failure.
Identity Service Authentication failure.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
ORABPEL-10528
Identity Service Authentication failure.
Identity Service Authentication failure.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
at oracle.tip.pc.services.identity.jazn.xml.XMLAuthenticationService.authenticateUser(XMLAuthenticationService.java:150)
at oracle.tip.pc.services.identity.jazn.xml.XMLIdentityService.authenticateUser(XMLIdentityService.java:426)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:299)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.authenticate(TaskQueryService.java:135)
at worklistapp.servlets.Login.handleRequest(Login.java:101)
at worklistapp.servlets.BaseServlet.doPost(BaseServlet.java:157)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
OAS version is 10.1.3.1.
Any advice will be appricated.
ThanksYou are getting : ORABPEL-10528
Identity Service Authentication failure.
Identity Service Authentication failure.
This means that you have wrong username/password entries in your configuration files. Please recheck them and then things should be fine...
Hope this helps!
Cheers
Anirudh Pucha -
Hi Experts,
I have a Workflow which triggers on record update.
After the start step i have 3 assignment Fields and then Some validations etc.
I can see that this workflow is stopped at First assignment step Some times with Error.
And when i Open the workflow and close it again, then the next time there is a Update to a Record this workflow works fine...
This is strange..
the Workflow entry which is in ERROR will remain the same, Even if i press 'Perform' ..
DId anyone face this issue earlier!!!
It works fine for 2 days and suddenly i can see in Workflow table there is a entry with Error at First Assignment step of Workflow.
when i Open work flow, Edit some description and save it back and the rest of the workflows from then are executing without error.
But the one with Error in WF table still remains the same even after selecting 'Perform' on it.
KR
JohnHi John,
Please find details of a SAP Note 1553992 on this issue:
Symptom
- Data Manager crashes when trying to click on workflow job line (only in MDM 5.5).
- Workflow jobs are in error state due to executing next step such as syndication step after a job was in error state due to bad assignment.
Other terms
- Workflow crash Data Manager, O28627 2011
Reason and Prerequisites
o Description of the root cause of the bug and ways to reproduce and/or diagnose the issue:
Reproducing the scenario can be done by creating a workflow with the following steps:
1. Start
2. Bad Assignment (e.g. assignment created unique constraint violation)
3. Syndication
4. Stop
After executing the workflow job, the job is shown in error state in MDM Data Manager.
Clicking on next -> Syndication step changes the workflow job to a job that only the owner can see. The job is shown in MDM Data Manager in error state, its step description is empty and no user specified in user column.
Clicking on the workflow job will lead to a crash in Data Manager.
MDM Data Manager crashes since the workflow job is is in error state but none of his steps is in error state.
In this mode(unlisted), MDS prepares the workflow list to be send to Data Manager with user name with value NULL.
Data Manager crashes when it tries to access the user name of the workflow.
The issue was introduce with MDM 5.5.
Issue is not relating to a specific platform/DBMS.
Solution
o The workaround is:
Delete workflow job in error state using Java API.
o The description of the fix is:
The fix handles two scenarios:
1. Existing workflow jobs in error state that caused a crash
in MDM Data Manager. A fix was made in MDS to add the owner as user
name to the workflow jobs in such scenario.
As a result users are able to delete the workflow job or show its
history.
2. New workflow job will not stay in Error state and the next step will
be correctly performed.
o The issue was fixed in the following code lines and versions:
- MDM 5.5 SP06 Patch05 Hotfix 45 (Build 5.5.65.125) -
change list #94328
- MDM 7.1 SP07 (Build 7.1.07.113) - change list #94340
- MDM 7.11 (Build 7.11.0.146) - change list #94339
o What areas of the code were fixed?
Workflow Run Time
o What areas of the code were affected by the fix?
Workflow Run Time
o The following component(s) need to be replaced to correct the specific flaw addressed by this note:
In 5.5 Version:
Master Data Server
MDM SERVER 5.5
In 7.1 Version:
Master Data Server
o Additional component(s), if any, that were impacted and should be regression-tested by the code change:
In 5.5 Version:
GUI Clients
JAVA API
In 7.1 Version:
Data Management Clients
JAVA API
Hope this helps.
Thanks,
Ravi -
Error in work flow wait for change event
Error in work flow wait for change event of business object bus1014, Actually this business object is triggering for two transaction one is me21n and another is c201 . am trying to create fork with two branches one is create and another if change occurs wait will trigger, bt when i trigger work flow controll is not after fork, it will stop in fork only. and am not getting my workflow container variable getting instantiate, am getting error in wait. please any one get out of me in this
Hi Sangeetha
What is LV_MATERIAL? is it a BO container element? or a class element or a just a simple variable?
Error message is clear, you are trying to evaluate LV_MATERIAL but it does not contain a value.
This is a custom workflow as it begins with WS9xxxxxxx... what is LV_MATERIAL used for? what are we expecting it to hold? maybe, from event to workflow binding we can pass the value to it.
Please share the following:
1) Definition screen shot of LV_MATERIAL
2) Screen shot of The step where it is first used - from SWDD
3) Screenshot of Event to Workflow Binding
4) name of your base Business Object (seen in the triggering events tab of the WF template in PFTC)
5) What is the corresponding variable for that BO in your workflow container
6) Screen shot of WF definition from SWDD - please identify the step going in error in that screen shot
Regards,
Modak -
Work flow template download error
Hi Folks,
I am trying to down load work flow template but its giving me this error please help me out
" No Import Filter Was Found To Import the XML
Document Chosen. Do You Want to Display the XML
Document? "
what need to be done.
Thanks in advance for the help
Krishna MukthineniHI folks ,
Any help please ..
Thanks
Krishna Mukthineni
Maybe you are looking for
-
Hi, We are using IEDriver 2.44.0 with microsoft webdriver tool Windows7-KB2990999-x64.msu update with IE11. Using IMPLEMENTATION=VENDOR, we are not able to get this IEDriver version working with out selenium based test tool, with or without microsoft
-
With Microsoft IIS7 supporting PHP. Will Adobe be looking to support PHP to MSSQL connection and application building via Dreamwaever and ADDT, as currently you can only make a PHP - MYSQL Connection and build the application that way. What would be
-
Hi, ive got 2 object, 1 object stores information about different things, the second stores a series of those object in an array list, and can also be used to create the first object - its then automatically placed in the array list. Now i need to so
-
Switch from Photoshop CC to Photoshop CC+Lightroom
Hi folks, at this time we have Creative Cloud Single-App License with Photoshop CC. Can we switch this license to the new Photoshop CC + Lightroom license?? Thanks Dominique
-
Hi Friends, I need to create customised query to see the query aveage run time and the user usage based on hour/day/week/month. I try to create in bi 7.0 but i was not able to find in the BI Content delivered queries and also when i try to create on