PCSuite Report not updating

Hi,
I have installed PCSuite 6.5 for use with a 6230i. My PC has Windows XP. I am using it to synchronise my Outlook Calendar only. Everything works fine except that the Report generated after every sync is always empty. That is - it shows zero updates even when I have updated items either on the 6230i or Outlook or both. The updates are actually happening but just don't get recorded in the report. This is not a major hassle but nonetheless I would appreciate if anyone could throw some light on this.
By the way I had tried version 6.8 but had other issues which made me revert to 6.5. Plus 6.8 doesn't seem to have the new text message facility?
Thanks,
Chris.

Hi,
I don't know anything about 6.5....
But PC Suite 6.8 includes also new text message funtionality (click Messages and then there is (blue)message button under "Phone Browser"-text.

Similar Messages

  • Parameters on linked report not updating

    Hi,
    I updated a report adding parameter expressions.  A linked report based on the report I updated didn't get the parameter expressions when I deployed the base report.  Anybody else having that issue?  It's not much of a problem.  I just have to recreate the linked report which is a nusance.
    Thanks,
    DD

    I know this question is old, but I had the same problem today, and I think the answer is useful.
    When you deploy a new "main" report, the linked reports are NOT updated automatically, so you need to refresh them. You can do this easily from the Report Manager:
    1 - Update the main report;
    2 - Go to the linked report, use the "Manage" menu, and in the "Properties" tab click in the "Change Link" button:
    3 - In the following screen, select the main report, and click "OK". This will refresh the linked report with the modified main report:
    4 - Once you're back to the previous screen, click the "Apply" button, to really update the linked report.
    5 - VERY IMPORTANT: Since you changed the main report, all the previous adjustments you made in the linked report parameters were lost - like Null, Hide, Prompt User and Display Text, only the Default Value is preserved - so GO TO THE PARAMETERS tab and
    adjust the linked report parameters again!!!

  • Current Status report not updating

    Over the past few months I have been getting more and more problems where the "Current Status" indication is wrong.  Usually I can get the "Current Status" back to being accure by going to File/Refresh.  In the past when something changed the status, like a restart taking the system off line for a few seconds, the current status would update back to Available once the remote computer completed its reboot.  Now however there is about an equal chanve that the status indicated in ARD will or will not update automatically when the status changes.  If the status remains at ARD Not Available or Sleeping or something else ARD will not control that system till I manually do a refresh and then initiate the new action.
    This is more of an irritant than a major problem but it sure would be nice if I could get ARD back to correcting and updating the indicated status correctly.  This is with the 3.5.1 ARD Admin software.  Any Ideas?

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • Report not updating after Form saved in Workspace in Hyperion Planning

    Whenever a form is changed in workspace and saved, it updates the form. I then go to the report to print, the report isn't showing the updated information. I have to go to Essbase to calcall for the report to be updated. How can I get my reports to update as soon as the form is saved. Thx

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • MBAM 2.5 Compliance Reports not updating

    After much fiddling to install MBAM distributed, I ended up with a remote SQL server and a web server with the SSRS role. The Compliance report has only one entry, my machine, yet there are several more in Recovery database. For version 1.0 and 2.0, you
    had a SQL Job called CreateCache that runs a storedProcedure. However, this is removed from version 2.5.
    How can I force the Compliace report to update with new data? Where are the logs for MBAM that enables me to see when this operation fails?

    There was a problem With the SQL database permission. I thought it worked as intended because of the Helpdesk and SelfService portal worked looking normal and working.
    Event ID 28 has not been seen yet, so not sure if this actually is a valid ID.
    For Compliance and 256-bit With Diffuser (which is removed from Windows 8) we had to deploy KB2975636 -
    https://support.microsoft.com/kb/2975636?wa=wsignin1.0#Prerequisites.
    We find the Reporting feature slow even thou we have low amount of Clients.
    All in all I still believe that MBAM is not Enterprise ready and I would suggest that other Technologies should be considered first.

  • MBAM "Enterprise Compliance Report" not updating "Last Contact" date/time for any/all systems.

    Running BitLocker/MBAM 1.0.1237.1.
    About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
    "Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
    Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
    Hoping someone has experienced this before, fixed, and can share insights.
    Thx,
    DCL

    You may want to look for communication errors under the MBAM node in Event Viewer.
    You may also want to review the registry settings discussed under the
    Configure Lab Computers for MBAM Evaluation section of this TechNet article:
    HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
    HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
    HKLM\Software\Microsoft\MBAM\NoStartupDelay
    Specifically the StatusReportingFrequency
    key.
    Brandon
    MDOP on the Springboard Series on TechNet

  • MBAM Enterprise Compliance Report not updating

    I've had MBAM going for a day or to, i can see computers in the computer compliance report if I type the test computers in; however, i dont see any computers under the
    Enterprise Compliance Report.  Is there a refresh cycle for this report and a way to get it to go quicker?  I am not seeing any computers yet and figured i should see them by now and am not sure where to look for issues for this part only.
    Thank you for any help

    I had to uninstall and reinstall MBAM and now everything works except the enterprise compliance report and when I try to run the
    clearcache job in SQL I get an error . There are no steps defined in the clearcache job , its just empty
    How can I fix this clearcache job?
    thx
    I have the same problem. Could anyone show us the steps so we can recreate it?
    Update on the problem,
    I found another forum post about the same problem and how to recreate it, But I couldnt get it to work. Please try it and see if it works for you.
    http://social.technet.microsoft.com/Forums/da-DK/w7itprosecurity/thread/d481451c-1acd-4722-a53b-6b5632975a87
     "run selection in the reportingdb.sql"

  • "Cost Rollup - No Report" not updating costs for some items.

    Hi ,
    We have an issue with "Cost Rollup - No Report" program. When it is run for all items in an Organization, some item costs were not getting updated.
    "Include in Cost Rollup" flag in Master Item form and in Item Costs form is enabled for these items. When we run the report for specific item , it is working fine, cost
    is getting updated. Only when we run the report for all items of an org, we are having this issue. Any suggestion or help in this regard is highly appreciated.
    Thanks in advance,
    Pavan.

    Hi,
    I mean B(Sub Assembly)
    Item Rollup Flag
    A No
    --B                       Yes
    ---B1 No
    ---B2 No
    ---B3 No
    --C                      Yes
    In this case when we run cost rollup by giving item A, Oracle will consider below structure.
    A
    --C
    Regards,
    Sarvottam.

  • RE:Transaction usage report not updating.

    Hi All,
    I am on 5.2 SP9 and I am facing an issue wherein the transaction usage report is not getting updated by the lateast report. To illustrate, I created a role with transaction PFCG and assigned it to a user. Now, when the user executes the PFCG, the report should be updated and it should show that this user also executed PFCG today, which isn't the case.
    Would like to know if anyone has a clue how to resolve the same. As in, did i miss out on anything which needs to configured/done before running this report.
    Thanks a tonne in advance.
    Regards,
    Hersh.

    Hello Joy,
    Thanks for your reply but the transaction usage reports I am mentioning here are actuallyu the transaction usage reports for "Role Expert" not for "FireFighter".
    Regards,
    Hersh.

  • Reports Not Updating?

    Using RoboHelp 6 and Server 6.
    If I enter a word to Search for and the result isn't found
    and then
    I go to the Report section and look at Unanswered Questions,
    that word isn't showing up (I have clicked on Update).
    Even Frequently Asked Questions is coming up empty.
    I do see the message that says its updating, but no results.
    I have noticed that the reports stopped recording any data
    after 10/25/07 by using the Custom option.
    Any ideas on what's wrong?
    Thanks
    Doug

    Hi,
    If you are tyring to view the KSB1 report after creating the PO, it will not be possible because the PO creation does not create any accounting documents and only the account assignments are done here.
    After you do the GR only, the accounting documents gets created and if you do the KSB1 reporting you will able to see the amounts posted on that particular cost center for that PO.
    Thanks and Regards,
    Bhuvaneswari.S

  • AGEING REPORT NOT UPDATING

    After made partly payment to an invoice of vendor, and proecessed it in the outgoing payment, why the ageing report does not reflect the balance of the that particular invoice, instead of showing the original amount and the payment, which makes the ageing report very long and confused. How can I solve this problem? thanks.

    There is no problem with AP balance. After payment made, it is reduced. The only one that remain unchanged is doc status. it is still open since the payment is partial. I suggest to cancel the payment and then repaying again. If problem still persists it will be bugs in the PL you are currently using.
    Rgds,

  • SCSM - Reports not updated

    hi,
    we have a new installation of SCSM 2012 server,  the SQl server is separate on a cluster
    my SCSM 2012 reports show only data prior to 09-01-2015. records prior to that are shown in all reports.
    how can I troubleshoot this ?   any help would be appreciated :( 
    regards
    ZUF

    Sounds like problem with the data warehouse. 
    1. Look at the data warehouse jobs and see if they are in a failed status
    2. Look at the operation managers logs on the data warehouse management server and see if you can find any errors there. 
    Cheers,
    Thomas Strömberg
    System Center Specialist
    Blog:  
    Twitter:   LinkedIn:
    Please remember to 'Propose as answer' if you find a reply helpful

  • Form with report, update field in the form = field is not updated in table

    Hi,
    I have a form with report. On Primary Key in the report is a link to the form. I select one row in the form by choosing the link in the report. Then I update a field in the form and press "Save". I see the success message "Action processed" and I'll be back in the report. I see the field in the report with it's old content. It is not updated. I don't understand why. Can anybody help me?
    Thanks Daniela

    Daniela,
    Is the form field source set to the proper database column? It's either not properly defined or your Save button and the builtin update process have somehow become disconnected. Check to make sure that the Save button is set to perform an Update in the database operations setting.
    Earl

  • Data Migration Opening Balances are not updating in the Report F.08

    Hi,
    We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
    Why they are not updating in the report. In which table can i check the Data migration values in the system?
    Thansk
    Kishore

    Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
    F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
    Why it is showing like that?
    Thansk
    kishore

  • Reports are not updated on the dashboard

    Hello guys
    I have created some reports and dashboards in OBIEE. Everything looks good. The only problem is that they are not updated with new data as the days go by.
    In other words, the next day and the day after when users log in to view the same report, they are still seeing the same old data where it should be updated already when new data were already loaded into the db. When clicking on refresh botton, it still didn't update..
    I believe there must be some caching issues that causes it, but cache is needed as a part of performance tuning. So how would I be able to update the record and not slowing the performance for reports that are updating daily?
    Please help

    Hi,
    This certainly sounds like a caching issue, you need to decide on a method for purging the cache of stale entries. My personal favourite is a custom informatica WF added as a following task to the DAC execution plan. This WF calls as OBDC function against the Analytics ODBC which purges the cache, ensuring that there are no stale entries after the ETL has finished.
    For more info on caching please see my blog entry here:
    [http://obiee-tips.blogspot.com/2009/09/obiee-query-caching.html|http://obiee-tips.blogspot.com/2009/09/obiee-query-caching.html]
    Regards,
    Matt

Maybe you are looking for