PCUI: Automatically open a BP in change/create mode

Hello all,
From a custom i-view in the portal with some name and address fields, i would like to call accounts(business partner) change (if an account exists) or call account creation, automatically filling in some fields from my custom i-view.
So the question is:
- Can i automatically open account maintenance for a certain account, via an url call or something?
Is there anyone who knows how to realize this?
Kind regards,
Martijn de Jong.

Hello Gregor,
It just works partly. As a testcase, i linked the url to a custom tabpage which i added to the BP. This results in showing the portal content studio, which is the start page of the portal, but within the new tabpage.
So the link opens the portal, but doesn't goto the application.
The created link (without the base url):
/roles/com.sap.pct.crm.SalesManager/AccountsProducts/nf/nf_2/
MaintainAccounts?SAP_QueryString=
CRM_OBJECT_TYPE%3dACCOUNTCRM
%26CRM_BOR_TYPE%3dBUS1006
%26CRM_OBJECT_ID%3d300000
%26CRM_LOGSYS%3dCROCLNT010
%26sap-syscmd%3dnocookie
&~logical_system=CROCLNT010
&~object_type=BUS1006
&~object_key=300000
Some more suggestions?
Regards,
Martijn.
Message was edited by: M. de Jong
Message was edited by: M. de Jong

Similar Messages

  • Movie that will automatically open in "fit to screen" view mode?

    I'm wondering if it's possible to save a video in quicktime pro that will, when opened in any normal version of quicktime, automatically open in the "fit to screen" view option. In the visual settings tab of the movie properties, there is an option to automatically open into full screen, but this isn't what I want - I want it to open in the normal (non-fullscreen) quicktime window, but to automatically resize to fit the screen size of the computer it's being viewed on.
    I'm pretty sure that there isn't any easy way to do this, but it's pretty important, so if it requires some scripting or something, that's fine - i'm not a programmer, but i'm willing to do whatever i need to, to make this work.
    Thanks!

    The "Presentation" option is a bit confusing as there are "user" settings that each viewer could have set (double size, Fit To Screen, etc) in the QuickTime preferences and all of them will play with the "on screen" controls feature of version 7. So "full screen" is different because of the dozens of display settings that may be used and the same for "fit to screen".
    If you set the file dimensions too large for a small display setting the viewer will not be able to use the QuickTime controller (it could be "off screen).
    I just checked all my AppleScripts and Automator actions and none include "fit to screen" options. No luck there.
    If you set the movie dimensions (Visual Settings) to the "fit screen" size this would work on your display but maybe not on mine. To do that just open the Movie Info window with your file set to fit screen dimensions, note the size and adjust the file dimensions to those new values and "Save As".
    Easiest method for your workflow would be to send instructions for viewing to the end users.
    Keyboard shortcuts for QuickTime file display:
    Command-0 (zero) = half size
    Command-1 = normal size
    Command-2 = double size
    Command-3 = fit to screen
    Command-F = full screen (presentation mode)

  • How to stop Acrobat from automatically opening created PDF?

    This may be a question asked elsewhere, but my search didn't find it.
    How can I stop Acrobat from automatically opening every PDF that I create in Adobe Reader?  I'm using using Acrobat 6.0 Pro.
    Thanks for your help with this major annoyance!
    Cheers.

    Adobe does not recommend Reader and Acrobat both be installed. They have strange interactions and can cause problems. If you do not have problems, you are lucky. Part of the problem is that they leave a part resident to enable quick opening. If it works for you, then fine. If you have some problems, you at least have an idea of what a prime candidate is for the error.

  • Automatic opening of PDF by Reader

    How do I proceed if I don't want Adobe Reader (but another application) to automatically open all PDF documents?

    Thanks.
    Le 2013-01-10 à 04:52, Ankit_Jain <[email protected]> a écrit :
    Re: Automatic opening of PDF by Reader
    created by Ankit_Jain in Adobe Reader - View the full discussion
    You can right click on any PDF document and click on the "Open With > Chose Program" option. In the dialog that appears, select the application that you want to associate with opening the PDFs and ensure to check the checkbox at the bottom of the dialog that states something like "Always use the selected program to open this kind of file". Clicking on OK would change the PDF ownership to the new applciation.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4982730#4982730
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4982730#4982730
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4982730#4982730. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Reader by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Have Operating System 10.6.8, Mail Program 4.6.  How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to m

    Have Operating System 10.6.8, Mail Program 4.6.
    How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
    Help

    Have Operating System 10.6.8, Mail Program 4.6.
    How can I prevent the next email in the que from automatically opening after I act on the previous email ? It creates big organizational problems for me. My computer changes this mode from self opening to manually opening every few month with no ? action from me.
    Help

  • Created Folders in portal favorites iView automaticly open

    Hi,                                                                    
    if we create new folders in the iView portal favorites, the folders are automaticly open! Does anybody know how to change that, so that the folders are closed, when we open the iView? I tried to change the Layout Set "portalfavoritesexplorer", but I didn't get forward!
    Regards,
    Andy

    Hello,
    Check in the properties of your Favorites iview, that the parameter "Layout Set" is set to "PortalFavoritesExplorer" and the parameter "Layout Set Mode" is set to "force".
    Now change the PortalFavoritesCollectionRenderer parameter Initial displayed tree level = 1.
    Refresh your browser and login again.  You should see the changes take effect.
    Regards,
    Sumner

  • When connected via USB, my Ipod Classic 160GB mounts as a disc drive, then changes to a white drive.  When iTunes automatically opens, it crashes trying to mount and/ or sync.  When it times out, my only choice is to restore, but that doesn't fix problem.

    I'm running OS 10.6.8 on my 3.06 GHz iMac Intel Core 2 Duo.   I recently upgraded to iTunes 10.5.2.  I'm not sure when the trouble started but I attempted a restore when the iPod would not play correctly.  It would start to play a file and get stuck on 0 seconds.  If I put the iPod on shufle, it will stall on 0 seconds for 15 seconds or so and then move on to the next track and stall again and so on.   Seemingly randomly, it will play a few tracks but eventually start skipping again.  This will continue until the battery is depleted which is fairly quick since the drive is constantly spinning.
    My 160GB iPod Classic after restore attempts now is up to date with 2.0.4. and of course, nothing works as it should and I would say the skipping issue is worse than ever.  
    When I connect with any of three USB connectors, the iPod mounts to the desktop as a grey/silver disk drive picon exactly like the Macintosh HD picon.   Then Finder will stall for a few minutes- spinning pinwheel.  Somehow, the dock is never affected and I am able to open other applications like Safari or tab through open windows- just no action on the desktop.  Eventually, iTunes automatically opens and Finder becomes responsive again.  At this point the grey drive picon on the desktop becomes a white drive mount picon, but the iPod does not mount in iTunes, yet.  At some point, the iPod attempts to sync, iTunes crashes with the spinning pinwheel and eventually times out and I am prompted to restore the iPod again.  Once restored,  the iPod properly mounts under devices in iTunes and, as I have done this several times, even occasionally changes to the regular iPod picon on the desktop.
    I have restored several times going as far a completely deleting iTunes from my iMac, downloading the latest directly from Apple.com, and attempting to restore again, but to no avail.
    I have even used the disk utility to verify and/or repair my Macintosh HD and iPod. 
    It seems lots of folks are going through this ordeal.  Has anyone had any success in fixing the issue, even if only temporarily?

    one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file.  Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing  even though I have the auto sync feature turned off.
    This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer.   Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar.     Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
    Then if I try and play the music I just transfered, the iPod says there is no music loaded.
    Ideas?

  • I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

    I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

    You can associate files from the Bridge level and the Desktop level.
    In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
    If you want to open files from the Windows Desktop in CS4, these are the instructions:
    Do this from the Windows Desktop:
    If you want your image file to open in Photoshop and it doesn't, right click on it and choose
    Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

  • Is there a way to create a button on the front panel that would automatically open the txt file data is being stored to?

    I am saving data read from FieldPoint to a .txt file. Is there a way to create a button on the front panel so that when the user pushes this button it automatically opens the .txt folder in notepad? I want to bypass the user having to find the file in the computer in order to open it.

    Hi jem,
    I suggest that you break this up into three seperate questions and re-post to this list. That way you get more ideas from others that may have better insites than myself.
    Re:the sysexec
    The Sysexec will allow you to execute a dos command. This is the equivalent of going to
    Start>>>Run
    What you should do is find the proper DOS command sysntax that is required to open a text file in notepad or your favorite editor. Once you know what a good DOS command is, you should pass that string to the Sysexec.VI. The Sysexec has an input that allows you to choose if the code waits for the command to complete or if it should just start the program and let it run in the background. Sysexec will open its own window to run the command you speci
    fiy.
    Ben
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • When I click on a hyperlink it automatically opens it up in a PDF or in Adobe Acrobat Reader. How do I change my settings back to normal so when I click on the link it opens it up in a new web page?

    When I click on a hyperlink it automatically opens it up in a PDF or Adobe Acrobat. How do I change my settings so that when I click on a link it opens it up in a new web page like it is supposed to?

    Install this Add-on: https://addons.mozilla.org/en-US/firefox/addon/open-link-in-new-tab/

  • I've bought a student plan but every time I open currently downloaded programms I see an automatically opened window that says I'm using trial version and still have several days to use it. How can I change it?

    I've bought a student plan but every time I open currently downloaded programms I see an automatically opened window that says I'm using trial version and still have several days to use it. How can I change it? It makes me nervous , as it demands serial number, but e-mail i've got from Adobe doesn't contain any serial number or invitation or something like that.

    Vetscheriascha to validate the software you will want to resolve the connection error between the computer and our activation server.  Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error.

  • When I click a link on a webpage to send the webpage an e-mail, a blank e-mail automatically opens in mail. I use Outlook. Where do I change the default to automatically open to an Outlook email?

    When I click a link on a webpage to send the webpage an e-mail, a blank e-mail automatically opens in Mac mail. I use Outlook. Where do I change the default to automatically open to an Outlook email (if such a thing exists?).
    I have a MacBook Air, running OS X 10.8.5.
    Thanks

    Mail>Preferences>General>Default email Reader:

  • Automator Help: Create simple workflow to automate opening random playlist?

    I'm fairly inexperienced with Automator. I've figured out how to create some workflows by having it record my actions but this is somewhat limiting. I'm hoping to accomplish something slightly more complex and I've been unable to find an existing thread on this (I may be searching for the wrong terms).
    I'm hoping someone here can help me to create an Automator workflow that will:
    1.) At a specific time on a specific day of the week (i.e. every Wednesday at 4pm)
    2.) Open a randomly selected file from a specified folder (i.e. go to folder "Playlists" and pick one of the 15 .m3u playlists available at random and open it).
    Is this possible with Automator? I've read other posts that seem to suggest something like this is possible but I'm having trouble finding the right building blocks in Automator to make it happen. I'm hoping it's fairly simple because I certainly don't want to ask too much of anyone here. Any help would be greatly appreciated but please don't go out of your way if this is a complex or demanding request.
    My goal is to create a virtual TV channel of sorts. I'd create specialized playlists (i.e. Wednesdays might be sitcom night whereas Thursdays are Sci-Fi night) and my Mac Mini would automatically open one of the multiple "sitcom" playlists (at random) every Wednesday just before I would get home. I love my Mac Mini and Front Row (and Boxee as of late) but sometimes I would like for my computer to be automated so it feels more like a regular TV channel (but one with programming I'm guaranteed to like).
    Thanks everyone. I really appreciate your time and input.

    Do you want to randomly select the playlists, or the items within a particular playlist, or both? Making an iCal alarm plug-in with something like the following will play a random item in the specified playlist:
    1) Get Specified iTunes Items {add your playlist}
    2) Play iTunes Playlist {select shuffle}

  • When I i open a picture from my Documents it automatically opens in Photoshop.  I want it to open in Lightroom. How do I change this preference?

    When I i open a picture from my Documents it automatically opens in Photoshop.  I want it to open in Lightroom. How do I change this preference?

    You cannot open an image with LR as you would with Photoshop , or Elements. (or a word document, etc)
    The Lightroom program can only open "Catalog" files  (*.LRCAT)   Opening a .LRCAT file will automatically open Lightroom.
    To edit images in LR you must first open the program, then IMPORT the image into the Catalog database (only ever once), then you select the preview thumbnail and go to the Develop module ( press "D")
    Your edits in the Develop module will show on the preview in the library grid.
    Your original image file is not altered, so will not look any different in File Explorer or Finder.
    To get an image file with your Develop edits applied, you must "Export" a derivative file in JPG or TIFF format.

  • My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve

    My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve
    Any one can help me

    Thank you for your response - I'll give it a go.
    Also, just to update, my iMac cursor seems to glitch a little bit less now. It seems that at least ONE of my problems may have been caused by sitting my iPhone upon my WACOM tablet. The tablet must receive some sort of disruption from having my phone on it - and removing it seems to remedy a fraction of my mouse-jumping problems - if only for a meanwhile.
    The mouse cursor still does jump around on its own occasionally, and the other mouse problems do persist - so this must not be the only culprit for my array of problems.

Maybe you are looking for