PCUI- Need both List and Form under one tab

Dear All,
I have a requirement where i need to show 'LIST' and 'FORM' views of the data at the same time under one of the tab on Business Partner screen details.
In general when the field are added to the list, user has an option to change LIST view to the FORM view or vice versa, but in this requirement the data should be available in both form at the same time.
Need the help urgently.
Regards,
D. Chakrapani.

Hi,
Can you be please more specific with what exactly is the requirement? Do you want to show the Data under a particular in both List and Form view simaltaneously?
Well for starters you can try the following:
1. Lets say the event you want to display is 'X'
2. For displaying data in the list view, in the Detail Area 1, maintain entries for 'X' event with the requisite field groups and screen element type as 'LIST' in your application layout table
3. For displaying data in the form view, you can use Detail Area 2, maintain entries for 'X' event with the requisite field groups and screen element type as 'FORM' in your application layout table
Let me know in case you need more clarifications

Similar Messages

  • What are smart mailboxes and why do i need both smart and "normal" ones?

    What are smart mailboxes and why do I need both smart and "normal" mailboxes?

    Hi Kingoftypos,
    Thanks for that clarification. So, now it appears that the ultimate purpose of a Smart Mailbox is to point to all emails that meet the criteria in a single place, so if they are spread among several mailboxes, you will be able to see them all together. Here is an article from Apple that describes it:
    A Smart Mailbox displays in one location messages that are stored in other mailboxes, so you don’t have to move messages between mailboxes. The messages displayed by a Smart Mailbox are based on criteria you define, and are automatically updated to include new messages that match your criteria. For example, you might create a Smart Mailbox that displays all messages found in all mailboxes from a specific sender.
    If you change a message in a Smart Mailbox, such as marking the message as read or unread, or moving or deleting the message, the change is reflected in the mailbox where the message is actually stored.
    So, adam, I would think that, if you had mail going to a lot of different places, and wanted to be able to see a particular set of those in a single place, you would use a smart mailbox. Maybe use the rules to direct your mail to different places to start with, but a smart mailbox to bring a set of common ones all together into a single smart mailbox?
    Maybe you have Rules move your Amazon mail to an Amazon folder and your Apple mail to an Apple folder, but then you have a Smart Mailbox that contains any mail that has the word "Receipt" in the Subject line?
    Just a thought....
    Cheers,
    GB

  • I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?

    I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?
    This is due to the different changes Adobe has gone through and unfortunately I used different emails at certain times.

    Under one Adobe ID you can have one CC only,if by accident you have purchased two CC under one account, it needs to be cancelled & refunded, please contact Adobe Support at
    http://adobe.ly/yxj0t6
    Regards
    Rajshree

  • I installed dreamweaver on Windows. After installing it, it blocks my  access to the internet. Solution? I discarded it and it was okay, but I need both dreamweaver and internet acces.

    I installed dreamweaver on Windows. After installing it, it blocks my  access to the internet. Solution? I discarded it and it was okay, but I need both dreamweaver and internet acces.

    See iPhone DFU mode explained, and how to enter DFU mode.

  • Load both datastore and cube with one DTP

    Was any one succesful in loading data to both datastore and cube with one single DTP .

    You can only have one Target in a DTP.
    HD

  • How to edit data using a LOV list AND textfield for one Field

    I am trying to edit the templated edit from HTMLDB template when I create a new table. I implemented most of the fields with LOV list like yes/no, joe/bob/john etc. But some fields as many probably have seen have a LOV called "Other" where a person types a different value than the ones available. Can someone tell me how I can accomplish that? Do I need to insert "Other" into LOV and have it be set as the value in the textfield? I am not sure how i can create both LOV list and textfield per category/field i.e. Name.
    Thanks

    Again, I urge you to use HTML DB nomenclature to describe what you've done. For example: "I ran the Form on a Table wizard to create a form" Rather than using the word "template" for everything you describe. "Template" has a specific meaning in HTML DB and it is not what you are referring to.
    You really should invest the time required to accurately phrase your problem. Just like answering questions on this forum requires time, so does formulating your question. It is time well spent and it is effort on your part that the experts on this forum deserve. If you don't put in this effort and instead just post a stream of consciousness, that means the readers of this forum will gloss over your question and ignore it. As a result, you have to ask the question again...and again.
    Having said that, if I understand your question correctly, you should use a popup LOV item. This will allow the user to select from a list but will also allow typing of a non existent option into a text field.
    Sergio

  • Can I have mulitple iCloud Contact lists and calendars on one account?

    We have 3 iphones in the family.  I'd like to use one iCloud account for our iTunes library, but each of us needs to maintain our own calendars and contact lists.  Can I have separate calendars and contacts under the same iCloud account?

    Here's an article that may be of interest:
    http://appadvice.com/appnn/2011/10/how-to-use-icloud-in-a-family-setting-share-a pps-but-not-contacts
    Matt

  • Is there a 64-bit gdb for Solaris (I need both x86 and Sparc)

    I'm looking for publicly available versions of gdb for both SPARC and Intel. I'm the current
    developer of the NetBeans gdb module and we've had bugs filed that our Solaris users
    can't debug 64-bit applications.
    I've built a 64-bit gdb but its trying to dynamicly load a 32-bit .so (libexpat.so.0). I can still
    run it by setting LD_LIBRARY_PATH, but can't figure out how to configure my gdb build
    to use the right libexpat. Even if I could, I need something like the companion CD or
    sunfreeware.com to provide (I'd even settle for gdb.gnu.org:-)
    If anyone knows of publicly available versions, please email me.
    Thanks,
    Gordon

    Again, I think you need to check the Microsoft web page, as I was able to find 64 bit versions of IE8 for download.
    The URL to access the page is
    http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8
    From that page, I am able to select a 64 bit version of IE 8 for the following Operating Systems
      -- Windows XP 64 Bit
      -- Windows Vista 64 Bit
      -- Windows Server 2003 64 Bit
      -- Windows Server 2008 64 Bit
    Windows 7 is not listed as an option as it already comes with IE8 installed by default.
    Looks to me that Microsoft has already released a 64 bit version of IE8.
    In fact, I went ahead and downloaded IE8 for Windows 2003 Server x64 bit, and looked at the details of the file.  Each microsoft download has a digital signature associated with them, showing a date and time of when the exe was built.
    According to what is shown below, IE8 for Windows Server 2003 has been around since Sunday, March 08, 2009.
    So, what has adobe been doing since March of 2009?  IE8 has been 64 bit for well over 2 years now (it will be 3 in March of 2012). While I know that it does take time to develop new applications, I don't think it would take 3 years for Adobe to come up with a 64 bit version of Reader that could have been built under the 64 bit platform.
    --Brian

  • Mixing Jdeveloper and Forms under 9iAS

    Hi,
    We are currently migrating older versions of Forms applications to release 9i to run on a Solaris 8 platform using Oracle 9ias version 9.0.2.0.1.
    We have also developed new applications with JDeveloper 9.0.3 which will be deployed to the same platform. As I understand it I need to upgrade the Application Server to use Release 2 (9.0.3) in order to install the correct containers to run the latest version of JDeveloper. However, it appears that this may have an impact on the Forms services.
    Could someone please advise if it is possible to combine both Forms9i and JDeveloper903 applications on the same platform running under Oracle9iAS.
    Thanks,
    Chris

    I think you might get a better answer for this in the Oracle9iAS forums since the real question here is can you install Oracle9iAS v2 (9.0.2) and then replace the OC4J with OC4J 9.0.3
    In any case the next version of Oracle9iAS is supposed to have everything pre configuredfor the latest release which will be 9.0.4

  • Use both iPhoto and Aperture with one library-best practice?

    I'd like to use both iPhoto and Aperture, but have both programs use/update just one photo library.  I have the latest versions of both programs, but was wondering if the optimum approach would be to:
    a)point Aperture to the existing iPhoto library and use that as the library for both programs
    or
    b)import the entire iPhoto library into a new Aperture library, delete the iPhoto library, and point iPhoto to use the Aperture library.
    I should point out that up to now I've been using iPhoto exclusively, and have close to 20K photos in the iPhoto library, tagged with Faces, organized into various albums, etc; if that makes a difference...
    Appreciate any advice!
    Thanks,
    Dave

    Thanks Frank!  I'll try it that way.
    Appreciate the help!

  • I have to Apple ids in email format--how can I change this to just one and merge all of my existing purchases and apps under one ID?

    I have two apple id's in email format--how can i change this to just one and merge all of my apps and tunes under the one retained ID?

    Sorry Duane..
    Apple does not support the merging of accounts >   Frequently Asked Questions About Apple ID
    messaged edited by cs

  • Grey out rate and currency under conditions tab in PO

    Hi Expert,
    Is it possible to grey out the "rate" and "currency" field under Conditions tab in Purchase Order? If can, please guide me to the path.
    Thanks.

    Hello, crystal142,
    SPRO -> Materials Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document Level -> (choose the field selection, can be assigned to document type in Purchase Order -> Define Document Types) -> Terms of delivery and payment.
    Kind Regards
    TomT

  • Possible to incorporate both music and videos on one play list??

    I tried, unsuccessfully, to add a music video onto a playlist that has just music on it. Is this possible? The ipod seems to immediately set up a new playlist, with the same name as the existing one, and put the video onto the new one...which means shifting back and forth in order to play and hear both...Thanks!

    No not possible.

  • How do I add a time field to a dynamic list and form?

    I'm trying to create an update form that logs when an action was taken. Among the fields are one for the date and one for the time, but I've not been able to get the time field to display or enter data correctly.
    I've set the time format in the ADDT preferences (database date and time format is yyyy-mm-dd and HH:mm:ss and screen format is dd/mm/yyyy and HH:mm). When I create the list or the form using the wizard, there is no option to display the field as a time.
    In step 3 of 4 in the Dynamic List Wizard, the 'Display as' options are: text, numeric, double and date. Choosing date for the time field gives me a display as though it was a date (I get '00/00/0000'). I have the same problem with generating a Dynamic Form in that there is no option to display a time, only a date.
    Am I able to do this using the wizard, or is there another way that I'm, missing? Thanks for any help.

    If those date/time fields are only needed for logging purposes then follow Günter's instructions.
    If you need to be able to edit those two fields and have their values displayed properly then there are several steps you should take.
    First open the page that uses the Dynamic List behavior and make sure that all date and time fields are configured to display as dates. Then open the page with the dynamic form and click on "Manage Dynamic Form Wizard" in the Developer Toolbox. Configure your date and time fields to submit as dates. Then go to the Server Behaviors panel and double click on "Validate Form". You should now have 3 date/time options available under Validation Format: Date, Datetime, and Time. Configure each field as needed.
    This will ensure that date and time fields are saved in the proper format so that when you view their values they will be displayed properly, that is dates will be displayed as dates and times as times.
    There are also several additional server formats available that are accessible through the Bindings panel that you might want to experiment with.

  • Need  Standard Script and forms

    Hi experts ,
    Can u plz list out me some of the standard SAP Script and SAP smartforms ...
    And also what r all the customizing jobs that can be done ( in real time scenario ) with respect to SAP script and SAP smart forms...
    with regards,
    James..
    valuable answer will be rewarded...

    Hi
    Below is the Diffrance bet SMARTFORMS and SAP SCRIPT.
    The Following are the differences :-
          a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
           b) It is possible to have a smartform without a main window .
           c) Labels cannot be created in smartforms.
           d) Routines can be written in smartforms tool.
           e) Smartforms generates a function module when activated.
    f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
    It was said that it was provided in CRM 3.0 version, but not available in R/3.  You can download smartforms into Local PC in a XML format.  In the same way you can upload this XML format into Smartform.  From the smartform editor itself you can call download option, if you are working in CRM 3.0 environment.
    In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
    In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
    For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people.  What you can do is to create a Transport and then FTP down to your local harddisk.   When you need the Smartform source in another system, you have FTP up the Smartforms file back to the SAP server.  Finally, the Basis team, will tp it into your system.
    g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it.  Actually, there is something you can do about it.  By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected. 
    More on SAP SCRIPT
    Don't forget to reward points.
    Reg,
    Hiren Patel

Maybe you are looking for

  • How to edit Account with Web Link?

    We created web link on new record type to edit existing account by passing account name in the following url, http://secure-ausomxcsa.crmondemand.com/OnDemand/user/AccountEdit?OMTGT=AccountEditForm&OMTHD=AccountEditNav&OCTYPE=&AccountEditForm.Name=%%

  • DIR creation from routing

    Hello All, I have a requirement to generate a document in SAP DMS (CV01N) for the assembly instruction using the process steps from routing(CA01).This would include inserting an assembly picture (JPEG) into original file which would reside in DMS and

  • Google and Youtube not accessible intermittently from FiOS internet

    Ever since the beginning of 2015, I have the problem accessing Google and Youtube. This happens intermittently and it now happens almost everyday. While I can't access Google and Youtube, every other website works fine. And I know it is not Google an

  • Low Disk Space Issue

    One of our ZCM servers has a low disk space and looks like most of it is being taken up by folders with package.cab files. The folder location is: C:\Windows\SoftwareDistribution\ScanFile This folder is taking about 10GB and I'm not exactly sure what

  • STO - INTRA METHOD

    Dear All, Is my below concept correct: INTRA(STO) : Movement of material physically from plant to plant with in the same company code. No billing would be generated because it's with in the same company code. We can create a PO in ME21N from plant to