PD [APPRAISALS AND REMUNERATION ADJUSTMENT]

I HAVE CREATED AN APPRAISAL CATALOGUE AND ALSO MADE THE REQUIRED SETTINGS SO AS TO CARRY OUT APPRAISALS FOR INDIVIDUAL BY SUPERVISOR. I HAVE ALSO ASSIGNED 'ADJUST REMUNERATION' IN THE PROCESSING TAB OF "CHANGE APPRAISAL MODEL" DIALOG BOX. PLEASE HELP ME TO CREATE A SYSTEM WHERE THE REMUNERATION STRUCTURE OF THE EMPLOYEE CAN BE CHANGED AS PER THE SCORE OF THE APPRAISAL.
ALSO, WHERE CAN I GET INFO ABOUT THE BASICS OF CAREER PLANNING AND SUCCESSION PLANNING.
PLEASE DO REPLY.
THANKS AND REGARDS

Hi Axe,
Check it in Tcode: PPCP for career planning and PPSP for sucession planning.
Note: Reward points if usefull.
Regards
Saplok

Similar Messages

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Change page size and cant adjust pagecolor to same size

In pages I selecte a standard sjablone and I adjusted the papersize from A4 to A3. In the standardform there was a paper color and I liked it but I want to resize it to the new size.
How can I do this?
Thanks!

Well I am having this exact issue.
I have seen many posts in other areas of this discussion and online elsewhere. As it goes, Adobe is going to get sued for this.
I paid for a working feature of the software in CS6. Simply releasing a new version and forcing the user to pay for a fix to a problem in an old version is not lawful business. It's extorsion. They did not uphold their end of the bargain on the contract of me paying for a working product.
The owness is on them now to fix the bugs in the current versions of broken software.

Vignetting added and color adjusted immediately post import into Lightroom5.

Vignetting added and color adjusted immediately post import into lightroom5.
My photos from my most recent trip, when imported into Lightroom, have a heavy vignette very close to all 4 corners of the photo, and seem to have some small adjustments being done to them immediately when I import. The thumbnail looks great, and when i import --> then select it to open it as if I was going to view it full size in Lightroom, it looks great [no vignetting or tone/color adjustment] for about 1-2 seconds while a 'loading' footer is shown, following which the color is slightly altered and the vignetting is added (at this point then the thumbnail changes as well). This is a significant and noticable change to the photo. The pictures also do not have these issues if I view them through any other software. I have Can any one help me figure out what is causing this and remove it?
I shoot
with a Sony Alpha6000
shoot in RAW (.ARW)
use the standard sony kit lens that comes with the camera bundle, lens SELP1650 (3.5-5.6/16mm-50mm)
edit on Windows 7 64bit with Lightroom5
and don't believe I've adjusted any camera settings since last taking pictures 1 week ago with the exact same lens. I looked at photos from my last trip (only one week ago), and none of them are having these or an alterations/changes upon import.
I took over 300 photos last weekend wthout any sign of these issues post import
Every single photo I took this weekend seems to have this same issue.
Any help is appreciated!

Vignetting added and color adjusted immediately post import into lightroom5.
My photos from my most recent trip, when imported into Lightroom, have a heavy vignette very close to all 4 corners of the photo, and seem to have some small adjustments being done to them immediately when I import. The thumbnail looks great, and when i import --> then select it to open it as if I was going to view it full size in Lightroom, it looks great [no vignetting or tone/color adjustment] for about 1-2 seconds while a 'loading' footer is shown, following which the color is slightly altered and the vignetting is added (at this point then the thumbnail changes as well). This is a significant and noticable change to the photo. The pictures also do not have these issues if I view them through any other software. I have Can any one help me figure out what is causing this and remove it?
I shoot
with a Sony Alpha6000
shoot in RAW (.ARW)
use the standard sony kit lens that comes with the camera bundle, lens SELP1650 (3.5-5.6/16mm-50mm)
edit on Windows 7 64bit with Lightroom5
and don't believe I've adjusted any camera settings since last taking pictures 1 week ago with the exact same lens. I looked at photos from my last trip (only one week ago), and none of them are having these or an alterations/changes upon import.
I took over 300 photos last weekend wthout any sign of these issues post import
Every single photo I took this weekend seems to have this same issue.
Any help is appreciated!

Spot Healing Brush needs 'Current and Below' and 'Ignore Adjustment Layers'

Spot Healing Brush needs 'Current and Below' and 'Ignore Adjustment Layers'

Spot Healing Brush needs 'Current and Below' and 'Ignore Adjustment Layers'

Highlights and Shadows Adjustment Panel

Hi
Since upgrading to 3.3.1 yesterday, I have lost the Advanced segment of the Highlights and Shadows adjustment panel.
It will show up on photos which had been previously edited using this segment, but not on photos which have not been edited.
Photos are on an external drive.
Any fixes?

See Kirby Krieger's Thread:
How to not miss that olde-tyme Highlights & Shadows 7-slider Brick
Basically you use an image, that still has the Version 3.2 Highlights & Shadows adjustments and create an adjustment preset (effect) from this image. Then you can use the advanced controls again for all images.
Regards
Léonie

Upload pictures and retain adjusted photo date

After scanning a number of old photos, I upload them onto my MAC PC and I adjusted the photo date and time via the batch change function. I then exported the photos from iPhoto and transferred them onto another Mac PC and upload them into iPhoto on that PC. The photos did not retain the modified date on the upload, but rather show the date on which they were scanned.
Is there any way to transfer photos between iPhoto libraries (on different PCs) and maintain the adjusted date and time of the photo?

Unfortunately no.
This data is recorded in the Exif metadata that is created when a Camera takes a photo. However, scanners so not create Exif and so there is nowhere for this data to be written to. Therefore, applications that can't access the Exif use the Date Created info from the file.
You may be able to change the Date Created info on the File using an app like
http://www.publicspace.net/ABetterFinderAttributes/
but beware: don't run this in files already in iPhoto, only before importing or after export.
Regards
TD

I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?

I have made a blog in adobe muse and now adjusting it on BC but I can't seem to change the blog post date format?
My ideal date format would be / 28, Oct, 2015
can anyone help? I'm not sure I can manipulate the {tag_postdate}

You can use something like this in the post or post list: {tag_blogpostday}, {tag_blogpostmonth}, {tag_blogpostyear}

Lost the HSL and colour Adjustment tool bar

I seem to have lost the HSL and Colour adjustment tool bar on the drop down on the right hand side of the screen.
Can anybody help?
thanks!!

1. Right Click (Cmd-Click) on one of the other headings in the Develop Panel (Basic, Tone Curve etc).
2. This will bring up a selection menu of which items you want to be visible.
3. Re-select "Adjustments" and the HSL/Color/ B&W should reappear.

Saving and reusing adjustment layers

Hi, I feel like what I'm trying to do should be easy, but I can't figure it out.
I have a set of files that I'd like to apply the same set of adjustment layers to. I opened one of the images, created the adjustment layers, and tweaked the settings until I was happy. Now I'd like to create an action that would apply this set of layers to multiple files in batch mode. I understand that if I were to record my adjustment layer creation, I could replay this, but I didn't record - I have a set of layers (I even saved them to a separate file) but no way to retrace my steps. I could do all this by hand by duplicating my adjustment layer group to files that I open, but I can't find a way to automate this. Any help?
Thanks,
Vladimir

If I correctly understand your question, then my naswer is yes - you can reuse adjustment layers. Say you have a psd file which contains a layer with your image and several adjustment layers on top. To apply those same adjustment layers to other images convert the image layer to a smart object and save the file as your primary image file. I expect the following simple sequence, which is actionable, can be put in a batch process though I've never done it as I can manually click through images as fast as I can hit the keys.
The main features of the action are to open the primary file and right click on the smart object. From the drop down list choose Replace Contents. This brings up a Place window from which you select ( double click) the next image and that image appears in Photoshop's main window with all adjustments applied. Click on save and repeat the process for the next image.
It is rare that I need the same adjustment layers to be applied to many images- it seems that often times each image requires slightly different adjustment settings. The above process, however, works for other operations as well, say filters (smart) or Calculations which I may apply to multiple images.
Paulo

HT1645 I did step 2 but my computer isn't giving me the pop-up in step 3 so i can't push an OK button. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no

I did step 2 in the "iDVD: Setting Encoding preferences" but my computer isn't giving me the pop-up in step 3 so i can't push an OK button in regards to the message. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no message pop-up appears.

You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck?

MSS Edit Appraisals and Authorizations

We are implementing MSS. We have setup structural authorizations so the manager can see his reports. We have the situation where previous year appraisals show up for an employee. However, the manager has changed recently. The manager cannot see/edit appraisals for his employee if the manager was not the original appraisor, even thow the appraisals show up in the list for the employee. Any ideas?

Hi,
An objective setting cycle encompasses the following phases:
Planning
In a planning consultation, the necessary qualifications and competencies are first identified for an employee and then concrete objectives and required performance levels are agreed. For example, sales targets could be defined and the employee could agree to take on specific tasks in a project, and so on. These aspects can be defined by the manager, by the employee or both. The employeeu2019s personal training and development requirements are discussed and entered in the objective setting agreement.
Review
During the review, the objectives agreed with the employee during the planning phase are checked and adjusted to reflect the current situation. The manager and employee discuss the possible need for support, establish whether the objectives defined in the planning phase are still relevant, and add further objectives or decide to delete obsolete ones. Furthermore, the manager can make comparisons between the objectives set previously and the employeeu2019s current performance.
Appraisal
During the appraisal, the manager and employee discuss the extent to which the employee has fulfilled the set objectives. They check and assess the employeeu2019s overall performance and the implementation of concrete set objectives. Any further training requirements or an overfulfillment of the objectives are identified in the different areas. The appraisal document is completed when the manager and employee agree on an valuation. As soon as the appraisal document is saved in the system as Completed or Approved, the employeeu2019s compensation can be adjusted automatically and the employeeu2019s qualifications profile can be updated
Get the proper information from following .
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=53773.

What happened to my computer's ability to play sound when I updated to OSX 10.8.2? I had a hard time updating from 10.8 to 10.8.2 and now that I have my sound is gone and not adjustable.

I have a 13" Macbook Pro running OSX 10.8 and when I tried to update to 10.8.1 through the Mac App store it didn't acknowledge that there was an update available so I went to the apple website and manually downloaded the update. When I attempted to update it that way the installer said that my computer did not meet the requirements of the update. That was strange as it was already running 10.8.
So I called apple care and then gave me instructions to restart my computer holding option+command+R and redownload Mountain Lion and after it finally finished, it installed but now I just noticed that my sound icon on the menu bar is greyed out and in system preferences I cannot adjust the sound output. I don't understand what happened, all I wanted to do was update my OS. If anyone has any solutions I'm open. I'm also going to set up a genius bar appointment.
Thanks.

I have a 13" Macbook Pro running OSX 10.8 and when I tried to update to 10.8.1 through the Mac App store it didn't acknowledge that there was an update available so I went to the apple website and manually downloaded the update. When I attempted to update it that way the installer said that my computer did not meet the requirements of the update. That was strange as it was already running 10.8.
So I called apple care and then gave me instructions to restart my computer holding option+command+R and redownload Mountain Lion and after it finally finished, it installed but now I just noticed that my sound icon on the menu bar is greyed out and in system preferences I cannot adjust the sound output. I don't understand what happened, all I wanted to do was update my OS. If anyone has any solutions I'm open. I'm also going to set up a genius bar appointment.
Thanks.

SubCon Purchase order and Subsequent adjustment

Hello All
I am having an issue where I have a Sub con PO and its components.
Goods Receipt is done and along with GR automatic Backflush of the components is also done.
When I try to do subsequent adjustment MB04 to adjust the consumption of one of the component ( Iam using -ve sign so that I can reduce the consumption that has happeend on the PO) for some reason the Movement type that is getting picked up is 546 (GI issue SC by-prod)- I am not using any by-product functionality anywhere like in BOM or PO etc not sure why this is coming up. I am expecting the 541/542/543/544 movements.
Any help in this regard will be highly apprciated
Thanks

Hi Pratap
In MB04 we need to put -ve sign when the consumptions need to be reduced and a +ve value when the consumption needs to be increased that is the way it works. The -ve you might be referring is in the BOM for by-product.
Please advice
thanks

I've lost the histogram - and other adjustment woes

I filed a rather long description of this to the Aperture Feedback, but as I suspect that is a "write only" channel I thought I'd ask here (and I did review a bunch of posts with no luck)
I have a brand spanking new MacPro quad, with 2 NVIDIA GeForce 7300 GT video cards (I mention this only because of Aperture's use of GPUs).
In summary, I imported a project that works fine on my MacBook Pro, but on my MacPro the histogram in the adjustments HUD is gone. When I try to make an adjustment, a HUGE black triangle appears where the preview image was, the histogram magically appears, I make the adjustment (the slider is not smooth), a full second passes and the preview is updated with the adjustment -- and, of course, the histogram disappears. When the system is feeling particularly nasty, the preview comes up completely black after the adjustment (although the thumbnail appears to be updated properly).
Suffice it to say I've tried everything but yank out the RAM and the GPUs... I've seen this on some images in other projects. I created a new Aperture library and loaded some images (from different cameras) -- all exhibit this behavior. I've stopped and restarted Aperture. I've shutdown and restarted the MacPro. I've reverted my profiles for the displays to the Apple defaults. I've started considering moving to Lightroom...
Aperture is such a wonderful program when it works... I've had a bunch of minor issues with the program over the past year I've been using it - but this is insane.
If anyone can provide some clues as to how to fix this I'd appreciate it.
Thanks,
- dave
Note: A small update to my post. I thought the histogram had disappeared, but upon closer inspection it is there -- but it reads as if it were a completely black image (e.g., all of the values are in the first column). Another clue...
Message was edited by: davebets

I should mention that i have NOT upgraded to iOS 5 on the 3GS and don't want to. Therefore, no iCloud on the phone.

PD [APPRAISALS AND REMUNERATION ADJUSTMENT]

Similar Messages

Maybe you are looking for