PD KSH version error installing EBS11i RHEL5
can anyone solve this error i am stuck to install EBS 11i onn RHEL5
Moderator Action:
Thread moved from the Oracle Linux discussion space,
To an EBS discussion space,
for closer topic alignment.
You state you are attempting to use RHEL 5.
That's not an Oracle product; it's a RedHat product. Thus the OL forum space here at OTN was not appropriate.
Your post suggests your actual issue is an EBS installation attempt.
Thus you should post to an EBS forum space.
Similar Messages
-
Version error installing SOA on Oracle Linux
Hi,
I'm trying to install Oracle SOA Suite 10g (10.1.3.1.0, soa_linux_x86_101310_disk1.cpio) on Oracle Linux 5, but I'm getting the following error:
Checking operating system version: must be redhat-Red Hat Enterprise Linux AS rele
ase 3, redhat-Red Hat Enterprise Linux AS release 4, redhat-Red Hat Enterprise Lin
ux ES release 3, redhat-Red Hat Enterprise Linux ES release 4 or SuSE-9
Failed <<<<
Is Oracle Linux not compatible with SOA? My understanding is that Oracle Linux 5 is basically Redhat 4:
cat /proc/version
Linux version 2.6.18-53.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Sat Nov 10 18:24:52 EST 2007.
Thanks,
YiYou require a patch 6339508 which provides replacement pre-requisite tests. To use it you need to add two parameters to the runInstaller command as shown below.
./runInstaller PREREQ_CONFIG_LOCATION=<PATCH_LOC>/prereq –paramFile <PATCH_LOC>/oraparam.ini
PATCH_LOC is the location where you unzipped the 6339508 patch. With these new parameters the installer correctly recognizes Oracle Enterprise Linux as a supported platform. Note that OEL needs some specific patches when used with SOA Suite and these need to be installed prior to running the installer. Check the documentation for details.
cheers
James -
unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"
Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
Hi hongkongpom,
Just wanted to say that after posting the problem, I had a chat with an iTunes' Tech Support, her name is Rebekah. My problem was resolved after that. Will list the chat history below in hopes that it may help you as well.
Good luck!
Samia
Chat Transcript
Friday, October 4, 2013 05:55 AM
Duration: 81 minutes 28 seconds
Rebekah:
Welcome to AppleCare chat support. Please give me a moment to look over your information.
Rebekah:
Hi, Samia! My name is Rebekah. If we get disconnected, please chat us back. http://www.apple.com/support/ipod/contactEnter the case number from the initial email we sent you. This gives the next advisor you chat with immediate access to your case history.
Rebekah:
Could you please confirm your serial number? I want to be sure we provide the best service possible for you, Samia!
SAMIA:
Sure, it's 8L8395UY2C5
SAMIA:
My problem is with iTunes.
Rebekah:
Thanks for that confirmation. Just a heads up, this is iOS Tech Support. We do support iPod touches, iPads, and iPhones, but not the iPod classic. But no worries! I can get you in touch with a phone Advisor who can get you in touch with the department that specializes in iPod classics and would be able to better assist you. Would that be OK?
SAMIA:
I wasn't able to install the new version of iTunes (version 11.1.1). The installation keeps failing. The they suggested the I install it manually and that failed too. I will attach the message I received.
SAMIA:
I don't have a problem with iPod.
SAMIA:
Just iTunes
Rebekah:
No problem! We can certainly troubleshoot iTunes as much as possible. It may come to the point that you may have to transferred, but we can do as much as possible during this chat!
Rebekah:
Thanks for the screenshot. It is a bit small so I am unable to fully see the message that you are receiving. What is the error message you are receiving?
SAMIA:
This is the message I received in case you weren't able to open the attachment: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
Rebekah:
Thanks for that info!
SAMIA:
Pleasure!
Rebekah:
What version of Windows (XP, Vista, 7) do you have?
SAMIA:
Windows 7
SAMIA:
Windows 7 Home Premium
Rebekah:
Thanks for that confirmation. I do apologize for the delay, Samia. I am researching this error code now. You mentioned trying to install iTunes manually. To be sure I am on the same page, what steps did you take to do that?
SAMIA:
Well when the indsatalltion failed I was given instructions to select Download Only from Tools and then install manually. When I did it, I window popped up with the following items: - AppleApplicationSupport
SAMIA:
- AppleMobileDeviceSupport64
SAMIA:
- Bonjour64
SAMIA:
iTunes64
SAMIA:
SetupAdmin
SAMIA:
I selected Repair in all of them instead of Remove and all worked but iTunes64
SAMIA:
That's when I received the message that I sent you earlier.
SAMIA:
By the way, this is the fir st time something like this occured. I never had problems with installation before.
Rebekah:
I completely understand what you're saying. Since that Repair did not resolve the issue, our best option is to uninstall iTunes and its components and redownload it. To do this, we will follow the steps in this article: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Rebekah:
First, we will want to quit iTunes and/or Apple Software Update if those are open at this time.
SAMIA:
Rebekah, the instructions you gave says, "For Windows XP, follow these steps to remove and reinstall iTunes and other software components for Windows XP."
SAMIA:
I closed all applications
SAMIA:
Also, my iTunes doesn't open anymore after the new failed installation.
Rebekah:
The section that says "For Windows XP…" is in case we opened up the wrong article, as we have the one for Windows Vista, 7, or 8. There is a link to click ("these steps") in those directions that would take us to the article for uninstalling on a Windows XP.
Rebekah:
So no worries! We have the right article!
Rebekah:
On the computer, we will want to click on Start > Control Panel. In Control Panel, we will click the "Uninstall a program" link.
SAMIA:
I thought so after doing a little exploration.
SAMIA:
done
Rebekah:
Alright, we'll want to select iTunes from the list of currently installed programs. Then we will click Uninstall. When asked if you would like to remove iTunes, let's click Yes.
Rebekah:
After the uninstallation is complete, we don't want to restart your computer if you're prompted.
SAMIA:
Done
Rebekah:
Then if you see other iTunes entries on the list, we'll want to remove them the same way.
Rebekah:
Then we will remove all instances of Apple Software Update the same way you removed iTunes.
SAMIA:
Okay, but do I have to remoce iCloud as well?
SAMIA:
Rebekah, I received the same error message again when uninstalling
Rebekah:
We actually do not need to remove iCloud. After the Apple Software Update, we will want to remove all instances of Apple Mobile Device Support
Rebekah:
How strange! Are you able to click past that and allow the process to continue or has it stopped it completely?
SAMIA:
I am unable to uninstall iTunes either
SAMIA:
Stopped completely
SAMIA:
I treied clicking Repair
Rebekah:
Alright, after trying the Repair option, let's see if it will allow us to continue uninstalling or not.
SAMIA:
I tried that but unfortunately, it isn't working. I still get that same message with error code 2324.
Rebekah:
This error code is not something that I am finding in my sources, Samia. So there is a chance that it is being caused with the Windows computer itself. However, I did find a link that may be able to help with uninstalling iTunes from Windows' support site: http://support.microsoft.com/mats/Program_Install_and_Uninstall
SAMIA:
Rebekah, you're a genius! It worked! iTunes is no longer there. What next?
Rebekah:
Awesome! I'm glad that worked!
Rebekah:
To be sure I am on the same page, what was the last component we uninstalled?
SAMIA:
iTunes
SAMIA:
Shall I remove the Apple Application Support, Apple Mobile Device Support, and Apple Software Update
Rebekah:
That is correct! However, we do want to uninstall it in the order I mentioned above. So Apple Software Update first, Apple Mobile Device Support next, and then Apple Mobile Device Support.
SAMIA:
Got it, but is the second one to uninstall Apple Mobile Device Support OR Apple pplication Support?
Rebekah:
The second one is Apple Mobile Device Support.
Rebekah:
The Application Support will be the last component we uninstall.
SAMIA:
Thanks! I'm on it.
SAMIA:
Done! ll 3 are gone, well 4 with iTunes. Now what?
Rebekah:
Awesome! Also, I just noticed that I accidentally typed Apple Mobile Device Support twice, I do apologize for any confusion! Now we will remove all instances of Bonjour and then remove all instances of Apple Application Support.
SAMIA:
There was only 1 instance with Bonjour. I don't know what the instances are for Apple Application Support
Rebekah:
Yes, Bonjour is often only listed once. Is the Apple Application Support listed at all?
SAMIA:
No
SAMIA:
Since I removed it
Rebekah:
Oh, perfect! If it was removed, we should be set!
Rebekah:
We have removed iTunes and its components now! From here, our next step is to restart the computer. Then once you reboot, you can redownload iTunes from apple.com/itunes
Rebekah:
That should allow you to download iTunes!
SAMIA:
Shall I downloaad the latest vesion?
Rebekah:
You will want to first restart the computer as shown in the article. That will ensure that this process goes smoothly and that everything was removed correctly! Then you can try downloading iTunes again.
SAMIA:
Okay, thanks Rebekah!
Rebekah:
You're very welcome! I'm glad I could help! And of course if you have any issue after the reboot and download, you can always chat us back, as chat is open 24 hours! You will just need to give your case number and the next Advisor would have all my notes!
SAMIA:
Thanks again for all your help, for I couldn't have managed with out it. Have a nice day!
Rebekah:
You're very welcome! I know how important iTunes is and I'm glad we could get you on a path to resolution!
Rebekah:
I hope you have a lovely day!
Rebekah:
It's been a pleasure speaking with you! Thanks for chatting with us Samia. If you don't have any more questions, select End Chat from the upper left corner of the chat window.
SAMIA:
Will do, thanks. -
"Invalid DOS version" error message when installing Tomcat in Windows98
I tried to install Tomcat 5.0 in Windows 98. At first, it produced "Out of Environment Space" error message. I then changed the "Initial Environment" from Auto to other values (bigger than 2816) for both startup.bat and shutdown.bat.
When I restarted the Tomcat, it produce "Invalid DOS version" error message. I thought about updating the DOS but previously when I had WinXP installed in computer, I couldn't access to the server due to the dos version issue.
Is there any way to handle this? I would really appreciate the help:) Thank you very much..no, use the serial number listed on the page where you downloaded acrobat 7, not your acrobat serial number
-
I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.
Adobe admits to a Flash problem here:
http://forums.adobe.com/message/6285851#6285851
YOu can apply the fix they show and tehn wait for them to fix the problem -
UPK 3.5.1 error on publishing: Unsupported office version is installed...
We have UPK version 3.5.1 and Microsoft Word 2010. we are getting in error while trying to publish: Unsupported office version is installed. Install one of the supported versions: Office XP, Office 2003 or Office 2007.
Is it any shortcut to be able to publish without upgradiing to 3.6.1? thanksHi User 902368,
I did some digging on our database since the release of MS Office 2010 there is no other way around but to apply the patch.
I am just a newbie and my senior tech did advise me that running UPK without the patch can be troublesome.
You have to follow Marc's instructions.
^_^ -
Error installing the Content version of Update rules
Hi experts,
While installing Update rule "0PA_C01 0HR_PA_0" from BI content following error is cming,
"Object Update rules E5ILYDNE80GVD52C5Y47ZBDKJ: Error installing the Content version."
Infocube , transfer rules are already installed. Datasource 0HR_PA_0 is also in place.
I have searched relevant quries in SDN.But i did not find the solution.
Could any one throw light on it?
Thanx and regards,
Ajit.Hi,
Is there any log that is generated ? If so you can check for the reason for failure. You can also post the details, which will help us to understand the issue better.
regards,
Gaurav -
Can somebody please help me, i can not work on my websites anymore. Thanks !!
ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installatie.
MSI Error message: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Third party payload installer Muse_2014_2_CC_LS24.msi failed with exit code: 1603 -
I am having an issue with an installer which I created with the Application Builder. I have a project that I have successfully deployed. Subsequently I created another project (and vi) which is based on a copy of the originals, both with new file names. In the renamed project file, I changed all file names, paths, and all resources, to reflect the new names. I also changed the installer’s destination and install folders, of course. I reset the executable’s version number (in the Build Specification properties) to 1.0 (the original was 1.3). I then successfully built an executable and the application installer. However, when I run the installer (setup.exe), it gives a dialog (after the license screen) that it “Cannot install” because a “higher version already installed”.
I’ve done exactly the same thing with other vi’s and projects of mine, and never had this issue. The installer correctly installs the newly created (and renamed) version where it is told to in the project file. Also, I’ve never had a problem deploying (installing) on my development PC either.
I have carefully checked and rechecked to make sure there is no reference to the original executable or paths. What could be causing this behavior? I want to keep the two projects completely separate, so simply changing the version to higher than 1.3 is not an acceptable solution.
Thanks to anyone in advance for any help and suggestions.
EdYes, LV 8.5 does NOT give me control over the GUID. In the project file there are three such strings:
"App_applicationGUID"
"App_INI_aliasGUID"
"App_INI_GUID"
They all have different numbers and none of them match the GUID or PackageGUID in setup.ini. I don't know if they are related or not, but usually it's not a good idea to mess with (manually edit) files like these (project, ini, etc.) unless you know what you are doing. (For example, I do edit the setup.ini file to change some of the [Dialogs] parameters, but that is based on direction from NI support.)
Anyway, like I said, I've made copies of projects before and never ran into this problem. At least I have a solution, however laborious, in creating a new project file from scratch.
Let me know if anyone has more thoughts on this.
Ed -
My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Hi there,
I really hope someone can help me as I am tearing my hair out trying to get this resolved!
I am working on a Server 2012 R2 server with RDS running. Before it was turned into a RDS server it had a copy of Office 2010 running as a trial to see would it work for the accounting package that is running for users via Remote Desktop. Trial worked ok
so it was converted into a RDS server. Now, as its a RDS it needs to run Office under a volume licence, which I have. However when trying to install I get the message: "Error 25004: the product key you entered cannot be used on this machine. this is most
likely due to previous Office 2013 trials being installed on the system."
In summary I have tried everything I can think of and find to remove all traces of the old Office from the machine but still this message persists. I have run the Fix It For Me uninstall from MS and it cannot find any Office installed. i have manually searched
through all of the Windows directories including Program Files and AppData and removed all traces of Office from there, I have searched the registry and removed all I can find from there.
Where or what file does the installer look at to see that a previous version was installed?
I cannot scrub this machine which I would have done long ago because there is another SQL Server based application running on it.
Really really appreciate anyone that can help me on this,
ThanksHi,
I have definitely heard your frustration, and I’ll try my best to help you.
Since Office 2010 installed on it before, you need to remove Office 2010 completely.
KB about this error:
http://support2.microsoft.com/kb/2792178
A similar issue is addressed here. Although this method is based on Office 2010, but we can have a try:
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Q_28475448.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Error: installing Java Add-in for Central instance
Dear experts,
i've installed the SCS and the Java Add-in for DB successful. While trying to install the java add-in for the central instance i get the following error:
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In for ABAP > MaxDB > Central System > Central Instance Java Add-In ( Last error reported by the step :TypeError: instance has no properties (in script NW_Addin_CI|ind|ind|ind|ind, line 109346: ???)
Thanks in advance.
DanielHi,
Check below thread:
Error installing SAP NetWeaver 2004s Java Trial Version (SP9)
Thanks
Sunny -
"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
ChrisI know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
[Device]
Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
Installed INF =
Previous driver package =
! Warning 0xE0000235: DriverPackageGetPath failed.
Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
Using RegDeleteKeyEx
!!! ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels -
Error installing iTunes 10 on Windows 7 64 Bit
I upgraded to Windows 7 from XP since I changed laptop. I did tried to install iTunes on this new machine (win 7 64 bit Corei7 processor and 4G RAM) but during the installation when the status screen states "Publising Product Information", I'm getting the following error message:
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x800736FD."
Following this message, the installer reverses the installation process and after a 10-15 minute wait, a screen comes up that says the Itunes installation was complete. Obviously it wasn't but that is what the message says. When you close out of that message, Itunes tries to start and this message pops up:
"Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall itunes, then install iTunes again.
Error 2"
Any help will be very much appreciatedHRESULT:0x800736FD
It's rarer to see these on Windows 7 than it is on Vista. Somtimes they're a bit easier to deal with on 7, too.
First, head to Windows Update and see if you can update the PC. If you can, and you collect updates without any errors, try another iTunes install.
If you get errors installing Windows Updates, double click on the failed updates in your Update history to bring up a small window containing alphanumeric codes for the erros. Are they also 800736FDs, or are you getting other error codes?
Maybe you are looking for
-
Hello I want to buy your iphone5 S of the U.S. site, but I want to use it in Saudi Arabia what is best option
-
AP Check not printing all of address on Vendor Master
Hello SAP Guru's, I have an issue where when we execute F110 for check run, it is not printing the complete address as we have under Vendor Master. For example, the check print is not showing the following from Vendor Master record: Building Code St
-
How to open epub file in iBooks using ANE(iOS) ?
hello, I tried to open epub file in iBooks using Native Extensions. But, AIR app has crashed when calling ANE method (following: OpenEpub). Have problems with how to access the epub file? Or another problem? MacOS:10.6.8 Xcode:4.2 FlashBulder:4.6 Fle
-
Hi every one! I have a folder with 2101 pictures in it. In list view, everything is fine. But in thumbnail view, right-clicking on any file past the 912th file and up to the 1820th file in the folder, I get folder information instead of file informat
-
Correct cheque but incorrect document in terms of posting date
Hi I have a problem. The document posted(f-48) incorrect in terms of posting date but the correct cheque (FCH5)is taken by the user and already sent to the vendor. How to rectify the situation. Edited by: Anand Arya on Dec 5, 2008 12:39 PM Edited by: