PdDoc.open(filePath) gives me an error message.

Hello,
I am using pdDoc.Open(filePath) in my application. Its working fine with Acrobat 8.0 in both Windows XP and Vista. But with Acrobat 9.0 in Windows Vista, I am getting the following error message. "There was an error opening the document. The file cannot be found".
After clicking OK I am able to continue my work. Please help me to solve this issue and thanks in advance for your help.
Thanks Mohd Mustafa SK

Hello, sarahehines.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

Similar Messages

My itunes will not open and gives me an error message

My itunes will not open and give me an error message of 126... PLEASE HELP

Hello, sarahehines.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

Lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite

lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite
it also says it will attempt to to fix the next time it opens it doesn't do anything

Check this thread. Your Previews Cache files are corrupted.
Re: preview cache?

HT1199 iTunes quits on opening and gives me the error message -45054? Does anyone know what this error message is all about?

I use iCloud for my music and recently deleted some duplicates from my desktop iMac (about a year old.) Then tried to launch iTunes from the laptop about a 2008 macbook and get the error message -45054 and it won't open.
Any ideas? Would upgrading to Maverick help or make matters worse?

Hi, kathysneedshelp.
Thank you for visiting Apple Support Communities.
Try repairing permissions in by selecting the Disk Utility in your Utilities Folder of Applications.
Using Disk Utility to verify or repair disks
http://support.apple.com/kb/HT1782
If the issue persists, try reinstalling iTunes by downloading it directly from our website.
http://www.apple.com/itunes/
Regards,
Jason H.

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.

My Reminders app will not open. When I try to open it, quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?

My Reminders app will not open. When I try to open it, it quits and gives me an error message: "Reminders quit unexpectedly while using the CalDAV plug-in." My Reminders is synced with my iPod touch, and it is fine on that. How do I fix it?
Also, the Calendar is loading very very slowly, and sometimes it quits and gives me the same error message as above.

The problem has been fixed with the most recent OS X software update.

Had to wipe and reload my computer, am trying to download web premium 5.5 but when i try to open and install gives me an error message of trouble extracting file try downloading again. How can i download?

Had to wipe and reload my computer, am trying to download web premium 5.5 but when i try to open and install gives me an error message of trouble extracting file try downloading again. How can i download?

You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

My old laptop crashed, and took my iTunes account with it. I got a new laptop, and want to sync my iTouch to my new iTunes account. It gives me an error message stating that I can't sync to multiple iTunes accounts, but I can't access my old one! Help!

My old laptop crashed, and took my iTunes account with it. I got a new laptop, and want to sync my iTouch to iTunes. It gives me an error message stating that I can't sync to multiple iTunes accounts, but I can't access my old one!
How can I get my new iTunes account to allow me to Sync my iTouch? The only option it gives me is to "transfer purchases" from my iTouch to iTunes, but that is only about 25% of my iTunes library-most of it is CDs I have uploaded. How can I Sync without losing all my music from my iTouch???
Also, I have lectures and photos, etc. on my iTouch that I don't want to lose.
I've tried a few of the iPod copy programs-the free ones and the ones you have to pay for, but I can't find one that will work for ALL my content on an iTouch.
Right now, I can't get anything from my iTouch to iTunes, and I can't update my iTouch with my new iTunes purchases, so I'm stuck! Help!

Also-I tried to use my backup hard drive, but I wasn't able to drag/transfer/send/move any of my muic files onto my iTouch when the iTouch was connected to my computer. I can't figure out why it won't let me do that.
The only thing I can see when I open my iTouch on my computer is my file with photos. I can't see videos, music, or anything else. What's going on?

Firefox will not open at all, keep getting error message with last 2 saved web pages on it

Yesterday, I closed Firefox. I had multiple tabs opened, so it asked me if I wanted to save them. I clicked YES and closed Firefox.
I had Google Docs open at the time.
Now, when I open up Firefox, everytime, it tries to load the 2 saved pages, then gives me an error message saying that Windows will try to find the solution to why it can't open.
I cannot use Firefox at all now.
How can I fix this?
I have re-installed Firefox completely and it does not work, it remembers my settings.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
See http://kb.mozillazine.org/Session_Restore

Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto.

Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to.

If you don't have a backup you can resort to give this a try:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

Installed iTunes and try opening it and get an error message

I have installed iTunes twice and uninstalled it aswell. I go to open it and it gives me an error message that the file is in a locked folder or that I do not have permission to open the file. What could this be? I havent been able to ue iTunes since I updated my iPhone to iOS 7. Really feeling like I made a mistake doing that.

Hey MinaMarie27,
There's actually an article that goes over recommended steps when you're encountering launch issues. I'd check it out here:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Delgadoh

Itunes gives me this error message This copy of itunes is corrupted or is not installed correctly. Please reinstall itunes (-42037) However, it will not install-- when i try to download from the net it says same message. How do i reinstall Itunes?

Itunes gives me an error message when I try to open. "This copy of itunes is corrupted or is not installed correctly. Please reinstall itunes (-42037) "
Howeever it says the same thing when i try to download from the app store. How do I get this reinstalled??

First uninstall your copy of Itunes--http://www.tekrevue.com/tip/uninstall-itunes/ (make sure you empty crash) Then you go to the applications website and reinstall it. Dont worry about losing any of your music because thats in a separate folder. Thats it---it works.

When trying to sync my new ipod nano it gives me an error message (13019)

Iv had this Ipod for about a month and never had this problem until now, it will go through all of my songs like its syncing them but instead of finishing it gives me the error message. Can anyone help?

Also-I tried to use my backup hard drive, but I wasn't able to drag/transfer/send/move any of my muic files onto my iTouch when the iTouch was connected to my computer. I can't figure out why it won't let me do that.
The only thing I can see when I open my iTouch on my computer is my file with photos. I can't see videos, music, or anything else. What's going on?

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open

Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which

Hello Dr.Help,
Thank you for providing so much information about the issue you are experiencing with iTunes. It sounds like you have tried reinstalling it, but nothing happens when you launch it. I recommend following the steps in this article to resolve launch issues with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M.

PdDoc.open(filePath) gives me an error message.

Similar Messages

Maybe you are looking for