PDE-PER001

when i click on test box on my form an alert popup
"PDE_PER001 internal error(depep2)."
and when i execute that form
FRm-30085 comes
my form was working fine but i just change the background colour of my form and that happens i dont know wht is it and y it is happend plz help me

i simpally closed all forms and my form builder as well
and again open that form and it is runing now without error
i cant understand y it happend
if any one know that plz tell me

Similar Messages

PDE-PER001 INTERNAL ERROR while generating pdf

Hello,
I am tryin to generate a pdf file from a report attached to menu.
But every time its showing me this error
PDE-PER001 INTERNAL ERROR
unhandled internal CA Error
But when i generate the same through report builder, pdf file get genrated.
I dont have any idea to how to resolve this problem.
Kindly suggest me some solution.
Thank you!

There are a lot of things that you do to try and fix strange errors like these.
1) NOT FORWARD COMPATIBLE
I think I have seen this error when you save a file in a newer version (Forms 9)
and then try and open it in an older version (Forms 6) - rather than the other way round
that you are describing.
Please provide the two versions of forms that you are dealing with.
2) TOO MANY FILES OPEN
This error can occur when you have too many files open in Forms Builder at once.
Does the problem occur when you only have one file open ?
Does the problem occur when you have started Forms Builder, then opened a single file ?
3) LOG OFF / ON
Strange errors like this can often be fixed by logging off, then close the file, then open it,
then logon, then do a compile all code (CTRL SHIFT K), then save.
After that you can do a compile (CTRL T) to create the runtime FMX
4) COMPILING
Files can be dependent on other files, so make sure you
Upgrade and Compile the files in the following order.
* PLL Libraries
open each library
Make sure you do this in the correct order.
the highest level libraries first as libraries can be attached to other libraries.
do a full compile (SHIFT CTRL K)
then an incremental compile (CTRL K)
- this second compile often fixed problems in the past, probably not needed now but worth a try
save.
* Referenced forms *.FMB and object libraries *.OLB
To upgrade these open each one, then save
You dont need to compile these.
* The actual form
disconnect, open file, connect, full compile code (CTRL SHIFT K), generate FMX (CTRL T), save, close, open
5) CONVERT TO TEXT, THEN BACK TO BINARY
File corruption problems can often be fixed by converting the file to a text file, then back to binary. In Forms 6 use "File -> Administration -> Convert" Forms 9 and 10 use "File -> Convert". Convert Forms from FMB to FMT and back to FMB again. For libraries use PLL > PLD > PLL. Object Libraries Same OLD > OLT > OLB. Also do the same for any referenced forms.

PDE-PER001 Internal error (scaba 18)

Hi,
I'm getting the above error while opening CUSTOM.pll in Oracle Forms Builder 6i.
I have copied all the .pll's in a folder from server then tried.
Thanks
kumar

Error 'PDE-PER001 Internal error (deplu 3)' when compiling form
http://www.orafaq.com/forum/t/70421/0/

PDE-PER001 Internal error (depep 2).

PDE-PER001 Internal error (depep 2).
What is this? This error comes while compiling forms designed in Form 6i.
And form is not compiled due to this.
I have seen this error first time.
Please suggest me.
Regards,

There are a lot of things that you do to try and fix strange errors like these.
1) NOT FORWARD COMPATIBLE
I think I have seen this error when you save a file in a newer version (Forms 9)
and then try and open it in an older version (Forms 6) - rather than the other way round
that you are describing.
Please provide the two versions of forms that you are dealing with.
2) TOO MANY FILES OPEN
This error can occur when you have too many files open in Forms Builder at once.
Does the problem occur when you only have one file open ?
Does the problem occur when you have started Forms Builder, then opened a single file ?
3) LOG OFF / ON
Strange errors like this can often be fixed by logging off, then close the file, then open it,
then logon, then do a compile all code (CTRL SHIFT K), then save.
After that you can do a compile (CTRL T) to create the runtime FMX
4) COMPILING
Files can be dependent on other files, so make sure you
Upgrade and Compile the files in the following order.
* PLL Libraries
open each library
Make sure you do this in the correct order.
the highest level libraries first as libraries can be attached to other libraries.
do a full compile (SHIFT CTRL K)
then an incremental compile (CTRL K)
- this second compile often fixed problems in the past, probably not needed now but worth a try
save.
* Referenced forms *.FMB and object libraries *.OLB
To upgrade these open each one, then save
You dont need to compile these.
* The actual form
disconnect, open file, connect, full compile code (CTRL SHIFT K), generate FMX (CTRL T), save, close, open
5) CONVERT TO TEXT, THEN BACK TO BINARY
File corruption problems can often be fixed by converting the file to a text file, then back to binary. In Forms 6 use "File -> Administration -> Convert" Forms 9 and 10 use "File -> Convert". Convert Forms from FMB to FMT and back to FMB again. For libraries use PLL > PLD > PLL. Object Libraries Same OLD > OLT > OLB. Also do the same for any referenced forms.

"PDE-PER001 Internal error (deppu 21)" Message!

Hello.
I use Form9i to build my form, when i want to add a trigger it yield the error message as flows:
"PDE-PER001 Internal error (deppu 21)!".
Please tell me the way to resolve this problem!
Thanks!

Hi,
REP-3335 is caused due to an abnormal condition. For more information, please refer to topic "Messages and Troubleshooting" in Reports online Help on OTN: http://www.oracle.com/technology/products/reports/index.html

PDE- Per001 Internal Error deplu 3 - Oracle 10g Forms

Hi all..
When I'm trying to execute a form in Oracle 10g forms developer I'm getting this error... PDE- PER001-Internal Error deplu 3
Please help me to correct this
Thanks in advance,
Nycy

Hi Arniko,
Thanks .. It worked...
But I have one more doubt ...
I saw in a forum that this happens due to :
The error is a procedure builder error often seen while compilation when multiple forms are opened in a form builder and can be solved by reopening the form builder or open one form at a time and compile... ( This also works )
Is that something related to any inbuilt procedure with Oracle 10g Forms builder...??Is there any way to correct that?
Pls help me...
Thanks in advance,
Nycy

Pde-per001 internal error (depli 36)

hi all
some times i recieve this error code in formbuilder6i when i compile a form:
pde-per001 internal error (depli 36)
can any one tell me what is it?
thanks
shoja.

Right I guess that the problem is that occasionally there is a problem reading from the PLL over the network and that's when the error occurs.
Try working with local copies and see if you get rid of the problem.

PDE-PER001 internal error(deplu3)?

when I compile the form,this error[PDE-PER001 internal error(deplu3)] happens.
why this error happens?
How to correct it?
Thanks in advences!

Thank you!
Sometimes re-open the form and compile,no error!
Sometimes re-connect database,no error!
And sometimes compile the form many times,no error too!
How strange it is!
But why happened this error?
What is the reason on earth?

PDE-PER001 Internal Error

PDE-PER001 Internal Error (REP-3335 unhandled internal CA error. depep2).
The above error happens most often when reports, sitting idle on my workstation, times out from the database connection. Once this error is displayed, nothing can be done with Reports, i.e. one can't save the file, re-connect to the database, or even exit the program (with 'x', /File/Exit, or alt F4). The only thing is to open the Windows task manager and end the process manually.

Hi,
REP-3335 is caused due to an abnormal condition. For more information, please refer to topic "Messages and Troubleshooting" in Reports online Help on OTN: http://www.oracle.com/technology/products/reports/index.html

Error: PDE-PER001 Internal error (deprn 2)

When stepping trough my code in debug mode I got the above error while opening my cursor. When running this code from my form, it is not working either, but it is giving me no messages.
All my other cursors are working fine.
Here is the code i am using:
PROCEDURE Facturatie (vergdatum in DATE, grondkamer in NUMBER)IS
verzoek_rec NUMBER(10);
datum_klaar DATE;
rb_datum DATE;
cursor facturatie_cur (fa_begindatum in date, gk in number)
is
select verzoek.verzoek_id
from ovg.ovg_verzoek verzoek
, ovg.ovg_behandeling behandeling
where behandeling.datum_gereed is null
and behandeling.begindatum = fa_begindatum
and verzoek.verzoektype IN ('toetsing eenmalige pacht', 'registratie teeltpacht')
and behandeling.behandelstap = 'RB'
and behandeling.verzoek_id = verzoek.verzoek_id
and verzoek.ins_relatie_nr = gk;
BEGIN
datum_klaar := TRUNC(SYSDATE);
rb_datum := vergdatum + 1;
IF NOT facturatie_cur%ISOPEN THEN
OPEN facturatie_cur (trunc(rb_datum), grondkamer); -- This line gives the error
END IF;
LOOP
-- Haal record op
FETCH facturatie_cur into verzoek_rec;
exit when facturatie_cur%NOTFOUND;
END LOOP;
CLOSE facturatie_cur;
END Facturatie;
Somebody saw this before???
thanks in advance,
Axel

This rather cryptic message is rare I have found that it means either
The cursor either didn't return any rows
or
There is a permissions problem on one of the tables
or
There is a problem with the argument you are passing to the cursor
This last looks most likely - Could you be getting precision or conversion errors...?

PDE-PER001 Internal Error (deppu21)

I'm using forms 6i with Oracle 9i, now getting this error whenever adding new pl/sql modules. even if the form is new (empty!). I'm waiting for a solution two weeks now. Please help...

even if the form is new (empty!)Can you open and modify ANY form? Sounds like maybe an installation problem.

PDE-PER001error problem.

When I use the debug mode to dubug the webutil. there is an error window pop-up:
PDE-PER001
Internal error (sdeji 1 10)
What reason will it be?
Can any one help on this?
Thanks!
John

These are the imports:
import org.eclipse.core.commands.AbstractHandler;
import org.eclipse.core.commands.ExecutionEvent;
import org.eclipse.core.commands.ExecutionException;
import org.eclipse.ui.IWorkbenchWindow;
import org.eclipse.ui.handlers.HandlerUtil;
import org.eclipse.jface.dialogs.MessageDialog;
and this are the dependencies:
     <dependency>
          <groupId>swt</groupId>
          <artifactId>jface</artifactId>
          <version>3.0m8</version>
     </dependency>
     <dependency>
          <groupId>org.eclipse.core</groupId>
          <artifactId>commands</artifactId>
          <version>3.3.0-I20070605-0010</version>
     </dependency>
     <dependency>
     <groupId>org.eclipse.ui</groupId>
     <artifactId>workbench</artifactId>
     <version>3.3.0-I20070608-1100</version>
     </dependency>
They relate directly to the imports as I see them. But I don't get any errors unless I use the
          IWorkbenchWindow window = HandlerUtil.getActiveWorkbenchWindowChecked(event);
          window.getShell();
But maybe its not a good idea to move PDE to maven.

Error in generating HTML, PDF format

Hi guys
I am using Oracle Reports 6i with ORACLE 9i Database.
After generating my report when i tried to generated report output in HTML or PDF format then system return following error message.
PDE-PER001 Internal error (REP-3335. Unhandled Internal CA Error. depep 2).
Remember when i tried to generate HTML or PDF format on other PC file generated successfully.
Best Regards.
Hassan Raza

hello,
you might want to contact oracle support services. maybe you need a patchset or so.
thanks,
ph.

Graphics 6.0 connect Oracle 8i on NT = Error

Hi Experts:
I face following error messages when I using Graphics 6.0 to connect Oracle 8i on NT. I failed to connect Oracle Database.
ORA-01009: missing mandatory parameter
PDE-PER001 Internal error (aaaac 44 24323,,0, ORA-24323:value not allowed).
Would anyone help me?
Thanks a lot!
Tony Sit

Hi.
Do the following.
Put into connect string the alias database.
null

.olb object library cannot open file in 11g - migration from 10g to 11g

I have an object library (.olb) that will not open in Foras 11.1.1.2.0. It opens fine in 10g. I have tried converting it to ascii (.olt) but it will not creat the binary filie in 11g - get PDE-PER001 Internal Error (cakaa 2) when I try to convert any ascii file from 10g into 11g.
I have tried using frmplsqlconv, the conversion tool on .olb but get following error when it is run: ERROR opening easstnd.olb :oracle.forms.jdapi.JdapiStatusException: Failed to load olb
Check subclass and library dependencies
Any help appreciated!
Kim

Kim,
We are not migrating yet, and we have not started converting all our forms and reports, but for the tests we have done, I never had to use frmplsqlconv (in fact, I don't know what it is). What I have done is:
1) As I told you before, I copied everything (forms, reports, etc.) we have to a new location.
2) I opened ALL the pll files with Builder 11g, saved them, and generated the plx files. The only problem I encountered here was that with some plls, Forms Builder crashed when opening them. I had to open those with Forms Builder 10g, and remove program units one by one until I found the culprit. After removing the program unit causing the crash, I opened the pll successfully with Forms Builder 11g, and created the program unit I had deleted.
3) After all plls were generated, I opened the forms I wanted to test, saved them, and generated the fmx files.
4) Same thing with reports (rdf and jsp files).
I have never gotten an error in Builder when closing plls, and we don't have either .fmt or .pld files.
Carlos

PDE-PER001

Similar Messages

Maybe you are looking for