Pdf/a for default "save as type"

Hello
I have one question about setting default save as type.
I get images from scanner, after that I go to "Save as" and I select location, tipe in name of pdf and choose save as type. Under default setting *.pdf is selected but I want to use *.pdf/a as default format for new pdfs.
Is there any option to make it default save format?

I don`t know if you understand me. When I go to »Save as type« I want to have pdf/a option as default option. I don`t want to change it ewerytime I want to save new document.
Please, take a look at pictures..

Similar Messages

Exporting to MS Excel - default "save as" type

We have written code in our application that exports the
results of the in MS Excel format and everything works fine except
for one minor thing using IE. When the user is prompted, they can
either "open" or "save". If they choose "save", it saves it fine as
a MS Excel file type. However, if they choose "open" (which does
open perfectly fine in Excel), but then they later choose the "Save
As" option from MS Excel's menu, the default "Save As" type now
becomes "Web Page (*.htm; *.html). It actually saves fine as an
Excel document, but our customers are concerned about it because
this is going to be a public application and they are worried that
it might confuse the end-users. So what I'm really asking is if
there's a way to programmatically control the default "Save As"
type from within MS Excel? I've attached a small snippet of our
code which details how we are performing the export.

<cfsetting enablecfoutputonly="Yes">

<cfheader name="Content-Disposition" value="attachment;
filename=AcctOpsRptSpendAgCat.xls">
<cfheader name="Expires" value="#Now()#">
<cfcontent type="application/vnd.ms-excel">

Hi,
I think excel can display only 11digits,that might be the problem its showing error.
Refer : http://support.microsoft.com/kb/65903
Regards,
Srikanth

Looking for a way to set my own destination for default save as for pdf's

Adobe reader always wants to save files I open online to a temporary directory and I would like to set a specific location on my C drive. It wouldn't be so bad, but Adobe resets after I save every file to trying to save to the temp directory even if I have another copy open that saves to the directory I want.

None of the above.
First, the specs for gigabit Ethernet would seem to be fast enough, but Ethernet is a packetized delivery system and the packets of data do not always arrive in the same order they were sent, and then they need t be re-ordered for video playback. Potential result: Dropped frames.
Second, a PC cannot be used as a file server for Final Cut Pro editing.
Third, having 5 or 6 computers banging away at a single computer would also tend to result in dropped frames.
What you really need is a SAN, a Storage Area Network. Those tend to be pricey. There is an alternative that might be a bit more budget friendly, but it cannot be used the way you have specified.
You could install external drive arrays on all computers and a gigabit Ethernet switch. Then use the Ethernet to copy needed files between systems. It is sometimes possible to edit from one workstation to another using gigabit Ethernet, but it invites dropped frames, so I don't recommend it.
BTW, when you say SD, do you mean uncompressed 601 video, or DV? Uncompressed 601 video is 21 or 28 MB/sec/stream. DV is 3.6 MB/sec/stream. Big difference in overall bandwidth requirements for what you'd like to do.
IMO, your best bet would be to bring in a consultant/technician who can spec out a system for you. Don't try to do it yourself.

How do you set default save file type

My Photoshop when I choose save as is choosing TIF as the default file type after opening a raw file. I want to choose PSD as the default. I cannot figure out how to change the setting to raw.

Hi, Unfortunately, Photoshop will chose a format that fits the minimal requirements of a file according to the absence/presence of layers.
You could go to the feedback website, http://feedback.photoshop.com and ask for a preference to set the default file type.

Change default save file type to gif

I've seen people submit some solutions but it requires changing codes of the files.... is there a simpler way to do it? I don't understand why it's saving as a jpg file... the older versions used gif as the default for save as web...

That is odd. What version of Ps are you using? Both CS6 and CC 2014 hold the last used format (GIF) for me.. First, try holding Alt (Win) or Opt (Mac) with Save For Web open - the "cancel" will become a "reset" button. Now try again. Also, when you press Alt/Opt you should see the "done" will become a "remember."
Benjamin

Defining Top Directory for default "Save"-location of generated code

LS,
In a previous project for an other client I was able to define a top directory for saving all the generated code to a specific network location.
In version 9.0.3 I chose the module, right click to access 'Configure', and then under "Top Directory" (I think under "identification"-submenu) specify the designated target directory.
Now in version 9.2.0.2.8 I try the same. It's similar, in the "Configure" properties there's also the "Top Directory" field.
Putting a specific network location there however is to no avail.
Without having any directory specified there, it always pointed towards my 'windows home' directory, e.g. c:\winnt\documents and settings\<my_name>.
Specifying the desired network directory changed this, but unfortunately it's not pointed to what I want, but to d:\oracle\owb92\owb\bin\admin (thus in my OWB-home).
Anyone any idea whether I need to specify something else as well?
Cheers, Patrick
ps
Unfortunately the User Guide is not very helpful, only one occurrence of "top directory", under "Configuring Target Modules" paragraph 7 (page 223) but without any explanation whatsoever :-(

I have reproduced and filled a bug for this problem (3845373).
Regards:
Igor

Save as type shows default as web page instead of excel

Hi.
After exporting the data to excel,When we try to do a save as to the excel,the default type is shown as '"web page".We neded the default save as type to be shown as excel...
Any pointers would be of great help
Thanks in advance
Bhagyarekha.

Hi ,
for that it needs of some HTML code i guess..
plz check this for this setting:
[How do we change the Default File Type to Excel|http://www.velocityreviews.com/forums/t153185-export-to-excel-default-file-type-excel.html]
thnks.

Saving a file - Save as type

I would like to have a file-save dialog with the standard drop-down list with pre-defined file types as seen in most programs today. However, in LabVIEW I cannot find a simple way of doing this. Any suggestions?

LabVIEW-guru,
Thanks for your suggestions.
Before I posted this question I was actually contemplating on writing my own VI for doing this. I started the effort but soon I decided to not continue. Why? Well, why did I want this functionality in the first place?
My goal is to have a LabVIEW application that does not shine “I am written in LabVIEW”. With LabVIEW 6i it is almost possible to do this. Almost. I am a Die Hard supporter of LabVIEW and I am more than happy with the power LabVIEW 6i gives me in creating programs for controlling my measurements.
Ok, so what options did I have for this particular application. The obvious solution is to first have a pop-up dialog that asks for the desired format. The program
then uses this information when calling the standard dialog for saving a file. However, doing this leaves behind a sense that this is a home-brew solution. The suggestion you had of writing my own VI seems the best way to do it. But! The listbox, that one needs to list the directory, with its symbols does not look exactly as the windows equivalent. I have not figured out how to get the symbols in color. Also, I faced problem with the dialogring used at the top for selecting higher level directories. It seems that I cannot use symbols in it. Those two problems defeat the purpose by writing my own VI. If I can’t get it to look like a standard save-dialog, I might as well go for the fist solution, which is by far easiest, using an extra dialog asking for the file format.
But who knows... in LabVIEW 7i (?) I might be able to just wire an array of strings to the file dialog to be used for the Save-as-type selection.... If NI is listening...this would be a neat feature!!
Thanks a
ll for being part of DE! It is a big help for us all! /Mikael Garcia

Can't find instructions for setting a PDF form to allow users to type in the fields and save the form. Thanks

Can't find instructions for setting a PDF form to allow users to type in the fields and save the form. Thanks

Hi,
Have a look at this page Acrobat refers to them as "Reader Extended PDF", Adobe Acrobat X Pro * Enable Reader users to save form data
Regards
Bruce

How do I change which application is the (default) for a given file type?

For .pdf files, I have set the application behaviour to "Always Ask", because sometimes I want to open the pdf, sometimes I want to save it. So far so good.
Now, when I want to open the .pdf, I have added an application to the dropdown list, so now I have "Adobe Reader 9 (default)" and "okular".
The problem is this: I *never* open using Adobe Reader. I always want to use okular, but Adobe Reader always appears first on the list, as it is the 'default'. This means I always have to click on the dropdown and select "okular", i.e. an extra step every time I want to open a pdf.
How do I change which application is the default?

Yes, I know that. That was the first sentence of my question, but it is not the problem I have.
I want to change which application is the (default) for a given file type, and this cannot be done from the settings.

How do you change the default save as directory when saving a PDF file to your hard drive?

This is the on-line help instructions on this site:
Downloading a PDF file to your hard drive
You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
To download a PDF file from a link:
1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
2. In the Save As dialog box, select a location on your hard drive, and then click Save.
My issue: I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in. I got lots of directories and I wish I could change the default setting for the save as directory. Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.

There is not a way to set the default location from all the forums i searched in the last couple days.
Russ

Set default filename for file save dialog on Save button click

Hi,
I am using AxAcroPDF (version 9.0) control to view pdf files in windows forms (C#). The pdf loads into the viewer in the form. Now, when I click on the Save button in the viewer, a Save dialog pops up with a default filename having complete path info.
If I have loaded the pdf file into AxAcroPDF viewer with filename:
"C:\Documents and Settings\KB_Kravi\My Documents\CustomerList.pdf"
then in the save dialog, the default filename will be:
"C_Documents_and_Settings_KB_Kravi_My Documents_CustomerList.pdf"
Is there any option to set the default filename in the save dialog to some short name, instead of this lengthy name?
Thanks,
Ravi.

Hi,
I've found a solution.
public void Open(string filePath)
axAcroPDF.LoadFile(filePath);
//this will set the correct name in the save file dialog.
axAcroPDF.src = filePath;
Thanks for your help.
Freedon

How do I save PDF files by default to the folder of the source file?

How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?

I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
Maybe one of the settings in about:config controls that?
pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere?

SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working

So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.

Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration:            Member Workstation
OS Version:                  6.1.7601
Site Name:                   Default-First-Site-Name
Roaming Profile:             N/A
Local Profile:               C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS CSE Policy
        Windows SBS Client - Windows Vista Policy
        Windows SBS Client Policy
        Update Services Client Computers Policy
        C-Create Syntiro Root Folders
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
        Windows SBS Client - Windows XP Policy
            Filtering: Denied (WMI Filter)
            WMI Filter: Windows SBS Client - Windows XP
    The computer is a part of the following security groups
        BUILTIN\Administrators
        Everyone
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        This Organization
        OPTI9020-01$
        Domain Computers
        System Mandatory Level
USER SETTINGS
    CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS User Policy
        Windows SBS CSE Policy
        Small Business Server Folder Redirection Policy
        U-Word 2013 Default Save Location
        U-Office 2013 Disable Backstage
        U-Office Disable Start Screen
        U-Office Trust Center Settings
        U-Word Autorecover Location
        U-Word Autosave Interval
        U-Word Disable Capitalization First Word
        U-Word Set Arial Default Font
        U-Word UI Customizations
        U-Power Plan Settings
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
    The user is a part of the following security groups
        Domain Users
        Everyone
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        CONSOLE LOGON
        NT AUTHORITY\Authenticated Users
        This Organization
        LOCAL
        Windows SBS Link Users
        Windows SBS Fax Users
        Windows SBS SharePoint_MembersGroup
        Windows SBS Folder Redirection Accounts
        Windows SBS Remote Web Workplace Users
        High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet.

Prompting a "Save As" dialog for an accepted mime type

Hi ,
I am using the following code to prompt a "Save As" dialog bod for an xls file:
response.setHeader("Content-disposition","attachment; filename=test.xls");
This does work, it prompts the save as dialog box with the name "test.xls" if i click on save. However if i click on open, it displays an error saying the file could not be found.
Any idea how to specify a custom file name for an accepted mime type?
Thanks in advance

Ok let me try & be more clear.
I have a JSP page. In this page there is an "Create Excel" link. When this link is clicked, the JSP dynamically creates the data. Then the following code:
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition","attachment; filename=test.xls");
This causes the file save dialog box to be created. This dialog box has "open" & "save" options.
When the save option is clicked, the user is prompted to save a file named test.xls. However if the user clicks on the "Open" dialog box, then the file is not opened,i get an error message saying the file does not exist.
If i dont specify the
response.setHeader("Content-disposition","attachment; filename=test.xls");
Then the file save dialog box displays a default filename which is the same as name of my servlet. This works for both Open as well as save options.
I hope i have not confused you further..:)
Please help!

Pdf/a for default "save as type"

Similar Messages

Maybe you are looking for